Hi everyone , I have Note 8 ( SM-N950F ) CSC : VAU ( Vodafone Australia ) UNLOCKED
i didn't wait to receive "ANDROID PIE 9" update , So I used Odin and Flashed the " Update for EGYPT - CSC : EGY "
and when Vodafone Australia Released the update i flashed the update for my original CSC : VAU and choosed CSC FILE not home-csc
when i went to recovery mode i found this error :
And my Brother's Phone too " S8+ SM-G955F CSC : XSA " Australia "
Both Phones :
Jeremiah Essam said:
Hi everyone , I have Note 8 ( SM-N950F ) CSC : VAU ( Vodafone Australia ) UNLOCKED
i didn't wait to receive "ANDROID PIE 9" update , So I used Odin and Flashed the " Update for EGYPT - CSC : EGY "
and when Vodafone Australia Released the update i flashed the update for my original CSC : VAU and choosed CSC FILE not home-csc
when i went to recovery mode i found this error :
And my Brother's Phone too " S8+ SM-G955F CSC : XSA " Australia "
Both Phones :
Click to expand...
Click to collapse
I get the same error but I have no issues with the phone.
I'm running the INS firmware with the original csc XEU.
I wouldn't be worried about it unless it's giving you problems.
If you want to go back to your original csc firmware later on you can check to see if the error is there or not.
The reason behind that is probably because you install the update over the original OS on your device. Back up your data and perform a Hard Factory reset but wipe the Cache Partition and everything should be fine.
BluePhnx said:
I get the same error but I have no issues with the phone.
I'm running the INS firmware with the original csc XEU.
I wouldn't be worried about it unless it's giving you problems.
If you want to go back to your original csc firmware later on you can check to see if the error is there or not.
Click to expand...
Click to collapse
I flashed the update for my original CSC
and wiped cache & data
the problem is still there too
iceepyon said:
The reason behind that is probably because you install the update over the original OS on your device. Back up your data and perform a Hard Factory reset but wipe the Cache Partition and everything should be fine.
Click to expand...
Click to collapse
I flashed the update for my original CSC
and wiped cache & data
the problem is still there too
Jeremiah Essam said:
I flashed the update for my original CSC
and wiped cache & data
the problem is still there too
Click to expand...
Click to collapse
Have any issues with phone?
Because of this error in recovery?
BluePhnx said:
Have any issues with phone?
Because of this error in recovery?
Click to expand...
Click to collapse
No, But i want to restore the original condition :
Related
Hi threre,my s3 lte i9305 was rooted but i installed the originla stock ee uk rom and reset the counter but kies still saying your device current firmware virsion not support update via kies..
i tried the change csc app but its not working and i cant find any option to change csc,it must got the original uk csc as i flashed the uk ee rom..
can you please help me to sort the problem.?
or any one got the diffrent csc files so i can try others..?
please help.
thanks
Did you try Factory reset? Reseting counter doesn't change your status. What is your Device Status? Normal or Modified? Also, you can dial *#1234# to check your CSC.
My CSC was changed to OPS or something after flashing Pandoriam Rom (made in Australia ). Few days ago I've came back to stock by using EE pre-rooted ROM from here. Now my CSC is EVR (BLL1 - EE UK)
djembey said:
Did you try Factory reset? Reseting counter doesn't change your status. What is your Device Status? Normal or Modified? Also, you can dial *#1234# to check your CSC.
My CSC was changed to OPS or something after flashing Pandoriam Rom (made in Australia ). Few days ago I've came back to stock by using EE pre-rooted ROM from here. Now my CSC is EVR (BLL1 - EE UK)
Click to expand...
Click to collapse
my device says normal and my csc is also EVR..
i did the factory reset from stock recovery but still getting the same messege in kies..
Hello to everyone
I download firmware via odin and i dont know if now i will get the ota updates!
Can anyone help me??
My csc before was dtm( t mobile germany)and now is eur/eur/dtm (eur is greece unbranded)
In phone info samsung(app) say that active csc is eur
I made all the steps and after downloading wipe cache/factory reset
Cabalerro07 said:
Hello to everyone
I download firmware via odin and i dont know if now i will get the ota updates!
Can anyone help me??
My csc before was dtm( t mobile germany)and now is eur/eur/dtm (eur is greece unbranded)
In phone info samsung(app) say that active csc is eur
I made all the steps and after downloading wipe cache/factory reset
Click to expand...
Click to collapse
use the CSC file and not the HOME_CSC.
Note this will wipe your phone
I made it..the csc no the home_csc
I live in greece thats why i download tge eur firmware
In phone info says
Product code:sm-n950fzkaeur
Original csc code:nothing
Firmware's csc code:nothing
Active csc code:eur
Available csc codes:nothing
Csc country:segr/gr
Mobile operator:vodafone gr/20205
Before i made flash in the ative csc was writing dtm and other product code and csc country
I think i made it change or no?
And i go to software information/service provider sw ver. It says
eur/eur/dtm
If i put the note 8 in recovery mode it says multiple csc and active code eur
With this i well get eur ota updates?
So confused
Cabalerro07 said:
With this i well get eur ota updates?
So confused
Click to expand...
Click to collapse
eur/eur/dtm the last CSC will never change as this is hardcoded in the phone firmware.
If the first two are EUR/EUR then you have the correct CSC for OPEN Greece firmware.
Fotis
So Fotis i will get the ota updates from greece??
Thanks for the answer
Cabalerro07 said:
So Fotis i will get the ota updates from greece??
Thanks for the answer
Click to expand...
Click to collapse
Yes you will I helped my brother with the same situation but phone from UK he received last week the OTA from EUR CSC
Parakalo
Eisai wraios filaraki
Hi everyone , I have Note 8 ( SM-N950F ) CSC : VAU ( Vodafone Australia ) UNLOCKED
i didn't wait to receive "ANDROID PIE 9" update , So I used Odin and Flashed the " Update for EGYPT - CSC : EGY "
and when Vodafone Australia Released the update i flashed the update for my original CSC : VAU and choosed CSC FILE not home-csc
when i went to recovery mode i found this error :
And my Brother's Phone too " S8+ SM-G955F CSC : XSA " Australia "
Both Phones :
I got the same problem
I updated my phone via OTA and still got the same problem. Nth to worry about it lets wait for samsung in the next few update .
Hi there, I need help.
I tried to flash the stock firmware but I got this message on my phone.can not do anything
I was on dr.ketan P13 trying to flash the stock firmware.
My device was UNITED ARAB EMIRATES(XSG) now is:
UNITED KINGDOM /IRELAND (XEU) since I flashed P13.
SW REV CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 2
After flashing Dr ketan's bootloader device booted well, but CSC country changed.
Any ideas how to go back to my original CSC Country.?
I will appreciate your help
osk4rin said:
Hi there, I need help.
I tried to flash the stock firmware but I got this message on my phone.can not do anything
I was on dr.ketan P13 trying to flash the stock firmware.
My device was UNITED ARAB EMIRATES(XSG) now is:
UNITED KINGDOM /IRELAND (XEU) since I flashed P13.
SW REV CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 2
After flashing Dr ketan's bootloader device booted well, but CSC country changed.
Any ideas how to go back to my original CSC Country.?
I will appreciate your help
Click to expand...
Click to collapse
use your last valid twrp backup from before the issue to restore:
carrier configs (odm)
efs
also when you flash full stock, use csc.md5 and not home_csc.md5 as CSC file.
it migh be good to research what the very latest firmware files are for your device. there should be a july update somewhere. so use that and try again.
if you want and try to fix ure csc issue try to flash zip in:
https://1drv.ms/f/s!AhXVLDDj8g3AgeA6IyH1iTzQAGB4MA
beware that you flash this at tour own free will and i cant be held responsible for anything.
do a full backup first.
in aroma choose DBT and choose ure correct CSC code.
bober10113 said:
use your last valid twrp backup from before the issue to restore:
carrier configs (odm)
efs
also when you flash full stock, use csc.md5 and not home_csc.md5 as CSC file.
it migh be good to research what the very latest firmware files are for your device. there should be a july update somewhere. so use that and try again.
if you want and try to fix ure csc issue try to flash zip in:
https://1drv.ms/f/s!AhXVLDDj8g3AgeA6IyH1iTzQAGB4MA
beware that you flash this at tour own free will and i cant be held responsible for anything.
do a full backup first.
in aroma choose DBT and choose ure correct CSC code.
Click to expand...
Click to collapse
How am I going to know which is the correct CSC code on that download CSC link?
I found a screenshot of my original CSC code(right)
and I screenshot one for the current. (left)
osk4rin said:
How am I going to know which is the correct CSC code on that download CSC link?
I found a screenshot of my original CSC code and I screenshot one for the current.
Click to expand...
Click to collapse
looks like its xsg
so looks like u are ok.
who is your sim carrier?
bober10113 said:
looks like its xsg
so looks like u are ok.
who is your sim carrier?
Click to expand...
Click to collapse
Sim carrier T-Mobile
I wanted to downgrade to Oreo, but I can't...still getting the same error mentioned above when I flashed Oreo firmware from the same region.
osk4rin said:
Sim carrier T-Mobile
I wanted to downgrade to Oreo, but I can't...still getting the same error mentioned above when I flashed Oreo firmware from the same region.
Click to expand...
Click to collapse
oh ok then. well there is TMO in the XAA usa menu in the csc zip. but you are in the us right? so its TMO usa ?
try it. if it doesn't work then flash back stock like u have been doing. if it does work post back here the same screen shot of that app. id be curious to see if it's correctly changes your csc
bober10113 said:
oh ok then. well there in TMO in the XAA usa menu in the csc zip. but you are in the us right? so its TMO usa ?
try it. if it dosenr work then flash back stock like u have been doing. if it does work post back here the same screen shot of that app. id be curious to see if it's correctly changes your csc
Click to expand...
Click to collapse
Yes, I am in the USA, but I bought my phone online .the original region is the UNITED ARAB EMIRATES
osk4rin said:
Yes, I am in the USA, but I bought my phone online .the original region is the UNITED ARAB EMIRATES
Click to expand...
Click to collapse
ok that dosnet matter since csc zip flashes tmo files.
so go ahead and try it if you want and report back.
im heading off to bed so good luck
bober10113 said:
ok that dosnet matter since csc zip flashes tmo files.
so go ahead and try it if you want and report back.
I'm heading off to bed so good luck
Click to expand...
Click to collapse
Thank you for your help and staying up late helping me.
I already download from Sammobile the most recent firmware from my current region.
it went throw and flash well. now ill just download the Oreo one.
Thank you!!
osk4rin said:
Thank you for your help and staying up late helping me.
I already download from Sammobile the most recent firmware from my current region.
it went throw and flash well. now ill just download the Oreo one.
Thank you!!
Click to expand...
Click to collapse
have same problem. I have Note 9 N960F on 9.0 N9 N960FXXS3CSG5 August Patch and i wanna go back to Oreo 8.1.0 N960FXXS2ARL3. But when i flash with odin always fail. " SW REV. CHECK FAIL(BOOTLOADER) DEVICE :3 BINARY: 2 " i know this August patch have XXS3 and 8.10 have XXS2. Any way to downgrade without fail ? PLEASE HELP ME
CruelB said:
have same problem. I have Note 9 N960F on 9.0 N9 N960FXXS3CSG5 August Patch and i wanna go back to Oreo 8.1.0 N960FXXS2ARL3. But when i flash with odin always fail. " SW REV. CHECK FAIL(BOOTLOADER) DEVICE :3 BINARY: 2 " i know this August patch have XXS3 and 8.10 have XXS2. Any way to downgrade without fail ? PLEASE HELP ME
Click to expand...
Click to collapse
ure flashing older firmware rev 2 on a bootloader revision 3 firmware phone.
u cant downgrade to 2 or 1. u have to flash 3 and up firmware.
u can search and read all about it if u take the time.
Hey all
Strange one here, i have a SM-G977B (S10 5G on EE UK), i have unlocked it and trying to flash BTU firmware on it via ODIN (download fw from sammobile)
It flashes ok and passes but when phone starts up its CSC is TEL! (Australia!!)
I have re done the flash with XEU and still the same. firmware version says TEL/TEL/EVR in settings
any ideas on this? can this model be flashed to a different region? i want it on BTU not EVR (EE UK)
tried few versions of ODIn too, and left all check boxes default
Thanks
ok, i have reflashed the latest EVR firmware back to the phone and it has taken this fine
Wonder why it doesnt like BTU or XEU?
What firmware files were you trying to flash specifically?
Sounds like you downloaded the wrong one. What are the names of the firmware files you flashed?
the_scotsman said:
What firmware files were you trying to flash specifically?
Sounds like you downloaded the wrong one. What are the names of the firmware files you flashed?
Click to expand...
Click to collapse
Hi
Tried these
https://www.sammobile.com/samsung/firmware/SM-G977B/BTU/download/G977BXXS2ASJ7/299842/
https://www.sammobile.com/samsung/firmware/SM-G977B/XEU/download/G977BXXS2ASJ7/299840/
The above all flash on in Odin, but when the phone starts (even with uk sim in the phone) it defaults to Australia language and 2x Telstra apps install automatically, software info says tel/tel/evr
I then tried this one:
https://www.sammobile.com/samsung/firmware/SM-G977B/VOD/download/G977BXXU2ASJ5/299590/
And the above install the 2x Vodafone uk apps automatically which is fine as I am on Vodafone uk but in software Info is still says vod/vod/evr
What my issue is now is I don’t seem to get 5g on this phone even though I’m on a a 5g contract and has worked previously on a note10+ 5g handset.
Is this handset 5g modem locked to ee?
bigup7 said:
Hey all
Strange one here, i have a SM-G977B (S10 5G on EE UK), i have unlocked it and trying to flash BTU firmware on it via ODIN (download fw from sammobile)
It flashes ok and passes but when phone starts up its CSC is TEL! (Australia!!)
Click to expand...
Click to collapse
Did you enable OEM unlock in developer options before flashing?
I am waiting for delivery of an EE branded S10 5G tomorrow and planned to flash BTU firmware
dezborders said:
Did you enable OEM unlock in developer options before flashing?
I am waiting for delivery of an EE branded S10 5G tomorrow and planned to flash BTU firmware
Click to expand...
Click to collapse
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
bigup7 said:
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
Click to expand...
Click to collapse
OK, well I have always had to do that to change CSC via FW flash since the S9 range was released in 2018.
I am waiting for postman to deliver my S10 5G today so will try to flash BTU with OEM Unlock enabled, and let you know the outcome.
(If it doesn't work for me, i will do same as you and flash a network specific FW via Odin - H3G is my network provider).
bigup7 said:
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
Click to expand...
Click to collapse
Didn't work ended up with TEL CSC code so just flashed latest H3G
dezborders said:
Didn't work ended up with TEL CSC code so just flashed latest H3G
Click to expand...
Click to collapse
If you go to software information in settings, does it say h3g/h3g/evr?
bigup7 said:
If you go to software information in settings, does it say h3g/h3g/evr?
Click to expand...
Click to collapse
Yes exactly. My product code is also SM-G977BZAAEVR, so its always going to be an EE UK handset
Hello,
I have the same phone (SM-G977B), I exchanged it with someone in Shanghai (without a box, stupid me)
It was rooted with some CHC firmware (which did not let me download any Google play services), I tried to root the phone (my first time) and ended up re-locking the bootloader.
Later on, while trying different things, I ended up deleting the firmware from TWRP (as I formatted the data, cache folders/directories) as it was not booting up (bootloop on Samsung logo).
Long story short (and rather sad and stupid):
I have a brick phone which has no SD card slot, No OS installed, I do not know the original CSC (except that it was bought in some country in Europe), other firmwares does not flash with Odin (gives me Repartition error failed error), I am unable to mount the device (thought I could transfer the firmware using MTP), I can not change TWRP (downgrade or upgrade) as disk won't mount (for some reasons). I have formatted the disk, changes its format to ext4, ext2 etc.
Any ideas?