Related
[Q&A] [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat
Q&A for [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
guys please help me out.
i've unlock the bootloader of my H30-U10 ,after that when i install the new custom rom the phone doesnt launch anymore....no pulse of vibration or screen light.....when i connect it to pc actually windows doesnt detect it at all methods not fastboot mode or flashmode or....... .... my phone doesnt start at all
plz plz plz plz help
Plz help me my honor 3c doesnt launch at all with no pulse of vibration
guys please help me out.plz plz plz :crying:
i've unlock the bootloader of my H30-U10 ,after that when i install the new custom rom [6pack by flufy tendo] with TWRP recovery.... the phone doesnt launch anymore....no pulse of vibration or screen light.....when i connect it to pc actually windows doesnt detect it at all methods not fastboot mode or flashmode or....... .... my phone doesnt start at all
plz plz plz plz help :crying: :crying: :crying:
Huawei Honor 3C
My phone not recharging
can I get the circuit diagram for Huawei Honor 3C
http://forum.xda-developers.com/showthread.php?t=2910441
hi i new twrap cant load sdcard and i dont flah modem patch i move this faile to internal memory and instal modem patch but not work gaps please help me to finde a recovery
tanks tanks
New build number 4.10.16
@codelover, LIve recovery not working with New build number 4.10.16. Pls help
Cannot boot to recovery after flash k.k based
Hi there,
I had flashed K.K based with emui2.3 from previousB115 international set with unlock bootloader.
after flashed the new K.K rom and flashed CWM carliv, then try boot to recovery to wipe data, but why nothing's happen? it stuck on 1st honor logo and can't boot to recovery
something's going wrong with my steps?
please help, i want to wipe data then root the K.K based
both confirmed here wih ver. 4.10.16,LiveTWRP seems not to be working anymore
here is the log file
thanks
Restore ROM for Honor 3C (H30-U10) to Stock JB Firmware (V100R001C900B110)
Respectable Sir,
My Dad's Honor 3c LCD had some hardware issue to troubleshoot i tried to upgrade to KITKat but the problems with the screen was persistent, i sent it to the service center but they said the warranty is void unless i restore it to the stock version (Picture for the version i need to restore is attached).
1. I restored back to Honor 3C (H30-U10) to B108 Stock JB Firmware (V100R001C900B108) but they said i need to restore back to the version it came in ...
2. " Honor 3C (H30-U10) to JB Firmware (V100R001C900B110) THIS IS THE FIRMWARE VERSION I NEED BUT I CANT FIND IT ANYWHERE "
Kindly treat my email as an SOS .
yasan1367 said:
hi i new twrap cant load sdcard and i dont flah modem patch i move this faile to internal memory and instal modem patch but not work gaps please help me to finde a recovery
tanks tanks
Click to expand...
Click to collapse
ModemFix can't be use to get IMEIs back in B108, it was made for EMUI 2.3 dev.
horlaworey said:
@codelover, LIve recovery not working with New build number 4.10.16. Pls help
Click to expand...
Click to collapse
Yes, indeed, LiveTWRP will no longer work on newer builds, i am afraid you will need to flash the recovery to device if you want to use it.
After all, the 'Live' version is a bonus, and without source i have no idea what they did that caused it failed to boot.
Rayquaza said:
I had flashed K.K based with emui2.3 from previousB115 international set with unlock bootloader.
after flashed the new K.K rom and flashed CWM carliv, then try boot to recovery to wipe data, but why nothing's happen? it stuck on 1st honor logo and can't boot to recovery
something's going wrong with my steps?
please help, i want to wipe data then root the K.K based
Click to expand...
Click to collapse
Hi, please refer to the main guide for updated button sequence to be used to boot recovery. (Will be updated shortly)
elysianz said:
both confirmed here wih ver. 4.10.16,LiveTWRP seems not to be working anymore
here is the log file
Click to expand...
Click to collapse
Live TWRP part confirmed, it can no longer be used with newer EMUI version.
For sdcard problem, can you confirm your device is H3C H30-U10? Not H3W or other variant? Intl. or China set?
I would suggest you to try the following:
1) Reset TWRP settings
2) Try other SD card, different brand if possible.
3) Smaller storage size, eg: If you are using 16GB now, try one with lower size like 8GB, 4GB.
4) Format the SD card with android, remove any extra feature such as sdcard encryption.
adeelahmad967 said:
1. I restored back to Honor 3C (H30-U10) to B108 Stock JB Firmware (V100R001C900B108) but they said i need to restore back to the version it came in ...
2. " Honor 3C (H30-U10) to JB Firmware (V100R001C900B110) THIS IS THE FIRMWARE VERSION I NEED BUT I CANT FIND IT ANYWHERE ".
Click to expand...
Click to collapse
I believed you have it connected to internet and checked for update and there is no OTA available for your device, correct?
Unfortunely HW has removed the download link for B110, i do not have any backup for B110 either, i didn't download it earlier.
For now i think what you can do it ask your friend or some else with B110 to do a TWRP backup and use the backup to restore.
You need to restore /system & /cust partitions only, once you have done that do a factory data reset from a booted system.
I wish i could help more but i have the slowest internet on the planet so nothing i can do here.
EDIT:
xperia_rebel said:
@codelover bro , I think I have.... Confirm whether the B110 international version would be fine
Click to expand...
Click to collapse
TWRP B110 backup from your country? Yea, that would be fine too, but if you have the B110 UPDATE.APP that would be better.
I am not sure if B108 locked BL could survive TWRP restore without first soft-bricking it, i didn't try that, or i tried but forgot ...
codelover said:
ModemFix can't be use to get IMEIs back in B108, it was made for EMUI 2.3 dev.
Yes, indeed, LiveTWRP will no longer work on newer builds, i am afraid you will need to flash the recovery to device if you want to use it.
After all, the 'Live' version is a bonus, and without source i have no idea what they did that caused it failed to boot.
Hi, please refer to the main guide for updated button sequence to be used to boot recovery. (Will be updated shortly)
Live TWRP part confirmed, it can no longer be used with newer EMUI version.
For sdcard problem, can you confirm your device is H3C H30-U10? Not H3W or other variant? Intl. or China set?
I would suggest you to try the following:
1) Reset TWRP settings
2) Try other SD card, different brand if possible.
3) Format the SD card with android, remove any extra feature such as encryption.
I believed you have it connected to internet and checked for update and there is no OTA available for your device, correct?
Unfortunely HW has removed the download link for B110, i do not have any backup for B110 either, i didn't download it earlier.
For now i think what you can do it ask your friend or some else with B110 to do a TWRP backup and use the backup to restore.
You need to restore /system & /cust partitions only, once you have done that do a factory data reset from a booted system.
I wish i could help more but i have the slowest internet on the planet so nothing i can do here.
Click to expand...
Click to collapse
@codelover bro , I think I have.... Confirm whether the B110 international version would be fine
Sent from my H30-U10
yes bro b11o is what i need
yes Bro B110 international will be a huge help .
asking for help
- Phone model: h30-u10
- Phone Version: international boot unlocked
- Initial Build Number: v100r001c900b110
- Last Build Number: v100r001c900b110
- Current Status: bootloop logo
- Problem/Question:unable to use xposed installer
my mobile is rooted successfully i tried all the versions of xposed installer all failed to install framework on my mobile it seems as if there is not enough permission on file system even root explorer unable to delete any file system
Zip instalation failed
Hi there,
I have follow the steps to flash emui 3.0 beta using TWRP, but the installation failed.
Any suggestion?
Thanks a lot
hi ,
just because of your guide, i was able to get back my honor 3c from soft brick to original international B115 image. thanks a lot for supporting.
@codelover
I had checked all steps you've been explained, but it goes failed when i flashed the rom through TWRP
anyway, I'll try your suggestion later, because i had flashed Emui 2.3 currently.
By the way, i had root emui 2.3 and verify by root checker, but i had problem with busybox. I cannot install it.
my system memory remains 34mb, does the memory space too small to instal busybox?
Help please
Hello! I downloaded the firmware EMUI2.3_H30-U10_4.9.1 and did everything you wrote, but after extracting the firmware by HuaweiUpdateExtractor_0.9.8.0 I did found in the folder the file '_PrepareFiles.exe' (item 13 of your post)! What is wrong? Thank you!!!
suggestion
dear sir,
it is great to have your guide with me, i just wanted to make a suggestion, at the point where you have summarize the steps for installing kit kat on international hand sets, please write an instruction that all international users must have unlocked their phones, before rom update, so after upgrading they could run live TWRP easily.
Thanks and regards once again.
Hello! I downloaded the firmware EMUI2.3_H30-U10_4.9.1 to flash the phone by Flash Tool. According the guide "Restoring Official Stock ROM using SPFT" (http://forum.xda-developers.com/show...809&postcount=) after extracting the firmware by HuaweiUpdateExtractor_0.9.8.0 the file "_PrepareFiles.exe" must be appear in the folder with extracted firmware. But in my case when I extracted the file "update.app" I did'nt find the file "_PrepareFiles.exe" in the folder (((( What is wrong? The NET.framework v.4.5.1. is instastalled. Thank you!
Hi everyone !
I rooted my Honor 5C a while ago and everything went smoothly. After installing Xposed, some modules and some nice root apps, I decided to take a step forward.
Lately, I heard of MicroG to replace Google Apps and Services. Since I'm actually and for quite some time trying to degooglise myself more and more, it catched my interest. Thus, according to several tutorials, I used Root App Deleter to uninstall GApps, in order to replace them with the MicroG framework. Then I reboot and... well my device was unable to pass the Honor screen. So I went to TWRP recovery menu and tried a factory reset, which changed nothing, so I went deeper in the wipe settings and wiped... pretty much everything yeah. This was quite a stupid thing to do, now I don't even have an OS installed on my phone...
And of course, I've been stupid enough to never did a nandroid backup. Feel free to yell or mock me, I know I really should have...
Anyway, at this point, it seems that the only available option to me would be to flash a stock rom to my device, but I can't find one for the EU version NEM-L51. Actually, I can't find any stock rom for Honor 5C on Huawei site, nor on the web. I did quite some research today and I swear I couldn't find anything, anywhere. And here I am.
Please guys, can someone help me ? I know I'm at fault for not taking my precautions before doing some risky stuff, and I guess it was going to happen to me one of these days, but I hope there is something I can do.
Thanks in advance for reading and eventually trying to help me if you can.
See ya !
google huawei firmware finder to get stock rom
jkccl9 said:
google huawei firmware finder to get stock rom
Click to expand...
Click to collapse
Thanks for answering. I installed that software on Windows, but by searching for "NEM-L51", I got a list of several models : NEM-L51C10B141, NEM-L51C432B130, NEM-L51C432B120, NEM-L51C10B121, NEM-L51C432B104 and NEM-L51C432B103. I have no idea which one I should try to download. Can you help me figuring that out ?
Again, thank you for your help.
Zarou said:
Thanks for answering. I installed that software on Windows, but by searching for "NEM-L51", I got a list of several models : NEM-L51C10B141, NEM-L51C432B130, NEM-L51C432B120, NEM-L51C10B121, NEM-L51C432B104 and NEM-L51C432B103. I have no idea which one I should try to download. Can you help me figuring that out ?
Again, thank you for your help.
Click to expand...
Click to collapse
do you remember which version was installed on the phone? that is what the different Bxxx stands for
jkccl9 said:
do you remember which version was installed on the phone? that is what the different Bxxx stands for
Click to expand...
Click to collapse
As I thought, but unfortunately, no, I don't. What should I do then ? Try them all ?
Zarou said:
As I thought, but unfortunately, no, I don't. What should I do then ? Try them all ?
Click to expand...
Click to collapse
i guess thats the only thing you can do unless someone else uploads a twrp backup that you can flash.
to start download honor multitool and huawei update extractor. use the unbrick option use lowest Bxxx number first until the phone boots. may have to wait a few minutes
or idk if you can use the 3 button flash method, considering you dont know which version you have installed previously.
jkccl9 said:
i guess thats the only thing you can do unless someone else uploads a twrp backup that you can flash.
to start download honor multitool and huawei update extractor. use the unbrick option use lowest Bxxx number first until the phone boots. may have to wait a few minutes
or idk if you can use the 3 button flash method, considering you dont know which version you have installed previously.
Click to expand...
Click to collapse
I don't know this tool, but after a quick research, it looks like Honor Multitool has been made for Honor 6 and 7 devices. Or am I wrong ? As for Huawei Update Extractor, isn't a tradition file extractor good enough for this ? I thought I could flash the ROM from the TWRP menu, but it's not going to be that easy, right ?
Anyway, links for B103 and B104 are dead. But why some zip are NEM-L51C432Bxxx and others NEM-L51C10Bxxx ? Are they from different devices ? Guess I can try them all regardless, things won't get any worse because of that, right ?
Oh, and some zip files are OTA and others are FULL, but assuming I don't have an OS installed, I guess I have to go for the FULL types, correct ?
Sorry for asking so many questions, I'm pretty unaware of what to do in these circumstances and I really hope I'll be able to get my phone working again...
Zarou said:
I don't know this tool, but after a quick research, it looks like Honor Multitool has been made for Honor 6 and 7 devices. Or am I wrong ? As for Huawei Update Extractor, isn't a tradition file extractor good enough for this ? I thought I could flash the ROM from the TWRP menu, but it's not going to be that easy, right ?
Anyway, links for B103 and B104 are dead. But why some zip are NEM-L51C432Bxxx and others NEM-L51C10Bxxx ? Are they from different devices ? Guess I can try them all regardless, things won't get any worse because of that, right ?
Oh, and some zip files are OTA and others are FULL, but assuming I don't have an OS installed, I guess I have to go for the FULL types, correct ?
Sorry for asking so many questions, I'm pretty unaware of what to do in these circumstances and I really hope I'll be able to get my phone working again...
Click to expand...
Click to collapse
the multitool should work for all as honor phones are similar, need huawei update extractor. google which version of the phone you have to see which Cxx you need. yes you need full
p.s you can also use this method https://forum.xda-developers.com/honor-7/help/to-destroyed-ur-h7-noob-friendly-t3554793
jkccl9 said:
the multitool should work for all as honor phones are similar, need huawei update extractor. google which version of the phone you have to see which Cxx you need. yes you need full
p.s you can also use this method https://forum.xda-developers.com/honor-7/help/to-destroyed-ur-h7-noob-friendly-t3554793
Click to expand...
Click to collapse
In the end, I ended trying the second method from there : http://www.gizmoadvices.com/install-stock-firmware-honor-5c-b102/ with a file I got from Huawei Firmware Finder. Basically, in case this can help someone, I extracted the archive content in the internal storage (my phone was plugged to my PC while in TWRP menu), then created a dload folder within which I cut/paste the update.app previously extracted. Then I powered off my device and rebooted it while pressing the volume up, down and power button as you also suggested. After the process completed and another reboot, the whole thing was apparently good to go. For now anyway, I receive phone calls and texts, and network is functioning as well.
Still, I noticed something strange. I downloaded the NEM-L51C10B141 build version, but in my phone info, I have the NEM-L51C432B141, which wasn't even in the list of the zip files from Huawei Firmware Finder. How comes ? Plus, I can't know for sure, but I think I hadn't this version since it is apparently the most recent one available. Is it possible that I have now a more recent build version than my phone had considering it didn't seem to want to update beforehand ? Also, what could be the fallout after that ?
Again, thank you. You've been a huge help, I wouldn't have made it without you. I'll be more careful next time.
Zarou said:
In the end, I ended trying the second method from there : http://www.gizmoadvices.com/install-stock-firmware-honor-5c-b102/ with a file I got from Huawei Firmware Finder. Basically, in case this can help someone, I extracted the archive content in the internal storage (my phone was plugged to my PC while in TWRP menu), then created a dload folder within which I cut/paste the update.app previously extracted. Then I powered off my device and rebooted it while pressing the volume up, down and power button as you also suggested. After the process completed and another reboot, the whole thing was apparently good to go. For now anyway, I receive phone calls and texts, and network is functioning as well.
Still, I noticed something strange. I downloaded the NEM-L51C10B141 build version, but in my phone info, I have the NEM-L51C432B141, which wasn't even in the list of the zip files from Huawei Firmware Finder. How comes ? Plus, I can't know for sure, but I think I hadn't this version since it is apparently the most recent one available. Is it possible that I have now a more recent build version than my phone had considering it didn't seem to want to update beforehand ? Also, what could be the fallout after that ?
Again, thank you. You've been a huge help, I wouldn't have made it without you. I'll be more careful next time.
Click to expand...
Click to collapse
not sure what happened to your build number... np thats the method i use to unbrick my phone done it like 20 times XD
jkccl9 said:
not sure what happened to your build number... np thats the method i use to unbrick my phone done it like 20 times XD
Click to expand...
Click to collapse
Well, I looked at the options and it's clearly not the version I had before, there are some differences here and there. Basically, the build number just refer to the latest security patches, is that it ? So if I have a more recent one, I guess it's just lucky me. Dunno why Huawei didn't propose me to update to it though... And I'm still on Android 6.0.
Sad thing is, this method apparently locked again my bootloader. I guess TWRP is gone too then... Long road ahead.
Thanks again for your help.
Zarou said:
Well, I looked at the options and it's clearly not the version I had before, there are some differences here and there. Basically, the build number just refer to the latest security patches, is that it ? So if I have a more recent one, I guess it's just lucky me. Dunno why Huawei didn't propose me to update to it though... And I'm still on Android 6.0.
Sad thing is, this method apparently locked again my bootloader. I guess TWRP is gone too then... Long road ahead.
Thanks again for your help.
Click to expand...
Click to collapse
no problem, hit the thanks button please!!!
jkccl9 said:
no problem, hit the thanks button please!!!
Click to expand...
Click to collapse
I did.
Can you confirm or infirm what I said about the build number ? Just to be sure.
Zarou said:
I did.
Can you confirm or infirm what I said about the build number ? Just to be sure.
Click to expand...
Click to collapse
i dont know what the Cxx is? the start will be the model and the end Bxx is version of firmware thats all i know :/ i just bought a new phone as my huawei is getting pretty old so havent really been keeping up with any of new stuff huawei do
jkccl9 said:
i dont know what the Cxx is? the start will be the model and the end Bxx is version of firmware thats all i know :/ i just bought a new phone as my huawei is getting pretty old so havent really been keeping up with any of new stuff huawei do
Click to expand...
Click to collapse
Okay, thanks anyway.
Hi guys, I am only a very junior user who randomly flash his phone but most of the time I want my phone to be stable for work. I have had the situation since the recent OTA available, suffered a lot, would like to seek any help or advice.
I have a L09C635B361, Japan version. I updated to Android 7 via OTA, then unlocked / rooted under the instructions in this forum, forgot which exact thread though. Never thought of flashing any customized rom so I haven't realized the update problem until the recent OTA update (from B361 to B382) released. I got the push, downloaded B382 OTA package, restart to TWRP, then the flash was failed in TWRP screen. Restart again, the system notified there was a recent update failure. Then I installed Firmware Finder, downloaded the 3 update zip files, restart back to TWRP, still failed installing. Please refer to the failure screenshot for detailed reson. I have no idea what it said and how I should do differently.
No other way to go, I backed up my system, then wiped my phone, reset to factory mode, but brand new system was very strange: only voice input, no keyboard, missing several key functions such as camera. So I have to restore to my previous system, everything worked well except I can't open "clock".
Right now I am looking at system notification of B382 all the time, but I can't figure out how to get it updated, I don't mind if there's a way enables me go back to stock rom, but it's really hard to find the stock firmware for C635......
Thanks, appreciate your help in advance.
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
xMrTROLLIPOPx said:
Hey man, try follow this guide to debrand your phone (get onto C432). It will probably unroot you and get you back to stock firmware as well.
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Might want to check around first though, I dont want you bricking your phone on my account.
Good luck
Click to expand...
Click to collapse
Thanks bro. I will try the entire process when I have a backup phone.
One more thing is when I first tried to wipe phone, failed for several times. Plus the TWRP flashing error, I have suspect that there's something wrong with my partition information or format error. Can anyone help me to eliminate the possibility by the screenshot please?
On the other hand, I found 3 zip files on Firmware for same version update. Which one should I flash? If I need to flash all of the 3, is there a sequence?
The screenshot for the 3 zip files.
oushouseki said:
The screenshot for the 3 zip files.
Click to expand...
Click to collapse
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
lostunsunghero said:
You flash those in the order they appear. Except the last one, don't flash that (I think). From what I know it's always been update.zip and then update_hw.zip.
I see you're going to flash hw_jp which is the Japanese cust, so ignore the advice above about debranding to c432 as that's essentially the same thing as what you are about to do with those files. (C432 is the European version, which is called update_hw_eu.zip)
Also the voice input only bug is well known. You need to rollback to marshmallow (I forget which firmware but there's a thread on it here somewhere) and then OTA back to nougat and it should fix it.
Click to expand...
Click to collapse
Well, it ended up with paying 20USD to some "pro"s on taobao.com to unbrick my P9...sigh...am I too old to do this :crying:
I rooted my p10 lite device and I tried to decrypt data using this method https://forum.xda-developers.com/showpost.php?p=72556843&postcount=6
I couldnt back the data up. So I wiped data and flashed the link's latest zip.
Since then, I couldn't boot. So, I flashed stefanwe92's twrp backup.
Then it seemed to start the OS correctly , however it shows only a navbar and I couldn't operate anymore.
Is there a solution? Or can only fix this using DC-Phoenix or Funkyhuawei?
Sorry for my English. Thank you.
tuvin5f0 said:
I rooted my p10 lite device and I tried to decrypt data using this method https://forum.xda-developers.com/showpost.php?p=72556843&postcount=6
I couldnt back the data up. So I wiped data and flashed the link's latest zip.
Since then, I couldn't boot. So, I flashed stefanwe92's twrp backup.
Then it seemed to start the OS correctly , however it shows only a navbar and I couldn't operate anymore.
Is there a solution? Or can only fix this using DC-Phoenix or Funkyhuawei?
Sorry for my English. Thank you.
Click to expand...
Click to collapse
Yes you can use the paid services but before you can try to flash hw_data and public in twrp for the firmware you are on ,they should fix ur phone.
Use firmware finder to download those files.
Hi people, i bricked my huawei p10 lite was-lx2. Unlock and twrp. anyone have the firmware? I google it already but does not found any. WAS-LX2C636B130 4gbram 32gbstorage dual-sim malaysia. Or if there is the way i can debrand it with "dual-sim and support my telco" firmware. tell me if its possible. Thanks!
Just randomly I noticed my 2nd sim slot isn't showing any longer. I use 2 sim card in my phone and just randomly I can longer enable it, as if the phone was never a dual sim? the Option in the settings have changed too. I have installed nor updated the phone. Restart or reboot don't help. Thanks
Further more the phone no longer shows any association with SIM 2, no imei, no phone 2 data, etc.As if the phone was a single sim only. Removing, reinstalling, doesn't help the case. Advice welcome please
Evo400 said:
Further more the phone no longer shows any association with SIM 2, no imei, no phone 2 data, etc.As if the phone was a single sim only. Removing, reinstalling, doesn't help the case. Advice welcome please
Click to expand...
Click to collapse
Start by updating the rom (13.0.37).
NOSS8 said:
Start by updating the rom (13.0.37).
Click to expand...
Click to collapse
would this be the reason? I also noticed that my portable hotspot has appeared in the menu while I was in connection and sharing menu before.
I'll try thr update, just have to figure how not to loose data, im also rooted
Evo400 said:
would this be the reason? I also noticed that my portable hotspot has appeared in the menu while I was in connection and sharing menu before.
I'll try thr update, just have to figure how not to loose data, im also rooted
Click to expand...
Click to collapse
Maybe not but the update can solve the problem especially with root.
Update with TWRP(zip rom not fastboot zip) and unroot before.
TWRP https://androidfilehost.com/?w=files&flid=326460
Is there a possibility to update via fastboot? I dont want to TWRP unless I have to? I tought TWRP wasnt possible on A12? Sorry to bother you but have you any links on TWRP how to?
Evo400 said:
Is there a possibility to update via fastboot? I dont want to TWRP unless I have to? I tought TWRP wasnt possible on A12? Sorry to bother you but have you any links on TWRP how to?
Click to expand...
Click to collapse
Now that there is a TWRP the roms are to be flashed with. (link on previous post).
https://forum.xda-developers.com/t/install-twrp-for-xiaomi-11t-pro.4398007/post-86472811
The TWRP link you posted for 12 Pro zeus, is this the latest one or I just found another one in the link below from xiaomi eu forums?
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v5.6_A12
Evo400 said:
The TWRP link you posted for 12 Pro zeus, is this the latest one or I just found another one in the link below from xiaomi eu forums?
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v5.6_A12
Click to expand...
Click to collapse
As you can see it was updated today.
Last question, it seems like magisk no longer works as some people have described and root is hard to achieve via TWRP.
Is your phone rooted on the lastest version of xiaomi eu for 12 Pro? thanks
Evo400 said:
Last question, it seems like magisk no longer works as some people have described and root is hard to achieve via TWRP.
Is your phone rooted on the lastest version of xiaomi eu for 12 Pro? thanks
Click to expand...
Click to collapse
Nope,but why rooting?
Xiaomi EU rom have the play store certified without root.
Im not worried about playstore, latest safetynet works fine with all banking and playstore.
Root for me cause of privacy, adaway is a big one, having zero ads on android is a game changer, plus being in full control via xposed is what attracts me to androids.
Evo400 said:
Im not worried about playstore, latest safetynet works fine with all banking and playstore.
Root for me cause of privacy, adaway is a big one, having zero ads on android is a game changer, plus being in full control via xposed is what attracts me to androids.
Click to expand...
Click to collapse
OK,I understand but try to see if the problem is solved before rooting.
I just reset the phone settings, try swapping cards into my 11T peo ( which works fine) cleared all data , cache and still dont have the dual sim option. What ever has happend as if the phone is a single sim only. And all settings, IMEI, etc only show single slot. The phone hasnt been updated either so its very strange event that lead to removal of the dual SIM.
Unless phone pushed some carrier settings update in the background, I dont know. I will flash again the same 13.0.36 fastboot and see if that helps and then go via twrp option.
Will update here
Update:
TWRP installed and I updated to latest 12 PRO version of 13.0.37
Everything went smooth, but DUAL SIM still not working. The phone is still listing one Sim 1 as if its a single sim phone?
Im speechless
Evo400 said:
Update:
TWRP installed and I updated to latest 12 PRO version of 13.0.37
Everything went smooth, but DUAL SIM still not working. The phone is still listing one Sim 1 as if its a single sim phone?
Im speechless
Click to expand...
Click to collapse
Trying to flash a stock rom without re-locking the bootloader.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Update:
I did a complete wipe and reinstall of the Xiaomi EU rom and the Dual sim is back working now. Just pain trying to backup and restore, but all working now.
Quite possible a bug in the Xiaomi eu Rom.
Evo400 said:
Update:
I did a complete wipe and reinstall of the Xiaomi EU rom and the Dual sim is back working now. Just pain trying to backup and restore, but all working now.
Quite possible a bug in the Xiaomi eu Rom.
Click to expand...
Click to collapse
A bug that you will be the only one to have, moreover no one answered you on Xiaomi eu rom.
By formatting the data everything was cleaned and possibly recreated a partition.
Root +Magisk modules or xposed,etc.. may be the cause.