It's like the elephant in the room around here. The bluetooth service on 2.1 is some crazy, broken crap. No matter how many times and how many ways I try to get it to pair to my brand new Kenwood x994 it refuses to save. It will eventually link up BT audio if I search for devices and let the pairing fail, but what a PIA to mess with every time I get in the car. I rolled back to Fresh 1.1 today and I had it paired and working perfectly in 10 seconds.
So here is the question, can we put the 1.5 BT stack into the 2.1 ROM? I already tried the 1.5 libbluetooth.so in the /system/lib filesystem, but it didn't change anything about the pairing problem (obviously I have no idea what I am doing and stabbing blindly at anything bluetooth related).
Anybody have any ideas? Is the BT compiled into the kernel? Can we recompile it with the 1.5 version?
I've asked this question a few times already and the answers are usually 'no'. Gawd I wish we could as no 2.1 roms (I've tried almost all of them) will pair voice (audio is OK) with my Pioneer Avic D3 car radio. 1.5 works perfect
Mine works exactly the opposite. The hands free phone works perfectly, but the phonebook doesn't download and BT audio fails to connect.
It sounds like it may be your phone, your should update with the official 2.1, then take it to a sprint store and have them replace it.
My phone has worked flawlessly to my jeep stereo with any 2.1 rom I have used in the last several months.
So this whole time I thought it was because we had a leaked version, but is this the official ROM that still has this problem. It's not the device cause I've had it replaced twice and my wifes doesn't work either.
I am not able to connect to my Pioneer AVH btw.
djorijun said:
So this whole time I thought it was because we had a leaked version, but is this the official ROM that still has this problem. It's not the device cause I've had it replaced twice and my wifes doesn't work either.
I am not able to connect to my Pioneer AVH btw.
Click to expand...
Click to collapse
I agree, if it was the hardware it wouldnt work with 1.5 either. Besides, Dan Hesse is my boss. He'd get hacked if I took back my phone
Thread moved.
Ive been having an issue with the bluetooth displaying song info on my cars display.
A little back story, my Samsung S5 displayed fine on my cars display. When I got my Nexus, it did not display. I rooted, installed new radios and Pure Nexus ROM, and song info still would not display. I had planned on replacing the factory radio in my car anyway, so it wasn't a big deal at the time. Had an app radio 3 for awhile and that worked just fine in Pandora mode, but in regular bluetooth mode, no info would display. I recently switched back to the factory radio and now I would like to figure this out.
Info:
Car: 2013 Nissan Altima, base radio.
Phone: Nexus 6
Baseband: MDM9625_104651.11.05.17R
Currently on the 20151209 Pure Nexus version but downloading 20160109 as we speak.
If you need anymore info, just ask.
Thank you!
Bump.
Anyone have any ideas? Or know of another forum/section I can post in?
I have been reading through the forums looking for solutions to specific issues that I am having with my head unit. I have had it for a month and after 3 weeks the wifi gradually stopped working so I can't directly connect to the Internet currently with the head unit.
So while I was on vacation I attempted to update the firmwares to more current...
Original MCU was KLD6 V2.83 I am now running the latest...
update.img is now one of Mal's from August iirc... anything any newer than that would just sit at the boot screen,
Problems started when I updated the MCU without backing it up...
Issues as follows...
1. Radio no tune, no sound (Setting up factory settings corrected this by trial and error)
2. Bluetooth pairs but no activity...(Setting up factory settings corrected this by trial and error)
3. DVD plays audio no video to head unit. Factory did not require the wire to be grounded. Went back and grounded and still will not play video sound is ok. So the question here is how do I get video on the head unit? I have not found a setting for this...
4. WiFi still broken (it did work for about 5 minutes then failed) No MAC address populated in the settings.
I ordered a 3G dongle however was shipped one that does not work with my unit nor does it work on the network here. (800/1800 was shipped which does not work here in the states) So I ordered another hoping that I get the correct one....
Hi all,
I have just installed a Hizpo MTCD PX3 2gb that came with Android 7.1.2. I was having some issues trying to add a google account and had the brilliant idea to do a factory reset. When it was back the Bluetooth app was gone. Does anyone know how to get it back?
Thanks!
I'm surprised a factory reset would do that - suggests its not baked in to the rom?
This guy over at another forum got an update from them to solve some bt issues - maybe he will share it with you or you can get something similar from hizpo http://www.ft86club.com/forums/showthread.php?t=120529&page=6
Sorry I can't be much help (still researching before I but one). Was BT calling working well before the reset? Questionable Bluetooth quality is something scaring me off these head units generally.
Hi, that's very helful already! Thanks!
I'll try to contact him and get the update from him.
Cheers!
jpt000 said:
Hi, that's very helful already! Thanks!
I'll try to contact him and get the update from him.
Cheers!
Click to expand...
Click to collapse
Good luck - Hope you have a win! I'll be keen to hear how you find the unit. I'm tempted to pick one up.
Hi,
I contacted Hizpo through ebay and they replied immediately with a link to the firmware and instructions. In case anyone needs, here is what they sent:
Sorry for the trouble, please try the following steps:
www.hizpo.com/Product/CS_Files/new4_px3_7.1_201700705.7z
Unzip the update and copy it into your U disk—Insert your U disk into the stereo—Setting—— About the device—Update—Install—The stereo will update automatically
Please restart the stereo after update successful, it needs 2-3 minutes, which is normal.
Keep the stereo is energized state, or the stereo will not power on.
jpt000 said:
Hi,
I contacted Hizpo through ebay and they replied immediately with a link to the firmware and instructions. In case anyone needs, here is what they sent:
Sorry for the trouble, please try the following steps:
www.hizpo.com/Product/CS_Files/new4_px3_7.1_201700705.7z
Unzip the update and copy it into your U disk—Insert your U disk into the stereo—Setting—— About the device—Update—Install—The stereo will update automatically
Please restart the stereo after update successful, it needs 2-3 minutes, which is normal.
Keep the stereo is energized state, or the stereo will not power on.
Click to expand...
Click to collapse
have you tried? is it working?
Yes, everything is fine now.
(I upgraded to the version I found in this topic)
I have some problems with Bluetooth. it stops working. He may be working for a week and suddenly he stops working. To work I have to reset or even restore.
With the previous version the same happened.
Is there a newer update? Is there any fix?
Help please
jpt000 said:
Hi,
I contacted Hizpo through ebay and they replied immediately with a link to the firmware and instructions. In case anyone needs, here is what they sent:
Sorry for the trouble, please try the following steps:
Unzip the update and copy it into your U disk—Insert your U disk into the stereo—Setting—— About the device—Update—Install—The stereo will update automatically
Please restart the stereo after update successful, it needs 2-3 minutes, which is normal.
Keep the stereo is energized state, or the stereo will not power on.
Click to expand...
Click to collapse
Thank you so much for sharing :good:
Will this update fix a hizpo that’s stuck in a boot loop? I’ve tried contacting hizpo and so far no response. Mine is supposed to have 7.0.1 on it.
robert6983 said:
Will this update fix a hizpo that’s stuck in a boot loop? I’ve tried contacting hizpo and so far no response. Mine is supposed to have 7.0.1 on it.
Click to expand...
Click to collapse
my boot loop was caused from my power antenna wire on my nissan not being connected to the stereo harness. wierd but it was the cause i ended up getting a free radio due to this. cause i initially thought i received a defective unit so they told me to keep the first one and sent me a new one free. lol make sure your antenna blue wire i believe is connected.
Hizpo update problem
Dear friends after installation of hizpo android 10 inch multimedia to my honda 2007 gas car, AC unit does not function, the controllers do not appear on the android screen, or you cannot run the ac.
Anyone with similar problem, and a solution is welcome. Please help.
I know it's a bit to read but here's the deal. I have had 3 different Android Head Units, a forth on the way. On one unit an AllWinner R16 branded Eonon GA7166 I have been able to play my YouTube TV app... On all others, and even on the same unit with different firmware, it doesn't play. On all units / builds of Firmware the regular youtube / amazon video work just fine.
What can i check to see what's what? There's gotta be some simple / stupid change to a file that makes it work. Anyone have any insight?
So i have the unit on my desk playing the YouTube TV app, what can i check in the files to see why? When it first didn't work after i subscribed to the service I emailed Eonon (the place i bought the unit from) and they sent me a new firmware R16-20170509 that played the streams just fine. When i upgraded from that firmware, finding firmware here it was again broken. I've played with many settings and files but in the end thought i bricked my unit... I have since shorted Key1 Pin to Key GND top get it reading the working firmware from the USB and I'm back to where I need to be. Problem is that i want to get my newer PX5 4GB unit working cause my old R16 is kind of a pig.
Any help will be appreciated.
Additional Info:
I checked to see if the play store was "Play Protect Certified" and it wasn't but I just went to check the wording and that option is not showing up on the "working" Android Head Unit's play store settings. I think this may be where i need to focus my attention... (usually it says something like "Not play protect certified")
Thank you!
Just floating this one back to the top...
For anyone that may be having the same problem...
basically it's looking for Widevine CDM library files, i stumbled onto this thread using a magisk module that puts the files where needed and everything is working just fine...
https://forum.xda-developers.com/nexus-6/themes-apps/magisk-module-nexus-6-angler-widevine-t3781045