De Knoxed And De Bloated
Downloads:
stang5litre Edition 5.0 s9+ Pie v1
https://www.androidfilehost.com/?fid=1395089523397920727
stang5litre_ODM
https://www.androidfilehost.com/?fid=1395089523397921807
TWRP Instructions
1) Make A BACKUP!!!!! Make Sure Your On Pie Bootloader!!!!!
2) Download Rom and Put on SD or Internal Storage
3) Select normal wipe, no need to do advanced wipe. Then Swipe
4) Select Install And Pick stang5litre Rom
5) Flash / Swipe
6) Select Install And Pick stag5litre_ODM
7) Flash / Swipe
8) After Boot Let Apps Update before you start making changes!!! 10-15mins
9) ENJOY!!!!!!
Instructions For Beginners
Pre Flashing: Load all files onto the EXTERNAL sd card of your phone and backup internal storage to your external sd card or somewhere not on the phone in case you end up formatting data! Also make sure to use Odin 3.13.1 and have the Samsung USB driver installed on your computer.
Odin 3.13.1
https://samsungodin.com/download/Odin3_v3.13.1.zip
Samsung Mobile Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Klabit87 S9+ Pie Root Zip (g9650_pie_root_v2.zip)
https://androidfilehost.com/?fid=1395089523397899486
Klabit's Root Thread
https://forum.xda-developers.com/galaxy-s9/how-to/sm-g9650-sm-g9600-pie-root-t3900816
Magisk Manager (MagiskManager-v7.0.0.apk)
https://www.androidfilehost.com/?fid=1395089523397921811
Krog18 ODM Zip (s9+_ODM_combo_PIE_MOD_ATTVZWUSCTMXAA_V2.zip)
https://www.androidfilehost.com/?fid=1395089523397921801
stang5litre Pie ROM (stang5litre_Edition_5.0_v1_Pie.zip)
https://www.androidfilehost.com/?fid=1395089523397920727
stang5litre ODM Zip (stang5litre_ODM.zip)
https://www.androidfilehost.com/?fid=1395089523397921807
Pie Stock Firmware (SM-G9650ZHU3CSAB (Pie).zip) (Goes on your computer to be flashed via Odin)
https://mega.nz/#!h3AySArQ!bHCxBQkrbFNNfduc1AOa3pPryJYg-gPKT9PquN39B3Y
TWRP (twrp-3.2.3-0-star2qltechn.img.tar) (Also goes on your computer to be flashed in Odin)
https://dl.twrp.me/star2qltechn/
WARNING!!! DO NOT FLASH KROG ODM ZIP UNLESS YOU ARE ON A U.S. CARRIER (ATT, SPR, VZW, USC, TMB, XAA). IF YOU ARE NOT ON A U.S. CARRIER YOU MUST FLASH YOUR CARRIER'S ODM!!
READ OVER ALL THE STEPS BEFORE YOU BEGIN TO GET AN OVERVIEW OF THE PROCEDURE THEN MAKE SURE TO READ EACH STEP ENTIRELY BEFORE STARTING THE STEP!
1.Boot phone into download mode by holding down Power + Volume Down + Bixby and plug phone into computer. Odin Full Pie Firmware (SM-G9650ZHU3CSAB (Pie).zip). You must extract all the files from this zip in order to load them into Odin. Make sure to use the CSC file that DOES NOT contain the word "Home" in it. Before flashing, click the "Options" tab in Odin and make sure "Auto Reboot" is NOT checked. Flash.
2.When it is done flashing, hold Power + Volume Down until the screen turns black then IMMEDIATELY switch to holding down Power + Volume Down + Bixby to reboot into download mode.
3.In Odin, press the "Reset" button. Load twrp-3.2.3-0-star2qltechn.img.tar into the AP slot and once again make sure that Auto Reboot is NOT checked in the "Options" tab. Flash. If for some reason it fails on you, unplug the cable from the computer, reboot the computer, load Odin up and have it ready to go then hold down Power + Volume Down + Bixby and reboot the phone into download mode, connect the cable back to the computer and try again.
4.When it is done flashing, hold Power + Volume Down until the screen turns black then IMMEDIATELY switch to holding down Power + Volume Up + Bixby to boot into recovery (TWRP). If you fail to do this properly and it does not boot to recovery immediately hold down Power + Volume Down + Bixby to get back to download mode before it boots into system then try this step again.
5.Once in TWRP "swipe to allow mods" then click the Mount button then the Select Storage button and choose the external SD card.
6.Click the Install button and locate and select g9650_pie_root_v2.zip (which should be on your external SD card). UNCHECK "Reboot after installation is complete". Flash. If you DO NOT want data encrypted then go back to the main screen, select "Wipe" then choose "Format Data".
7.Press back until you reach the main TWRP screen then click the Install button once again. Locate and select stang5litre_Edition_5.0_v1_Pie.zip. Then click the "Add more zips" button and locate and select s9+_ODM_combo_PIE_MOD_ATTVZWUSCTMXAA.zip. Once again choose "Add more zips" and locate and select stang5litre_ODM.zip. This time make sure "Reboot after installation is complete" is CHECKED! Flash.
8.Phone will then reboot and you will sit on the splash screen for a few minutes then it'll load to setup. Run through setup then Install MagiskManager-v7.0.0.apk ONLY IF you formatted Data in TWRP in step 6. Magisk may show as not installed until after you reboot.
Attention All Devs You Are Not Allowed To Take My Work Without My Permission!!!
Known Issues:
None
Mods v1:
Tether Mod
Call recording unlocked
Menu Message share enabled
Notification reminder support added
Gradiant Status Bar Mod Added
3 Minit Battery Mod Added
Enabled RIL power saving features.
Enabled the camera during calls.
Added Screen Capture Toggle
Added Screen Recording
Theme Store Unlocked
stang5litre Boot Animation
Klabit Kernel with Govs
SHealth Fixed
Bike Mode Added
Well Being Added
11 Options In Power Menu Added
Invert Colors Toggle Added
Cast Toggle Added
Unlock After Boot With Finger Print Added
High Volume Warning Removed
And More!
Notes:
- The ROM will not update your Modem
- The Rom will update System to SAB
- All Knox, and All Amazon apps etc.
- This ROM does not change your bootloader
- NEED TO BE ON PIE BOOTLOADER!!!
- 9.0 TouchWiz Based 9.0 Experience OneUI
Disclaimer:
This Rom is able to be installed on the Galaxy s9+ Using TWRP
I am not responsible for anything that may happen or happens to your phone as a result of this custom firmware/Rom. You are choosing to install this yourself and thus assume any/all risks involved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
@sammy- For Source
@klabit87- Kernel, Advanced Tester, TWRP
@gharrington- 3mint Mods
@jrkruse - Expert Advising, And To Much To Post
@SuperR.- Kitchen
@Krog18- Over Half the Mods, Advanced Tester
@gadget! - Boot Animation!
@biikman - Advanced Tester
@tylerhole - Advanced Tester, Simple Pie Instructions
@Bren123 - Advanced Tester
Klabit Kernel Thread Link
Screen Shots:
COMING SOON
Follow Me On:
Twitter: @stang5litre
Pro-Boards: @stang5litre
Facebook: @stang5litre
Reserved 1
Reserved 2
Great! Thank you very much for your work!
Also, i'm currently on Oreo G950ZCS3ARL2, How do I update It to pie?
good job as always
Sygion said:
Great! Thank you very much for your work!
Also, i'm currently on Oreo G950ZCS3ARL2, How do I update It to pie?
Click to expand...
Click to collapse
You need to download the Odin files for pie. Check instructions for beginners, there should be a link and instructions
stang5litre 5.0 Edition Roms
hi!
there is any chance that works on g9600?
Excellent news, I'm about to download and try, thank you very much for your work.
Uallllll!!! What is that ODM file? Tks.
Sent from my [device_name] using XDA-Developers Legacy app
guastucci said:
Uallllll!!! What is that ODM file? Tks.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
It contains the cscfeature.xml which adds thr toggles for bike mode etc
stang5litre Edition 5.0 Roms
kartu_800 said:
hi!
there is any chance that works on g9600?
Click to expand...
Click to collapse
You would need to swap kernels out with @klabit87 s s9 kernel and try. No one has tested.
stang5litre Edition 5.0 Roms
But I need to flash both ODM files or only yours?
Sent from my [device_name] using XDA-Developers Legacy app
guastucci said:
But I need to flash both ODM files or only yours?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Edit: only flash krogs if you have a U.S. carrier.
Hi, thanks for the ROM.
Any way to definitely uninstall potato gradient? If I choose a color and then deactivate the app, it keep the color. So is save into system? Or the app is still on permission to modify system?
guastucci said:
But I need to flash both ODM files or only yours?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Only flash my odm zip if you're on one of the USA carriers listed in the zip name.
Sent from my SM-G9650 using Tapatalk
---------- Post added at 10:04 PM ---------- Previous post was at 10:02 PM ----------
PinG91 said:
Hi, thanks for the ROM.
Any way to definitely uninstall potato gradient? If I choose a color and then deactivate the app, it keep the color. So is save into system? Or the app is still on permission to modify system?
Click to expand...
Click to collapse
If you don't want your status bar colored, just open potato gradient and slide the alpha sliders all the way to the right to make it completely transparent
Sent from my SM-G9650 using Tapatalk
Tks Krog. Brazil here..
Sent from my [device_name] using XDA-Developers Legacy app
I have more than 3 hours with the rom and I must say that I think it's a great job, I have not had any mistakes, thanks to you and klabit for offering your work, I would like to mention that I would like some changes or improvements, such as:
- option to choose which commutator is displayed in the power menu.
- option to deactivate Gradiant Status Bar Mod, 3 Minit Battery Mod Added and restore the original battery.
for all your work I thank you forever, Greetings.
chalofito said:
I have more than 3 hours with the rom and I must say that I think it's a great job, I have not had any mistakes, thanks to you and klabit for offering your work, I would like to mention that I would like some changes or improvements, such as:
- option to choose which commutator is displayed in the power menu.
- option to deactivate Gradiant Status Bar Mod, 3 Minit Battery Mod Added and restore the original battery.
for all your work I thank you forever, Greetings.
Click to expand...
Click to collapse
If you want to have the original looking battery just go into 3minit, under authors choose users and select #15.View attachment 4728813
Sent from my SM-G9650 using Tapatalk
chalofito said:
I have more than 3 hours with the rom and I must say that I think it's a great job, I have not had any mistakes, thanks to you and klabit for offering your work, I would like to mention that I would like some changes or improvements, such as:
- option to choose which commutator is displayed in the power menu.
- option to deactivate Gradiant Status Bar Mod, 3 Minit Battery Mod Added and restore the original battery.
for all your work I thank you forever, Greetings.
Click to expand...
Click to collapse
I got this
stang5litre Edition 5.0 Roms
stang5litre said:
I got this View attachment 4729031View attachment 4729032
stang5litre Edition 5.0 Roms
Click to expand...
Click to collapse
oooh!!!, I'm speechless, I hope to try that new option soon, I know I should not ask, but will that new option be released soon?:fingers-crossed:
Related
BETA - MOD DS EMUI4.0.3
Special-Version
Hi!
Before we going to MOD, READ THIS!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HTML:
# Your warranty will be void!!!
# Battery must be above 50% before flash it!
# I m not responsible for any bricked devices, dead SD cards or what ever!
# YOU ARE CHOOSING to make these modifications!
# Before flashing do backup from your personal data!
# Backup BOOT, CUST, RECOVEY and SYSTEM images!!!
# You can restore it if mess up or you don t like it!
# This is the MOD that i have and I like it like it is!!!
# Do not blame me if something goes wrong on your phone!
# !!! I always advise to do a factory reset after flashing the ROM !!!
# Don´t complain if you don´t have done anything written above
#
#
#
#
Now the MOD!!!
MOD for Android 6 version
Is based on Stock B638,, i don´t test it on lower versions
You need to be in Android 6 first before install it!!!
To install ROM and mod:
Option 1:
Do backup with default backup app from Huawei
copy update.app to dload folder in sd card or internal memory, if you don´t have that folder you can create it
Install default recovery
Boot in to recovery and do factory reset
will in recovery press (vol +) (vol -) (power) at same time wait untill reboot and release only power then volumes when star installing
Again boot in to recovery and do factory reset
Press vol - and power untill boot in to bootloader
Install TWRP
Unplug USB!
Boot in TWRP by pressing vol + and power
Copy my mod in to phone and install my mod, reboot
restore backup
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Option 2:
Do backup with default backup app from Huawei
If you are in stock Android 6 and and even then it's not possible to flash any other default stock ROM use Rollback ROM Package bellow to unlock
Rollback Package Android 6 to 5
copy update.app to dload folder in sd card or internal memory, if you don´t have that folder you can creat it
Install default recovery if you don´t have it on phone
Boot in to recovery and do factory reset
will in recovery press (vol +) (vol -) (power) at same time wait untill reboot and release only power then volumes when start installing
Again boot in to recovery and do factory reset
Press vol - and power untill boot in to bootloader
Install TWRP
Unplug USB!
Boot in TWRP by pressing vol + and power
Copy my mod in to phone and install my mod, reboot
restore backup
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
Option 3:
Do backup with default backup app from Huawei
Install default ROM with TWRP
Go to reboot, choose recovery, let boot in to default recovery
Do factory reset
Press vol - and power untill boot in to bootloader
Install TWRP
Unplug USB!
Boot in TWRP by pressing vol + and power
Copy my mod in to phone and install my mod, reboot
restore backup
This is the default ROM update.zip B638<-LINK
And here is B638 by dload <-LINK
Changelog from default B638:
This update enhances carriers' network compatibility.
Integrates Google security patches released in Aug 2018 for improved system security.( 2018-08-05 ).
Kernel version Fri Aug 24 18:50:35 CST 2018
Changelog from my mod:
ROM cleaned - apps deleted but all can be found in Google Play Store
Try to get better performance - 06-05-2019
Fix Power drain - 06-05-2019
Add translator app
Add NFC tag app
Add new clonned apps, check bellow
Add a new default theme
Install Swift key as main keyboard
Add stock Recovery as main recovery . ( With phone off press vol+ and power)
Add TWRP 3.2.3 as recovery2: ( With phone off plug USB in to PC and in to Phone and press vol+ and power)
[*] Add Arena Of Valor Game - [ I play a lot! You can unistal after flash as default app ] - DELETED
Add Chrome Browser again - [ I use it as my default Browser. You can unistal after flash as default app ]
Add wifipro backgroung service
Call volume rised
Replace Bluetooh app with P9 Bluetooh app, works better and add Bluetooh direct sharing
Fix Theme Manager
Phone calls are now on 4G network, by default was on 3G ( can check it by turning ON data and do a phone call, old version add it to but i never check it to confirm)
better battery management
Mirror share was changed to Multi screen, it allow to connect to a Smart TV and use WIFI at same time with out wifi direct
Add lockscreen settings on lockscreen
Add 1080p in Youtube
Add new themes
Add P8 Lite 2017 Media Player
Add Smart rotation option on settings
Add option to hide Navigation Bar
Add ADB trough WIFI
Code:
How to use:
*Phone must be in the same network as PC
*Enable developer options
*Enable debug mode for USB
*Open ADB and type : adb connect your.phone.IP.here
*Check if in phone screen is requesting any permissions,
Give it!
*Done!
Better performance - Antutu tested 52000 score - OpenGLES 3.0 ON but not full working 10-04-2019
add some providers to cust to avoid balong issue
add lineageOS apn file
Unlock with draw - you cna draw C, E, M ,W to unlock
Have more shortcuts options on shortcut bar
Have Karaoke function
Fotos quality tweaked
Have MATE 8 camera app tweaked ( Activate more functions)
When you are on LTE zone it will show 4GLTE if not only shows 4G
Add Pixel function to Google Photos with unlimited upload ( upload limit set to the max of the user account limit) and full quality in uploads
Add Google Lens function and unlimited storage for backup in Google Photos ( the limiti is the one of your Google cloud)
Add clone app function, the empty spaces is because it is prepared for apps that you don´t have installed.
This are athe apps:
-Whatsapp
-Facebook
-Facebook messenger
-Instagram
-Telegram
-LinkedIn
-Youtube
-Google Play Games
-Google Photos
-Chrome
-Mega
-MediaFire
-Sapo Cloud ( Portugal)
Have multi window option
High Debloated
Have Fonts costumization - To use this You need a theme with font or a font theme that only have font to appaly )
Add missing libs in ROM
Have lock screen option with the palm of the hand (also works with the forearm, etc, etc)
Call Recorder
Boot tweaked for better response
Have floating video
Huawei P Smart bootanimation animation
Tweaked [ prop and xml tweaks]
SWS for speaker and headphones improved
DTS improved
Have Super night shoot in camera
Have Scanner in camera
Have light painting in camera
Have VoLTE ON by default
eyesight protection switch
Multiuser option
softlock key option
Have NFC tag app
Have launcher rotation option on launcher settings
And i think is all!
Click in the box to get the link for the MOD!!!
Special Note: Update zip linked to Stock Recovery, at the end will reboot in to Stock Recovery and will do FACTORY RESET!!!!!!!!!!!!
Click in Google Drive icon below to download MOD!
Google Drive
md5: 6f4f163609057b7c211aa146e475bf46 *Mod_B638_by_persona78.4.0.3.Special_version_060520192212.zip
* This are some apps that i cut of, to add if you want just download from Cloud storage below and install it as a regular app:
GoogleAndroidAuto.apk
GoogleAssistante.apk
GoogleCamera.apk
GoogleVRvrCore.apk
Huawei_Swype_for_Huawei.apk
HwMediacenter_12.11.2.306-121102306.apk
HwNfcTag.apk
HwThemeManager.apk
* I add 2 Wallpaper themes:
Cars.hwt
Nature.hwt
DON´T APPLAY LIKE DEFAULT THEME!!!!
Download
copy to HWThemes folder
Press a empty space on screen
select wallpapers
Select the wallpaper that you like
applay it
Cloud storage
MEGA
MediaFire
The other apps i cut you can find it on Google Play Store or just use Huawei Backup app to backup and restore after flash.
Flash zip was tested before upload - OK
Se HERE how to get Magisk and Xposed.
IMPORTANTE NOTE:
FACTORY RESET WITH TWRP WILL NOT WIPE FULL DATA, ISSUES WILL APPEAR.
NEED FACTORY RESET WITH DEFAULT RECOVERY.
Any other issue please tell me.
Use this zip to be easy to change recoverys, download and extract to desktop, open folder and use the bat to flash default recovery or TWRP.
PS: Don´t forget, you need to be in bootloader mode to flash...
flash_recoverys.zip
Update 01-02-2019 - add TWRP 3.2.3-ALE
If you like it press THANKS bellow!
.
@persona78 will you pls provide how to enable font style, eyesight protection and soft lock on screen.
Can I flash this rom on C432B610-NOVA directly?
Will C432B612-NOVA be released?
thanks
geppone1970 said:
Can I flash this rom on C432B610-NOVA directly?
Will C432B612-NOVA be released?
thanks
Click to expand...
Click to collapse
Yes, can be flashed over Nova, i don't gonna update Nova because i use the clone app option from Huawei launcher.
.
udtul said:
@persona78 will you pls provide how to enable font style, eyesight protection and soft lock on screen.
Click to expand...
Click to collapse
The font style was a issue i had done, by default rom let you do customise font, the other things are all re-written in many posts i this group!
Use the search bar!
.
After the first start I am asked to restore allow or not allow
persona78 said:
The font style was a issue i had done, by default rom let you do customise font, the other things are all re-written in many posts i this group!
Use the search bar!
.
Click to expand...
Click to collapse
Well I will search thank you for your work.
Have flased your huwaei pack but no eyesight protection and soft lock on navbar.
What is wrong?
@persona78 Please, can you tell me what software you used to make system.img? I really need it.
Tested, using it... Much better than B608 and even B610!
XTutorials said:
@persona78 Please, can you tell me what software you used to make system.img? I really need it.
Click to expand...
Click to collapse
I create and use this: https://forum.xda-developers.com/p8lite/development/betap8litetoolpack-mod-p8-lite-t3589396
.
D1stRU3T0R said:
Tested, using it... Much better than B608 and even B610!
Click to expand...
Click to collapse
I edited boot and add/change some apps from other models...
.
persona78 said:
I create and use this: https://forum.xda-developers.com/p8lite/development/betap8litetoolpack-mod-p8-lite-t3589396
.
Click to expand...
Click to collapse
Ok, but I found no option to rebuild system.img, how to use your tool? There are many files in there and I saw "repackimg" batch file but when I run it it says "No files found to be packed/built" What does that mean?
Hello, does the alarm clock work while phone is off?
XTutorials said:
Ok, but I found no option to rebuild system.img, how to use your tool? There are many files in there and I saw "repackimg" batch file but when I run it it says "No files found to be packed/built" What does that mean?
Click to expand...
Click to collapse
Use the pull system.img option, it will pull your system as image
persona78 said:
Use the pull system.img option, it will pull your system as image
Click to expand...
Click to collapse
Which one?
P.S. Sorry for very small text, but my Surface Pro has a bug with cmd windows.
XTutorials said:
Which one?
P.S. Sorry for very small text, but my Surface Pro has a bug with cmd windows.
Click to expand...
Click to collapse
Boot in twrp then use option 5!
You will get your phone system.img, only can be flashed using a zip and TWRP!
If you use option 4, you will get boot, recovery and cust images to then with option 6 you can create a flash zip with it!
.
persona78 said:
Boot in twrp then use option 5!
You will get your phone system.img, only can be flashed using a zip and TWRP!
If you use option 4, you will get boot, recovery and cust images to then with option 6 you can create a flash zip with it!
.
Click to expand...
Click to collapse
You didn't understood me, no?
I am making KangVIP 4.1 and I extracted system.img to mod it and now I want to repack it to be able to flash the rom... this is what I want to mean
How can I enable root on this rom?
Because Root Checker's app show that I don't have root
XTutorials said:
You didn't understood me, no?
I am making KangVIP 4.1 and I extracted system.img to mod it and now I want to repack it to be able to flash the rom... this is what I want to mean
Click to expand...
Click to collapse
Oh! That only with linux and i don´t know! Need to mount system, etc, etc... I found it some where one time will seraching in Google.
But do you have the mods on phone?
.
persona78 said:
Oh! That only with linux and i don´t know! Need to mount system, etc, etc... I found it some where one time will seraching in Google.
But do you have the mods on phone?
.
Click to expand...
Click to collapse
And how did you done your mods?
*Name officially landed on Mars aboard the Perseverance rover on 2nd of March 2021*
Note Fan Edition Rom
[OneUI 1.0][Android 9.0]
For S7/S7E F/FD
From MKUltraBlack
Jack O'Neill Kernel
Based on stock NFE from:
https://github.com/ananjaser1211/Helios_8890
This rom is straight flash with autodetect for kernel and battery text built into updater-script and omc will choose the csc, no aroma. Just flash and let boot, give 5-10 mins for first boot
Credits to @Kill-Switch for a LOT of his time and expert help and porting lessons
Also thanks to @ananjaser1211 for his expert help in the kernel and a lot of help in the rom too.
Thanks to @corsicanu for the recovery method and other help
Great guys
MKUltraBlack NFE V6.0 link:
https://www.androidfilehost.com/?fid=17248734326145734344
Base on Korean K firmware:
https://www.sammobile.com/samsung/g.../SM-N935K/KTC/download/N935KKKU4CUA1/1262323/
MKUltraBlack NFE V6.0:
Feb 2021 security patch
Secure folder
Screen recording
Long press reboot to recovery
Telegram group link in settings
GameTools
Game Launcher
Dual messenger
Applock
USSD codes
Bixby vision
Live draw
Google assistant
MKUltraBlack font
Network speed toggle
Straight flash - No aroma
NFE logo on power menu
Custom NFE boot animation
Auto detect (S7/S7E) install correct kernel and battery text
# Removed Bixby home
***************************************************
Flashable blcp for F international variant
Binary 8:
https://www.androidfilehost.com/?fid=17248734326145734341
***********************************************
******************
How to install
custom rom
******************
You will need:
*PC with Odin 3.13.1 or above
(https://samsungodin.com)
*TWRP .tar image for your model
Flat: https://eu.dl.twrp.me/herolte/
Edge: https://eu.dl.twrp.me/hero2lte/
*Rom
(Stored on external memory/sdcard)
*Unlocked OEM
To unlock OEM
********************************************
Go to settings, phone information, and tap build number until it says developer options unlocked, press back twice and go into developer options turn on OEM unlock
********************************************
1. Put your phone into download mode by turning your phone off, now press volume down, power and home key at the same time until the screen turns green, then release the buttons.
2. Open Odin on your PC and plug the USB cable into your phone and press volume up.
You will see it is connected to Odin, (there will be a blue rectangle saying com(number)
3. Select the AP section and load your TWRP .tar image in there.
4. Get ready to press volume up, home and power button at same time on your phone now press start on Odin, it will only take a few seconds, as soon as the box goes green and says pass, press the volume up, home and power button combo until TWRP splash screen shows up on your phone screen. Now release button combo and unplug USB cable from your phone.
5. In twrp press wipe, then format. A keyboard will appear, type yes and press enter. Now press back to go to TWRP main screen and press reboot and select reboot to recovery. It will now reboot back into TWRP.
6. Press wipe again, then format, type yes, press enter. (Do this 3 times)
Press back to go to TWRP main screen and press wipe, select advanced wipe, check all boxes apart from OTG and SDCARD and swipe. (Do this 3 times)
Press back to go to TWRP main screen and press wipe then swipe to factory reset. (Do this 3 times)
********************************************
Your phone is now completely clear with no operating system and ready to flash a custom rom. When you downloaded your rom, you stored it on your sd card or external storage, you need to do this as when you do all the wipes it wipes your internal storage but not your sd card, that's why it says in advanced wipe don't check the sd card or OTG boxes.
********************************************
7. Press back until you go to main screen in TWRP and select install, select storage, external (sd card) and select the rom zip. Now just swipe to flash.
Normally it will go into aroma which contains check boxes of extra items to add into the rom, this rom however is a straight flash, it will automatically detect your phone model and select the correct kernel and battery capacity. It will say Installation finished when done. Now go back to main twrp screen and select reboot and press system. The phone will reboot, leave it 10-15mins to allow it to load the rom, be patient. Then you will be at the set up page just like starting a new phone. Set up from there and enjoy the rom.[/PLAIN]
Good job. Congrats
Will try soon
Download link would be helpful
Kai Disobey said:
Download link would be helpful
Click to expand...
Click to collapse
Forgot to put link lol was in a rush yesterday.
Recovery button and twrp link in menu
MKUltraBlack said:
Forgot to put link lol was in a rush yesterday.
Click to expand...
Click to collapse
OOPS !
No mirrors Found. on AFH !!!
Kai Disobey said:
OOPS !
No mirrors Found. on AFH !!!
Click to expand...
Click to collapse
Gdrive link added
MKUltraBlack said:
Note Fan Edition Rom
For S7/S7E F/FD
From MKUltraBlack
Based on N935F:
https://www.sammobile.com/samsung/g...e/SM-N935F/CAM/download/N935FXXU6CSK1/308356/
Jack O'Neill Kernel
Based on stock NFE from:
https://github.com/ananjaser1211/Helios_8890
Secure folder working
Debloated Bixby Pretty much everything else left in
Link to MKUltraBlackTWRP in settings
MKUltraBlack font added
Recovery button in power menu
High Brightness warning removed
High volume warning removed
Sith Empire walllpaper added
Custom boot animation
November 2019 patch waiting for next security patch to update
Just a little thing I threw together to try porting, so nothing special
This rom is straight flash with autodetect for kernel and battery text built into updater-script and omc will choose the csc, no aroma. Just flash and let boot, give 5-10 mins for first boot
Credits to @Kill-Switch for a LOT of his time and expert help and porting lessons
Also thanks to @ananjaser1211 for his expert help in the kernel and a lot of help in the rom too,
Great guys
Link: https://www.androidfilehost.com/?fid=4349826312261725389
Gdrive link: https://drive.google.com/drive/u/2/...7h0kWG7PRnn3PjagUMQPlhtox?sort=13&direction=a
Chat:
https://t.me/MKUltraBlack_Rom
Click to expand...
Click to collapse
will you please guide?
How can I add a secure folder in another custom rom?
zasprince007 said:
will you please guide?
How can I add a secure folder in another custom rom?
Click to expand...
Click to collapse
Ask the developer of that rom to add it, there are guides here on xda
MKUltraBlack said:
Ask the developer of that rom to add it, there are guides here on xda
Click to expand...
Click to collapse
I tried but nothing works.
I also asked the developer to add The secure folder in their custom rom,
If you do help me I'm very thankful to you.
zasprince007 said:
I tried but nothing works.
I also asked the developer to add The secure folder in their custom rom,
If you do help me I'm very thankful to you.
Click to expand...
Click to collapse
Use this rom, it has working secure folder.
To get secure folder working you would need to have all Knox apps (which are probably debloated from his rom)
Do a build.prop edit and an smali edit in services.jar
I am not going to rebuild somebody else's rom
Any chance for Galaxy watch to pair ?
Thanks !
nicohak said:
Any chance for Galaxy watch to pair ?
Thanks !
Click to expand...
Click to collapse
Try this https://forum.xda-developers.com/s7...rary-fix-samsung-gear-devices-t3931738/page11
Removed Gdrive link, AFH is working now, it was just down for a bit. I want to use AFH so I can see how many downloads
MKUltraBlack said:
Note Fan Edition Rom
For S7/S7E F/FD
From MKUltraBlack
Based on N935F:
https://www.sammobile.com/samsung/g...e/SM-N935F/CAM/download/N935FXXU6CSK1/308356/
Jack O'Neill Kernel
Based on stock NFE from:
https://github.com/ananjaser1211/Helios_8890
Secure folder working
Debloated Bixby Pretty much everything else left in
Link to MKUltraBlackTWRP in settings
MKUltraBlack font added
Recovery button in power menu
High Brightness warning removed
High volume warning removed
Sith Empire walllpaper added
Custom boot animation
November 2019 patch waiting for next security patch to update
Just a little thing I threw together to try porting, so nothing special
This rom is straight flash with autodetect for kernel and battery text built into updater-script and omc will choose the csc, no aroma. Just flash and let boot, give 5-10 mins for first boot
Credits to @Kill-Switch for a LOT of his time and expert help and porting lessons
Also thanks to @ananjaser1211 for his expert help in the kernel and a lot of help in the rom too,
Great guys
Link: https://www.androidfilehost.com/?fid=4349826312261725389
Chat:
https://t.me/MKUltraBlack_Rom
Click to expand...
Click to collapse
I want to know about gaming performance?
I'm using a rom in which game does lagging like hell especially PUBG Mobile.
Will you share with us your rom game performance?
zasprince007 said:
I want to know about gaming performance?
I'm using a rom in which game does lagging like hell especially PUBG Mobile.
Will you share with us your rom game performance?
Click to expand...
Click to collapse
Download the rom, install pubg, play it and let me know.
I don't play that game, also I'm not sure there is a way to show "rom game performance", don't even know what that is.
Game tools
game tools and game launcher not available!!!
anwarmazaz said:
game tools and game launcher not available!!!
Click to expand...
Click to collapse
Debloated!!!
Thank you!
Thank you!!
Enviado desde mi SM-N950F mediante Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial TWRP 3.4.0.0 For Galaxy note 7 FE (N935X)
Disclaimer:
I do not own this device, however i work on the S7/S7E and there was enough requests for a FE support. so here we are.
This TWRP has been tested on 2 devices so far, it fixes mounting issues, and is based on new device trees. This should pave the way for other S7 developers to join in and add support to the FE since its not that difficult.
My custom kernel (Cronos) and Floyd Q Rom will make it to this thread once they are validated more.
Thanks to @butchieboy and Đỗ Gia Huy for testing
Also moving forward with this thread, you take full responsibility of any modifications done towards your device.
Features: :
Code:
- built from latest Pie source
- built from android-9.0 recovery sources
- fully compatible with Android 8.*/9.0/10.0
- Full F2FS Support for data and cache
- Full support for FLoydQ ROM
- Built with Busybox and resetprop
Downloads:
N935X (N935F/FD/S/L/K) : Download
Instructions:
Odin
Download latest Odin zip from Here
Download and install Samsung Drivers (if you have them installed you can skip this step)
Go to settings/Developer options and enable OEM unlock (If you don't see developer settings, go into Settings/About phone/Software info and tap "Build number" 10 times to show Developer options menu)
Download TWRP_*.tar
Switch off the phone
Use Home + Volume down + Power to enter Download Mode and connect the device to usb
Open Odin and untick autoreboot in "options" tab. Also make sure that your device is detected
Put TWRP_*.tar.md5 file into AP tab
Click Start
When Odin shows "PASS", take your device in your hands, disconnect the usb cable and press simultaneously the Home + Volume down + power until the Download mode pop-up shows
Press volume DOWN (so the phone reboots) then quickly press Home + VolumeUp + Power until the TWRP screen shows up
If it didn`t worked, redo the steps from #1 being more careful. and faster
TWRP (If you have a previous twrp installed)
Download TWRP_*.img, push it into phone storage (or external sdcard if thats not avalible), choose install image in your current recovery, navigate to downloaded *.img file, select it, select to flash as recovery.
After booting in TWRP download and flash no-verity-opt-encrypt-6.1 zip to disable data partition encryption
If for any reason you fail to install TWRP multiple times/different methods due to RMM Lock / KG State, make sure you check this thread
Rooting and Internal Storage:
Finally, if you want to be able to read/write to the internal storage, you must format it to clear encryption, take a backup of your stuff before hand.
Go to TWRP > Wipe > Format Data > Type YES.
your data is now usable. if you didnt flash noverity-opt-encrypt or MagiskRoot your data will be encrypted again.
If you want to root your device now, simply download the latest magisk and flash it in your new recovery.
Sources:
Device tee : Github
Kernel : Github
Credits:
TeamWin, corsicanu, morogoku, Shariq3422 and testers
XDA:DevDB Information
TWRP-3.4.0.0, Tool/Utility for the Samsung Galaxy Note FE
Contributors
ananjaser1211, morogoku, corsicanu, Shariq3422
Source Code: https://github.com/ananjaser1211/android_device_samsung_gracerlte
Version Information
Status: Testing
Current Stable Version: V1.0
Stable Release Date: 2020-06-23
Current Beta Version: V1.0
Beta Release Date: 2020-06-23
Created 2020-06-23
Last Updated 2020-06-25
Misc Links:
Telegram Support Group
[*]Telegram news Channel
Latest Magisk
FloydQ Oneui 2.0 Beta ROM + N7FE Kernel
F.A.Q
Q: TWRP can't mount data partition, what to do?
A: Make sure you formatted data partition.
Q: Can,t find OEM Toggle, RMM Locked
A : Read this thread
Q: How to format data partition?
A:
Q: Phone is showing only Samsung logo
A: Make sure you have the latest samsung stock firmware installed (to be on latest bootloader and modem combo)
Q: Why do i need to format data partition?
A: Because old rom encrypted your data partition and new rom can't decrypt and use that content / root needs access to data partition to place misc files / phone not booting after flashing root until data partition gets formatted.
Q: How to Use F2FS ?
A : This requires you to be on Floyd ROM and the latest FE CronosKernel build. otherwise you wont be able to boot. Follow these steps
1) Wipe > advanced wipe > Data > CHANGE > F2FS (Your entire internal storage will be wiped out!)
2) Reboot and you will have DATA as F2FS, the same can be done to CACHE as well. Do not do it to SYSTEM
P.S : Again, make sure BOTH your ROM and KERNEL support F2FS.
Please let me know what issues you find in this TWRP, i am aware it boots, backsup and flashes zips. but do let me know if USB / MTP works as expected or if it needs further work.
I will be working on adding FE Support to all my exynos8890 projects moving forward. hopefulyl putting some life in this forum
Yo ma...man
Well done bro!
USB OTG works. Got this error when formatting data. Restored backup that was generated, everything went fine booted up as normal.
Sent from my SM-N975U using Tapatalk
TWRP-3.4.0.0-gracerlte-20200625
TWRP-3.4.0.0-gracerlte-20200625
* Fix error in SAR disable script (Fixes installing android 9 roms while 10 is installed)
* include resetprop (required for SAR script)
* Add custom TWRP Ver Name
Download : Github
This should fix the error reported above, and fix installing Pie roms while having 10 installed.
Wow, you are all over the place my friend. Thank you..lol[emoji481]
Sent from my SM-N975U using Tapatalk
Error no longer present
Sent from my SM-N975U using Tapatalk
Getting error again when trying to create backup or flash anything
Sent from my SM-N975U using Tapatalk
butchieboy said:
Getting error again when trying to create backup or flash anythingView attachment 5048397
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Could you try to flash a pie rom while having my Q rom installed ?
the script is there to change /system_root mount point back to /system . which is due to recent TWRP changes
i think the script is erroring due to line endings, but im not sure. let me know if the ROM flashed.
for System backup always use the system image format while dealing with android 10. ill update you if twrp pushes any more updates to this
The only Pie roms that we had for FE caused major issues. Not sure if anyone even uses them there was 1 I think. Developer threw a rom together that would throw malware on your device, lock it up and made device unusable then vanished without fixing anything. So not sure if anything is out there and really don't want to update my bootloader.
Sent from my SM-N975U using Tapatalk
ananjaser1211 said:
Please let me know what issues you find in this TWRP, i am aware it boots, backsup and flashes zips. but do let me know if USB / MTP works as expected or if it needs further work.
I will be working on adding FE Support to all my exynos8890 projects moving forward. hopefulyl putting some life in this forum
Click to expand...
Click to collapse
Installed TWRP 3.4.0.0 on the SM-N930, everything works ... Thanks Bro !!!
---------- Post added at 10:02 AM ---------- Previous post was at 09:18 AM ----------
ananjaser1211,may I ask you to build a core for SM-N930X???...I will be grateful.
I have released my cronos kernel for Pie
For a feature list , they are mentioned on this thread here
So now you can use the same kernel from Q on pie ROMs if you choose so.
Download : Github
Enjoy
Just flashed your Floyd Q 3.0 on Note FE...my friend you are really keeping these older devices alive. Thank you.
NOTE FE FLOYD Q 3.0
thank you thank you THANK YOU
---------- Post added at 04:45 PM ---------- Previous post was at 04:41 PM ----------
It's work
butchieboy said:
Just flashed your Floyd Q 3.0 on Note FE...my friend you are really keeping these older devices alive. Thank you.
NOTE FE FLOYD Q 3.0
Click to expand...
Click to collapse
Did you have issues booting into system after you rooted? I know it's old but I just can't do it after flashing and following the root guide here
Nope sure didnt
Sent from my SM-N975U using Tapatalk
twrp-3.5.2_9-0-gracerlte.img
twrp-3.5.2_9-0-gracerlte.tar
ripee said:
twrp-3.5.2_9-0-gracerlte.img
twrp-3.5.2_9-0-gracerlte.tar
Click to expand...
Click to collapse
link broken
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Latest Version v5.4 [15/06/2023]ROM Maintainer: Andrei @starbucks2010
ROM Info:
Click to expand...
Click to collapse
Supported devices:[SM-G991B], [SM-G996B], [SM-G998B]
ROM Base:G998BXXU8EWF1 (Android 13 OneUI 5.1) June 2023 Patch Level
ROM Features:
Click to expand...
Click to collapse
Spoiler: View ROM features
Kernel:
Stock Samsung Kernel
CSC features:
Call Recording
Camera shutter sound menu
Real time network speed in statusbar
AppLock Enabled
ROM Disarm:
Knox partially removed
Light ROM debloat
Disabled Encryption
Disabled stock recovery-from-boot
Modded Settings/Services
Screenshots in secure apps allowed
Phone status: Official
Software Info ROM Details
BAck2Kill mod
Fixes:
Galaxy watch pairing
Bluetooth pairing after reboot
SafetyNet Patch (must enable Magisk hide and install kdrag0n's SN magisk module)
Secure Folder
Other Tweaks/Mods:
Warning boot screen removed, 2 custom boot animation
Automatic EFS backup
Various build prop tweaks
Pre-rooted with latest Magisk canary
Frame buffer increase to help gaming
Not working
Click to expand...
Click to collapse
Knox related apps: Samsung Pay, Samsung AutoFill
For Safetynet use latest kdrag0n magisk module - link
Changelog
Click to expand...
Click to collapse
v5.4
- Rebased to latest firmware EWF1 OneUI 5.1 **You must be on EWF1 firmware to flash the BR5.4 zip**
- Stock SHealth fix (tbc)
#######################################
PREVIOUS VERSION
#######################################
v5.3
- Rebased to latest firmware EWE1 OneUI 5.1 **You must be on EWE1 firmware to flash the BR5.3 zip**
Credits
Click to expand...
Click to collapse
- Mr. Waehere for the extraordinary CRB kitchen
- afaneh92 for S21 TWRP
- John Wu for Magisk
- LeeXDA18 for help with some fixes and Object remover port from S23
- The elite team of ROM testers
- Nguyen for back2kkill mod
- dutchman89 for Beyond Boot Logo
If you like my work, consider buying me a coffee (PayPal link)
Download Links
Click to expand...
Click to collapse
###############################
CURRENT VERSION
###############################
SM-G99xB ROM Link [EWF1] [BR5.4]
###############################
###############################
TWRP LINK
###############################
S21 TWRP [XDA]
S21+ TWRP [XDA]
S21U TWRP [XDA]
Installation:
Click to expand...
Click to collapse
Coming from full stock
Spoiler: How to go from Stock to BeyondROM
**Note: These steps will trip Knox and possibly void warranty on your phone**
**Note: Following these steps you will lose data on your phone, so back-up before continuing**
UNLOCK BOOTLOADER:
Enable Developer Options: Settings > About Phone > Software Information > Keep clicking 'Build Number'
Enable OEM Unlock: Settings > Developer Options > Click 'OEM Unlock' to enable it
Turn of phone
Hold Volume Up + Volume Down, plug in USB cable (PC to Phone)
Your now in download mode (Blue Screen)
Press and hold Volume up (bootloader unlock screen)
Pres Volume up to confirm
**Warning** This will now wipe your phone and restart and couple of times but this is normal
When the phone is booted, skip the initial setup, you don't need to sign in to anything.
Enable developer options again, go to developer options
OEM Unlock should be enabled and now greyed out
Congrats you've unlocked your bootloader
FLASH TWRP + PATCHED VBMETA:
Boot phone into download mode (from power off Volume Up + Volume Down and plugin USB cable)
Press Volume up to continue
Load up ODIN
Go to options and turn off auto reboot
Select USERDATA slot and select the TWRP+Patched VBMETA file (Device Specific)
Click Start
Odin should complete with a PASS
Now Keep USB cable plugged in, hold Volume Down and Power, as soon as the screen goes black hold Volume Up and Power
You should now be in TWRP
IN TWRP:
Do a full wipe (wipe > Format Data > type 'yes'
Reboot phone back to recovery (Reboot > Recovery)
Download ROM and copy either to the phone (PC to Phone) or to a USB OTG device (sorry no SD cards for S21 devices)
FLASH ROM:
In TWRP click 'Install'
If using OTG click 'select storage', select 'USB OTG'
Browse to the location of the ROM zip on the USB device, Select and wipe to confirm.
Follow on screen options
When flash is complete, click 'save logs' (in case you have any flashing issues)
Click finish
Reboot to System
After flash and setup download and install Magisk Canary app from Magisk github and install, when you run for the first time the magisk will need to do some setup and will then automatically reboot the phone
after reboot you're all set, congratulations
Coming from another custom ROM
Spoiler: How to move from another Custom ROM to BeyondROM
CLEAN FLASH (recommended)
Load into TWRP
Do a full wipe
Reboot back into TWRP
Flash Beyond ROM
DIRTY FLASH (warning)
Dirty flash may or may not work, we cannot guarantee that flashing a ROM over the top of another ROM will not give you any issues so it is therefore not our recommended choice, but obviously it's your device so feel free to do so but please do not ask for help with problems if this causes you issues.
Updating BeyondROM to latest version
Spoiler: How to update BeyondROM to latest version
This is obviously very dependent on which version you are running, I.E if your version 3.x jumping to 5.x, then there is a very high change that you will need to upgrade your phone to the latest FW before flashing latest BeyondROM.
Please take note of the changelog as it will say if you need to be on a certain FW version to flash this BR version or if dirty flash from previous version is ok (highly unlikely)
Where dirty flash is not possible and you do need to upgrade your FW to flash the latest these are the recommended steps.
It is assumed that you are already on BeyondROM.
Download the latest/required version of the firmware (Samfirm/Frija etc...)
Unzip the ROM
Rename the files and remove the .md5 from the end of the files
Boot phone into Download mode
Load up Odin, turn off auto-reboot
Insert the relevant files into their slots (BL = BL, AP=AP, CP=CP, CSC=HOME_CSC) **It's important to use HOME_CSC to keep your data intact**
In the USERDATA slot insert your TWRP+Patched VBMETA tar file (Device Specific)
Start Flash
When complete keep USB plugged in, hold Volume Down + Power, as soon as the screen goes black hold Volume Up + Power to enter TWRP
When in TWRP, flash latest BeyondROM (select Dirty flash option)
When complete, save logs, reboot to system
Enjoy!
Useful Links
Click to expand...
Click to collapse
BeyondROM S21 Group [Telegram]
BeyondROM S21 Group [Discord]
S21 TWRP [XDA]
S21+ TWRP [XDA]
S21U TWRP [XDA]
Installation:
Coming from full stock
Spoiler: How to go from Stock to BeyondROM
**Note: These steps will trip Knox and possibly void warranty on your phone**
**Note: Following these steps you will lose data on your phone, so back-up before continuing**
UNLOCK BOOTLOADER:
Enable Developer Options: Settings > About Phone > Software Information > Keep clicking 'Build Number'
Enable OEM Unlock: settings > Developer Options > Click 'OEM Unlock' to enable it
Turn of phone
Hold Volume Up + Volume Down, plug in USB cable (PC to Phone)
Your now in download mode (Blue Screen)
Press and hold Volume up (bootloader unlock screen)
Pres Volume up to confirm
**Warning** This will now wipe your phone and restart and couple of times but this is normal
When the phone is booted, skip the initial setup, you don't need to sign in to anything.
Enable developer options again, go to developer options
OEM Unlock should be enabled and now greyed out
Congrats you've unlocked your bootloader
FLASH TWRP + PATCHED VBMETA:
Boot phone into download mode (from power off Volume Up + Volume Down and plugin USB cable)
Press Volume up to continue
Load up ODIN
Go to options and turn off auto reboot
Select USERDATA slot and select the TWRP+Patched VBMETA file (Device Specific)
Click Start
Odin should complete with a PASS
Now Keep USB cable plugged in, hold Volume Down and Power, as soon as the screen goes black hold Volume Up and Power
You should now be in TWRP
IN TWRP:
Do a full wipe (wipe > Format Data > type 'yes'
Reboot phone back to recovery (Reboot > Recovery)
Download ROM and copy either to the phone (PC to Phone) or to a USB OTG device (sorry no SD cards for S21 devices)
FLASH ROM:
In TWRP click 'Install'
If using OTG click 'select storage', select 'USB OTG'
Browse to the location of the ROM zip on the USB device, Select and wipe to confirm.
Follow on screen options
When flash is complete, click 'save logs' (in case you have any flashing issues)
Click finish
Reboot to System
After flash and setup, download and install Magisk Canary app from Magisk github; when you run for the first time the magisk will need to do some setup and will then automatically reboot the phone
after reboot you're all set, congratulations
Coming from another custom ROM
Spoiler: How to move from another Custom ROM to BeyondROM
CLEAN FLASH (recommended)
Load into TWRP
Do a full wipe
Reboot back into TWRP
Flash Beyond ROM
DIRTY FLASH (warning)
Dirty flash may or may not work, we cannot guarantee that flashing a ROM over the top of another rom will not give you any issues so it is therefore not our recommended choice, but obviously it's your device so feel free to do so if you like but please do not ask for help with problems if this causes you issues.
Updating BeyondROM to latest version
Spoiler: How to update BeyondROM to latest version
This is obviously very dependant on which version you are running, I.E if your version 1.0 jumping to 3.0, then there is a very high change that you will need to upgrade your phone FW to latest before flashing latest version of BeyondROM
Please take note of the changelog as i will note if you need to be on a certain version to flash this version or if dirty flash from previous version is ok
Where dirty flash is not possible and you do need to upgrade your FW to flash the latest these are the recommended steps.
It is assumed that you are already on BeyondROM.
Download the latest/required version of the firmware (Samfirm/Frija etc...)
Unzip the ROM
Rename the files and remove the .md5 from the end of the files
Boot phone into Download mode
Load up Odin, turn off auto-reboot
Insert the relevant files into their slots (BL = BL, AP=AP, CP=CP, CSC=HOME_CSC) **It's important to use HOME_CSC to keep your data intact**
In the USERDATA slot insert your TWRP+PatchedVBMETA tar file (Device Specific)
Start Flash
When complete keep USB plugged in, hold Volume Down + Power, as soon as the screen goes black hold Volume Up + Power to enter TWRP
When in TWRP, flash latest BeyondROM (select Dirty flash option)
When complete, save logs, reboot to system
Enjoy!
Andrei
reserved
Good to know. I will try this rom as soon as I buy the S21U
Nice! Pleasant to see the s21 Ultra exynos development is picking up more and more!!!
Hi thanks for the awesome ROM!! I loved beyond ROM on s10 plus!
nice, the secure flag disabled in screenshots. my favorite rom. thanks.
very nice rom. thanks
Wow nice features thanks hows battery life
Hello ZonalRipper
If I may some suggestions for next update:
-Long press back or recent buttons options like kill app
-Additional system fonts
Great to see roms emerging for S21. Wondering if Beyond will be supporting S21+ G996B?
CarbonX73 said:
Great to see roms emerging for S21. Wondering if Beyond will be supporting S21+ G996B?
Click to expand...
Click to collapse
You have just to test mate and you will see
There is a good chance that it works because this rom already supports s21 ultra and s21 models.
And Beyondrom on s20 models supported all 3 models.
Thank you to the original dev for his work !
You should create a new topic for your rom on S21 & (maybe S21+ ?) xda section too.
Chcolat-tiède said:
You have just to test mate and you will see
There is a good chance that it works because this rom already supports s21 ultra and s21 models.
And Beyondrom on s20 models supported all 3 models.
Thank you to the original dev for his work !
You should create a new topic for your rom on S21 & (maybe S21+ ?) xda section too.
Click to expand...
Click to collapse
ok thanks for the info
Hybrid Modpack for S20 & S21 Exynos Series with BeyondRom 14.09.2021
Current Version: 1.6
Supported Devices: SM-G991B, SM-G996B, SM-G998B
Supported BeyondROM Version: 1.7
Supported Firmware Version: XXS3AUHD
Instructions:
Backup your System with TWRP. I'm not responsible for any damage.
Flash the Modpack via TWRP
Make sure you have selected the correct variant.
If you use Xposed and xposed modules, it might create some issues with the SystemUI Mods inside of the modpack. Be warned.
Please save the Aroma Log at the end of the Modpack installation. It might help for troubleshooting.
Let me know if something is abnormal or not working.
Spoiler: Content
Debloat:- Debloat Google, Samsung and Misc Apps
Fixes:
Samsung Dex Fix
Mods:- Audio:
Viper4Android
Stock
- SystemUI:
All SystemUi Mods incl. 3Minit Battery
DisabledWarnings+MultiTile
DisabledWarnings+MultiTile+CircularBattery
Stock
- Fonts:
Modded Samsung Sans
Google Product Sans
Stock
- Streaming:
Streaming Mod for Amazone Prime and Netflix SD
Stock
- Multimedia:
Youtube Vanced
Stock
- CSC_Change: You can change the CSC if you want to
CSCFeatures:
Override Data Icon
Enable Wifi Advanced Menu
Disable AntiMalware
Set Color of Days to XXXXXBR
Enable Shutter Sound Menu in Camera
Enable Camera during Calls
Enable SMS Notification Popup in Camera
Provider for unknown Number
Enable LTEOnly in Network Menu
Enable Realtime Networkspeed
Quicksetting Toggles
Enable Callrecording
Enable Protection for Recent Apps
Disable Knoxguard
Enable eSIM Support
Enable Applock
Enable Data Usage on Quickpanel
Spoiler: Additional Notes
For Viper4Android how will need to activate Legacy Mode in it
Streaming Fix doesnt activate Netflix HD on rooted devices
Some CSCFeatures aren't working anymore on Android 11
If you want to download additional Battery Icon then look here:
Here
Thanks for @gharrington for this
Spoiler: Credits
@starbucks2010
@ZonalRipper
@ianmacd
@gharrington
@afaneh92
@exocetdj
@zidane02 for some help
@Grouxho
S20 & S21 Testing Crew
Spoiler: Changelog
1.0: Initial Version
1.1: Added Support for SM-G996B
Some Script corrections
1.2: Removed BT and Safetynet Fix, not needed
Added Samsung Free to Debloat / Bloat List
Viper4Android works now with stock kernel too
1.3: Removed Option to Restore Bloatware (no one is using this)
Added 2 more Mods:
1. Disabled low Battery Warning
2. Possible to use camera flashlight on low battery level
1.4: Updated S21 SystemUI Mods to BeyondROM 1.3 based on XXU3AUF2 Firmware
Updated S20 SystemUI Mods to BeyondROM 3.4 based on XXS8DUE4 Firmware
Added MultiTile Mod
Updated Samsung Dex Fix
1.5: Updated S20 SystemUI Mods to BeyondROM 3.5 based on XXU8DUF9 Firmware
Updated S21 SystemUI Mods to BeyondROM 1.5 based on XXU3AUG4 Firmware
Removed 3Minit Clock
1.6: Updated S20 SystemUI Mods to BeyondROM 3.7 based on XXU9DUH5 Firmware
Updated S21 SystemUI Mods to BeyondROM 1.7 based on XXS3AUHD Firmware
Added Circular Battery
Added SystemUI-Mods + Stock for each variant of S20 & S21 series
Possible to Reinstall AR Apps
Spoiler: Download Links
GDrive
MEGA
MediaFire
Have Fun!
CarbonX73 said:
Great to see roms emerging for S21. Wondering if Beyond will be supporting S21+ G996B?
Click to expand...
Click to collapse
S21+ [G996B] is currently in testing
vegetaleb said:
Hello ZonalRipper
If I may some suggestions for next update:
-Long press back or recent buttons options like kill app
-Additional system fonts
Click to expand...
Click to collapse
The BACK button to kill app in it self if almost enough reason to switch to this ROM!!!!
And that MODPACK in the above post is also quite attractive!!
Can anyone give feedback for this rom? I want to try but hesitant for having to set up everything all over again.
vibrantliker said:
Can anyone give feedback for this rom? I want to try but hesitant for having to set up everything all over again.
Click to expand...
Click to collapse
Are you currently on KETAN?
babyboy3265 said:
Are you currently on KETAN?
Click to expand...
Click to collapse
no, stock
ZonalRipper said:
S21+ [G996B] is currently in testing
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
I'm not responsible of any damage made to your device by installing this ROM
Following the installation process will trip Knox, thus your device warranty may be void.
Click to expand...
Click to collapse
What's working?
- Audio
- Bluetooth
- LTE
- Display
- WiFi
- Charging
- Location
- Encryption
- Camera
- S-pen
- Enforcing SELinux
What's not working?
- You tell me
Installation instructions
Spoiler: Installation instructions
Installation requirements
- A computer
- ADB installed on the computer, you can find a guide here
- Odin (v3.14.1 is verified to work fine), you can find it here
- A decent battery level on the device
Step 1 - Unlocking the bootloader
You may skip this section if you have already unlocked your device
- Enable developer options
- In developer options, toggle the "Allow OEM unlocking" setting
- Reboot into download mode following the instructions below
- Once into download, long press the volume up button and follow the instructions on the screen
- After the bootloader is unlocked, your data will be erased, so make sure to back it up first.
- Now, once the system has finished booting, you MUST connect to a WiFi network, enable developer options again, and make sure that the OEM unlocking toggle is on and grayed out. If you do not see the toggle on the developer settings, close the settings and try again a few times.
- Once you see the toggle greyed out, all is set.
Step 2 - Installing the LineageOS recovery
In order to flash the ROM, you need a custom recovery, which you can find on the downloads section.
For installing the recovery:
- Boot into download mode as described below
- Press the volume up button a single time to fully enter download mode
- Connect your device to your computer
- Once you are in download mode, open Odin and make sure that it detects your device
- Go to options on Odin, and disable auto-reboot (DO NOT ENABLE ANY OPTIONS OTHER THAN F. Reset Time and Auto-Reboot)
- Download the vbmeta.tar file from the downloads section
- Select on the "Ap" button the vbmeta.tar file and then click "Start"
- Download the recovery.tar file from the downloads section
- Select on the "Ap" button the recovery.tar file and then click "Start"
If Odin gets stuck (specially when flashing recovery.tar), you might try the following:
- After you flash vbmeta, reboot into download again, and directly flash the recovery (once you have flashed the vbmeta once you shouldn't need to flash it again)
- Try a different PC or USB cable
- Try a different version of Odin
Click to expand...
Click to collapse
- Once the flashing completes, power off your device by pressing power + volume down, and after the screen turns off, quickly press the key combination for booting into recovery
- If everything went fine, you should be now on the LineageOS recovery
Warning: if you boot into the OneUI again, it will overwrite the custom recovery and you'll need to install it again!
Step 3 - Installing the ROM
- Download the ROM from the downloads section (make sure you download the .zip file and not the .sha256sum file)
- Once in recovery, go to the "Apply update" section, and click "ADB sideload"
- Connect your device to the computer, and sideload the update with adb sideload path/to/file
An example of the command on Windows can be adb sideload C:\Users\myuser\Downloads\lineage-20.0-20230223-unofficial-gta4xlveu.zip
Click to expand...
Click to collapse
- Your device should start verifying and installing the update
- After the installation has finished, you need to format the data partition (Factory reset -> Format data/factory reset)
- Now, click "Reboot to system"
- If everything went correctly, you should be booting LineageOS
How to boot into recovery/download modes:
Spoiler: Booting into recovery/download
Download
- For booting into download, you will have to press at the same time the power and the two volume buttons until the "Download" screen shows up.
- If you want to boot into download with the device powered on, you have to press the reboot option and right after that, press the key combination as mentioned above.
Recovery
- First, make sure to connect the device to a computer, otherwise the tablet won't allow you to boot into recovery (it's a Samsung restriction).
- For booting into recovery, just press the power and volume up buttons. Once the Samsung logo / bootloader unlocked warning has appeared, you can release the buttons and press the power button to skip the warning screen.
- Just like with the download mode, if you want to boot into recovery with the device powered on you just have to press the keys right after pressing the reboot button.
DownloadsAll files (ROM, recovery and vbmeta) are available at https://files.danielml.dev/android/gta4xlveu/.
Both models (WiFi and LTE) are compatible with the same ROM zip (gta4xlveu).
Help and supportJoin the Telegram group for getting support
Other details:
Kernel source: https://github.com/gta4xlve-dev/android_kernel_samsung_gta4xlve
Device source: https://github.com/gta4xlve-dev/android_device_samsung_gta4xlveu
Reserved
Thank you very much, i will test it next week.
Testing out the new ROM, glad to see one for the Qualcomm 2022 version.
Battery stats works
Camera works
Using lawnchair 2 and it works! Pixel keeps crashing (?)
Thanks!
K9droid56 said:
Testing out the new ROM, glad to see one for the Qualcomm 2022 version.
Battery stats works
Camera works
Using lawnchair 2 and it works! Pixel keeps crashing (?)
Thanks!
Click to expand...
Click to collapse
Glad to see that you liked the ROM.
Here Pixel launcher works, not sure why it doesn't there.
Anyways, I'll remove GApps by default on future builds so the Pixel launcher won't be present. (Of course, you'll be able to install a custom GApps package).
Thank you! Also started to test now. I disabled most of google app from the start and went fdroid/aurora way (waiting with anticipation for no google version). Nothing crashed yet.
btw, how to root this image? is patching boot.img and replacing it in zip and then flashing as above enough, or is there any changes required for vbmeta?
bugit said:
btw, how to root this image? is patching boot.img and replacing it in zip and then flashing as above enough, or is there any changes required for vbmeta?
Click to expand...
Click to collapse
Well, I didn't try, but just flashing Magisk *should* be enough.
daniml3 said:
Well, I didn't try, but just flashing Magisk *should* be enough
Click to expand...
Click to collapse
unfortunately this method does not work: during sideload it fails with `Unable to repack boot image` and recovery logs are somehow empty, but still managed to boots after this error
i will try with patching boot.img when i will have more time
ok, i managed to flash image with patched boot.img (extract zip, uload boot.img to device, patch with magisk, download patched boot.img, remake zip image),
but just flashing patched image from recovery made my existing system unbootable
and i had to reflash stock firmware and then repeat flashing steps from scratch
(flash vbmeta/recovery, and then flash patched image),
with this the device is booting and root is working
notes:
- the unbootable state from above was device going into black screen just after samsung logo, with no hints of activity (10 min was max i waited)
- only pressing all tree keys (power, volume up and down) made it reboot with about one second of turn off state (so one can't actually power off the device, it just boots up again into black screen after logo)
- after reboot i was not able to enter recovery or download mode by just pressing known combinations of buttons, and the only way to enter download mode was: during this 1 second power off state to press volume up and down keys and connect usb cable (spend some time finding this solution)
- during flashings after uploading vbmeta i could not flash recovery right after vbmeta (it gets stuck during upload) and i had to reboot again into download mode and then flash recovery (this happened both during my first try to install this image, and with the patched image)
- for some reason in this image i have two sets of navigation buttons at the bottom of the screen (the triangle, circle and square buttons), one is standard android set and one compressed to the right side of nav.bar; stopping pixel launcher removes the compressed one, but the square button (task switching) stops working
- after installing patched image i also noticed (in hindsight) that actually during first install the scroll was very choppy (and the system was kind of slow), but in second install this problem went away
Thanks a lot for the ROM. The following steps for rooting lead to success for me:
1. flashing according to the instructions as described by daniml3.
2. copy Magisk 25.2 to the external SDCARD and rename to .zip
3. reboot in recovery
4. factory reset -> format data/factory reset
4. do not boot, but install Magisk from tablet via ADB from SDCARD
5. reboot
6. rename magisk to .apk again and install the app
7. set up Magisk
8. after reboot be sure to complete ANDROID setup
It rocks!
The navigation buttons are also duplicated for me.
I hope I could help.
I wish a LineageOS without Google.
Thanks everyone for the feedback! There are a few notes:
- I'll release a version without Google Apps as soon as possible (most likely this weekend).
- The lag when booting is caused due to some overlay issue, I still have to look into it, but as it doesn't affect much to the functionality after a few seconds its not a "priority".
- The duplicated navigation buttons are actually an issue from the Google Apps (maybe the Pixel Launcher?). This will be fixed with the Google app-less version of the ROM. If you switch to gesture navigation this issue dissapears.
Is there a possibility for SM-P619 LTE version?
Razor64 said:
Is there a possibility for SM-P619 LTE version?
Click to expand...
Click to collapse
As I said on the post, if you have the LTE model, and want to try a build, just let me know (preferably by Telegram).
Uninstalling the pixel launcher via adb removes the extra icons.
Small lag at start-up but other wise a smooth-running rom.
Thanks!
Today (if everything goes as planned) I'll publish a new update for the WiFi-only model, including:
- Enforcing SELinux
- Removed GMS by default (you can install them as a separate package, personally BitGapps worked perfectly)
- Fixed some background services crashing
This will probably be the last update in a (few) week(s), as I'm working on an source-built-vendor device tree, which may take some time.
I'm also working on a build for the LTE variant, which will be published as soon as I verify that it works correctly.
At the moment I am not at home. After my short vacation I am looking forward to try it at the end of the week.
Many thanks for your work.
A new update for the SM-P613 (gta4xlvewifi) was published just now with the following changes:
- Enforcing SELinux
- Removed GMS by default (you can install them as a separate package, personally BitGapps worked perfectly)
- Fixed some background services crashing
Download it at https://sourceforge.net/projects/gta4xlve-dev/files/gta4xlvewifi/lineage-20.0/
Warning: If you used GMS, you'll need to manually install them (I use BitGapps and they work correctly).
Latest update runs really smooth with bitgapps. Lawnchair works with no problems. Thanks again for this ROM!
Bit of a stretch to ask, but would it be possible for the build to identify itself as a tablet, rather than a phone? And the possibility of defaulting the orientation to landscape? (90 degree rotation as default rather than 0)