[Q] [q] USB BRICK - Devs PLZ HELP!!! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.

I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.

kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.

ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app

praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?

Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).

kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho

Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.

I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.

darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!

ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.

darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work

I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?

abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.

i had the same problem before...try changing the rom ...that worked for me

ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.

have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?

I have the same problem ... :crying:

nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.

Joined the group of USB Brick ....

Related

Replacement I897UCKB2 build is not seen by Windows 7

I have two windows 7 pcs that both recognized my replacement I897UCKB2 phone that I got a little over a week ago. I installed Kies on one of them to upgrade my wife's Cappy to UCKB1. I connected my phone and saw an error that it wasn't recognized. I have uninstalled KIES, the drivers, rebooted, cleaned out Samsung registry entries, rebooted (many times), tried different ports (including on the back), etc - no dice. I tried the other pc which hasn't had any changes and that doesn't recognize it either.
I know the cable is good because my wife's UCKB2 (was replaced as well) is seen no problem using the same cable and computer.
I have tried with my phone in debug and not - mass storage, KIES, ask on connection - etc. I did previously root the phone with SuperOneClick on this build. I was about to flash a custom ROM tonight after waiting a bit but now I can't get any computer to see it although the phone does start charging. I haven't yet tried linux and heimdall but that is about the only thing I can think of at this point.
I started wondering if Kies somehow caused a problem on the phone - maybe because it was rooted? I tried restoring CWM since I have Titanium backup working and busybox, etc. In CWM I tried "reboot into recovery" and then I see the original 3e recovery. I tried "reinstall packages" and it fails the signature verification. I have flashed ROMs many times in the past and have never been "stuck" like this... Any ideas?
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
crt60 said:
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
Click to expand...
Click to collapse
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
RichMD said:
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
Click to expand...
Click to collapse
I had a friend who had that problem. When he plugged his phone into his computer, the phone would start charging but Windows wouldn't even play a notification sound to show the phone was plugged in. He couldn't access USB storage mode or anything. He called Samsung and was told his phone would need to be reflashed. His three button combo didn't work, so we bought a jig on eBay. We could get the phone into download mode that way...but Windows still/I] wouldn't recognize it. He called Samsung again and they replaced it under warranty, without any hassle.
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
pwneman said:
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
Click to expand...
Click to collapse
Thanks for the replies. I know the USB drivers are good because I can easily mount USB storage on my wife's captivate - same exact I897UCKB2 build with the same cable. Additionally, a second pc won't see my phone even though it did before. I have tried at least 6 different ports numerous times. I am thinking I need a replacement.
My question now is that it is rooted with busybox, etc and I can't use an unroot program from a PC. Will a factory reset under settings (not CWM) erase all traces of root?
Sent from my SAMSUNG-SGH-I897 using Tapatalk

[Q] Phone semi bricked and unknown device in download mode

Hey all,
I've got a problem related to my Micro USB port (at least I think it is).
[Long story]
I've got a very annoying issue right now. Today I flashed Team ICSSGS RC4.1. Later when I connected my Galaxy S to my PC with the usb cable, no recharging icon appeared and my pc did not react to the connection at all.
Thinking it was a bug in RC4.1 (as OneCosmic RC 2.3 had the mass storage issue) I searched the ICSSGS thread, but not a single issue about mass storage mode was posted. So I flashed Devil kernel, hoping to fix it, but it didn't. Reflashed RC4.1, but problem still persisted.
I went radical and recovered a nandroid backup in CWM of ICSSGS RC3.0 (the one is was running earlier today), but somehow the recovery failed and left me with a semi-bricked phone. (Actually the 2nd time in a row when recovery semi-bricked my phone.)
Only download mode works. Recovery and normal boot bootloop.
[/Long story]
In short:
When connecting to PC to flash with Odin:
-At first the PC did not even notice the phone being connected through USB. Nothing happens.
-After blowing in the contacts of the Micro USB port, PC recognizes connection, but gives "Unknown device" error upon connecting. Reinstalling Samsung drivers does not work at all. Tested on laptop and home PC.
-Somehow I always have to blow into the Micro USB port to create contact and to get the PC to recognize a connection. But that's about it. "Unknown device" every time.
-When I plug in wall charger, the big battery icon appears, but stays grey all the time and after half a minute the phone boots, starting the bootloop.
Could it be that my Micro USB port is broken?
Any solution for this?
Thanks in advance!
I feel so stupid for recovering that nandroid backup. Otherwise my phone would still be working...
you will need the nexus drivers for your comp found here : w w w.multiupload.co.uk/BUCFT8M42 as your samsung drivers are no use now.
Thanks for your advice: Going to test it right away.
Unfortunately your link does not work for me.
I had the same problem but replacing the cable solved it.
Sorry for the duff link http://www.multiupload.co.uk/BUCFT8M42N
japperrrr said:
I had the same problem but replacing the cable solved it.
Click to expand...
Click to collapse
Tested this morning with someone else's cable, still the same issue.
Tried the Nexus driver, but still nothing. Also having troubles again to let the usb connection register. It connected after cleaning it, but now it does not seem to connect at all.
Could it be that the phone is completely busted and therefor breaks usb connection?
Haven't heard such a story yet, but is it possible?
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Same Issue cant fix
Hey guys im glad to see others are having the same issue but i cant seem to fix mine.
Assume im an idiot and ive missed something out but ill explain my situation....
Galaxy i9000 - windows 7 32bit - put ics on it a few weeks back following a guide on youtube (had never used odin or anything like that before) got it working but now have no usb comm options in the ics settings. now when i plug the usb (when it does detect at all) it says driver havent worked - device manager shows unknown device - i try update the driver and it says the best driver is already installed.
Im completely stuck and want to revert back to gingerbread so i can use my usb functions again. If i can get odin to see my phone again ill be relieved.
Any ideas?
Cheers guys! Seán.
subcultural said:
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Click to expand...
Click to collapse
dieselno7 said:
Any ideas?
Cheers guys! Seán.
Click to expand...
Click to collapse
USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
But most of all, check your usb cable and try switching to another USB port after rebooting your PC

[Q] Unkown device on bricked phone

Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.

USB connection to PC not working

My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
ssyed said:
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone.
Here is a list of things I've already tried to fix the issue:
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM (without pc)
6. Installed Paranoid Android 0.2
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
If anyone can offer any help that would be great.
Thanks in advance.
Click to expand...
Click to collapse
Try another USB cable.
tknguyencsu said:
Try another USB cable.
Click to expand...
Click to collapse
As I have mentioned in my post that I've already tried multiple different cables, including the original.
Could be factory defect. flash original rom and take it to service center.
dsmas said:
Could be factory defect. flash original rom and take it to service center.
Click to expand...
Click to collapse
Phone used to work perfectly fine before. Already flashed original rom, it did nothing. And I've already talked to Samsung. They won't help me.
I've already mentioned that in my op! I would be nice to hear suggestions/solutions other than the ones I've mentioned.
Can anyone please help me out with this? I even tried cleaning the usb port a bit more, but no avail. I am guessing the file that recognizes a PC connection got corrupted some how. Anyone know how to update or replace that?

LG Optimus black P970 USB Bricked

Please can someone help me, I have an LG P970 but the USB port seems to be bricked. The phone charges when connected to the computer but nothing else. When connecting the phone to the computer, the computer does not see the phone and the phone does not come up with any usb connection mode.
For this reason I rooted my phone and updated it to the latest version of Zeus rom, but this didn't fix the problem. The phone still just charges on the computer but that's all it does.
I think the phone USB drivers are faulty or need resetting. Is there any software APK I can download to fix my phone.
Thanks for any help.
Tokool said:
Please can someone help me, I have an LG P970 but the USB port seems to be bricked. The phone charges when connected to the computer but nothing else. When connecting the phone to the computer, the computer does not see the phone and the phone does not come up with any usb connection mode.
For this reason I rooted my phone and updated it to the latest version of Zeus rom, but this didn't fix the problem. The phone still just charges on the computer but that's all it does.
I think the phone USB drivers are faulty or need resetting. Is there any software APK I can download to fix my phone.
Thanks for any help.
Click to expand...
Click to collapse
Reinstall LG USB drivers.You can try to connect your phone to PC from CWM -> go to mount and storage -> mount usb storage
DaemonOnx said:
Reinstall LG USB drivers.You can try to connect your phone to PC from CWM -> go to mount and storage -> mount usb storage
Click to expand...
Click to collapse
Okay I go into CWM recovery >> mounts and storage >> mount usb storage >>unmount
then I reboot the phone. but things are still the same.
Tokool said:
Okay I go into CWM recovery >> mounts and storage >> mount usb storage >>unmount
then I reboot the phone. but things are still the same.
Click to expand...
Click to collapse
lol.Man.You reboot intro recovery -> mount and storage -mount usb(you don't unmount).
You must have the phone conected to pc via usb.Then you will able to acces your sd card
To me it seems more like a driver issue more than your phone usb not working, try installing the latest drivers as DaemonOnx said
DaemonOnx said:
lol.Man.You reboot intro recovery -> mount and storage -mount usb(you don't unmount).
You must have the phone conected to pc via usb.Then you will able to acces your sd card
Click to expand...
Click to collapse
The problem is that when I go into '>> mounts and storage' the only option available to me is - unmount. There is no 'mount usb option'
By default I select unmount - to which as you say nothing happens.
Happy to try further options if you have any?
Edit - reread OP, response invalid
Tokool said:
The problem is that when I go into '>> mounts and storage' the only option available to me is - unmount. There is no 'mount usb option'
By default I select unmount - to which as you say nothing happens.
Happy to try further options if you have any?
Click to expand...
Click to collapse
Have you reinstalled the drivers in your pc?
Tokool said:
Please can someone help me, I have an LG P970 but the USB port seems to be bricked. The phone charges when connected to the computer but nothing else. When connecting the phone to the computer, the computer does not see the phone and the phone does not come up with any usb connection mode.
For this reason I rooted my phone and updated it to the latest version of Zeus rom, but this didn't fix the problem. The phone still just charges on the computer but that's all it does.
I think the phone USB drivers are faulty or need resetting. Is there any software APK I can download to fix my phone.
Thanks for any help.
Click to expand...
Click to collapse
You most likely have problem with your pc LG drivers.
Download drivers by finding the link for LG driver on this page: http://forum.xda-developers.com/showthread.php?t=1448803
Install the drivers and try connecting and it will work
droblack said:
You most likely have problem with your pc LG drivers.
Download drivers by finding the link for LG driver on this page: http://forum.xda-developers.com/showthread.php?t=1448803
Install the drivers and try connecting and it will work
Click to expand...
Click to collapse
Hi thanks for this. However, the link to the usb drivers is broken. I have installed the usb drivers from the lg website and I know they work fine because I have now tried connect a friend's LG optimus black to my computer and the computer and phone both recognise each other. So I know it's not the usb cable or usb drivers on the PC. I have also installed the LG usb drivers on my laptop and spare computer, however again I have the same problem - phone only charges.
When this problem initially occured about a year ago I sent the phone back to LG and they did some sort of software refresh, which solved the connection problem for a few months, but then things went back to the way they were. I then thought it may be a PC issue so I downloaded drivers and connected my phone to the laptop and everything worked well. However, again, a few weeks later, things reverted back to the same problem. The phone only charges on both PC and laptop now.
Hope you can understand my frustration.
Someone must know something out there? How do I fix this stupid USB problem?
Tokool said:
Someone must know something out there? How do I fix this stupid USB problem?
Click to expand...
Click to collapse
LG service center? you've pretty much tried all I would've
Last time I took the phone there, I was told it might have been the phone port software corrupted. Whatever that mean. If I can't find a fix to this I will need to somehow unroot the phone and try to get it back in its unrooted state to LG (not sure if that is possible) else they probably won't fix it.
I'll keep looking,
thanks for your help.
You are using the the proper usb cord. I know I have a couple. The one will charge only.
Yes I am using original cables, I have three of them. They all work on my Friend's OB but not on mine. I am convinced it's a phone software issue. This has happened with three different computers - when you first install LG software on the computer, the phone connects okay for a few weeks and then loses connection, and I can never get it connected again.
When LG refreshed the phone software for me the phone worked properly for a little while and then reverted back to charging mode only.
I need a way of reinstalling the USB software or port software onto the phone itself via some type of APK if such a thing exists.
Maybe a developer here can develop one???
hey man
if you have disabled the "android platform usb modem" in peripherals manager, enable it first (phone must be plugged)
when you first install LG software on the computer, the phone connects okay for a few weeks and then loses connection, and I can never get it connected again.
Click to expand...
Click to collapse
this means it must be the result of an intervention by a third party thing, by yourself, or another program. If you have a kind of a software which manages ports or consumption (on phone as well as on Win), uninstall them, then uninstall all LG drivers, reboot, then reinstall them. if that doesn't solve your issue, you may have to reinstall windows. that's radical, but it should do it
Try connecting the usb while doing pressure between the LG logo on screen and the back of the phone, like squeezing something . I had this issue and it was an internal connector issue....
Check if you hear the "tada" sound in windows or any message about a new device.
Ilko said:
hey man
if you have disabled the "android platform usb modem" in peripherals manager, enable it first (phone must be plugged)
this means it must be the result of an intervention by a third party thing, by yourself, or another program. If you have a kind of a software which manages ports or consumption (on phone as well as on Win), uninstall them, then uninstall all LG drivers, reboot, then reinstall them. if that doesn't solve your issue, you may have to reinstall windows. that's radical, but it should do it
Click to expand...
Click to collapse
Hi, thanks for this, I'm not sure what you mean by "disabled the "android platform usb modem" in peripherals manager". I am using XP. I have had a look to see if there is any software remotely associated with port consumption etc and have uninstalled these and also reinstalled LG drivers. But situation is still the same.
Please note: I have an LG GT540 and this connects fine to the computer. I have also connected another LG optimus black and this also connects fine to the computer. On the basis of deduction, it must be a phone issue, somehow interacts with the computer fine and then fails after a little while. Also I haven't installed anything on the phone itself which might manage consumption or port. The computer has a usb host controller but not sure that means anything useful.
I do agree and have feeling that if I reinstall windows I bet the phone would start working again, possibly again for a few months. This means I reinstall windows on my pc and laptop and hope it all resolves without actually getting to the bottom of the problem.
What I need is another laptop to try this on. If I try another computer or laptop and it recognises the phone. What do I make of everything??? Any ideas.
ps also tried holding pinching usb lg cable as suggested but nothing different.
Thanks for all your efforts.
Further update to this, I installed LG drivers on a fresh dell laptop. Again nothing happened, the phone only charges. I am even more convinced that phone software is corrupt. How do I reinitialise phone USB software?? If there is such a thing.
Tokool said:
Further update to this, I installed LG drivers on a fresh dell laptop. Again nothing happened, the phone only charges. I am even more convinced that phone software is corrupt. How do I reinitialise phone USB software?? If there is such a thing.
Click to expand...
Click to collapse
flashing a new rom, i think it may be hardware issue

Categories

Resources