I have flashed my motorola moto x style / pure with oreo 8.1 in itself everything work, but the camera.
lineage-15.1-20180727-UNOFFICIAL-clark
MindTheGapps-8.1.0-arm64-20180808_153856
open_gapps-arm64-8.1-stock-20190414
I can only use the front camera and as soon as I take a picture the camera crashes.
The rear cam doesn't show up at al.
Have done a factory reset and reinstalled everything through twrp recovery.
With mind the gapps the camera crashed.
With open gapps the camera crashed.
Emptying cashe memory or and installing another camera apps does not help. This problem is hiding within.
What can this be and is there an android version that would not have this outside of the original rom.
I've read a lot about this problem but i cant find any thread where there is a solution for me and my phone.
Update: the crash message is mediaserver crahed
I recently got a Pixel 3 updated to May OTA with Magisk installed. Everything was working fine for a week when all of a sudden, I kept getting "System UI isn't responding". I have tried removing all the root applications and modules but no luck. In the end, I had to flash the Magisk uninstaller via TWRP to stop that error.
Next, I downloaded the June factory image and used the flash-all.bat script to start new. But the same error showed up after flashing Magisk, even though I only had Titanium Backup installed (no other modules or root applications).
Am I doing something wrong or is the phone faulty? I still have time to exchange it for another one.
hey
from time to time ive the same issue on aex pie rom,weird.
-CALIBAN666- said:
hey
from time to time ive the same issue on aex pie rom,weird.
Click to expand...
Click to collapse
Same for me (last Lineage 9 . HTC u ultra)
same to me.
crDroid pie rom
Xiaomi 8 (dipper)
通过我的 MI 8 上的 Tapatalk发言
I'm searching for a solution, since I have this issue on different devices / roms.
Are you using magisk hide?
Are you using any magisk module to pass safety met?
After uptating my Xiaomi Mipad 4 Plus to Havoc OS 2.8 and also on my Mi 9 changing the rom from Pixel Experience to Havoc OS 2.8, then I don't get system ui not responding anymore and everything is working fine.
Even with magisk.
Do you lose all wifi networks after the crash?
-CALIBAN666- said:
hey
from time to time ive the same issue on aex pie rom,weird.
Click to expand...
Click to collapse
Long time no see, bro...
System ui isn't responding
I have tried clearing the cache and still no luck.. Seeing the same issue with Quickstep app too. Btw did factory reset really help?
marthaneidig8457 said:
I have tried clearing the cache and still no luck.. Seeing the same issue with Quickstep app too. Btw did factory reset really help?
Click to expand...
Click to collapse
Same here !! My device is samsung galaxy j7 nxt running Android Pie [8 Binary].
Tried every stock pir rom available nothing fixed.
From time to time i get it when i unlock phone
I just realized my camera isn't functioning anymore.
Each timeI try to open the stock camera app, the app will now say "can't connect to camera" and then quits. Other apps that make use of the camera will also complain about a problem with it.
Coincidentally, I upgraded magisk (canary build) to version ce7cb1ee (20706) last night. And I was using my camera just yesterday with no problems at all.
So I strongly suspect it may have something to do with the latest magisk build. Anything I can do to revert it back to the previous version?
(also note to self: do a full TWRP backup, and backup my own data too using methods like tar, next time before flashing new magisk)
seemebreakthis said:
I just realized my camera isn't functioning anymore.
Each timeI try to open the stock camera app, the app will now say "can't connect to camera" and then quits. Other apps that make use of the camera will also complain about a problem with it.
Coincidentally, I upgraded magisk (canary build) to version ce7cb1ee (20706) last night. And I was using my camera just yesterday with no problems at all.
So I strongly suspect it may have something to do with the latest magisk build. Anything I can do to revert it back to the previous version?
(also note to self: do a full TWRP backup, and backup my own data too using methods like tar, next time before flashing new magisk)
Click to expand...
Click to collapse
Try to flash magisk 20.3 via twrp and delete cache and dalvik
Maybe stupid question, but have you tried to reset your phone? Xd
Have you any camera mods in Magisk modules, like Camera 2 API enabler or sth?
SzczufFun said:
Maybe stupid question, but have you tried to reset your phone? Xd
Have you any camera mods in Magisk modules, like Camera 2 API enabler or sth?
Click to expand...
Click to collapse
Thanks for replying !
I am now all but certain the latest Magisk canary build (edit: version 20306) as a compatibility bug with MIUI 10.
Ended up flashing to MIUI 11, installed Magisk, no issues.
Just for the sake of testing, I used MiFlash to do a fresh install of MIUI10, then installed Magisk. Camera became useless. Flashed previous version of Magisk canary. Things went back to normal.
Because of this I spent hours upgrading to MIUI 11 (so it gave me extra motivation to finally made the move), figuring out what to debloat, and did a slow and arduous operation of moving data slowly back to the system (so I can have a clean fresh MIUI11 with empty data partition and empty storage to begin with). So all is still good i guess.
I downloaded the latest Urnyx Gcam build. I am currently on LineageOS 17.1
I went to take a selfie video. The app froze and the front pop-up camera refuses to close itself.
- I used the stock camera app to bring down the front camera, it doesn't work.
- Restarted the phone couple of times
- Factory reset
- Change ROMs
- Used the motor.apk to manually bring down the camera, doesn't work too. It says "camera alread retracted" Link: https://forum.xda-developers.com/attachment.php?attachmentid=4930537&d=1579448949
I already tried flashing an AOSP based ROM, still didnt work.
- Dropping down the phone to my bed, doesn't work
Please I am in need of help. I can't put my phone on the pocket.
Not sure if it helps, I had the same issue on lineage yesterday and for some reason this app was able to retract it.
https://m.apkpure.com/popup-camera-no-sound/com.sjh.popupcamera
harry_turtle said:
Not sure if it helps, I had the same issue on lineage yesterday and for some reason this app was able to retract it.
https://m.apkpure.com/popup-camera-no-sound/com.sjh.popupcamera
Click to expand...
Click to collapse
Thanks for the reply. I am on Lineage when this happened too.
That app you sent me didn't work tho.
Fixed the issue by formatting data and flashed back to EU ROM MIUI 12.0.3.0
Has anyone made the ANXCamera run on Poco x3 with a custom ROM?
I'm using @gardiols LineageOS 17.1 https://forum.xda-developers.com/t/rom-10-lineageos-17-1-unofficial-surya-karna.4202533/ with Magisk 22.1.
I used Magisk to install ANXCamera.190, ANXFramework.190, ANX48MPFix R.201 and (after getting stuck) Bootloop-Hotfix.190
I found two new apps, ANX Camera and ANX Scanner on my phone after flashing. While ANXScanner seems to work just fine, ANX Camera just makes a black screen (first start after reboot) or just a crash (all other attempts).
I was doing something wrong:
I am getting black screen when I open ANXCamera.
Enable all permissions manually.
Click to expand...
Click to collapse
(from a faq on github, not the anxcamera homepage)
Some fiddling later:
I still get "Can't connect to camera" in Portrait mode. event tho I have the 48 MP fix installed.
I also tried out the 64 button (in more), which stopped the camera from doing anything.
Switching to front camera crahes the app.
So it's kind of "works a little, handle with care" kind of thing.
Also: The camera that came with lineage was uninstalled when I flashed the ANXCamera files, which I did not expect.
FWIW, I recall reading somewhere that you need to start with ANXCamera.150 and open it, before going to ANXCamera.190...
This Telegram channel has the working version of ANXCamera.
Just follow the instructions,
It works fine on my Poco X3 running Evolution X 5.6
Cheers
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Blechpirat said:
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Click to expand...
Click to collapse
Works fine on Nitrogen OS
Blechpirat said:
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Click to expand...
Click to collapse
It behaves almost the same for all OSS vendor based ROMs. I have tried on crDroid and Wave. It can open, but has very slow autofocus, and inability to switch to video (will lag then crash)
It works fine on miui vendor based ROMs though.
Pardon my English
Thanks for the Update.
RogueBanana said:
It behaves almost the same for all OSS vendor based ROMs. I have tried on crDroid and Wave. It can open, but has very slow autofocus, and inability to switch to video (will lag then crash)
It works fine on miui vendor based ROMs though.
Pardon my English
Click to expand...
Click to collapse
I'm on Havoc OS ROM(not miui) and and camera is perfect. the camera works perfectly well all lenses work it's fast and video works too.
After installing Havoc ROM magisk and a custom kernel this is what I did.
Except I flashed both and straight through my recovery and not in magic.
1- Flash ANX 1.5 in Magisk.
2- Reboot and Allow all Permissions & launch the camera.
3- Now Flash ANX 2.0 in Magisk.
4- Reboot & Enjoy,Everything works Fine
It is necessary to follow the step! Otherwise there will be bugs.
©@konsumeri_mods
Thanks for the update. Is anyone able to provide the 1.5 version ?
It is in their telegram channel. Too deep to dig up. Glad that it works at me after trial and error.
Try this one, working fine for me on OSS based ROMs. But this one was the last version, further ANX camera magisk module will be developed by konsumeri.
MOD EDIT: Attachement removed
okay seems that i got a problem. captured images wont save even that it is all granted. im using anx camera 190 installed in evolution os android 11. it worked on 1.5 then after installing 2.0 it doesnt work anymore
PAPalinskie said:
It is in their telegram channel. Too deep to dig up. Glad that it works at me after trial and error.
Click to expand...
Click to collapse
Just click on the pinned message and it's the first post down.
Hello, I installed anx camera and it works great. There is also a Magisk module with which I can delete the installed camera in aosp-Rom?
Hello, I installed ANXcamera 185R in crdroid7.6. Is there a way, to save the pictures to sd-card? I can tick "Save to sd" in camera settings, but ANXcamera saves to internal DCIM-Path. After restart ANXcamera Save to sd is unticked...
Thank you.
Are we able to install ANX cam here? If we can anyone who have a link where I can get it? Thanks!
Thank you for great help...
@iSean03 : search for MOD EDIT: Link removed due to income generation
Hi im on pixel experience a11 oss vendor which version of camera should i flash oli tried 195 but ended up stucked in boot screen a step by step instructions would be appreciated