After several time failing to flash persistent TWRP, i figure out that miui boot image overwrite custom recovery maybe. Thus, although flashing twrp via adb successfully but it will go back Mi recovery after reboot device.
Let follow my step to reach successful installation persistent TWRP
1. Unlock bootloader your device is prerequisite
2. Down load ADB & TWRP(sakura).img
3. Access into fastboot mode by holding Pow + vol-
4. Shift + Righ click at ADB folder and chose "open command window here"
5.Type command "fastboot flash antirbpass twrp.img" => your sakura will access into TWRP
Not use command "fastboot flash recovery twrp.img" ortherwise you will get error : FAIL (remove: rollback version downgrade)
Remember : never let your device boot into Miui otherwise you will fail
6. In TWRP chose wipe/format data – type yes .After that you chose reboot/recovery. Now your device return fastboot mode again
7.In PC type command "fastboot boot twrp.img" => your device access into TWRP
8. In TWRP chose install/install image then select file TWRP.img and sweep for installing
Now TWRP was installed persistent in your device
TWRP: https://dl.twrp.me/sakura/
nguyenduytrungts said:
After several time failing to flash persistent TWRP, i figure out that miui boot image overwrite custom recovery maybe. Thus, although flashing twrp via adb successfully but it will go back Mi recovery after reboot device.
Let follow my step to reach successful installation persistent TWRP
1. Unlock bootloader your device is prerequisite
2. Down load ADB & TWRP(sakura).img
3. Access into fastboot mode by holding Pow + vol-
4. Shift + Righ click at ADB folder and chose "open command window here"
5.Type command "fastboot flash antirbpass twrp.img" => your sakura will access into TWRP
Not use command "fastboot flash recovery twrp.img" ortherwise you will get error : FAIL (remove: rollback version downgrade)
Remember : never let your device boot into Miui otherwise you will fail
6. In TWRP chose wipe/format data – type yes .After that you chose reboot/recovery. Now your device return fastboot mode again
7.In PC type command "fastboot boot twrp.img" => your device access into TWRP
8. In TWRP chose install/install image then select file TWRP.img and sweep for installing
Now TWRP was installed persistent in your device
TWRP: https://dl.twrp.me/sakura/
Click to expand...
Click to collapse
there is an easier way ,,...
stock miui stock miuui recovery:
fastboot boot twrpname.img
in booted twrp flash twrp img.
done
Related
Hi!
First i want to apologize for my english and if i made a mistake posting a new thread.
I own an ASUS Zenfone GO (ZB452KG) and i tried to install a twrp recovery.
The phone it opens and get stuck on the asus logo and cant go cant go throught in recovery mode.
i already install the latest adb and usb driver.
please can you help me guys how to fixed my phone?
U should install twrp recovery by computer and install a custom rom for ur device.here is the way for installing twrp.
1)Goto official TWRP page and download twrp-2.8.x.x-xxx.img file for your Asus Zenfone Go ZB452KG. Keep twrp-2.8.x.x-xxx.img file in a separate folder.
2)Your PC must have ADB & fastboot installed and configured.
3)Now connect your device to your PC and goto twrp folder and press and hold shift then rightclick on white space and "Open command window here".
4)Now type following commands at command prompt.
"adb reboot bootloader" - to boot your device into bootloader.
after booting into bootloader type "fastboot flash recovery twrp-2.8.x.x-xxx.img" - this will flash TWRP recovery on your Asus Zenfone Go ZB452KG.
"fastboot reboot" - to reboot your device.
After reboot type "adb reboot recovery" - to boot into recovery mode.
If it is useful then hit a thanx.
raymond_bqg said:
U should install twrp recovery by computer and install a custom rom for ur device.here is the way for installing twrp.
1)Goto official TWRP page and download twrp-2.8.x.x-xxx.img file for your Asus Zenfone Go ZB452KG. Keep twrp-2.8.x.x-xxx.img file in a separate folder.
2)Your PC must have ADB & fastboot installed and configured.
3)Now connect your device to your PC and goto twrp folder and press and hold shift then rightclick on white space and "Open command window here".
4)Now type following commands at command prompt.
"adb reboot bootloader" - to boot your device into bootloader.
after booting into bootloader type "fastboot flash recovery twrp-2.8.x.x-xxx.img" - this will flash TWRP recovery on your Asus Zenfone Go ZB452KG.
"fastboot reboot" - to reboot your device.
After reboot type "adb reboot recovery" - to boot into recovery mode.
If it is useful then hit a thanx.
Click to expand...
Click to collapse
i cant go through in to the bootloader
kboy22 said:
i cant go through in to the bootloader
Click to expand...
Click to collapse
U didn't mention that .is bootloader unlocked or locked?
raymond_bqg said:
U didn't mention that .is bootloader unlocked or locked?
Click to expand...
Click to collapse
sir i cant find the twrp-2.8.x.x-xxx.img that you mentioned on your post
It's works without pc. Just download it's latest firmware from ASUS official web, put the zip file to sd card then install it by recovery mode.
IMPORTANT NOTE ABOUT ROOTING:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting.
REQUIREMENTS
1- Unlocked Bootloader (search on google if you dont know how to unlock)
2- Drivers and Adb/Fastboot commands knowledge
--------------------------------------------------------------------------------------------------------------------------------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
Bugs:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the serial number folder seems to change (which means that on /TWRP/BACKUPS/serialnumber/backupsinside/ changes every reboot so you have to go get the backup inside the old serialnumber folder and put on the new serialnumber folder).
Im leaving an unsecured boot image because system does not boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
Steps to Install TWRP and root
1. Download and extrct the files: https : // drive. google . com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip ---
Continuation 6. Step by Step of Step 6 since people seem to have been running into issues with it:
After rebooting to TWRP and having SuperSU.zip in the tablet storage. Go on Install tab and press the supersu file and install/flash it then reboot the device.
while installing custom twrp recovery my phone is stuck on leeco bootloader screen plssss help
cjcool_123 said:
while installing custom twrp recovery my phone is stuck on leeco bootloader screen plssss help
Click to expand...
Click to collapse
1- Download Adb drivers file zip and extract it to a folder.
2- Dowload Twrp recovery image and place it into adb driver folder.
3- Go to Settings
4- About Phone
5- Click on "Build Number" for several times which enables Developer Options
6- Open Enable developer options
7- Allow oem unlock
8- Power off
9- Hold Volume down + Power for Fastboot mode
10- Run this command on Fastboot Command Prompt "fastboot oem unlock-go".
11- Run this command "fastboot flash recovery twrp.img" (P.S - "twrp.img" is the twrp image file).
12- Run this command "fastboot boot twrp.img (P.S - "twrp.img" is the twrp image file).
13- TWRP will boot and you are ready to do flashing.
haardx said:
1- Download Adb drivers file zip and extract it to a folder.
2- Dowload Twrp recovery image and place it into adb driver folder.
3- Go to Settings
4- About Phone
5- Click on "Build Number" for several times which enables Developer Options
6- Open Enable developer options
7- Allow oem unlock
8- Power off
9- Hold Volume down + Power for Fastboot mode
10- Run this command on Fastboot Command Prompt "fastboot oem unlock-go".
11- Run this command "fastboot flash recovery twrp.img" (P.S - "twrp.img" is the twrp image file).
12- Run this command "fastboot boot twrp.img (P.S - "twrp.img" is the twrp image file).
13- TWRP will boot and you are ready to do flashing.
Click to expand...
Click to collapse
The problem with this suggestion, however well intentioned, is that the user said they were stuck at the boot logo - so they couldn't go to settings in the phone - cause it doesn't complete bootup in the first place.
I'm in the same situation (stuck at LeEco boot screen) and stumbled on this thread hoping there would be a solution...
cjcool_123 said:
while installing custom twrp recovery my phone is stuck on leeco bootloader screen plssss help
Click to expand...
Click to collapse
Give this a try as your last solution.. Worked for me
https://forum.xda-developers.com/le-2/development/tools-unbrick-thread-leeco-le-2-x52x-t3634609
I have was trying to flash the TWRP recovery in my phone (Redmi 4a), but the recovery always got replaced after every reboot with the STOCK recovery.
I am now going to show how to flash this, beside the command line technique......(Although, some command line is necessary).....
1. Set adb and fastboot files in your Windows pc, fine
2. Now download the required twrp on to your pc and place it in adb-fastboot's folder.... or techies could path to that ****....
3. Enter bootloader with.....
adb reboot bootloader4. Now boot to twrp using......
fastboot boot recovery.img(I have named that twrp file as recovery)
5. Download super su zip, move it in phone, root your device....... reboot your device.......Now the second phase of process comes
6. Install twrp app in your phone, open it, copy the twrp image file to phone, tap on flash recovery
7. Select your twrp recovery in the phone and boom....... you have done it...... reboot to recovery by adb reboot recovery
I FORGOT TO MENTION, you should have your device unlocked, and I AM NOT RESPONSIBLE FOR ANY MISHAP and FOR THE STATE TO PLAY CRICKET WITH YOUR PHONE...... I am honest ....... IT WORKED FOR ME......
any tester n confirmed worked ?
No reason to do all those, you can flash recovery directly from fastboot with one command. The command:
Code:
fastboot boot recovery.img
just boot to that recovery one time. This is good for testing a recovery or use it for one time without install it.
If you want to flash a recovery you just need to use:
Code:
fastboot flash recovery recovery.img
Also for both commands isn't necessary to rename the recovery file or to put it adb folder, or root the device. Just need to specify the path and filename in place of "recovery.img". For e.g:
Code:
fastboot flash recovery C:\Phone\Recoveries\twrp_3.2.1.img
Hi All,
The following has been done.
enable usb debugging > adb devices (shows my device)
disable driver signature verification in Windows 11 > install the driver to be able to unlock my bootloader and use the fastboot devices command.
adb shell > getprop ro.build.ab_update > false
adb reboot bootloader
fastboot devices (shows my device)
fastboot flash recovery filename (SHRP/TWRP/PBRP).img
fastboot reboot recovery
But still unable to boot into the customer recover img, it only boots into the stock rom after sometime.
or
fastboot boot (SHRP/TWRP/PBRP).zip > (FAILED (remote: image is not a boot image')
Any pointer as to why?
i had the same problem... but after a lot of search... the answers were here ---> https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
in particular where it tells that before flashing a recovery you need to flash the correct vbmeta
vbmeta for 13.0.2 is in the list if you follow the suggested link in the post i mentioned
then you can flash a recovery for the 13.0.2 ( i used the project arrow one )
Thanks for your reply tigrato.
I have followed the link below.
"You need to disable verification for vbmeta too. Here, you can find patched vbmeta with disabled verification: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/"
fastboot --disable-verity --disable-verification flash vbmeta vbmeta_vd171--V13.0.2.0.SJOMIXM.img
&
fastboot flash vbmeta vbmeta_vd171--V13.0.2.0.SJOMIXM.img
Ran with success, but when I run,
fastboot flash recovery filename (SHRP/TWRP/PBRP).img
But still unable to boot into the customer recover img, it only boots into the stock rom after sometime. If I power off + volume +, or adb reboot recovery I am in the MIUI recovery 5.0 main menu.
Thanks
Finally..able to install magisk with the below command.
fastboot flash boot magisk_patched-25200_ganYk.img
make sure you enable su in the app.
adb shell > su
But...
fastboot flash recovery filename (SHRP/TWRP/PBRP).img
Unable to boot into the customer recover img, it only boots into the stock rom after sometime. If I power off + volume +, or adb reboot recovery I am in the MIUI recovery 5.0 main menu.
Just don't use TWRP, there's custom os recoveries that work pretty well on miui 13 a12, you can try lineage or crdroid recovery, or just downgrade to miui 12 a11 and I can send you a working TWRP.