My mom's nook has this strange sort of discoloration that seems to line up roughly with the edge of the pocket on the inside of her case. It's sort of like if you press on a regular LCD screen, you'll see a white patch. But this is sorta permanent and in a line up and down for over half of her screen.
Any one have any suggestions on this? Could she have just had too much stuff in that pocket for too long and permanently messed up the screen underneath the glass? Or would this be something that might correct itself over time? It's well past warranty unfortunately...
No feedback on this?
Sent from my Nexus 7
It happened to me. Seems permanent. Once I realized it was in exactly the same spot as the edge of the pocket in my B & N leather cover, I replaced the cover with one that did not have a pocket. A year later and the line's still there.
Was your case like the inside of this one?
So I bought an mEdge cover from Walmart and I also installed a clearcoat screen protector on the tablet just after receiving my tablet on Dec12. A week ago I started noticing a faint purple "shadowy, airbrushed" line in the middle of my screen when there's a bright white background on. At first I thought it had to do with the screen protector, but no matter how much I'd wipe the screen free of smudges I would still notice the airbrushed line.
I then suspected that it had to be the cover since the line matched up with the middle crease of the cover's flap and wondered if the magnets had anything to do with it. The magnets were located at the edge of the flap so that was ruled out.
I then searched online and came across a forum with a person having this problem on his phone, and he found out that it was due to pressure being applied to the screen from the case, and that he was notified that was a common problem with LCD screens. That pressure to the LCD would cause a permanent distortion and leave a "phantom" outline of where the pressure was being applied.
I'm so bummed now, because according to what I've read there is no fix for this, besides changing the screen or just getting a replacement.
It's not that bad right now, since you have to "look" for it but it's noticeable on a white screen and it bothers me. I love the cover and think it's one of the best for the Nexus 7 but I'm afraid it might make it worse. Does anyone else have this problem? and what kind of cover are you using? Finally, I know I've said it's permanent, but does anyone have a solution for this besides changing the screen or getting a new Nexus 7?
Hi guys.
I have an issue with my new Note 5, which I bought 4 days ago. However, I had this problem with my old Nexus 5 as well. I want know what the issue is so that I can avoid it in the future.
Basically, after a few days/weeks my touchscreen will have a white hue/smudge in the center when the screen is off. I can see it clearly in the sun, it stands like a white stain in the middle and it's been only 4 days. I remember I avoided this with my Nexus 5 by applying a protective screen but after I took it off, in matter of weeks the smudge appeared.
I could put a protective screen on the Note 5 but I read that it interferes with the S pen. If it doesn't interfere, I'll go right away and apply one. However, I want to know what causes this. I haven't dropped in water and I mostly keep it in my pockets and at home on the table.
Thank you guys.
I have a Zag glass screen protector on mine and the S pen works fine
I was skeptical of glass screen protectors until one was placed on my new Note 5 at Sprint. Sold on it now.
Sent from my SM-N920P using Tapatalk
I don't really know what you're talking about. I've never, particullary, heard something like this. In this cases, you really should attach a photo so we can figure out what's your problem. A "white stain" could be anything: from dust to your hands sweat or even actual damage in the screen itself. I've subscribed the thread to investigate further about this, please consider to send me a photo of it. Cheers!
PD: No, every screen protector work perfectly with the S-Pen no matter of how thick they're (the S-Pen could work even at 1 cm of the screen itself).
saw these guys on facebook (sponsored post) - looks interesting but i cant find any reviews of their products on youtube etc - no influences or anything!
https://youtu.be/5ZaD7FmWQS4
https://www.bare-cases.com/pages/pane-samsung
https://www.bare-cases.com/collections/screen-protectors/products/bare-pane-for-galaxy-note-8
they say its compatible with most cases as long as the lip isnt too high
anyone have any experience with them or any tempered glass they'd recommend (especially one thats compatible with the ringke fusion)
Well, looks promissing!
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
dschachm said:
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
LOL
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Jammol said:
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Click to expand...
Click to collapse
I don't think we'll ever seen one for the Note 8.
Sent from my SM-N950U using Tapatalk
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
princeasi said:
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
Click to expand...
Click to collapse
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Link575 said:
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Click to expand...
Click to collapse
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
princeasi said:
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
Click to expand...
Click to collapse
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Link575 said:
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Click to expand...
Click to collapse
Agreed!
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
itoYo said:
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
Click to expand...
Click to collapse
Ugh sounds like too much work lol
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Tested these a month ago. Cracked two working out bubbles. Glass quality is very bad. One cracked on the right side. The other on the bottom using a fingernail to work out a bubble. No chance that this is good 9h tempered glass. Opened a dispute and got both refunded. My opinion, not recommended.
Not recommended too, to narrow, covering edges with black bars completely.
http://s.aliexpress.com/rEZfMny6?fromSns=Copy to Clipboard
Not recommended too, same bad glass like the one posted and cutting display on the bottom
BBSW
http://s.aliexpress.com/BNjmaqIR?fromSns=Copy to Clipboard
Gesendet von meinem SM-N950F mit Tapatalk
ok so i purchased one and it arrived yesterday
while applying it i got some dust stuck under the protector, tried to take it out but it wouldnt move
applied it anyway and its pretty good except for the air bubbles near the curved sides of the screen (and the dust particles)
the protector is really fragile too, it chipped and cracked a corner while working out the bubbles - others have complained that theirs cracked for no reason
other than that it actually feels amazing and is compatible with the ringke fusion
ive contacted support, hopefully theyll send me out a new one
I wonder why they disabled comments in their video?
What's the best between this one and Dome Glas ?
I don't like the cut around speaker - face camera ...
A real full cover for front face is the most beautiful but may be not very good for quality of face camera ???
Hi.
I got this phone about 5 months ago, and i was not regularly using it to make phone calls... but unfortunately now i have to, since i smashed my main phone.
Anyway, it worked perfectly until last week.
Now, whenever i get called, or i'm trying to call someone, the display goes black. I cannot see who's calling and cannot answer the call, unless i drag the drop-menu (usually notifications are displayed there) from the top; and if i'm the one trying to call someone, the moment i press call the screen goes black and cannot use the phone until either the person answers and then hangs up, or i have to wait for that robot to finish it's speech ...
Games like CoD mobile and Lineage Revolution work fine, but i need to be able to use the phone now (
This morning i whipped the device clean, but it still does the same.
Please help.
Thank You.
I had the same problem turned out to be the glass screen protector I was using, if your using one take it off and try calling someone.
Sent from my NX629J using Tapatalk
bezzer8812 said:
I had the same problem turned out to be the glass screen protector I was using, if your using one take it off and try calling someone.
Sent from my NX629J using Tapatalk
Click to expand...
Click to collapse
Thank you mate.
Never would have thought that the problem started when i changed the screen protector.
Thanks.
iPlayPingPong said:
Thank you mate.
Never would have thought that the problem started when i changed the screen protector.
Thanks.
Click to expand...
Click to collapse
No problem bugged me for ages until I tried it lol.
Sent from my NX629J using Tapatalk
Do not buy the tempered glass screen protector from Nubia for the 3/3S. Customer service has admitted it interferes with proper operation of the proximity sensor.
Red Magic (Red Magic)
Jan 9, 22:37 CST
Hello, thank you for your contact. After attaching the tempered film, it will have a slight impact on the proximity sensor of the mobile phone. It is recommended not to paste the tempered film.
benc51 said:
Do not buy the tempered glass screen protector from Nubia for the 3/3S. Customer service has admitted it interferes with proper operation of the proximity sensor.
Red Magic (Red Magic)
Jan 9, 22:37 CST
Hello, thank you for your contact. After attaching the tempered film, it will have a slight impact on the proximity sensor of the mobile phone. It is recommended not to paste the tempered film.
Click to expand...
Click to collapse
Wow they made the same error even on the s variant I have a feeling there going to have low repeat customers I for one won't being buying anything from them again.
Sent from my NX629J using Tapatalk
Is there a way to disable the proximity sensor entirely?
maybe it's a little late but, I realized that by using a matte type mica the problem was solved
buy here