Database Develop

[Q] Need help after replacing my amoled screen

So my Screen broke and I bought a new one so I could replace it, the touch screen/digitizer didn't break though... at first the colors just started washing and fading untill the screen ended up completely dark, I could still use the touch screen and feel when I would unlock it, after a day the phone would not give me any feed back by vibrating or turning the orange light while charging, so I dismantled it using some tips from these videos:
http://www.youtube.com/watch?v=Hhj8Xs9vAyg
http://www.youtube.com/watch?v=hTRXSMQ-GJY&feature=related
After I put everything back together the phone is giving me feedback again and I can notice its charging because of the orange light, but the screen won't turn on. Does any one know if I might need to do something on the software side? like needing to re install anything? or do you think I just got a bad screen?
Update: I just took it apart again and reconnected the ribbons, its back together and the screen still won't turn on.

You have the AMOLED screen and not the LCD?
Did you compare the #'s on the old and new to see you got the right part?
Cables are the same, they look the same, part # and stickers are different...

What are the part numbers on your new and old screen? I just went through the same thing, but I'm fairly sure I got the wrong screen replacement. Will have to look more into it later tonight.
My screen wont turn on at all. I was so excited to get my N1 back in action as well.

LCD won't turn on - help

Hello, guys!
Recently I bought an HTC One with cracked digitizer, but functional. It had a lot of scratches etc, but this is not important right now. I wanted to do a complete make-over so I bought replacement parts from the internet, I bought the front housing with the LCD screen and the back cover. I dissasembled the phone from the old housing (the one with the broken digitizer), and I assembled it back on the new housing. After all of that, I powered on the phone and it worked like a charm (the LCD and the touch-screen worked perfectly), but then I saw that the glass was a little out, I mean it was upper than the speakers cover, so I decided to take out the whole screen and to change the adhesive, because it was too loose and the screen wasn't staying properly. I succesfully did that, i put the screen back and everything was good, but when I wanted to start the phone, the screen remains black. And this is the problem I have. I mention that I worked very carefully with the screen, so I don't think the problem is at the screen. I disconnected and reconnected all the cables and still doesn't work. When I press the power button it vibrates and then it's making that sound like the phone is booting, but no image on the LCD. If I keep the power button pressed, the back and home buttons are blinking and then the same story as before, vibrates and then the sound. I really don't know what could be the problem.
I really need some help with this and I'm open to all of your suggestions. If you want more informations feel free to ask.
Thanks in anticipation!

To me it looks like you damaged one the flat flex cable.
When you took the screen out did it come like suddenly and maybe some tension was applied to the flat flex?
If I were you I would take it apart and verify the connection in the socket, maybe the socket was damaged or something and it doesn't make a good connection
I hope it works out for you

Thank you for your answer!
When I took out the screen, I took it out very carefully and there wasn't any tension applied to the flex cable, so I don't think this is the problem. I think it's more likely a problem with the socket on the motherboard, like you said, and it's not making a good contact. But what can I do about that?

Sony Xperia Z3 E6553 still no display after LCD replacement

Good Day to All,
I have a problem with my Z3+ E6553, the problem is that there is no display on the phone. Couple of weeks ago the lcd just stopped working, the device does come on with the LED lights, vibration and the touch is reponsive with which you can here the touch sounds, haptic feedback and the Speech to text speaking. I thought the LCD screen went dead and so I bought a new LCD screen to replace it but after replacing the screen the problem still presist with no display(black screen). So currently I have no idea what is the cause or what to do next.
I opended the phone was just check some things out, and I had a look at the LCD flex cable and I found something strange that maybe one of the connector antenna prongs missing. But I'm not sure if thats just how it is or its maybe it got damaged. Have a look at the attached pictures below.
Can someone tell me if this issue is with the LCD motherboard flex cable, or another hardware issue maybe being the motherbaord?

Huawei p9 black screen

Sorry if this is the wrong place to post or it's been covered already. I have a p9 stock that I changed the screen on after dropping it. Everything was fine until the new screen started to fail, it was a cheap eBay screen and the glass started peeling away. I fitted a new one and when I switched it on the backlight comes on but no image, backlight then flashes 5 times and then stays on. The phone does the one vibration like it's starting up but after that does nothing. I tried the reset procedures but doesn't help. It wasn't on USB debug so I can't connect with my pc. I first thought the screen was faulty so had the vendor replace it but still have the same problem. Could it be the main board has been damaged or the flex cable?

Sounds like a batch of bad screens. I would stay away from eBay when it comes to Huawei P9 screens, too many issues with them. Had ones that were refurbished or glass separating from the screen frame.
Buying it without the frame and applying the adhesive yourself seems to work better for me. Anyway hopefully you didn't kill the backlight circuit on your phone.

benjamen50 said:
Sounds like a batch of bad screens. I would stay away from eBay when it comes to Huawei P9 screens, too many issues with them. Had ones that were refurbished or glass separating from the screen frame.
Buying it without the frame and applying the adhesive yourself seems to work better for me. Anyway hopefully you didn't kill the backlight circuit on your phone.
Click to expand...
Click to collapse
Backlight seems to be fine. You could be right, there's a faint blue tinge in one area.

Hey, did you ever solve this? I have the very same problem

Nexus 5 Display not working. Don't know what to replace.

So, I was trying to replace my Nexus 5s camera and I disassembled the main motherboard. Replaced my camera and everything but after I reassembled the phone, I found out that there's no display. The LEDs work fine, because I see them light up and I see that the screen is black but it's a bright black and the screen is on. So after tampering with it, I found that the little USB charger port wire board wire thst connects just above the battery (idk how to describe it, its the orange strip that locks the battery in place) had a direct correlation with the display. If I unplugged it, the screen would go dark and off. If I replugged it, it would be on again. After doing this a few times, I actually got my phone's display to show for a little while before it went away to black again. So will buying a new orange strip part work or would I have to go to the bottom where the little screen digitizer is? I'm sorry if the problem is unclear because I really don't know how to say it or explain any better. Please help.