Related
First ....THANKS @letama, and last but not least thanks to @tRAcE3k for .ext4 build.
Official Stock Firmware v3.2.79 => ROOT, Update : Su binary v3.0.3.2, Superuser v3.0.7 and busybox v1.19.3, Add : enables vibrator and adjust volume !
(There is no need to install busybox.apk or busybox installer.apk from market, busybox is already installed into /system/xbin/ - only for .ext4)
This ROM is only for SDE enable ( recovery) ....you can use it as a daily ROM...
These are the files you need :
- zImage => http://www.4shared.com/file/KXp8bLDa/zImage.html
- initramfs.cpio.gz => http://www.4shared.com/archive/6Y9sMqJ5/initramfscpio.html
- archos_3.2.79.squashfs => http://www.4shared.com/zip/-vo5gkRr/firmware_3279squashfs.html (...version without busybox and update!)
- archos_3.2.79.ext4 => http://www.4shared.com/zip/dmrcBtJM/3279_updat.html
How install this :
- connect device via USB cable
- adb push archos_3.2.79.squashfs data/media/ ........for read-only /system
- adb push archos_3.2.79.ext4 data/media/..............for read-write /system and other stuff
- reboot into recovery , Recovery System-> Developer Edition Menu -> Remove Kernel ( for boot only to SDE) -> I Understand -> Ok -> Developer Edition Menu -> Flash Kernel and Initramfs -> copy zImage and initramfs into new driver -> Ok ! that's all
hi, If I have your archos_3.2.78.ext4, can I copy only archos_3.2.79.ext4 to data/media? Or for every new rom is always necessary copy even zImage and initramfs.cpio.gz? thank you
hitman72 said:
hi, If I have your archos_3.2.78.ext4, can I copy only archos_3.2.79.ext4 to data/media? Or for every new rom is always necessary copy even zImage and initramfs.cpio.gz? thank you
Click to expand...
Click to collapse
No, you have to flash zImage and initramfs.cpio.gz in sde developer menu each time. First, filename changed and it's hardcoded in initramfs, second, Archos bugfixes are also in the kernel so new zImage is required.
Thanks surdu_petru for taking the relay!
letama said:
No, you have to flash zImage and initramfs.cpio.gz in sde developer menu each time. First, filename changed and it's hardcoded in initramfs, second, Archos bugfixes are also in the kernel so new zImage is required.
Thanks surdu_petru for taking the relay!
Click to expand...
Click to collapse
old firmware (3.2.77 etc) must be removed manually from device?
ext link is invalid "......". ciao ;-)
gegabit said:
old firmware (3.2.77 etc) must be removed manually from device?
Click to expand...
Click to collapse
When everything works, yes, you can remove the previous .ext4 from internal storage. That's the only thing you have to remove.
hitman72 said:
ext link is invalid "......". ciao ;-)
Click to expand...
Click to collapse
now its upload to share.
- archos_3.2.79.ext4 => /.......future upload ..... it's 512Mb ext4...........
Click to expand...
Click to collapse
Hi Folks.
Thought I'd do my bit. Here are some more sources to download the ext4 firmware.zip
http://www.multiupload.com/0OTX0D54XW
Thanks to surdu_petru for the original image and tRAcE3k for the repacking instructions in this post.
Thanks
Trev
hitman72 said:
hi, If I have your archos_3.2.78.ext4, can I copy only archos_3.2.79.ext4 to data/media? Or for every new rom is always necessary copy even zImage and initramfs.cpio.gz? thank you
Click to expand...
Click to collapse
[email protected] sure is right....on the ather hand, every new firmware ( ex. firmware_archos_it4.aos) has its own boot image ( boot.img = zImage + initramfs) -used to boot devices and has its own flash files / system files which are grouped in an archive ( contains - libraries, aplikations, and other stuff ) - used to run system android , and all these are closely linked ....I think you can now better understand how to use them, and why ......
hitman72 said:
ext link is invalid "......". ciao ;-)
Click to expand...
Click to collapse
Ok...Now is valid link : http://www.4shared.com/zip/bp7XjWzY/archos_3279ext4.html....
Good luck!
Downloaded the ext4 version and couldn't get it to work.
Only root through the ADB Shell functioned, anything else Superuser automatically got denied, even though in the Superuser app it was set to prompt.
Chmodded the su binary to 6755 and it started to work
droobey said:
Downloaded the ext4 version and couldn't get it to work.
Only root through the ADB Shell functioned, anything else Superuser automatically got denied, even though in the Superuser app it was set to prompt.
Chmodded the su binary to 6755 and it started to work
Click to expand...
Click to collapse
Ok! Now just upload new update .....
First off Thanks very much surdu_petru for the work!
Please excuse my novice ability here, but...
I'm not sure if I did everything correctly, but I don't have root anymore. (i did with 3.2.78)
I did the adb push of the archos_3.2.79 to /data/media
then did the flash of intramfs and zImage from the beginning of this post.
I rebooted into developer and Root Checker says i don't have Root anymore?
Do i need to chmod the SU binary now to fix? if so where is the SU binary located in the filesystem? (i'm not sure how i would execute that command, via adb?)
revere521 said:
First off Thanks very much surdu_petru for the work!
Please excuse my novice ability here, but...
I'm not sure if I did everything correctly, but I don't have root anymore. (i did with 3.2.78)
I did the adb push of the archos_3.2.79 to /data/media
then did the flash of intramfs and zImage from the beginning of this post.
I rebooted into developer and Root Checker says i don't have Root anymore?
Do i need to chmod the SU binary now to fix? if so where is the SU binary located in the filesystem? (i'm not sure how i would execute that command, via adb?)
Click to expand...
Click to collapse
OK! Try >adb shell chmod 6755 system/bin/su
Thanks!
I ran adb shell chmod 6755 system/bin/su, the rebooted into developer again.
In file explorer, SU is listed as Readable:Yes Writable:no and hidden:no
Root Checker Basic still says i don't have proper root access, titanium backup and busybox show denied in the log.
I broke it lol, maybe i need to try again from the beginning.
revere521 said:
Thanks!
I ran adb shell chmod 6755 system/bin/su, the rebooted into developer again.
In file explorer, SU is listed as Readable:Yes Writable:no and hidden:no
Root Checker Basic still says i don't have proper root access, titanium backup and busybox show denied in the log.
I broke it lol, maybe i need to try again from the beginning.
Click to expand...
Click to collapse
same problem here the chmod doesn't solve it.
Eacy root command runed gets a deny from superuser even when tel superuser to allow everything
revere521 said:
Thanks!
I ran adb shell chmod 6755 system/bin/su, the rebooted into developer again.
In file explorer, SU is listed as Readable:Yes Writable:no and hidden:no
Root Checker Basic still says i don't have proper root access, titanium backup and busybox show denied in the log.
I broke it lol, maybe i need to try again from the beginning.
Click to expand...
Click to collapse
.....after install all....try to update Superuser into Market......
Update doesn't help :-(
surdu_petru said:
.....after install all....try to update Superuser into Market......
Click to expand...
Click to collapse
Update doesn't help :-(
tryed the update fix of superuser also
Update of the su binarie failde at md5sum check
basd82 said:
Update doesn't help :-(
tryed the update fix of superuser also
Update of the su binarie failde at md5sum check
Click to expand...
Click to collapse
OK I know.....just wait max 1 hour and I'll uploaded the new archos_3.2.79 files...with it everything works perfectly ( I have tested all , root_explorer, es file explorer, Root Check ....it's OK !!!!!).
basd82 said:
same problem here the chmod doesn't solve it.
Eacy root command runed gets a deny from superuser even when tel superuser to allow everything
Click to expand...
Click to collapse
ok! but now problem was solved.....just redownload the new firmware_3.2.79 files , unpack and enjoy*
Nexus S & Galaxy Nexus one click root toolkit ! Unlock bootloader+CWM+Su(or)SuperSu
This tool will root you nexus s/Galaxy Nexus install su or super su and ClockWorkMod recovery!!
For Nexus S:4G,I9020T,I9023,I9020A.
Galaxy Nexus:GSM/Verizon/Sprint
Disclaimer!
Your warranty is now void.
I am not responsible for bricked or damaged devices
YOU are choosing to make these modifications.
Click to expand...
Click to collapse
DOWNLOAD
Click to expand...
Click to collapse
Current Version (Nexus S + Galaxy Nexus) 3.5: http://d-h.st/qaL
MIRROR:http://www.mediafire.com/download.php?1if2rvgpcte2rcs
Old versions:
3.0: http://d-h.st/mhO
2.0: http://dev-host.org/gcZ (nexus s only)
1.0: http://dev-host.org/bEE (nexus s only)
HOW-TO
Click to expand...
Click to collapse
just unzip the content and run the tool ! drivers are included in case you need them.
incase you had any problems try rerunning the tool,and if you got superuser/supersu app but you are unable to use root apps,update superuser/supersu from the play store then update the binary from inside the app.
CHANGELOG
Click to expand...
Click to collapse
V3.5
-added support for jelly bean
-few script optimization
-updated superuser and supersu
V3.0
-added support to galaxy nexus and all it's variants.
-added support to install super su.
-moved from *.bat to *.exe
-new icon
-su/super su, will now automatically flash no need to touch "install zip"
-skip bootloader unlock if you are already unlocked.
-update drivers
V2.0
-Removed "sticky.bat"
-modified su flashing script.
-the recovery now will stick automatically no need to flash any file after rooting or running any script.
V1.0
-initial release
ALL DATA WILL BE WIPED FROM DEVICE(only if bootloader is locked)
credits
-Chainfire for super su
-ChainsDD for superuser
-Pdanet for drivers
-Clockworkmod team for recovery
-my friend for the icon
am i going to loose everithing on USB storage ? or jjust sistem data ? i have to have a full rom right ?
raducux said:
am i going to loose everithing on USB storage ? or jjust sistem data ? i have to have a full rom right ?
Click to expand...
Click to collapse
if your bootloader is locked then yes you will loose everything on USB storage,if the bootloader is already unlocked you will not loose any data,you don't need to flash a rom after rooting the device as it will not wipe the system.
Hi, I installed the drivers on my computer and am currently running the run.bat file. It's saying my device is not found. I have USB Debugging on, and USB storage is on. Any ideas?
Sticky please
Can i replace CWR with newest img version?
PLEASE STICKY THIS THREAD ON TOP.
Romaniac said:
Hi, I installed the drivers on my computer and am currently running the run.bat file. It's saying my device is not found. I have USB Debugging on, and USB storage is on. Any ideas?
Click to expand...
Click to collapse
Turn off the usb storage,you just need usb debugging enabled if you turned on usb storage it will not work
stewie-droid said:
Can i replace CWR with newest img version?
PLEASE STICKY THIS THREAD ON TOP.
Click to expand...
Click to collapse
The tool includes the latest cwm img,but if you want to replace it with another one you can do,just make sure you rename it to same name of the img in the root tool folder,but make sure that the recovery you will use is compatible with the nexus s
After I execute run.bat the phone is rooted. I reboot using ClockWorkMod Recovery. Then, when I run sticky.bat and follow the instructions I get the following:
[email protected]:/ $ su
su
[email protected]:/ # rm /etc/installrecovery.sh
rm /etc/installrecovery.sh
rm failed for /etc/installrecovery.sh, No such file or directory
What should I be doing? Please help.
Ritwik7 said:
After I execute run.bat the phone is rooted. I reboot using ClockWorkMod Recovery. Then, when I run sticky.bat and follow the instructions I get the following:
[email protected]:/ $ su
su
[email protected]:/ # rm /etc/installrecovery.sh
rm /etc/installrecovery.sh
rm failed for /etc/installrecovery.sh, No such file or directory
What should I be doing? Please help.
Click to expand...
Click to collapse
The phone should booted normally when running the sticky.bat (On the home screen),there is nothing to worry about just Complete the instructions normally one of the two scripts will fail since the name of the file differ in gingerbread and ics,try this rm /etc/install-recovery.sh and continue the instruction it should work and clockworkmod recovery would stick.
Thanks for your reply. I used a FixRecovery.zip file from another thread and flashed it after executing run.bat again. Now I am able to boot into ClockWorkMod.
Ritwik7 said:
Thanks for your reply. I used a FixRecovery.zip file from another thread and flashed it after executing run.bat again. Now I am able to boot into ClockWorkMod.
Click to expand...
Click to collapse
My friend can you guide where i can find this .zip because i m facing the same problem.thank you in advance
Ok I got it to stick by using Root Explorer to mount it as read/write first then ran the sticky.bat. ICS is the rm /etc/install-recovery.sh command.
m.sabra said:
The phone should booted normally when running the sticky.bat (On the home screen),there is nothing to worry about just Complete the instructions normally one of the two scripts will fail since the name of the file differ in gingerbread and ics,try this rm /etc/install-recovery.sh and continue the instruction it should work and clockworkmod recovery would stick.
Click to expand...
Click to collapse
I tried this and when I want to do the sticky.bat, when I type the "rm /etc/install-recovery.sh" it sais rm failed for /etc/.., Read-only file system
I had the same problem with sticky.bat.
Once you 're done with run.bat and it reboots in cwm just flash fix-recovery.zip
http://forum.xda-developers.com/showthread.php?p=20432966&highlight=fix-recovery#post20432966
karx23 said:
I had the same problem with sticky.bat.
Once you 're done with run.bat and it reboots in cwm just flash fix-recovery.zip
http://forum.xda-developers.com/showthread.php?p=20432966&highlight=fix-recovery#post20432966
Click to expand...
Click to collapse
thanks ! added the link to the OP in case anyone had problems like this.
Argh, I seem to have successfully unrooted my Nexus S 9020t and had it rebooted back in, but while it was booting up again I accidentally pressed a button and it told me "error: device not found" twice followed by "<waiting for device>".
Unfortunately my phone has already been rebooted, but it still seems to be waiting for my device. I'm not sure if I can disconnect this device from USB while this is going on, so uh, what do I do?
Edit: Disconnected and reconnected the USB cable on the phone to see what would happen, and it seems to be ok. I'm still stuck on "waiting for device" though. Should I consider restarting the process again?
Edit Edit: Decided to just try to redo the process all over again...seems to have worked!
Updated tool to version 2.0 ! check the changelog in OP, it should solve all sticky recovery related problems,as i removed sticky.bat and now the recovery will stick automatically without the need of running any commands or flashing any fixes.
thanks for reporting problems and feedbacks
thank you for this
Okay, I've tried to run this but it always fails at flashing the recovery.. Any help?
Lelouche said:
Okay, I've tried to run this but it always fails at flashing the recovery.. Any help?
Click to expand...
Click to collapse
Ok first have you unlocked your bootloader when the tool asked you to use volume buttons to chose yes and unlock ? (If you did this you should see an unlocked lock under google logo when booting the phone) if you didn't just run the script again and unlock the bootloader.
Are the drivers installed properly ? When you connect the phone to the pc check device manager to see if the PC recognizes the phone (the drivers are included in the tool in case you need them .
And last check the root tool folder on your pc it should have a file called cwm.img if it doesn't then download the tool again.
SuperUser is not visible after the process
I am on stock ICS, I had previously unlocked the bootloader, then I did the whole process mentioned in this thread. It showed me the CWM menu but when I did the reboot, I couldn't find the superuser app. Then to test whether it is rooted or not, I installed titanium backup but it says the device isnt rooted. What to do now? I tried SuperOneClick but it doesn't seem to work.
Edit: Thanks guys, sorry. It was my mistake, I didnt do the whole process in a right way. It is working as expected.
basically I wiped my phone accidentally so i have no OS, i can access TRWP recovery and i tried to sideload adb following this video
https://www.youtube.com/watch?v=xWmnHwkDrKk
although when i enter "adb usb" i get the msg "error: closed"
i am totally stuck here.... help is very much appreciated!
Lanky09 said:
basically I wiped my phone accidentally so i have no OS, i can access TRWP recovery and i tried to sideload adb following this video
https://www.youtube.com/watch?v=xWmnHwkDrKk
although when i enter "adb usb" i get the msg "error: closed"
i am totally stuck here.... help is very much appreciated!
Click to expand...
Click to collapse
you have the rom.zip in the same folder as adb / fastboot, and the phone is in the home screen of TWRP
try adb push rom.zip /sdcard
wait for it to copy then install it from twrp
clsA said:
you have the rom.zip in the same folder as adb / fastboot, and the phone is in the home screen of TWRP
try adb push rom.zip /sdcard
wait for it to copy then install it from twrp
Click to expand...
Click to collapse
thanks for the reply.
i just tried that and get the msg "error: closed"
Lanky09 said:
thanks for the reply.
i just tried that and get the msg "error: closed"
Click to expand...
Click to collapse
update your adb
http://forum.xda-developers.com/showthread.php?t=2588979
clsA said:
update your adb
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
i installed "fastboot_adb(1.0.32)_071114_r21"
but when i type adb version it says 1.0.31
now after usb device it does have s/n and sideload, before it said host
if i try push a .zip it still says error: closed
what directory does the cmd.exe need to be in?
Lanky09 said:
i installed "fastboot_adb(1.0.32)_071114_r21"
but when i type adb version it says 1.0.31
now after usb device it does have s/n and sideload, before it said host
if i try push a .zip it still says error: closed
what directory does the cmd.exe need to be in?
Click to expand...
Click to collapse
from the same dir as adb / fastboot
right click + shift / command prompt here
clsA said:
from the same dir as adb / fastboot
right click + shift / command prompt here
Click to expand...
Click to collapse
alright i managed to sideload a ROM but when I flash i get this error
"assert failed: getprop("ro.product.device") ==getprop("ro.build.product") == "m7"
E: Error executing updater binary in zip '/data/
Lanky09 said:
alright i managed to sideload a ROM but when I flash i get this error
"assert failed: getprop("ro.product.device") ==getprop("ro.build.product") == "m7"
E: Error executing updater binary in zip '/data/
Click to expand...
Click to collapse
that sounds like an OTA update error
what file are you trying to sideload / install ?
clsA said:
that sounds like an OTA update error
what file are you trying to sideload / install ?
Click to expand...
Click to collapse
the rom zip file of this http://forum.xda-developers.com/showthread.php?t=2514595&highlight=assert
Lanky09 said:
the rom zip file of this http://forum.xda-developers.com/showthread.php?t=2514595&highlight=assert
Click to expand...
Click to collapse
that explains it
Flashing Procedure:
1)Download TWRP 2.6.3.0 from here
Click to expand...
Click to collapse
I have bootloader unlocked
I am NOT Rooted
Flashing cust, boot and recovery work but system.img always fails as "remote: command not allowed"
I was told you dont have to be rooted to flash things with fastboot, Acassa's system was corrupted, and I downloaded the other one another person in the thread suggested that worked for others, but the same problem persists and I dont know what to do?
Your help would be much appreciated
danielproenca said:
I have bootloader unlocked
I am NOT Rooted
Flashing cust, boot and recovery work but system.img always fails as "remote: command not allowed"
I was told you dont have to be rooted to flash things with fastboot, Acassa's system was corrupted, and I downloaded the other one another person in the thread suggested that worked for others, but the same problem persists and I dont know what to do?
Your help would be much appreciated
Click to expand...
Click to collapse
Is Your Bootloader Unlocked ??
andromodgod said:
Is Your Bootloader Unlocked ??
Click to expand...
Click to collapse
Yes it is, I said so at the beginning of the post, sorry if I was unclear, It is definitely unlocked
I can flash cust, boot and recovery with no problem
danielproenca said:
Yes it is, I said so at the beginning of the post, sorry if I was unclear, It is definitely unlocked
I can flash cust, boot and recovery with no problem
Click to expand...
Click to collapse
most probably error with the system.img ..... this is lollipop .... we dont know wat kind of modifications huawei did under the hood .... best way is rollback to b609 and upgrade to b805 naturally
There is a file in /system named"set_immutable. list",delete it and try again.
chencu said:
There is a file in /system named"set_immutable. list",delete it and try again.
Click to expand...
Click to collapse
How do I delete it???
danielproenca said:
How do I delete it???
Click to expand...
Click to collapse
Have you rooted your phone?If you have,you can download a "Thermanl Emulator" and try:
First,to get Root access, you should input"su" and then press Enter.Next,"cd /system" and then "chattr -R -i *".Finally,"rm set_immutable. list".
Enjoy.Hope things work out.
---------- Post added at 02:01 PM ---------- Previous post was at 01:17 PM ----------
danielproenca said:
How do I delete it???
Click to expand...
Click to collapse
Oh,no.Before you "chattr",you should also "mount -o remount,rw /system".
You can use adb shell instead of "Thermal Emulator" as well.
chencu said:
Have you rooted your phone?If you have,you can download a "Thermanl Emulator" and try:
First,to get Root access, you should input"su" and then press Enter.Next,"cd /system" and then "chattr -R -i *".Finally,"rm set_immutable. list".
Enjoy.Hope things work out.
---------- Post added at 02:01 PM ---------- Previous post was at 01:17 PM ----------
Oh,no.Before you "chattr",you should also "mount -o remount,rw /system".
You can use adb shell instead of "Thermal Emulator" as well.
Click to expand...
Click to collapse
Can you give me a full tutorial as my phone is NOT ROOTED
danielproenca said:
Can you give me a full tutorial as my phone is NOT ROOTED
Click to expand...
Click to collapse
Could you root your device?Since you unlocked your device, you can flash a third-party recovery and flash the SuperSU zip.
chencu said:
Could you root your device?Since you unlocked your device, you can flash a third-party recovery and flash the SuperSU zip.
Click to expand...
Click to collapse
It doesnt connect to HiSuite
I dont know how to do any of that?
Root
@danielproenca
1 ) Install ADB and Fastboot drivers in ya pc from Link to Google Drive
2 ) Then Download CWM Img file Mega Link
3 ) Place The Img on Ur desktop
4 ) Open CMD and Connect Phone in MTP Mode with Debugging On .
5 ) Write The Following Command
adb reboot bootloader
Click to expand...
Click to collapse
6 ) Then Write ....
fastboot flash recovery C:\Users\Ur_UserName\Desktop\cwm.img
Click to expand...
Click to collapse
7 ) Press ENTER and Ur Done
8 ) Write
Fastboot reboot
Click to expand...
Click to collapse
and u will reboot into ur OS
9 ) Download Super SU Update Package Link to Mega
10 ) Copy it To Your Phone and Type This Command on Your PC
adb reboot recovery
Click to expand...
Click to collapse
11 ) From Recovery Just Flash The Super su package and u will be rooted
andromodgod said:
@danielproenca
1 ) Install ADB and Fastboot drivers in ya pc from Link to Google Drive
2 ) Then Download CWM Img file Mega Link
3 ) Place The Img on Ur desktop
4 ) Open CMD and Connect Phone in MTP Mode with Debugging On .
5 ) Write The Following Command
6 ) Then Write ....
7 ) Press ENTER and Ur Done
8 ) Write and u will reboot into ur OS
9 ) Download Super SU Update Package Link to Mega
10 ) Copy it To Your Phone and Type This Command on Your PC
11 ) From Recovery Just Flash The Super su package and u will be rooted
Click to expand...
Click to collapse
Thanks very much, will try it now
andromodgod said:
@danielproenca
1 ) Install ADB and Fastboot drivers in ya pc from Link to Google Drive
2 ) Then Download CWM Img file Mega Link
3 ) Place The Img on Ur desktop
4 ) Open CMD and Connect Phone in MTP Mode with Debugging On .
5 ) Write The Following Command
6 ) Then Write ....
7 ) Press ENTER and Ur Done
8 ) Write and u will reboot into ur OS
9 ) Download Super SU Update Package Link to Mega
10 ) Copy it To Your Phone and Type This Command on Your PC
11 ) From Recovery Just Flash The Super su package and u will be rooted
Click to expand...
Click to collapse
Where do I place the supersu on my phone and do I unzip it or leave it zipped?
andromodgod said:
@danielproenca
1 ) Install ADB and Fastboot drivers in ya pc from Link to Google Drive
2 ) Then Download CWM Img file Mega Link
3 ) Place The Img on Ur desktop
4 ) Open CMD and Connect Phone in MTP Mode with Debugging On .
5 ) Write The Following Command
6 ) Then Write ....
7 ) Press ENTER and Ur Done
8 ) Write and u will reboot into ur OS
9 ) Download Super SU Update Package Link to Mega
10 ) Copy it To Your Phone and Type This Command on Your PC
11 ) From Recovery Just Flash The Super su package and u will be rooted
Click to expand...
Click to collapse
I am not running any custom ROM, I am NOT ROOTED and when booted into recovery, I dont get any option to flash??
Forget everthing i said ......
As This is Your First Time i Recommend TWRP ......
So First Download TWRP img from Mega Link Credits to @Araca
keep it on your desktop .....
now connect your device to Computer with USB Debugging enabled and in mtp mode
now first copy this command into notepad and edit it
fastboot flash recovery C:\Users\Username\Desktop\TWRP-2.8.7.0.img
Click to expand...
Click to collapse
in the command above replace Username with your own username .......
after that type
Fastboot reboot
Click to expand...
Click to collapse
Then Copy the super su zip file into internal sdcard ...... internal storage ....... not external not sdcard !!!!
and dont extract the zip file
then type the following command
adb reboot recovery
Click to expand...
Click to collapse
when recovery it will ask about setting system as read only ..... on the bottom of screen there is a an option to swipe .... swipe it and dont check anything else ....
after that click on install and then a list will come of your internal storage ...... just swipe and go down there will be super su update package click on it and then swipe to flash ..... then reboot back to system and if it come to fix root then just swipe and your done ....... now im gonna go shower so ill be back after some time just try it and i hope it works for ya
after or before doing all that just read thisLink to something fishy fishy
andromodgod said:
@danielproenca
1 ) Install ADB and Fastboot drivers in ya pc from Link to Google Drive
2 ) Then Download CWM Img file Mega Link
3 ) Place The Img on Ur desktop
4 ) Open CMD and Connect Phone in MTP Mode with Debugging On .
5 ) Write The Following Command
6 ) Then Write ....
7 ) Press ENTER and Ur Done
8 ) Write and u will reboot into ur OS
9 ) Download Super SU Update Package Link to Mega
10 ) Copy it To Your Phone and Type This Command on Your PC
11 ) From Recovery Just Flash The Super su package and u will be rooted
Click to expand...
Click to collapse
THank you so much!!!!
OK now I have done all of that, how do I go back to B609 without any MyRoMs or that kind of thing?
Please tell me how you unblocked your bootloader?
freedompals said:
Please tell me how you unblocked your bootloader?
Click to expand...
Click to collapse
http://emui.huawei.com/en/plugin.php?id=unlock&mod=unlock&action=apply
this method doesn't work
Rooting Guide for Beginners
Before you begin:
- This guide is only meant for Windows!
If you have a MAC, then use this guide.
-To obtain root on b609, follow this guide.
-Make sure you have your drivers installed!
If not then download hisuite.
- Some people have reported that they are unable to obtain the unlocking code, only getting a server busy message. It can be fixed by setting the webpage's
language to Chinese!
How to root?
1. Request for your bootloader code.
- (if you are registering a new account choose to register with email and when you register your account for the first time, it will redirect you to the main page, from there select "download" on the website and from there select "unlock bootloader")
2. Download Minimal ADB and Fastboot.
3. Enable USB debugging.
- (Activate developer mode by going to your settings, about phone, then tap on the build number until it says you are a developer) .
4. Connect your phone to your computer.
5. Install Minimal ADB and Fastboot, complete the setup and when it asks to create a desktop icon then accept.
6. Open Minimal ADB and Fastboot and then type: adb reboot bootloader
- (don't be frightened if you see a red text saying your phone is locked)
7. Then type: fastboot oem unlock xxxxxxxxxxxx
- (replace the x with your code)
8. Download TWRP Recovery.
9. Copy twrp_p7-3.0.0-0.img to the Minimal ADB and Fastboot folder.
10. After placing TWRP to the folder, type into the Command Window: fastboot flash recovery twrp_p7-3.0.0-0.img
11. Now type into the Command Window: fastboot reboot
12. Download SuperSU and place the zip to your phone.
13. Now type into the Command Window: adb reboot recovery
14. Flash supersu.zip in the recovery.
15. Reboot your phone.
16. Install "Root Browser" from PlayStore and delete the setimmutable.list in /root/system/
Now you should have a fully rooted phone!
Download UPDATE-SuperSU-v2.65-20151226141550.zip
Copyright © 2011-2016 - Chainfire
https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
Maxi_69 said:
Download UPDATE-SuperSU-v2.65-20151226141550.zip
Copyright © 2011-2016 - Chainfire
https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
Click to expand...
Click to collapse
Thank you, I have updated the download link!
Hello!
You wrote "( replace the x with your code) "
Where i can find my "code"?
Many thanks!
Ment0r said:
Hello!
You wrote "( replace the x with your code) "
Where i can find my "code"?
Many thanks!
Click to expand...
Click to collapse
point n° 1
Oooooh...
*facepalm*
Many thanks
how do we remove twrp from the phone
please help
thanks
kgurm said:
how do we remove twrp from the phone
please help
thanks
Click to expand...
Click to collapse
Flash your stock recovery via adb or download flashify from the playstore and flash with that.
I get error when entering adb reboot bootloader. Should I navigate to some location when I open Minimal ADB and fastboot?
The error is: adb server is out of date. killing
adb server didnt ACK
*failed to start daemon*
error: unknown host service
Thank you it works like a charm
why delete 'delete the setimmutable.list in /ROOT/SYSTEM/' ?
Stike999 said:
I get error when entering adb reboot bootloader. Should I navigate to some location when I open Minimal ADB and fastboot?
The error is: adb server is out of date. killing
adb server didnt ACK
*failed to start daemon*
error: unknown host service
Click to expand...
Click to collapse
Yes, just open the desktop icon.
迅捷斥候 said:
Thank you it works like a charm
why delete 'delete the setimmutable.list in /ROOT/SYSTEM/' ?
Click to expand...
Click to collapse
You have to delete it because it doesn't allow editing of certain system files and because of that you can't have full root on your system until you remove it.
TheSproker said:
You have to delete it because it doesn't allow editing of certain system files and because of that you can't have full root on your system until you remove it.
Click to expand...
Click to collapse
Ok thanks
adb sideload
im trying to sideload firmware it always fails. do you have a ROM that will work.
thanks
TheSproker said:
I have seen may people asking how to root their phones, so I decided to make a guide and save You from the hassle of going through many different forums. This guide should work on any version of firmware and model of Huawei p7.
Before doing this make sure you have your drivers installed!
If not then download hisuite: http://consumer.huawei.com/minisite/HiSuite_en/
So, let's begin with the rooting! :
1. Request for your bootloader code: https://hwid5.vmall.com/oauth2/porta...in/login.php (if you are registering a new account choose to register with email)
2. Download Minimal ADB and Fastboot. http://forum.xda-developers.com/show....php?t=2317790
3. Enable USB debugging in your phone in the developer menu.
-(Enable developer mode by going to your settings, about phone, then tap on the build number until it says you are a developer) .
4. Connect your phone to your computer.
5. Install Minimal ADB and Fastboot, complete the setup and when it asks to create a desktop icon then accept.
6. Open Minimal ADB and Fastboot then type: adb reboot bootloader
(don't be frightened if you see a red text saying your phone is locked)
7. Then type: fastboot oem unlock xxxxxxxxxxxx
( replace the x with your code)
8. Download TWRP Recovery:
http://www46.zippyshare.com/v/SlBf3dvC/file.html
9. Copy the twrp-3.0.0-0.img to the Minimal ADB and Fastboot folder.
10. After placing TWRP to the folder, type into the Command Window: fastboot flash recovery twrp-3.0.0-0.img
11. Now type into the Command Window: fastboot reboot
12. Download SuperSU: https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
(Copy the Supersu.zip to your phone)
13. Now type into the Command Window: adb reboot recovery
14. In TWRP recovery flash the supersu.zip on your phone.
15. Reboot your phone.
16. Install X-Plore File Manager from PlayStore and delete the setimmutable.list in /ROOT/SYSTEM/
Now you should have a fully rooted phone !
If you have any questions, or suggestions please feel free to post them!
Click to expand...
Click to collapse
Can this be also done on mac? and also the link for downloading adb is broke wat should i refer to?
fahad69 said:
Can this be also done on mac? and also the link for downloading adb is broke wat should i refer to?
Click to expand...
Click to collapse
ADB and Fastboot Installation on MAC
Download : Androidv5.zip
1. Download and extract the above zip file.
2. Place the extracted folder on the desktop.
3. Open up a new terminal window.
4. Enter “cd Desktop/Androidv5” and press enter.
5. Enter “./ADB-Install-Mac.sh” and press enter.
The script will automatically install both adb and fastboot
I can't delete setimmutable.list
I get a message saying that" some items could not be deleted"
What should I do? I've completed all the other steps
austinewuncler said:
I can't delete setimmutable.list
I get a message saying that" some items could not be deleted"
What should I do? I've completed all the other steps
Click to expand...
Click to collapse
I just fixed that problem. Here's what i did:
1) have your phone ROOTED
2) install BUSYBOX from PLAYSTORE
3) install terminal emulator from PLAYSTORE
4)open Terminal Emulator and type in the following commands exactly:
su
mount -o rw,remount /system
cd system
rm –f /system/set_immutable.list
Check with X-plore if the set_immutable.list file is removed. Worked for me.
SenGAndroid said:
I just fixed that problem. Here's what i did:
1) have your phone ROOTED
2) install BUSYBOX from PLAYSTORE
3) install terminal emulator from PLAYSTORE
4)open Terminal Emulator and type in the following commands exactly:
su
mount -o rw,remount /system
cd system
rm â??f /system/set_immutable.list
Check with X-plore if the set_immutable.list file is removed. Worked for me.
Click to expand...
Click to collapse
It worked. Thank you very much
austinewuncler said:
It worked. Thank you very much
Click to expand...
Click to collapse
Can some one share stock recovery for build number: p7-l10c900b852 ?
Just broke my phone.. cant go out from recovery.. plz help.