Hi ive got a teclast tpad 98 and i know this is not the right forum but its the near enough
my problem is that ive forgot the pin and this tablet does not have a stock recovery
is there a way to reset it so i can put a new pin on???
please delete this ive put in the wrong place
Related
hello,
so i just got my x1 back from my local vodafone store(after it cracked) and im trying to flash it. little problem though every time i want to hard spl i complete all the steps. but when it should progress it doesnt after some time i get a msg about the way my phone is connected so i tried a different cable didnt help. I have flashed before and i know the process so i thought W*F downloaded a video guide maybe i did do something wrong. Still no progress does anybody know what to do could vodafone have done something with my phone?
greets
sorry if i put this in the wrong place i realise now im in the development forum thought i was in the main forum sorry
fixed it hard reset worked
closed
Hello guys,
now i have got a hd7 windows phone flashed with a custom ROM. (deep shining i think ...)
After the official mango update i had the first reset. The HTC-screen freezed and i couldnt do anything, so i reset my device. After that i installed a custom rom on my phone. Until now there are 8 months since the first reset and 5 hard resets. The resets werent made by me, the phone resets himself. So can you help me please ?? What can i do to stop this ?
I've already asked this in a german forum and they answered that the issue is my mini sd card ! So i tryed to change it today. I've did it but the phone didnt recongnized my new card. So i put the old card back. I looked at my new card and it was only a simple MINI SD CARD 2GB. The card of the device is MINI SD CARD HC 16GB. So my second question is, does only a mini sd HC card fit into the HD7 ?
Good evening:
First, sorry for my bad english. I didnt know this forum until I had to dip into it, but I have read many posts and I find a place where there are people who know a lot about these issues and are saviors of people like me who only know of these issues.
I bought a Teclast x98 Air iii 32GB (M5C5) as a gift for my girlfriend for Christmas. I discovered that I could remove all Chinese applications and gain some performance by changing the ROM, and got satisfactory. But I went further and saw that he could do dual boot despite being the 32GB version. So I installa the dual Bios 2.02. So I got. But here's the problem:
The tablet is constantly restarts remaining in the screen logo with Chinese letters. I connected a keyboard to the tablet to access the BIOS to see what I could do, but I have not achieved anything. I try to flash with flash ROM Android IMT I installed the first time (with all types of wipes, changing partition tables and so on) and when loaded FlashBoot error "could not find boot device appears handle me teclast "but continuous flashing (giving others more errors in the tablet), but ends correctly (in the IMT out the green bar) and restarts. Upon restart, we return to the same, constant restart and I get nothing.
Can I flash once again other BIOS? How? Because I cant boot any SO.
I'm starting to despair because I've read English, Chinese, Spanish forums and even Italian, and no, I'm stuck and I do not wanna (if it isnt yet) turn the tablet into a brick. It going to be the most expensive Christmas gift
Thank you very much in advance who can shed me some light to solve this bundled I have done.
Greetings.
Did you find solution?
I am experiencing similar problem. Did you find solution?
BIOS/Firmware 2.02 is NOT for X98 air III but for X98 Air II or 3G only.
Now your best bet is to put back the original Firmware or another one that is fully compatible this time.
If you can't boot at all the only way to unbrick your X98 will be with the CH341A programmer, you can use my tutorial for X98 Air II 3G but again use a firmware compatible with the Air III. :angel:
Tutorials, links and Files are in my signature below.
Regards !
There is a M5C5 unbrick thread (or C5J8 posted by me) here too. Read these.
Maybe if you have DNX mode you could try to reflash the original BIOS.
Hi there,
i own a Air III (M5C5). I want to switch to Windows 10, so i flashed bios 2.05 from mireks rom packages. This went totally wrong, some of you already know this ugly problem. Yesterday i found a post in a german forum, which fixed this problem for me:
http://www.android-hilfe.de/thema/teclast-x98-air-iii-boot-probleme-nach-bios-update.747401/page-3
I flashed the unbrick.7z from RafeGruber and thank god, it is running again (came from error: efilinux, could not find boot device handle). So thanks to RafeGruber.
However, i am not responsible for any bricking you do....! I am just reporting sucess in my case.
So, back to topic: i really want to install Windows 10 (with or without android). I know all the description for Air 3G and so on and i tried many thinks, but they did not work. So if somebody is reading this who has actually done it for his very own M5C5 (32gb), please post a short description with corresponding files....
Just for clear - this tool created by ionioni in januar. It was here - http://forum.xda-developers.com/x98-air/help/baytrail-dnx-mode-bios-flashing-tool-t3295105 before he quit.
blackbile said:
Just for clear - this tool created by ionioni in januar. It was here - http://forum.xda-developers.com/x98-air/help/baytrail-dnx-mode-bios-flashing-tool-t3295105 before he quit.
Click to expand...
Click to collapse
thanks for that info. however, noone has win10 on his M5C5 running?
i feared that much...
I don't know... I have Air 3G.
Hi ive got a teclast tpad 98 and i know this is not the right forum but its the near enough
my problem is that ive forgot the pin and this tablet does not have a stock recovery
is there a way to reset it so i can put a new pin on???
ive got a Teclast tPad 98 Octa Core (revision M1E9)
i need a stock ROM with Scatter file
the Teclast site wont let me download it is there anywhere else i can download it from?