Hi, I recently replaced my lumia 625 lcd screen + touch panel but the problem now is the touch screen is not detecting touch all along the right side (picture attached)
is there any fix i can do ?
at least is there a costumizable keyboard so i can move the layout to the left a little so i can type with all letters and numbers ?
Check again the connector.
augustinionut said:
Check again the connector.
Click to expand...
Click to collapse
disconnected then reconnect and same
Related
Hy
I try to replace a broken screen by a new one but, i have a white screen, i chek all and i can't find the pb.
I tried also to replace with the bad who have just some picsel defect, but is blank too?
Do U think I crash my Kaiser?
or I forgot something?
my lcd screen broke too. where do you buy your screen? I can't find it on ebay....
On http://www.docpda.com
is the colour of the connector cables from your old screen matching the screen u purchased?
Maybe this link would help out ppls who have dead screen and test confirm if is a dead phone or dead screen.
[URL="http://www.clickapps.com/download.htm?pvid=17427&PHPSESSID=41a849c2ece6445ee77fedfee8438842&T230820071122=1" said:
http://www.clickapps.com/download.htm?pvid=17427&PHPSESSID=41a849c2ece6445ee77fedfee8438842&T230820071122=1[/URL]
Click to expand...
Click to collapse
LCD Cracked! You still can view your PPC with your PC
Yes, you can still view the content of LCD cracked PPC with your desktop.
You can even run the applications in your PPC. Control your PPC using desktop keyboard and mouse
You can even Copy/Paste text between mobile and destop, or drag files to your mobile
Of course, you can also do screen capture too.
The main purpose of this program is to restore your data if your touchscreen is no longer working!
Remark: However, if you cannot go into the system (after a hard reset), this program does not work for you.
1. Unzip the file
2. Run the program in your desktop
Yes, my ppc work when is connected on activesync i can see and use it with activesync remote display.
I have read on an other post that is possible I damage the cable between the card under the screen and the " main board "
y2whisper said:
is the colour of the connector cables from your old screen matching the screen u purchased?
Click to expand...
Click to collapse
Yes the colour is the same but I have the problem of the white screen on the both screen the old and the new.
wow that is really weird, even when u put the old one back in its white? and everything is connected? including the black ribbon that u first pull off while opening the cover?
I would try to take some pics and post them see if anyone sees anything wrong.
Yes all are cenected. i search on this link to see if I made a mistake but I see nothing wrong.
I will retry to connect the old one but I think this will hapenning a white screen again.
Here's one on eBay
http://cgi.ebay.com/AT-T-Tilt-8900-...ryZ41343QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Full kit to do the replace.
thx but i already have a new screen, but I probably make a mistake
You are not alone. I had a cracked lcd on my Tilt also. Above the crack was white, below it I could still see smeared graphics. I bought a new screen and put it in and like you have an all white screen now. The phone still booted and i could make a call. I then put my broken screen back in and it was still white on top and smeared graphics below. I'm now wondering if there are multiple versions of the screen out there. Here is the info on my screen:
Old front: 002 TPO-A24B F1
Old back: p/n:60H00091-00M
New front: 001 TPO-A24B C4
New back: no numbers
If anyone else can help us figure this out please reply.
Have you had any luck getting the new screen to work?
I just bought a screen on ebay and hope that I do not run into computability issues.
Hello!
I have a weird error on my diamond 2 - I dropped it on the floor, so the touch screen got broke. I bought a new original one and replaced it as myself, which wasn't that difficult. The strange thing is that now when I move my finger up and down on touch screen the pointer moves side to side, and when i move finger from side to side the pointer goes up and down...? It's just like touch screen was rotated 90 degrees. Have tried to do a factory reset via a guide I found but it is still the same. Is it supposed to recalibrate the phone somehow?
Could this be a fysical connection error?
I tried to put cable in the other way but it was to short, and I can't figure out how to put it another than it is now. If i try to force it around 180 degrees it will be ripped off and break.
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
kadettilac89 said:
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
Click to expand...
Click to collapse
Try to align the screen
kadettilac89 said:
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
Click to expand...
Click to collapse
Hm, I'll check it out. It's possible connector ended up wrong, I was most happy that I got in place
Something72 said:
Try to align the screen
Click to expand...
Click to collapse
How do I align the screen?
Capitan2008 said:
How do I align the screen?
Click to expand...
Click to collapse
Start Menu / Settings / System / Screen / Align Screen
Something72 said:
Start Menu / Settings / System / Screen / Align Screen
Click to expand...
Click to collapse
I tried to go maneuver via the menu but it was impossible. But I didn't give up and Google instead and found this - "You need to simultaneously hold down Volume Up and Volume Down on the side of the device, and while holding them both down, just tap the screen and it will go straight to the alignment screen."
This works and my screen is now aligned, but still I got it's 90 degree ccw rotated.
I forgot to mention that i have replaced digitizer two times - one before this one, reason was i thought first one was broken/faulty
hi people.. i am having a problem with the touch screen of my phone.. the left column is completely not detecting any touch and this is giving me problems in typing letters like 'q','a' and 'z' which are on the left end of the keypad.. its not just a problem with the keypad since anytime i touch it nothing happens.. any idea what to do?
Claim ur warranty
hellbaron said:
hi people.. i am having a problem with the touch screen of my phone.. the left column is completely not detecting any touch and this is giving me problems in typing letters like 'q','a' and 'z' which are on the left end of the keypad.. its not just a problem with the keypad since anytime i touch it nothing happens.. any idea what to do?
Click to expand...
Click to collapse
check here maybe this could help.... but, with use your device rom
I recently replace my Htc touch daimond 2 touch panel/digitizer..
and after replacing its working but.. if i touch one icon it touches another..if i touch downward and it touches upward...
please.. help me.. to solve this problem.. what should i do.. reset it..:crying:
THANKS
Aurangzeb1990 said:
I recently replace my Htc touch daimond 2 touch panel/digitizer..
and after replacing its working but.. if i touch one icon it touches another..if i touch downward and it touches upward...
please.. help me.. to solve this problem.. what should i do.. reset it..:crying:
THANKS
Click to expand...
Click to collapse
Hi, do you try calibrate the touch panel?
Quick key hold volume up and down key at the same time, then touch the touch panel.
Aurangzeb1990 said:
I recently replace my Htc touch daimond 2 touch panel/digitizer..
and after replacing its working but.. if i touch one icon it touches another..if i touch downward and it touches upward...
please.. help me.. to solve this problem.. what should i do.. reset it..:crying:
THANKS
Click to expand...
Click to collapse
I had the same problem, connector(the one connecting motherboard and digitizer) is wrongly connected. Try to connect it upside down, and it should work. I change 2 digitizers already and had same issue on all.
Cheers!
Hi, i have weird touch problem on my sony xperia z1, please look at the attachment, i tried to draw a scratch to see which area that i cannot touch, i can't touch the white area
thanks for any help
smserwan said:
Hi, i have weird touch problem on my sony xperia z1, please look at the attachment, i tried to draw a scratch to see which area that i cannot touch, i can't touch the white area
thanks for any help
Click to expand...
Click to collapse
seems your touch screen in that area is dead..
type the *#*#7378423#*#* in dial pad to enter service menu
go to service test and go to touch..
check the same thing there.. if the result was the same, your touch is dead totally and you have to replace it mate