Did you now return from mi 6x (converted a2) to Android one? or the problem with ARB 4 has not yet been solved?
Man, i think this problem will not have solution... I'm on the same boat lol.
I found a workaround for this, i'm using Havoc 2.5 for Mi 6X (wayne) the best rom based on android One
afranioneto said:
Man, i think this problem will not have solution... I'm on the same boat lol.
I found a workaround for this, i'm using Havoc 2.5 for Mi 6X (wayne) the best rom based on android One
Click to expand...
Click to collapse
Actually it's possible to return
StarSix01 said:
Actually it's possible to return
Click to expand...
Click to collapse
Go back to Android One?? How bro? Can you send me the guide or help me?
If you have triggered ARB4, you can not go back to Android One (ARB2), you will brick your device.
blowtorch said:
If you have triggered ARB4, you can not go back to Android One (ARB2), you will brick your device.
Click to expand...
Click to collapse
Actually you can
---------- Post added at 03:13 AM ---------- Previous post was at 03:12 AM ----------
afranioneto said:
Go back to Android One?? How bro? Can you send me the guide or help me?
Click to expand...
Click to collapse
I dont know If i im allowed to send links here, so PM me
VikasTewatia said:
... Showed Black Screen at fastboot mode. No Logo only Clear Black Screen.
Click to expand...
Click to collapse
Tried reflashing "splash.img"?
Yep. When being unsure refer to commands declared in "flash_all*.bat" files of stock ROM distr
VikasTewatia said:
I'M Doing It Currently
Edit : I Wiped dalvik, cache, system, internal and data with help of TWRP ( for wayne v3.3.0.0), Then i Flashed TWRP for jasmine v3.3.0.0 and again formatted all. Then i reboot to Fastboot, then edl mode. I Used QPST and Downloaded Stock Pie 9, then as earlier, i got MI splash screen, then bootloader is unlocked message. then it shows Mi (unlocked at bottom) and shuts down. i powered it on in fastboot mode, same as earlier, no Screen but Black Lit. i flashed Splash.img from stock rom images folder. Now i again Launched fastboot mode and Now it Shows Android One Splash screen but didnt start again,then i went to normal Fastboot mode, it showed the logo. i reflashed the rom via MiFlash v2018 this Time and it took just 1 second, i Rebooted my Phone and its Back at STOCK!. Everythings Back. Wifi, bluetooth, Volte, torch, Camera EVERYTHING WORKS! Recovery is back too. Locked Bootloader thenafter, Says Phone could not load/start. Maybe the slot switched , had 2 options try again(which obviously Changes slot and try again) and Perform Factory reset. Works After Factory Reset.
Also, Anti Ver is 1 now.
i Will Create a Thread for Getting back to Stock Android after converting to 6X. may Help newbies and First Timers.
Click to expand...
Click to collapse
Hi bro! Are u triggered on ARB 4 or not?
VikasTewatia said:
Nopes I am On ARB 1 :laugh:
Click to expand...
Click to collapse
Yes, but I'm asking about before I can get back to the original system. Were you in ARB4 or ARB1?
VikasTewatia said:
i was at ARB 2 when i had the converted A2 ie, when i was running Miui 10 Pie
Click to expand...
Click to collapse
Hmmm, okay. Tks!
VikasTewatia said:
i was at ARB 2 when i had the converted A2 ie, when i was running Miui 10 Pie
Click to expand...
Click to collapse
The point is to back Android One when it is triggered to ARB 4. It is obviously possible to return Android One on ARB 2, no doubt.
VikasTewatia said:
I currently am on ARB 2 and i Have Successfully Installed Stock Android Pie V10.0.8.0.PDIMIXM. The Only Problem was i Couldnt Boot to Recovery and it Showed Black Screen at fastboot mode. No Logo only Clear Black Screen.
Click to expand...
Click to collapse
what you have to do to get the image of fastboot out again, is to flash the same Android stock rom, in fastboot. After flash you will get the image again. I hope it helps you
Please, you said you can go back to ARB2, tell me how.
VikasTewatia said:
I'M Doing It Currently
Edit : I Wiped dalvik, cache, system, internal and data with help of TWRP ( for wayne v3.3.0.0), Then i Flashed TWRP for jasmine v3.3.0.0 and again formatted all. Then i reboot to Fastboot, then edl mode. I Used QPST and Downloaded Stock Pie 9, then as earlier, i got MI splash screen, then bootloader is unlocked message. then it shows Mi (unlocked at bottom) and shuts down. i powered it on in fastboot mode, same as earlier, no Screen but Black Lit. i flashed Splash.img from stock rom images folder. Now i again Launched fastboot mode and Now it Shows Android One Splash screen but didnt start again,then i went to normal Fastboot mode, it showed the logo. i reflashed the rom via MiFlash v2018 this Time and it took just 1 second, i Rebooted my Phone and its Back at STOCK!. Everythings Back. Wifi, bluetooth, Volte, torch, Camera EVERYTHING WORKS! Recovery is back too. Locked Bootloader thenafter, Says Phone could not load/start. Maybe the slot switched , had 2 options try again(which obviously Changes slot and try again) and Perform Factory reset. Works After Factory Reset.
Also, Anti Ver is 1 now.
i Will Create a Thread for Getting back to Stock Android after converting to 6X. may Help newbies and First Timers.
Click to expand...
Click to collapse
Hey have you created the thread or any kind of tutorial?
I'd appreciate it if you could give me the link.
Marino_Barroso said:
Hey have you created the thread or any kind of tutorial?
I'd appreciate it if you could give me the link.
Click to expand...
Click to collapse
Here you go mate:
https://forum.xda-developers.com/mi-a2/how-to/guide-converting-mi-6x-to-mi-a2-t3936669
genti.b said:
Here you go mate:
https://forum.xda-developers.com/mi-a2/how-to/guide-converting-mi-6x-to-mi-a2-t3936669
Click to expand...
Click to collapse
Thanks
Marino_Barroso said:
Hey have you created the thread or any kind of tutorial?
I'd appreciate it if you could give me the link.
Click to expand...
Click to collapse
Your MI A2 is in ARB4 and you can back to ARB1, you kidding me?
Related
Bootloader = Oxygen
Bootloader = locked
USB Debug = off
Display = Black without panel light
Because of the screen can't enter the menu to unlock bootloader or install TWRP
Problem:
The phone worked before i flashed a firmware with Test Point method to remove a forgotten password. So, i flashed this firmware from http://en.miui.com/thread-844022-1-1.html and followed all the steps by removing the emmc_appsboot.mbn from the firmware with one from the MI Max 2. The problem is that after turn on the phone, i don't see anything, even the display panel has no light, is blank black, but if i wait few minutes after flashing, the phone boot in the setup menu and i hear the sounds. I can hear the sounds when charging and when phone boots up. Keep in mind that before flashing the rom when i tried to enter in fastboot or stock recovery, i didn't saw the fastboot logo or recovery menu. So, is there something wrong? Is there a file in the firmware that needs to be replaced with another one? A display firmware/driver missing? Can somebody upload a firmware for Oxygen bootloader and will all the instructions? Or is there any solution to unlock bootloader to install Twrp with a custom firmware? Any help is appreciated.
Dou you do this?
5. Run "writeselparts" application in "unbrick" folder and wait... This'll flash emmc_appsboot.mbn from Mi Max 2. When succeed, you'll get this message:...
I follow the same http://en.miui.com/thread-844022-1-1.html and everything is ok.
Hi, thanks for reply. Yes i did that. The phone boots up, i have sound but screen is black.
Any solutions?? i'm in the same situation..
NegreiAdrian said:
Bootloader = Oxygen
Bootloader = locked
USB Debug = off
Display = Black without panel light
Because of the screen can't enter the menu to unlock bootloader or install TWRP
Problem:
The phone worked before i flashed a firmware with Test Point method to remove a forgotten password. So, i flashed this firmware from thread-844022-1-1.html and followed all the steps by removing the emmc_appsboot.mbn from the firmware with one from the MI Max 2. The problem is that after turn on the phone, i don't see anything, even the display panel has no light, is blank black, but if i wait few minutes after flashing, the phone boot in the setup menu and i hear the sounds. I can hear the sounds when charging and when phone boots up. Keep in mind that before flashing the rom when i tried to enter in fastboot or stock recovery, i didn't saw the fastboot logo or recovery menu. So, is there something wrong? Is there a file in the firmware that needs to be replaced with another one? A display firmware/driver missing? Can somebody upload a firmware for Oxygen bootloader and will all the instructions? Or is there any solution to unlock bootloader to install Twrp with a custom firmware? Any help is appreciated.
Click to expand...
Click to collapse
Hey, which ROM were you using before the issue? Did your phone came with the oxygen bootloader, or you flashed it accidentally?
Hi guys! Who have official firmware for Mi 5X Oxygen? Maybe after flash official developer version screen will back?
DeeJay_145 said:
Hi guys! Who have official firmware for Mi 5X Oxygen? Maybe after flash official developer version screen will back?
Click to expand...
Click to collapse
That’s exactly what I was thinking (sort of). But instead of using their oxygen modified rom, I was hoping to find someone with a oxygen bootloader to do a entire partition backup (not just the ones that twrp allows) so I can inspect each one and check what else they changed to make it work. I still think that they change other partitions than the bootloader (emmc_appsboor)
matheusbittencourt said:
That’s exactly what I was thinking (sort of). But instead of using their oxygen modified rom, I was hoping to find someone with a oxygen bootloader to do a entire partition backup (not just the ones that twrp allows) so I can inspect each one and check what else they changed to make it work. I still think that they change other partitions than the bootloader (emmc_appsboor)
Click to expand...
Click to collapse
have you backup modified rom from oxygen device?
DeeJay_145 said:
have you backup modified rom from oxygen device?
Click to expand...
Click to collapse
No, I'm still trying to find someone that have the 5x with oxygen bootloader to dump the images.
i have one device same with your problem dont have any idea to fix
same problem for my mi phone too... how is not solved yet?!
untill now dont have any solution for it
yes i have black screen issues too... there is sounds when charging, and three buttons below showing lights, plug in to my computer and detected as Mi5X MTP in My Computer
any solution?
maybe someone has figured it out?
matheusbittencourt said:
Hey, which ROM were you using before the issue? Did your phone came with the oxygen bootloader, or you flashed it accidentally?
Click to expand...
Click to collapse
In my case, I was using a ROM MIUI.EU, when I updated via OTA, the phone was left with the black screen.
how did you fix the black screen?
i updated miui.eu via ota, i have black screen everywhere, including twrp and fastboot!! Never saw something like this!
5x with oxygen bootloader
matheusbittencourt said:
No, I'm still trying to find someone that have the 5x with oxygen bootloader to dump the images.
Click to expand...
Click to collapse
I have one.
nemo50 said:
I have one.
Click to expand...
Click to collapse
May i have your firmware sir?
same problem Did you find any solution?
Solution is: backup all your data with adb and scrcpy (hope you left adb enabled), then flash the latest China stable with MI flash. At that point flash latest xiaomi.eu stable
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
I had same problem, with MiFlash I put 9.6.10.0 and updated to 9.6.17.0
Pretty happy with this software, stable and everything works. Stay away from Pie, a lot of bugs.
Sent from my Mi A2 using Tapatalk
I had to factory reset
I had same problem. Any solution?
Odesláno z mého X52X pomocí Tapatalk
Cocagy said:
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
Click to expand...
Click to collapse
If you have unlocked bootloader try with fastboot file & Mi flash tool
http://en.miui.com/download-353.html
Read Method 2: Fastboot : http://en.miui.com/a-234.html
you have to go V9.6.16.0.ODIMIFE (Android O) & after if you want update to 9.6.17 etc...
Factory Reset can not do anything in this case
[Or try with edl mode... https://in.c.mi.com/thread-37902-1-0.html
https://forum.xda-developers.com/showpost.php?p=77327325&postcount=2 ] it is not easy but can be save the device
sry for english
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/xiaomi-mi-a2-android-9-pie-update-t3868101
see & here : https://forum.xda-developers.com/mi-a2/how-to
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
papavegan said:
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
Click to expand...
Click to collapse
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
salchi13 said:
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
Cocagy said:
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Click to expand...
Click to collapse
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
For me the problem seems to be related to magisk, once I restored the original boot.img, the phone boots. If I try to flash the magisk patched boot image, it returns to bootloop. I'm using magisk v18 btw. I'm unable to get root using magisk on this PIE version
salchi13 said:
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
Click to expand...
Click to collapse
You can use these commands on fastboot mode .. it should work then try to flash rom
fastboot flashing unlock
fastboot flashing unlock_critical
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
norbertpoland said:
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
Click to expand...
Click to collapse
If you are lucky, maybe you activated the photo and video backups and the videos/photos from your trips have been uploaded to https://photos.google.com from the different wifi hotspots that you may have connected to.
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Just to add that it happened at 1 of march probably after some actualization or something.
norbertpoland said:
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Click to expand...
Click to collapse
Had the same problem, in the end I decided to send it back for warranty repairs... and that fixed it of course, they probably had to open it to flash it in EDL mode, which I think you can do if you have the right screwdriver to open the phone.
https://www.youtube.com/watch?v=Uu7V0cBu41k
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
norbertpoland said:
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
Click to expand...
Click to collapse
If You are able to boot phone into bootloader (even with black screen, you can check with "fastboot devices" or looking for "Android Bootloader Interface" driver in Win DevManager), you can try this: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718 to boot phone into EDL without opening case. More than that, may be its worth trying even simple "fastboot oem edl" command),
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...
Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Someone else had the same problem as you on here.
Edit
Here is the link
https://forum.xda-developers.com/Mi-9/help/brick-help-t3930230/page2
Knubz1337 said:
I failed at flashing my mi 9 from android 10 beta back to stock after that my mi 9 won´t restart:
-no vibration
-no fastboot logo
-no recovery enter
+my pc cant detect my phone
any thoughts or ideas?
Click to expand...
Click to collapse
Miuiflashpro maybe? I managed to find an Italain version. Good luck mate?
What did you do? How can you "fail" to flash it?
SmallTarzan said:
What did you do? How can you "fail" to flash it?
Click to expand...
Click to collapse
Error too many links
Thargorsson said:
I suggest using a edl cable first if that fails I would probably go fro a refund claim if its totally unresponsive...
Click to expand...
Click to collapse
i ordered a xiaomi edl deep flash cable. I will try it tomorrow
Did you fix it? If so, how?
Knubz1337 said:
i ordered a xiaomi edl deep flash cable. I will try it tomorrow
Click to expand...
Click to collapse
edl without authorized account won't work....
Addymore said:
edl without authorized account won't work....
Click to expand...
Click to collapse
I couldn't enter edl Mode with the cable.
I think I will send It back
Same issue here.
I did the same thing. And it hard bricked my phone. I send it back, and they change the motherboard for me.
I have the same issue. Mine is mi9se. Managed to solve?
hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me
sd brasil said:
hi, I unlocked the bootloader, did the twrp, did the root and, when installing the pixel rom, it crashed on FASTBOOT and didn't come out anymore, help me
Click to expand...
Click to collapse
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?
Oel said:
You didn't flash the last firmware.zip before flashing pixel, or a full miui rom?
On pc, no sign of life in fastboot?
Click to expand...
Click to collapse
Sim fiz tudo... Mesmo assim entrou em unbrick...
Consegui com o miflash PRO voltar a rom original
Hi guys!
May I know if anybody here experienced black screen ? Screen has no image to display. Backlight is working, Led light is working when charging, fingerprint vibrates as well when A2 is turned on. I have tried replacing LCD display but black screen persists. What do you think is the problem?
Sent from my Mi 9 SE using Tapatalk
I have the same problem!!!! I try flash rom again but it persists
Yesterday it happened to me also.
The phone is working, the touch is working, but the lcd is black.
I even managed to recieve a call. Tried to restart the phone but its still black screen with working touch.
I can't find any solution...
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
RiFeee said:
Anybody found a solution??
My MI A2 is in black screen after updated to Wayne V11.0.6.0.PDCCNXM 20200509.
Tried to flash again, the screen didn't even turned on anymore, then used an UNBRICK WAYNE XIAOMI MI6X and it's back to black screen, been like this for 4 days now, should I start looking for a new phone? :crying:
Serial number: 23e3c4ee
Codename: wayne
Bootloader: locked
Anti version: 4
ROM: Wayne V11.0.6.0.PDCCNXM 20200509.
When I flash the ROM again, takes 100, 200 seconds only, and didn't change anything.
Click to expand...
Click to collapse
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
KevMetal said:
stop stressing . you have ARB4 so just flash a custom rom ...or flash only the LASTEST STOCK ROM ...you didn't listen and tried to flash another think ...so your phone went to hardbrick edl mode
your phone is fine it is just in a timeout edl mode
the only way to fully rescue it is by physically forcing testpoint then flashing LATEST FASTBOOT STOCK ...this time listen or stay on black screen
Click to expand...
Click to collapse
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
RiFeee said:
Already did it and gets worse, if I flash the latest fastboot Stock ROM really becomes a brick, to de point of not even the screen turns on and stay on edl mode forever.
Click to expand...
Click to collapse
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
KevMetal said:
because you are trying to downgrade
Click to expand...
Click to collapse
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
RiFeee said:
Already tried to downgrade, upgrade, change the type of rom, original, custom, and nothing worked
Click to expand...
Click to collapse
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
KevMetal said:
because you are trying to downgrade
what you need to do is flash the LATEST chinese fastboot stock rom of Wayne or it will never work
you need to flash it with edl and miflash ( LATEST BETA)
you keep on thinking you can flash any stock rom but you can't ......
if you try to flash any stock rom older than the last stock rom you flashed it will never boot and keep going back to edl blackscreen
if you DON'T open your phonr and short the test point miflash will timeout or give errors and device wont boot
open your phone with screwdriver and flash the VERY latest chinese fastboot rom with latest miflash beta
Click to expand...
Click to collapse
KevMetal said:
that is your problem ...you think you can get out of this without paying the price ..you cant
do what I told you ...in the posts before
Click to expand...
Click to collapse
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
RiFeee said:
What a heck are you talking about?
Already did everything with Mi flash, forced edl mode by point test, saw like 300 tutorials, for Mi A2, Mi 6x.
What I needed was a verified Mi account to unlock and flash with no problems
Click to expand...
Click to collapse
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
KevMetal said:
well if you had followed any of mine or listened carefully to what I'm telling you , your device would have booted already ... but continue in the same manner since you think my help is gibberish .
you don't need an account to flash your device ...
Click to expand...
Click to collapse
I already did, tried all the tutorials from 2018 to last month. The phone bootloader is locked and for some reason I can't unlock it, tried a dozen of different approaches, recovery's, flashings, ADB and everything.
Always ends in two ways, black screen with back light on (some sounds work and keeps in the lock login screen) or dead stuck in permanent EDL mode.
My phone still not working. Maybe its because of the busted display IC.
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already