Lineage-15.1 - Nokia 6 ROMs, Kernels, Recoveries, & Other Develop

You can test assembled by me Lineage-15.1
Works:
1. Sound
2. Wifi
3. Network
4. Nfc
Download: https://mega.nz/#!ux1wWarJ!zInewdW4hQk99uCCBm9NTsbXnSVkh9DKnb2qJYeteLM
Source - https://github.com/NokiaCustoms/android_device_nokia_PLE
Donate:
paypal.me/pirrat25

pirrat25 said:
You can test assembled by me Lineage-15.1
Works:
1. Sound
2. Wifi
3. Network
4. Nfc
Download: https://mega.nz/#!ux1wWarJ!zInewdW4hQk99uCCBm9NTsbXnSVkh9DKnb2qJYeteLM
Click to expand...
Click to collapse
Does it work on Nokia 6 2017 (TA-1033) ?

marto2013 said:
Does it work on Nokia 6 2017 (TA-1033) ?
Click to expand...
Click to collapse
I don't know. I don't have that model.
I have TA-1021

I will try if it works on the TA-1033 and I will confirm. Is Magisk supported ?
Are there any changes(tweaks) or just created a lineage?

I have bootloop on TA-1033..
I was with Nougat and wipe everything(system,data,cache), after that it doesn't boot.
Edit: When i update manual from nougat to oreo to save bootloader(not to be replaced), i remember that there was folder named "firmware-update".
Is this the problem?

Install only on a clean system.

pirrat25 said:
Install only on a clean system.
Click to expand...
Click to collapse
How ?
I wiped system partition.
Edit: Please add support for TA-1033

marto2013 said:
How ?
I wiped system partition.
Edit: Please add support for TA-1033
Click to expand...
Click to collapse
Что не работает?

pirrat25 said:
Что не работает?
Click to expand...
Click to collapse
I use TWRP to wipe system, data and cache partitions. After that i flash zip file and restart the phone. The logo of Nokia appears and after 2,3 seconds a black screen appears. That is bootloop. I don't know why..
Edit: I tried to use stock boot.img but that did not help me.

marto2013 said:
I use TWRP to wipe system, data and cache partitions. After that i flash zip file and restart the phone. The logo of Nokia appears and after 2,3 seconds a black screen appears. That is bootloop. I don't know why..
Edit: I tried to use stock boot.img but that did not help me.
Click to expand...
Click to collapse
Format:
Format Data, Format System, Format Cache

pirrat25 said:
Format:
Format Data, Format System, Format Cache
Click to expand...
Click to collapse
Already did. Then I flash this rom and bootloop..

How to install it please tell me the whole procedure i have nokia 6 (TA-1021)

Скинуть прошивку на sdcard, или на внешнюю папмять телефона, перезагрузиться в TWRP, dalvik cache, dalvik data, format system. После установить прошивку, и установить Magisk, для возможности войти в раздел для разработчиков. Всё можно делать перезагрузку. Их будет две. Так что ждём терпеливо загрузки системы. Ещё раз предупреждаю, прошивку ставить, только на разблокированный загрузчик.

pirrat25 said:
Скинуть прошивку на sdcard, или на внешнюю папмять телефона, перезагрузиться в TWRP, dalvik cache, dalvik data, format system. После установить прошивку, и установить Magisk, для возможности войти в раздел для разработчиков. Всё можно делать перезагрузку. Их будет две. Так что ждём терпеливо загрузки системы. Ещё раз предупреждаю, прошивку ставить, только на разблокированный загрузчик.
Click to expand...
Click to collapse
In English please

Drop the firmware on the SDCard, or on the external folder of the phone, reboot into TWRP, dalvik cache, dalvik data, formatting system. After installing the firmware and installing Magisk, to be able to enter the section for developers. Everything can be rebooted. There will be two of them. So we wait patiently for the system to boot. Once again, I warn you, install the firmware, only on the unlocked bootloader.

pirrat25 said:
Drop the firmware on the SDCard, or on the external folder of the phone, reboot into TWRP, dalvik cache, dalvik data, formatting system. After installing the firmware and installing Magisk, to be able to enter the section for developers. Everything can be rebooted. There will be two of them. So we wait patiently for the system to boot. Once again, I warn you, install the firmware, only on the unlocked bootloader.
Click to expand...
Click to collapse
Oky i already unlocked my bootloader sure i will try it

pirrat25 said:
You can test assembled by me Lineage-15.1
Works:
1. Sound
2. Wifi
3. Network
4. Nfc
Download: https://mega.nz/#!ux1wWarJ!zInewdW4hQk99uCCBm9NTsbXnSVkh9DKnb2qJYeteLM
Click to expand...
Click to collapse
Thank you for your commits and githib source I'm gonna compile a RR build of seven when I'm off work.I'll link it to you when I'm finished for testing
Do you have a donation link?

Everything thing works but NFC that's it..I hope to see lineage 16 or (im working on Resurrection Remix )
Note I found that if you have the Pie leaked beta installed it won't boot.you must go back to 8.1 firmware then install the build my phone did that anyways
EDIT:NFC works
No option to unlock with fingerprint.

RomLord14495 said:
Thank you for your commits and githib source I'm gonna compile a RR build of seven when I'm off work.I'll link it to you when I'm finished for testing
Do you have a donation link?
Click to expand...
Click to collapse
I'll wait.
donate: paypal.me/pirrat25

pirrat25 said:
I'll wait.
donate: paypal.me/pirrat25
Click to expand...
Click to collapse
I donated thank you for your work

Related

[Locked Bootloader]CWM recovery 6.0.2.8 for locked bootloaders v4[25-03]

Krabappel2548 and cpasjuste are proud to presents:
This is DooMLoRD's recovery, just added scripts to make it work on locked bootloader, all credits for recovery should go to him!
CWM recovery for locked bootloaders!
WORKING:
- I think All functions should be working, haven't tested all of them though.
NOT WORKING:
Phone hangs when cleaning cache?
Just leave it for a few minutes, it's needs some time to clean cache
Click to expand...
Click to collapse
- Let me know
HOW TO ENTER RECOVERY:
- Press volume up or down when green LED is on while booting
REQUIREMENTS:
- Locked bootloader
- Root
- Windows pc with adb drivers
INSTALLATION:
- Download the package and extract it to your pc.
- Run the script to install the recovery
- Enjoy it!
Error with creating file for faster backup?
This isn't a problem, it always gives an error if the file already exists, so it means you have the file already
Click to expand...
Click to collapse
Please don't mirror my download links or steal my work!
DOWNLOAD:
CWM 6.0.2.8 for locked bootloader v4
CREDITS:
- My dear friend DooMLorD for tips and some recovery files, "sbin/recovery" itself actually
- Cxpher for edit of run.sh script
- cpasjuste for his great and usefull help
INFO FOR ROM CHEFS:
1. Rename /system/bin/chargemon to /system/bin/chargemon.stock
2. Put the following files in /system/bin:
- recovery.tar
- charger
- chargemon
- ric
3. Add these lines to updater-script to set permissions:
Code:
set_perm(0, 2000, 0644, "/system/bin/recovery.tar");
set_perm(0, 2000, 0755, "/system/bin/ric");
set_perm(0, 2000, 0755, "/system/bin/charger");
set_perm(0, 2000, 0755, "/system/bin/chargemon");
CHANGELOG for CWM 6.0.2.8 v4:
- Updated run.sh script
CHANGELOG for CWM 6.0.2.8 v3:
- fixed slow backup problem
CHANGELOG for CWM 6.0.2.8 v2:
- Fixed adb
- Fixed /system problem
CHANGELOG for CWM 6.0.2.8:
- First release for locked bootloaders.
krabappel2548 said:
SOURCES:
Device configuration files: android_device_sony_yuga
Xperia Z TWRP sources: twrp_sony_yuga
CHANGELOG for 2.4.3.0 unreleased version:
- Fixed settings => screen: brightness changing is working now.
CHANGELOG for 2.4.3.0 stable:
- Fixed internal storage
- Fixed layout (may be small errors, but I needed to create a complete new mayout for 1080x1920)
- Fixed cache issue
- Fixed backup issue, won't backup internal storage data anymore
- Fully functional and working as it should
CHANGELOG for 2.4.3.0 beta 1.1:
- Partially fixed layout
CHANGELOG for 2.4.3.0 beta 1:
- First release for Xperia Z
- All basic functions are working
- Layout isn't ok yet.
- Internal storage isn't working yet
Click to expand...
Click to collapse
You ROCK DUDE!!!!!!!
trying now, just to clarify???
once installed i should be able to nandroid backup and flash mods as i would with an unlocked bootloader?
Процесс идет нормально, но в большинстве rekoveri не идет.
xl VipeR lx said:
You ROCK DUDE!!!!!!!
trying now, just to clarify???
once installed i should be able to nandroid backup and flash mods as i would with an unlocked bootloader?
Click to expand...
Click to collapse
If it works you can flash stock based roms, mods and take backups yes
Let's hope it works!
barbik said:
Процесс идет нормально, но в большинстве rekoveri не идет.
Click to expand...
Click to collapse
English please. I uploaded test 1.1, fixed the flashing script.
xl VipeR lx said:
You ROCK DUDE!!!!!!!
trying now, just to clarify???
once installed i should be able to nandroid backup and flash mods as i would with an unlocked bootloader?
Click to expand...
Click to collapse
I get the following error: Cannot stat sh, no such file or directory, is it meant to be sh? or su?
EDIT: Flashing the new test file
krabappel2548 said:
If it works you can flash stock based roms, mods and take backups yes
Let's hope it works!
English please. I uploaded test 1.1, fixed the flashing script.
Click to expand...
Click to collapse
Also cooked rom?
Thanks Also you are great developer
Thanks for your work.
xl VipeR lx said:
I get the following error: Cannot stat sh, no such file or directory, is it meant to be sh? or su?
EDIT: Flashing the new test file
Click to expand...
Click to collapse
Ok, let me know how that one went
tanoxxx said:
Also cooked rom?
Thanks Also you are great developer
Thanks for your work.
Click to expand...
Click to collapse
Yes, as long as the rom is stock based and the developer says it should work, it should work
Only thing is that recovery needs to be included in the rom or it will be lost, but I'll add instructions for rom cookers when I know the recovery works
tanoxxx said:
Also cooked rom?
Thanks Also you are great developer
Thanks for your work.
Click to expand...
Click to collapse
Still not working, now i get the following error
xl VipeR lx said:
Still not working, now i get the following error
Click to expand...
Click to collapse
ok, I'll check the script again, scripts isn't really my thing
krabappel2548 said:
damn that means I deleted the wrong line from my script
Click to expand...
Click to collapse
lol its ok, paitently waiting im reading the bat file to see if i can make out anything
are you supposed to have the -C in adb shell "su -c /data/local/tmp/twrp/step3.sh"
if i remove it i just get UNKNOWN ID in the error
krabappel2548 said:
Ok, let me know how that one went
Yes, as long as the rom is stock based and the developer says it should work, it should work
Only thing is that recovery needs to be included in the rom or it will be lost, but I'll add instructions for rom cookers when I know the recovery works
Click to expand...
Click to collapse
Thanks
Sorry finished my daily Thanks
Re: [Locked Bootloader]TWRP Touch recovery 2.4.3.0 for locked bootloaders - test1 [12
Do i have to connect my phone in flash Mode to install it? Thanks
"Swyped" From My X10Mini Running SevenBean Stable3
pongnamu said:
Do i have to connect my phone in flash Mode to install it? Thanks
"Swyped" From My X10Mini Running SevenBean Stable3
Click to expand...
Click to collapse
NO, same way as you rooted the locked bootloader, just connect while its on.
ITs currently not working, krabappel is working on it
Have no problem with installation I think, but i will not come into recovery with vol up and so on.
Witch buttons should I push?
xl VipeR lx said:
lol its ok, paitently waiting im reading the bat file to see if i can make out anything
are you supposed to have the -C in adb shell "su -c /data/local/tmp/twrp/step3.sh"
if i remove it i just get UNKNOWN ID in the error
Click to expand...
Click to collapse
I found the problem forgot to add one line and one file
Reuploading now
tanoxxx said:
Thanks
Sorry finished my daily Thanks
Click to expand...
Click to collapse
no prob
pongnamu said:
Do i have to connect my phone in flash Mode to install it? Thanks
"Swyped" From My X10Mini Running SevenBean Stable3
Click to expand...
Click to collapse
no, just usb, with usd-debuggin and unknown sources active
eagle1977 said:
Have no problem with installation I think, but i will not come into recovery with vol up and so on.
Witch buttons should I push?
Click to expand...
Click to collapse
installation couldn't be succesfull, one file was missing and script wasn't ok, new test file is up
Flashing works, no more errors in the script, it is possible be that you can't enter recovery yet. I've never made recovery for locked bootloaders
krabappel2548 said:
installation couldn't be succesfull, one file was missing and script wasn't ok, new test file is up
Flashing works, no more errors in the script, it is possible be that you can't enter recovery yet. I've never made recovery for locked bootloaders
Click to expand...
Click to collapse
I was actually thinking there was no sh file to push yet we chmod sh? lol it has flashed, testing now
My phone is now broke, everytime i try and boot up, it just gives me a battery icon, nothing else?!?!?
Im stuck in a boot loop
xl VipeR lx said:
I was actually thinking there was no sh file to push yet we chmod sh? lol it has flashed, testing now
My phone is now broke, everytime i try and boot up, it just gives me a battery icon, nothing else?!?!?
Im stuck in a boot loop
Click to expand...
Click to collapse
Confirmed
xl VipeR lx said:
I was actually thinking there was no sh file to push yet we chmod sh? lol it has flashed, testing now
My phone is now broke, everytime i try and boot up, it just gives me a battery icon, nothing else?!?!?
Click to expand...
Click to collapse
ok, I'll remove download link for now, need to fix that first. You'll need to flash an .ftf then, you can uncheck the wipe data and cache etc to restore to stock fw.
Sorry guys. I'll try to fix it asap.

Cannot install gapp in [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1

I writing in this thread, because I'm a new user, and haven't access to write in properly thread.
I have a problem with install gapp in
[ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
Click to expand...
Click to collapse
rom on S9001.
Rom is install good, everything work, but I haven't google play. I try install gaps a few time, but it still doesn't work.
Mayby I do something wrong...
What I did:
wipe data/factory reset
wipe cache partition
apply update from sdcard -> select rom zip
apply update from sdcard -> select gapp zip
reboot system now
sami_10 said:
I writing in this thread, because I'm a new user, and haven't access to write in properly thread.
I have a problem with install gapp in rom on S9001.
Rom is install good, everything work, but I haven't google play. I try install gaps a few time, but it still doesn't work.
Mayby I do something wrong...
What I did:
wipe data/factory reset
wipe cache partition
apply update from sdcard -> select rom zip
apply update from sdcard -> select gapp zip
reboot system now
Click to expand...
Click to collapse
Which recovery have you got?
First, install TWRP or CWM .
TWRP 2,6 is the best, imho.
Then repeat the operations, you'll success
Dari78 by Tapatalk 2
remember THANKS button!
dari78 said:
Which recovery have you got?
First, install TWRP or CWM .
TWRP 2,6 is the best, imho.
Then repeat the operations, you'll success
Dari78 by Tapatalk 2
remember THANKS button!
Click to expand...
Click to collapse
TWRP 2.6 put on SDcard and install from reboot?
sami_10 said:
TWRP 2.6 put on SDcard and install from reboot?
Click to expand...
Click to collapse
Yes, on sd card, then reboot in recovery and apply update from sd card, then reboot again
Dari78 by Tapatalk 2
remember THANKS button!
Thanks a lot, it's work

[MIUI9] Latest stable recovery & fastboot ROMs for Redmi 6A (cactus)

Hi all, as you know miui download page is down now. So, here are the latest ROMs for Redmi 6A
Latest stable recovery ROM
http://bigota.d.miui.com/V9.6.3.0.OCBCNFD/miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip
Latest stable fastboot ROM
http://bigota.d.miui.com/V9.6.3.0.O...CBCNFD_20180602.0000.00_8.1_cn_8908f50f02.tgz
Twrp out?
Looking for twrp myself.
Grahaman27 said:
Looking for twrp myself.
Click to expand...
Click to collapse
redmi 6a twrp by jemmini
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser
some bs there. it doesnt work. neither is it mentioned anywhere in the twrp official site.
atvator said:
redmi 6a twrp by jemmini
redmi 6a
twrp by jemmini from 4pda_ru mtp not working -use sd card.
1 format data & system, clear cashe and flash new firmware and magisk 15.3 , reboot to system and install magisk apk.
SEARCH IN GOOGLE 4pda(D0T)ru +ATVATOR +JEMMINI+TWRP WIHT LINK TO RGHO_ST IN MY POST
link (rgho(d0t)st /8mNZqm4BT) restore link & copy to browser
Click to expand...
Click to collapse
this twrp not active , tested on miui 9.6.3 9.6.5 and 9.6.6
empty.cad said:
this twrp not active , tested on miui 9.6.3 9.6.5 and 9.6.6
Click to expand...
Click to collapse
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
I also can not find it anywhere
---------- Post added at 05:11 PM ---------- Previous post was at 04:36 PM ----------
This is global but recovery rom
http://bigota.d.miui.com/V9.6.2.0.OCBMIFD/miui_CACTUSGlobal_V9.6.2.0.OCBMIFD_a9380c9697_8.1.zip
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
Grahaman27 said:
root and install twrp:
https://romprovider.com/2018/07/redmi-6a-root-twrp/
Click to expand...
Click to collapse
This doesn't work
o it doesn't. Twrp leads to data partition being encrypted. Whenever WIPE data partition to decrypt, all files are deleted. When reboot into fresh system, copy files again, and reboot into reflashed twrp, data partition is enrolled encrypted again. And no MTP so it's an endless loop.
---------- Post added at 06:21 PM ---------- Previous post was at 06:18 PM ----------
atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
o it doesn't. Twrp leads to data partition being encrypted. Whenever WIPE data partition to decrypt, all files are deleted. When reboot into fresh system, copy files again, and reboot into reflashed twrp, data partition is enrolled encrypted again. And no MTP so it's an endless loop.
Sd card? What sdcard
Sd card? What sdcard
Sd card =external Sd card
hi just want to ask if i had a redmi 6a china stable unlocked bootloader can i just use miflashtool to flash global stable rom?
http://bigota.d.miui.com/V9.6.11.0....FD_20180726.0000.00_8.1_global_f6cf0f4231.tgz
here is the global stable fastboot rom cant seem to find anyone tried yet
gsc_hd2 said:
This doesn't work
Click to expand...
Click to collapse
I guess mine is the only one it works for then.
redmi 6a global v 9.6.3 version
atvator said:
miui_CACTUS_V9.6.3.0.OCBCNFD_04b8a992c7_8.1.zip - tested OK
format data & system, clear cash, instal from SDcard firmware, magisk 15.3 & reboot to system & install magisk.apk
I need global firmware for fastboot -help me please.
Click to expand...
Click to collapse
same problem
geogetski666 said:
hi just want to ask if i had a redmi 6a china stable unlocked bootloader can i just use miflashtool to flash global stable rom?
http://bigota.d.miui.com/V9.6.11.0....FD_20180726.0000.00_8.1_global_f6cf0f4231.tgz
here is the global stable fastboot rom cant seem to find anyone tried yet
Click to expand...
Click to collapse
I also want to know ?
sushmoyhossain said:
I also want to know ?
Click to expand...
Click to collapse
I think you can, if you have unlock bootloader

Steps to do clean flash

1.Reboot to recovery
2.Wipe>advance wipe> select
a.dalvik cache
b.System
c.Vendor
d.Data
e.Cache
And swipe
3.Install>select ROM.zip
If rom does not have gapps then:-
Tap add more zip
Select gapps(Pico/Nano)
Install
6.Wipe dalvik cache and cache
7.Reboot system
ENJOY!
*NOTES*
1.Formatting data is not necessary everytime but if you face any problem like after rebooting you were asked for password then do a format data and reboot.
2.You can use latest TWRP but if facing problem then you can use the recommended TWRP released on 22/04/2020.
3.If you still facing any issue then you can ask freely by replying this post.
IF YOU LIKE MY WORK THEN HIT THANKS
ishu88 said:
1.Reboot to recovery
2.Wipe>advance wipe> select
a.dalvik cache
b.System
c.Vendor
d.Data
e.Cache
And swipe
3.Install>select ROM.zip
If rom does not have gapps then:-
Tap add more zip
Select gapps(Pico/Nano)
Install
6.Wipe dalvik cache and cache
7.Reboot system
ENJOY!
*NOTES*
1.Formatting data is not necessary everytime but if you face any problem like after rebooting you were asked for password then do a format data and reboot.
2.You can use latest TWRP but if facing problem then you can use the recommended TWRP released on 22/04/2020.
IF YOU LIKE MY WORK THEN HIT THANKS
Click to expand...
Click to collapse
Peru asfk
Ouff thanks sar.
Quite helpful. Booted successfully to PE. Now going back to Stock because I didn't like it?
beonbuster said:
Ouff thanks sar.
Quite helpful. Booted successfully to PE. Now going back to Stock because I didn't like it
Click to expand...
Click to collapse
Mention not just keep exploring things
raza231198 said:
Peru asfk
Click to expand...
Click to collapse
Thanks sir but you are pro meh noob
i am not able to find system or vendor options. but there's a metadata option. dalvik, cache and data is available. please help, my phone is not rooted

Development TWRP Unofficial Pstar

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Instructions
For now you can only boot TWRP you do this by executing the command:
fastboot boot
Bugs: slow bootup
Downloads
Latest v11-10-21
twrp-11-10-21.img
drive.google.com
twrp-pstar-06-10-21.img
drive.google.com
Old
twrp-pstar.img
drive.google.com
Donations
What's new:
Fixed Vibration
Fixed Bootctrl
Contributors
@Electimon, betaxab ko_hi
Version Information
SourceCode: https://gitlab.com/nihonnofanboi/twrp-motorola-pstar
Version Information
Status: Stable
Release Date: October-2-2021
Last Updated: October-11-2021
thnks
Say does this TWRP allow access to data partition (encrypted)?
Right now I'm running a GSI with vendor untouched so data is encrypted. It would be great if it could (after providing credentials), so backing up stuffs would become easier.
LSS4181 said:
Say does this TWRP allow access to data partition (encrypted)?
Right now I'm running a GSI with vendor untouched so data is encrypted. It would be great if it could (after providing credentials), so backing up stuffs would become easier.
Click to expand...
Click to collapse
Yes the decryption works at least on stock rom untested on GSI and unsure about A12 roms
ko_hi said:
Yes the decryption works at least on stock rom untested on GSI and unsure about A12 roms
Click to expand...
Click to collapse
Just tested. FBE can be correctly decrypted using User 0's security credentials, even though I'm using GSI. I think the encryption is enable/enforced by vendor fstab config and performed independent from ROM itself.
When I start TWRP I see an error saying unable to mount /product (block device required). For GSI usage, this is intended, as it's necessary to remove that ~2.7GB partition (erasing it and set its size to zero) in order to provide enough space in Super to resize and flash the GSI. I don't know if it's possible to suppress this error, though it's harmless.
By the way, there are two Super options when backing up, one simply says "Super", the other says "Super (system, system_ext, product, vendor)". Are the two options different?
Well, despite this TWRP is currently not flashable (boot-only), it looks good enough. I really hope it could be installed and also fastbootd-capable in the future.
LSS4181 said:
Just tested. FBE can be correctly decrypted using User 0's security credentials, even though I'm using GSI. I think the encryption is enable/enforced by vendor fstab config and performed independent from ROM itself.
When I start TWRP I see an error saying unable to mount /product (block device required). For GSI usage, this is intended, as it's necessary to remove that ~2.7GB partition (erasing it and set its size to zero) in order to provide enough space in Super to resize and flash the GSI. I don't know if it's possible to suppress this error, though it's harmless.
By the way, there are two Super options when backing up, one simply says "Super", the other says "Super (system, system_ext, product, vendor)". Are the two options different?
Well, despite this TWRP is currently not flashable (boot-only), it looks good enough. I really hope it could be installed and also fastbootd-capable in the future.
Click to expand...
Click to collapse
I'll look into it later! AFAIK Fastbootd is working (I think I've flashed this twrp to confirm it) regarding the backup options I can't tell I must check! But thanks for pointing out! More bugs coming in and needs to be resolved!
Updated TWRP will come later today or tomorrow
Fixed Boot time to twrp
instead of 50s+ it's now dropped down to 14-16s
ko_hi said:
I'll look into it later! AFAIK Fastbootd is working (I think I've flashed this twrp to confirm it) regarding the backup options I can't tell I must check! But thanks for pointing out! More bugs coming in and needs to be resolved!
Click to expand...
Click to collapse
ko_hi said:
Updated TWRP will come later today or tomorrow
Fixed Boot time to twrp
instead of 50s+ it's now dropped down to 14-16s
Click to expand...
Click to collapse
Good news. You said you "flashed" this TWRP to confirm fastbootd functionality so... does flashing work? As you currently only recommend booting it instead of flashing, I'm not sure.
If fastbootd also works, I really hope if I could actually flash TWRP at some point, as it's more convenient to make and manage backups with it.
LSS4181 said:
Good news. You said you "flashed" this TWRP to confirm fastbootd functionality so... does flashing work? As you currently only recommend booting it instead of flashing, I'm not sure.
If fastbootd also works, I really hope if I could actually flash TWRP at some point, as it's more convenient to make and manage backups with it.
Click to expand...
Click to collapse
I'm 100 sure I've tested it but i can confirm it soon again
Edit latest test us broken but i see the cause
thanks ,but i have a question . is this twrp forever in Edge 20 pro (or edge s pro (china)) ? i tried ，now ,my phone is bricked
sexyDog said:
thanks ,but i have a question . is this twrp forever in Edge 20 pro (or edge s pro (china)) ? i tried ，now ,my phone is bricked
Click to expand...
Click to collapse
Only tested on edge 20 pro
ko_hi said:
Only tested on edge 20 pro
Click to expand...
Click to collapse
Tested on the Moto Edge S Pro as well.
sexyDog said:
thanks ,but i have a question . is this twrp forever in Edge 20 pro (or edge s pro (china)) ? i tried ，now ,my phone is bricked
Click to expand...
Click to collapse
I don't think this TWRP is safe to flash yet, but you can boot. I have booted this on my own Edge S Pro and it worked fine... so not sure what caused it to brick.
LSS4181 said:
I don't think this TWRP is safe to flash yet, but you can boot. I have booted this on my own Edge S Pro and it worked fine... so not sure what caused it to brick.
Click to expand...
Click to collapse
Only temp boot is working, I've managed to boot TWRP as boot but it crashed system quite good!
Hello, developer！I flash your twrp file，it’s good on my device（moto edge s pro china version），very thank you ,but it just temp working,it's a little disappointing. I wrote a script file to solve this problem，reboot to recovery，need root permission , and i not find recovery partition,maybe in bootloader.img?
my script
Bash:
if [ -f "/sdcard/boot_a.img" ];then rm -rf /sdcard/boot_a.img;fi
dd if=/dev/block/by-name/boot_a of=/sdcard/boot_a.img
dd if=/sdcard/twrp-11-10-21.img of=/dev/block/by-name/boot_a
reboot
MrZZZ123 said:
Hello, developer！I flash your twrp file，it’s good on my device（moto edge s pro china version），very thank you ,but it just temp working,it's a little disappointing. I wrote a script file to solve this problem，reboot to recovery，need root permission , and i not find recovery partition,maybe in bootloader.img?
my script
Bash:
if [ -f "/sdcard/boot_a.img" ];then rm -rf /sdcard/boot_a.img;fi
dd if=/dev/block/by-name/boot_a of=/sdcard/boot_a.img
dd if=/sdcard/twrp-11-10-21.img of=/dev/block/by-name/boot_a
reboot
Click to expand...
Click to collapse
From what I recall our device doesn't have a standalone recovery partition, so it's inside boot.img.
Now that Motorola has released the kernel source code it might be possible to build a kernel with TWRP included.
LSS4181 said:
From what I recall our device doesn't have a standalone recovery partition, so it's inside boot.img.
Now that Motorola has released the kernel source code it might be possible to build a kernel with TWRP included.
Click to expand...
Click to collapse
This news is a hundred years old, but the development of TWRP has stopped and it seems forever...
ko_hi said:
Team Win Recovery Project (TWRP) — это настраиваемый образ восстановления программного обеспечения с открытым исходным кодом для устройств на базе Android. Он предоставляет интерфейс с сенсорным экраном, который позволяет пользователям устанавливать сторонние прошивки и создавать резервные копии текущей системы, функции, которые часто не поддерживаются стандартными образами восстановления. Поэтому он часто устанавливается при рутировании устройств Android, хотя его установка не зависит от рутируемого устройства.
инструкции
На данный момент вы можете загрузить только TWRP, выполнив команду:
быстрая загрузка
Баги: медленная загрузка
Загрузки
Последняя версия 11-10-21
twrp-11-10-21.img
drive.google.com
twrp-pstar-06-10-21.img
drive.google.com
Старый
twrp-pstar.img
drive.google.com
Пожертвования
Какие новости:
Фиксированная вибрация
Фиксированный Bootctrl
Авторы
@Electimon, бетаксаб ko_hi
Информация о версии
Исходный код: https://gitlab.com/nihonnofanboi/twrp-motorola-pstar
Информация о версии
Статус: Стабильный
Дата выхода: 2 октября 2021 г.
Последнее обновление: 11 октября 2021 г.
Click to expand...
Click to collapse
Good time, tell me if there will be further development?
otmitia said:
Доброго времени, подскажите, будет ли дальнейшее развитие?
Click to expand...
Click to collapse
XDA is an english speaking site. You can type a message in your language, but you must provide a translation as well.
C:\Users\User\Desktop\Bon\ADB\platform-tools>fastboot flash recovery C:\Users\User\Desktop\Bon\ADB\platform-tools\twrp-11-10-21.img.img
Sending 'recovery' (90216 KB) OKAY [ 2.084s]
Writing 'recovery' (bootloader) Invalid partition name recovery
FAILED (remote: '')
fastboot: error: Command failed
C:\Users\User\Desktop\Bon\ADB\platform-tools>
HEY FELLAS, HOW TO FIX THIS KIND OF ISSUE?

Categories

Resources