Hello forum,
I have the problem that my 7 plus is rebooting from time to time. Then I have to insert my PIN to unlock my SIM card...
I did a hard reset and installed only the most important apps. I did the latest udates...
Do you have any idea for my prolbem?
thx
Related
Hi all!
I´d like to ask your help regarding sensation xl that is always asking to insert the unlock screen password.
I've already tried to perform factory reset but it keeps asking for the unlock screen password.
Even inserted the gmail credentials after inserted to many times the wrong password but unlocking was insuccessful...
Any help would be great!
pimentones said:
Hi all!
I´d like to ask your help regarding sensation xl that is always asking to insert the unlock screen password.
I've already tried to perform factory reset but it keeps asking for the unlock screen password.
Even inserted the gmail credentials after inserted to many times the wrong password but unlocking was insuccessful...
Any help would be great!
Click to expand...
Click to collapse
clear the sdcard. (Format it via recovery or pc) and than factory reset
Hi
i bought today the lg p880. i updatet it with the support tool to 4.1.2. works great. then i made a hard reset.
Now i have to make the wizard new. all ok. i insert the datas from my google account. all the checkboxes etc. but then i come back to the screen, where i have to choose, if i want create a new account or wanna juse a allready createt one. a loop.
i find no solutions in the net. hopw someone can help me, without any break or something like that.
Streetdragon said:
Hi
i bought today the lg p880. i updatet it with the support tool to 4.1.2. works great. then i made a hard reset.
Now i have to make the wizard new. all ok. i insert the datas from my google account. all the checkboxes etc. but then i come back to the screen, where i have to choose, if i want create a new account or wanna juse a allready createt one. a loop.
i find no solutions in the net. hopw someone can help me, without any break or something like that.
Click to expand...
Click to collapse
Boot the phone into recovery, factory reset and try again.
you mean voulume down+ power buttom
and there the wipe data options? i allready tried all three wipe options and get the same stuck.
Streetdragon said:
you mean voulume down+ power buttom
and there the wipe data options? i allready tried all three wipe options and get the same stuck.
Click to expand...
Click to collapse
When you do the wipe, does it then take you back to the default Google setup screen on the phone?
after the wipe i start the phone and then i come direktly to the setup wizard. enter the simcode, and contine with the wizard. Language new or old account etc. and then the funny enter a konto loop
Streetdragon said:
after the wipe i start the phone and then i come direktly to the setup wizard. enter the simcode, and contine with the wizard. Language new or old account etc. and then the funny enter a konto loop
Click to expand...
Click to collapse
"SIM Code"? You have a lock code on your SIM card? If so then search - I'm sure I have read about CM having major issues with SIM code locks.
a problem with the normal pin of my sim card? the 4 char pin?
Streetdragon said:
a problem with the normal pin of my sim card? the 4 char pin?
Click to expand...
Click to collapse
Yes. Try sticking the SIM card in a different phone, disable the SIM lock code and try the install again.
but i dont have a lock. its a prepaidcard. no contract or something like that.
but i wil ltest f i can unlock something on this card
or is it possible to skip the startup wizard?
tried it one more time. i isert my konto, gone though the steps and befor i come to the normal phonescreen i come to the step, where i have to add a konto.
and i didnt found something to unlock on my card
OK i got the problem!
on the toilet you have the best ideas. i startet the phone without the simcard. it skiped the wizard automatikli.
But thanks for the idea with the simcard!
Help.. I have a Huawei P10 (VTR-L09) with Android 8.0 and stock rom and recovery. I've lost the pin code and now it requires the pin after a phone reboot... So I can't access my phone anymore.
Every solution I find on the internet is either only for Samsung or not supported for this phone. Does anyone know how to unlock it now?
Please note that USB Debugging is not enabled in settings as I got the phone back from repair only a few weeks ago so only got fastboot commands. But I really do not want to factory restore it...
Thanks for any assistance!
You could contact your Phone company and tell them you've lost your Pin and PUK. They only need the Numbers from your Sim-card.
Thx for your message GAMaus, but I've lost the phone pin and not the SIM pin. Do you think they can really help me with that?
Marcoevich said:
Thx for your message GAMaus, but I've lost the phone pin and not the SIM pin. Do you think they can really help me with that?
Click to expand...
Click to collapse
my friend was with the same situation, he goes to service center and they fix it but he lose all data.
or try with some gsm repair service maybe they can unlock without losing any data, but if your device is encrypted in my opinion is not possible without factory reset
It's not possible to unlock your phone without the correct PIN. Only chance to get into your phone is to wipe data in eRecovery. But this will remove all your user data except the data on SD.
You're also not able to get your data through TWRP because the /data partition is encrypted. To decrypt, you need your PIN.
But there's one question I have: The P10 has a great fingerprint reader and you're telling me, that you didn't assign your fingerprint for unlocking your phone?
Jannomag said:
It's not possible to unlock your phone without the correct PIN. Only chance to get into your phone is to wipe data in eRecovery. But this will remove all your user data except the data on SD.
You're also not able to get your data through TWRP because the /data partition is encrypted. To decrypt, you need your PIN.
But there's one question I have: The P10 has a great fingerprint reader and you're telling me, that you didn't assign your fingerprint for unlocking your phone?
Click to expand...
Click to collapse
he probably was forced to put his pin because of that 3 days option
Jannomag said:
But there's one question I have: The P10 has a great fingerprint reader and you're telling me, that you didn't assign your fingerprint for unlocking your phone?
Click to expand...
Click to collapse
Yeah the fingerprint doesn't work after startup because Huawei wants you to remember your pin... But fortunately I could try endless possibilities with the pincode (only sometimes I needed to wait a few hours). But in the end I got the pincode correct, so I can use my phone again
Thanks everyone!
hi every one
i just fix my screen and replace it after one year of no use
but i forget the pattern and the pass key i put it i didnt want to reset the phone because a lot of memories on it
any help in recover the data then i can reset it or bypass the lock ?
N920C this is the model
thanks in advace
note i tried put twrp recovery but the frp is on
My phone got stuck in bootlop after updating the march 2019 security patch. I had to get new phone as Amazon replaced it . Please don't update the new security patch it will kill your phone and there is no support to it from the company. To avoid getting stuck switch on the OEM UNLOCKING IN DEVELOPER OPTIONS so you can flash a new rom if you ever get stuck .
Hope it was helpful.
If anyone getting the same issue please tell me the fix for the same.
You should have remove the sim tray, so as they say before updating.
shizuni said:
You should have remove the sim tray, so as they say before updating.
Click to expand...
Click to collapse
I tried that too it doesn't work. And after using the oem unlocking i was able to flash an official rom .
__adiimathur said:
I tried that too it doesn't work. And after using the oem unlocking i was able to flash an official rom .
Click to expand...
Click to collapse
Just to clarify, u didnt put back the sim tray after update and then restarting right?
No my sim tray was ejected .
__adiimathur said:
No my sim tray was ejected .
Click to expand...
Click to collapse
Ejected before installation untill restart?
shizuni said:
Ejected before installation untill restart?
Click to expand...
Click to collapse
I got my new mi a2 and i havent updated the device yet can you pls help me out wht to do? i really wanna update to get this over with.
__adiimathur said:
I got my new mi a2 and i havent updated the device yet can you pls help me out wht to do? i really wanna update to get this over with.
Click to expand...
Click to collapse
If u have wifi, remove the sim tray before updating, and remain removed during installing and dont put it back untill full restart
Pls don't put back the sim tray if it is during the boot sequence when u restart, it will boot loop during March security update.
I finally successfully updated my phone without any bootloop. The only way to do it is to remove the sim tray as mentioned before while updating.
Steps for updating successfully.
1. REMOVE YOUR SIM TRAY.
2. Connect to wifi.
3. Download the security upadte.
4. DO NOT INSERT THE SIM TRAY UNTIL AND UNLESS THE UPDATE PROCESS IS COMPLETE.
Once the phone is updated successfully, you are free to insert your sim tray back in and from now on there will be no problem in installing any future updates.