Related
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Charles Broccoli said:
I think you need to start reading some threads around here, once you have installed the TWRP for the S3, you cannot get OTA to work again and their are other numerous issues too, as of yet nobody can fully restore back to stock. So start reading.
Also a few people here do have flashable firmware that might help but it will never be a full stock recovery unless something is fixed.
Click to expand...
Click to collapse
I think you need to CAREFULLY read this thread before thinking of writing something.
I did not ask for OTA updates. I did not ask for stock. I asked for a functioning TWRP backup of the Le S3. Thats it.
Rico
Please play nice ppl
Deleted
iamrico00 said:
Hey guys, I was playing around with the leeco s3 and I think I over flashed something or other. It's not exactly working right. Can someone please upload a complete btwrp backup of their le s3 x522 on 18s, 19s or 20s?
Thanks in advance!
Rico
Click to expand...
Click to collapse
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
britdude said:
take a look in this thread, you will find a link..i think page 3/4 Extreme99 wrote some dirctions...it has a link to his twrp 19s backup which i know works
Need x522 stock .019s rom. Lost IMEI, baseband, etc.
Click to expand...
Click to collapse
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
iamrico00 said:
Thanks, Ive seen this post as well, it is 19s but is the boot partition (i think) and data partition, no recovery or system partition.
I was curious if anyone had a complete backup of working system, recovery, boot, data partitions for restoring?
Also I get this odd error 7 when trying to restore it, anyone know what is going on?
Thanks
Rico
Click to expand...
Click to collapse
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Official twrp work too... Just ota fuxed
---------- Post added at 06:04 PM ---------- Previous post was at 05:43 PM ----------
Also i noticed for le s3, the update is 5.8.020s instead of the 5.9.020s that's available for the chinese le 2
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
iamrico00 said:
Thanks, I thats one I tried, I get the OS and it boots ok. Phones ok, but bluetooth and wifi cashes a crash.
Any ideas?
Thanks
Rico
Click to expand...
Click to collapse
I've used that twrp baclup numerous times without a problem.....
i would suggest, going back to twrp, and erase data, then restore again and see what happens
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
xterminater07 said:
Good news guys! I was able to get the official le s3 from leeco directly!! I will upload it soon, it is 5.8.020s.
Click to expand...
Click to collapse
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
Full? How can we flash it?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
britdude said:
go to this link and have a look..
It's done thru TWRP
http://forum.xda-developers.com/le-2/development/le-s3-factory-image-5-8-020s-directly-t3527790
Click to expand...
Click to collapse
You tried that way?
Posted using a calculator and delayed by AT&T.
jose makalolot said:
You tried that way?
Posted using a calculator and delayed by AT&T.
Click to expand...
Click to collapse
yes i have tried that way, i have also tried it a diff way if you read down a few comments...
its on my phone running smooth which ever way you go...its all good
xterminator07 has worked hard at getting this full rom file for us..
please thank him
britdude said:
the post i sent you too, and the twrp back up in there at step 6 is all you need to restore your system to 19s..
it will not give you an error, but make sure you are using the chinese twrp
the error is what you are getting trying to flash the OTA thru twrp...dont worry about it as the OTA's will not install
Click to expand...
Click to collapse
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
potatoalien said:
Hey, do you know where I could find the Chinese TWRP that allows me to flash the original stock EUI rom? I flashed LineageOS but the camera is not perfect, so I wish to go back to EUI but I cannot figure out how to install it without seeing errors such as "this package is for "le_s2_na" devices. Your device is a "s2"." Could you point me in the right direction? Maybe a download link for the Chinese TWRP that people claim works? Thanks!
Click to expand...
Click to collapse
You need to unzip the firmware file, remove top 2 lines from META-INF\com\google\android\updater-script and zip it again, it will remove the platform check. However device still does not boot, I tried to install both 20S and 21S multiple times. My guess is we need the original recovery partition image for X522 and I could not find it anywhere.
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
virx14 said:
I resolved it. Took 2 days and dozens of flashes. As far as I can tell the key was to wipe everything - system, cache, data, internal storage, then reboot into bootloader again and into Chinese TWRP.
So the process would be:
1. power off the phone. Hold VolumeDown button and power on. It loads into bootloader.
2. fastboot oem unlock-go
3. fastboot boot twrp.img.
4. In TWRP wipe EVERYTHING
5. In TWRP reboot -> bootloader.
6. repeat 2-3.
7. On PC: adb push S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip /sdcard
8. In TWRP click right button on the bottom and select English. Click "Do not allow modifications." Install the zip file you just uploaded.
9. Reboot.
Click to expand...
Click to collapse
Hmm I might try that later, but what would I do if I get the classical error ("this package is for "le_s2_na" devices")? Will that error not show up if I follow your method?
Most custom ROMs for the OnePlus 5 are now supporting encrypted devices only. However, some users choose to keep their device in a decrypted state for MultiROM support and for other reasons. If you follow the steps below, you can flash any encrypted ROM on your decrypted device (without losing data) and your device will remain decrypted! I found this information in one of the many threads I've read (I don't remember which one) and thought I'd post it here to help others and for easy reference. Enjoy!
Follow These Steps:
1. Boot into TWRP
2. Wipe caches, data, and system partitions
3. Flash encrypted ROM
4. Flash GApps
5. Flash Magisk
6. Flash no-verity-op5.zip (not created by me)
7. Reboot
8. Enjoy!
If you closely follow the instructions above, you can enjoy any ROM on your decrypted OnePlus 5 and have the best of both worlds! :highfive:
Note 1: If device gets stuck at OnePlus boot animation after following all of the steps above, hold the power button for 10 seconds to turn off device. Power the device back on and it will boot successfully into the ROM.
Note 2: Some ROMs are not compatible with MultiROM without the inclusion of additional commits by ROM developer.
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Tested it yesterday with aosip and all data are on internal storage. Flashed validus today without no-verity-op5.zip and it worked too. Didn't lose data on internal storage...
Gesendet von meinem ONEPLUS A5000 mit Tapatalk
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Yes, I have followed these steps to flash MANY encrypted ROMs on my decrypted device.
Confirmed to work successfully! :good:
Creeper36 said:
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Click to expand...
Click to collapse
I've found that flashing SuperSU (instead of Magisk) on encrypted ROMs often ends in a bootloop on my decrypted device. Flashing Magisk seems to be a requirement.
Not working for me. Tried with AICP release from 9/11. Wiped caches, system, data. Flashed rom. flashed gapps (tried stock/full/micro). Flashed magisk (also tried without). -> Bootloop
//edit
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
nico2195x said:
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
Click to expand...
Click to collapse
No, I believe your device must be decrypted to flash decrypted ROMs.
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
sjamie said:
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
Click to expand...
Click to collapse
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Sent from my Nexus 6 using XDA Premium HD app
shadowstep said:
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
Click to expand...
Click to collapse
And there's a thread I started for using FDE.
It works with most ROMs...
https://forum.xda-developers.com/oneplus-5/development/op5-disk-encryption-enabler-op5-t3672477
glockman4519 said:
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Click to expand...
Click to collapse
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
arjunarora said:
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
Click to expand...
Click to collapse
In addition to what is stated here, if you flash Magisk immediately after flashing the full firmware zip (no rebooting between steps), TWRP won't get replaced with the stock recovery. This is a great time saver!
Any method to get oxygen os as a secondary ROM with multirom?
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
sjamie said:
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
Click to expand...
Click to collapse
Darn, well thanks for the reply
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Have you tried flashing OxygenOS, the no-verity zip and Magisk?
glockman4519 said:
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the feedback and I'm glad this thread could provide you the guidance you needed.
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance
avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.
should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs
For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.
Guys, some auto rotate work but mostly it not. Whether, am on custom or stock ROM.
Please help me with this issue.
How to make auto rotate work perfectly?? Or I should go to service centre???
did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again
sam00561 said:
did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again
Click to expand...
Click to collapse
Yes. Now so what I have to do??? Flash q ROM or pie ROM with fastboot. Pls let me know bro
If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.
sam00561 said:
If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.
Click to expand...
Click to collapse
You mean miui q ROM.
Basically flash back the rom which came with your phone I assume that would have been pie .
sam00561 said:
Basically flash back the rom which came with your phone I assume that would have been pie .
Click to expand...
Click to collapse
Yes it was pie but I don't know version. So can I flash q rom.
Am already on miui pie
I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.
sam00561 said:
I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.
Click to expand...
Click to collapse
Buyed from flipkart
gurwinderr84 said:
Buyed from flipkart
Click to expand...
Click to collapse
Are you in India
sam00561 said:
Are you in India
Click to expand...
Click to collapse
Hnji, India
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
He's in India so likely best option is the stable India rom to flash. I tried posting the link but xda won't allow.
kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Am on India miui 10.3.5.0 using oragefox recovery
kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Please tell me solution
Wow are you still trying to fix this issue can you join the k20 pro telegram group there's many developer in there who can help straight away.
Yes pls help to solve issue
gurwinderr84 said:
Please tell me solution
Click to expand...
Click to collapse
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend
kitsune_snake said:
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend
Click to expand...
Click to collapse
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??
gurwinderr84 said:
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??
Click to expand...
Click to collapse
Allright, first I never mentionned anything about flashing a fastboot rom, so you need to take it easy and follow instructions attentively (don't panic it's all gonna be okay)
Since you relocked your bootloader you just have to unlock it again using the many guides posted on this forum (I will not help you with this since there's already plenty of thread on the subject)
after your bootloader is back to an unlocked state, you re-installed OrangeFox and you flashed the ROM you want follow the procedure I typed to the letter and you'll be fine.
As for how to flash the "persist.img". In the "files" tab in OrangeFox just tap on the "persist.img" file and in the window that opens you will have a chance to select to which partition you wanna flash the file (you need of course to select the "persist" partition)
Guys, I decided to install custom firmware, but I met a bunch of problems.
I chose this recovery https://4pda.ru/pages/go/?u=https:/...4690/fsdownload/krdcaHlb9/TWRP_A30&e=94266802 and installed it through One, the recovery is loading, everything is fine. Then I decided to install Lineage OS 17.1 (https://w3bsit3-dns.com.ru/forum/index.php?showtopic=948701&view=findpost&p=90491345), BUT after a successful installation of the image it loads me into recovery again, and in the reboot section it says "no os installed ". At the moment, I can’t install any os - he writes that it is successful but eventually reboots into recovery. I will be glad to any help or advice.
dude same here , i tried flashing arrowOS and pixel EXperience but no OS installed shown ..i think its because TWRP doesn't support on android 10 cause on TWRP you can't change the option "mount system as read". this one is the first problem and there are so many else...
i tried many options, flashing new TWRP as well but RIP.
Yeah, i found it out too. Ive flashed stock through odin and this works fine. Now will search for the right recovery. Maybe somebody leave link here
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
NegilisticBluesman said:
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
Click to expand...
Click to collapse
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
luke martinez said:
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
Click to expand...
Click to collapse
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
NegilisticBluesman said:
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
Click to expand...
Click to collapse
hey man, its again giving me download error :crying::crying:can you give me another download link to TWRP for Andriod 10?? Thanks
btw system partition type for GSi rom - A or A/B ??:fingers-crossed:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
NegilisticBluesman said:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
Click to expand...
Click to collapse
sorry i don't know russian..can you please upload that TWRP to google drive or any other site
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
luke martinez said:
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
Click to expand...
Click to collapse
if u still need here is completly working twrp for samsung a30: https://drive.google.com/file/d/1fnXYqD_lyogDbjx9MnJ51cM2PmMoImc4/view?usp=sharing:highfive: