Related
I'm sorry to have to post this, I don't like asking for help!
I've tried searching with the term BitPool (and got nothing even though this word is in the KaiserTweek thread so that at least should have come up in the results!) and A2DP as well as several other key words on their own but have found nothing, I've searched both this forum and the main Kaiser forum, with child forum search activated. (Is the search function playing up?)
I want to try playing with my A2DP settings, I have found the registry key to edit but don't want to try random settings. I also have KaiserTweek, but although there are several options in the bitpool setting, for some reason I can only select the default and "very low" options. The others won't stick and revert back to default.
So could some kind soul either post the different settings to try in the registry, or point me to a thread (I'm sure there was one once!) that discusses the merits of the various settings. The issue I'm having is that when connected to my rSAP carkit (Nokia 610) music jumps like crazy. I've tried enabling and disabling joint audio to no effect (soft reset each time to make sure the device has updated the registry) and figured adjusting the bitpool may have some effect. Course I may also be completely wrong as music works fine when the audio isn't connected via A2DP (hard wire connection) and the phone is connected via rSAP, or when the A2DP is active, but rSAP isn't. It may just be a limitation of the bluetooth bandwidth. The solution posted in another thread or cycling bluetooth on/off doesn't work for me.
Thanks
MODS - please delete one of these double threads, or merge them. Dunno why there are two!
Hi Steve. It sounds like you are running in to the same problem as I am as described in my thread http://forum.xda-developers.com/showthread.php?t=356630.
Unfortunately I was unable to find a bitpool setting change that fixed the problem.
I'd be very curious to hear whether your skipping also coincides with cell phone tower hand-overs and whether the skipping goes away if you soft-reset your device before you connect it to your car and A2DP receiver.
It happens even when stationary, and using phone alarm too confirms that there is no cell switching going on. In fact the phone has full strength indicated so it's probably not even hunting for a better signal.
I too notice the problem is worse at night, but I don't soft reset the phone in the morning, I just connect and go. Even then I have to disable the bluetooth carkit, but in the evenings its the devil's own job getting A2DP to stream. The bluetooth dongle says its connected, the phone thinks its connected but no music comes out of either the car radio (wired to the dongle) or the phone. Bit of playing and it will either work, or I'll give up.
Actually thinking about it. You have the problem when you change cell towers, so the phone is registering with the new tower. My carkit uses rSAP (remote sim access profile) so the phone itself is effectively switched off, the carkit becomes the phone by accessing my sim and handles the cell side of things. So I think I can effectively rule out the cell tower thing.
Thanks for your reply!
Hey All,
I've done a quick and dirty search for this problem, but I haven't found anything that's exactly the same.
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
I have done the unpair/re-pair thing a couple of times, but nothing changes.
I had an HTC phone before this, and it'd reconnect automagically to my cars BT server, so I suspect it's nothing to do with the car's BT radio. I really miss that...
Thanks for any suggestions anyone might have in how to remedy this. Fwiw, I'm willing to go through a diagnostic procedure if someone would clue me in to just how to do that.
cheers,
john
I've had issues with the bluetooth and pairing. When I was on 4.2.2 (I think..) it wouldn't connect automatically at all, and I used an app to connect for me. I have a Chevrolet Cobalt and it wouldn't connect to my built in bluetooth for calls or a small bluetooth dongle that I use for playing music through the AUX input on the stock radio.
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect&hl=en
Once I was on 4.4.2 it seemed to work much better. I have no real issues now on 4.4.4. The only time I notice it not really working right is when I try to connect to the bluetooth speaker in our bathroom at home. If I turn the speaker on, it almost always connects to my girlfriends phone nearly instantly, even though I open the bluetooth menu and tap the paired device to manually initiate right when I turn on the speaker. It usually takes me a few tries to get mine to connect before hers, or I ask her to shut her bluetooth off for a moment while I connect. She uses the speaker every day because she leaves for work after me, so it only happens to me 1-2 times per month on the off chance that I want to listen to music or a baseball game in the shower, so it never really bothered me much.
I think the bluetooth radio in this phone could be better.. I never had any similar issues with my Droid X or Moto Razr Maxx so I'm not sure what the deal is...
Edit: forgot to mention I also have an XT1060, but not dev edition. My bootloader is unlocked and I am rooted, but using the official 4.4.4 VZW rom with Xposed.
I have never had any issues pairing Bluetooth - on either my car or moto 360 watch (even simultaneously).
However, I have noticed that the Bluetooth connects much quicker on custom ROMs when compared to stock.
I think tour connection issue may be a setting or rogue app related.
Sent from my Moto X using XDA Free mobile app
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
jrredho said:
Thanks to both of you for your replies!
Fwiw, things have not gotten any better since I posted my question. I'm getting more accustomed to it, though.
As for the possibility of a rogue app, yes I suppose so, but short of uninstalling everything, and adding them one by one and trying to connect to something via BT, how can someone go about debugging such a thing?
cheers,
john
Click to expand...
Click to collapse
You may need to delete the profile for the Bluetooth pairing in your car. Could be a conflict there.
Otherwise, try looking at your Bluetooth settings on the phone.
Sent from my Moto X using XDA Free mobile app
jrredho said:
...
I have an XT1060, Dev Ed, on KK 4.4.4, and I'm just wondering, am I the only one who cannot get my bluetooth radio to hook up to paired devices easily?
The problem is, I always have to ask to connect manually; this is a bit of a pain, especially after turning off my car, say, for a few seconds. Oh, it'll connect, but sometimes it takes 10-15 tries before that connection is made, and even then, it's often after I have to disconnect then attempt to reconnect a few times because it doesn't connect both the phone and media modes.
Click to expand...
Click to collapse
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
KidJoe said:
Is it *ALL* bluetooth devices, or just the car? What model and year car? Are you connecting to the Hands Free profile, Headset Profile, or doing something like A2DP for music streaming?
How long have you had the phone, how long has this been a problem? Has the symptom ever changed?
Keep in mind, just because your HTC phone connected to the car just fine, doesn't mean the car could not be the issue. While the Bluetooth profiles and protocols should be "standard" I've seen many issues of interoperability issues between bluetooth devices over the years. Especially with car kits.
Click to expand...
Click to collapse
Guys, thanks for staying with me on this. One thing I've definitely learned is that the bluetooth thing is something I'm pretty ignorant on. I can see that I'm going to have to study it a bit before too long. Gad, that HTC spoiled me rotten---at least in that way.
I haven't tried the phone with any other BT devices. This is mostly because I don't own but two, the car and a travel speaker, and I haven't had the speaker out of its case since I scored the phone six or eight weeks ago. Also, I did some housecleaning, so I have only a small fraction, maybe 20%, of the same apps on the MotoX that I had on the HTC. I have no apps on the MotoX that I didn't have on the latter.
As for some of the car-related suggestions, it's a 2015 Subaru Forester Premium 2.5i, which is really only level up from the base model of that line. I can't find that there is a bluetooth profile setting in the car that I can change; I think that it's too basic. The relevant user manual simply states the following:
Media format
Bluetooth audio devices cannot be
connected if they are not compatible with
the following Bluetooth® profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
I don't even know what either of those mean!
Anyway, what I did do is go to the phone settings, and uncheck the Media box that shows up once the car's BT server is detected. Then I try to connect with the Phone box checked. It'll still fail to connect several times, but (a) it doesn't take as long to fail to connect, (b) it doesn't take as many tries (it seems) to make the connection, and (c) when it fails, it fails totally, so I don't have to disconnect from 'Media-only Connected (No Phone)' connection. That makes it easier I suppose. Then once the connection is established, it's a simple matter to go back to settings, and check the Media box. That add-on connection happens pretty quickly, but the process is still a little overwrought, imo.
Of course, KidJoe, up until you mentioned a Headset Profile, I didn't know one existed. But when I try to play music on my phone using PowerAmp, well, the app doesn't hook up to the BT anyway. That's a key difference between the HTC and the MotoX. In PowerAmp, I have "Play over Bluetooth on Detection" selected. The headset isn't being detected at all. So maybe that goes some distance to explaining what I'm encountering.
Again thanks to both of guys for hanging in there with me! I'll keep trudging "onward through the fog," as it were...
cheers,
john
A2DP and AVRC are used for Bluetooth Stereo audio streaming (like playing Pandora on your phone via your car stereo). Not phone calls.
For phone calls, usually a Headset or Handsfree profiles are used, and sometimes BT Phone Book Access (so you can see your phone's contact names/numbers on the car's screen).
I've run into compatibility issues between some phones and some Headset/Handfree devices (mostly cars, but a few bluetooth headsets too). Often times when this happens, you're stuck. Each side will blame the other (i.e. Moto will blame the Subaru car stereo, and Subaru will blame the phone).
I have had issues re-connecting to my car (a 2011 Saab 9-4x with Bose/Nav), IF I had my Moto S11 Flex HD headset connected to my Moto X before I got in the car (even if the S11 was powered off/disconnected from the X before I started the car). Usually toggling the X's bluetooth off/on, and sometimes worst case rebooting the phone, has always fixed it.. Another time I had troubles connecting to my Saab's car kit was when my wife was using her phone to stream audio. The next time I got in the car, I had to manually connect my phone. The car always tries to connect to the the last phone used, so it was looking for my wifes and it took a while before it timed out. When it did time out, it didn't look for mine.
Since you have a 2015 Subaru, I would consider visiting your car dealer, ask them to help with pairing the phone properly, and making sure its working right. See what they have to say.
My bluetooth in my car stopped pairing the other day, and it turns out it was an app that updated and requested permissions related to bluetooth. I didn't notice them because it's an app I trust so I accepted the new permissions without really looking at it.
I used App Settings (Xposed module) to disable the permissions and my bluetooth works fine again.
I could still pair with things if I went to the bluetooth paired device list and manually tapped on the device I wanted to connect with, but it would not pair automatically (like when I got in my car). Once I disabled that permission, it started working again without issue.
May be worth a look through your installed apps to see if anything has access to bluetooth and may be interfering.
Hey All,
Thanks again for the continued help!
It's true, I didn't do any research on app interference before I posted this thread topic, but since a couple of you have brought it up, I decided to do a little research. I installed a permissions app, and took a look at the permissions that allows an app to automatically seek out, and pair with, Bluetooth servers. I have to admit, I got some surprises there. (Who would've thought that Beautiful Widgets needed that permission; it is now gone.)
Anyway, most of the remaining apps are either system/Moto-related, or ones I would really like to keep. I'll report back on what I learn. If there are other permissions that I need to reference besides the two pairing-connecting to Bluetooth ones please let me know...
cheers,
john
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Yes I'm having the same problem with my gear s2 just got off the phone with tmobile there sending me a new note 5 hopefully it will fix it I'll update after the switch
danjnoble said:
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Click to expand...
Click to collapse
hi,
i have Note5 stock Rom, no root. I also have a Gear watch (still on Android.. not Tizen, rooted, Null 23 Rom) Been using the Gear watch since launch with my then Note 3, Note 4 and now with Note5.
Overall no problems at all. Only replaced the watch battery a month back thats all.
My Bluetooth connection to all my devices has been overall, very good.
I am currently using my Gear with Note5. The Bluetooth connection is very, very good. i cannot recall it ever disconnecting from Note5. (if in acceptable distance.. +-
10 metres or so.) Overall Gear is working 100%.
Point i am making is according to my experience, Bluetooth connection with Note5 works fine... no disconnecting issues.
I know this doesn't solve your issues,
but good to know.
Good luck
I'm wondering if I may have a hardware issue. If connected to a BT device (eg gear) and I move more than a couple ft from the device connection is lost. I'm very confused with my car stereo though, what would cause BT to split and use my phones mic and the stereos speaker not the stereo mic? Anyone ever experience a similar issue?
danjnoble said:
I'm wondering if I may have a hardware issue. If connected to a BT device (eg gear) and I move more than a couple ft from the device connection is lost. I'm very confused with my car stereo though, what would cause BT to split and use my phones mic and the stereos speaker not the stereo mic? Anyone ever experience a similar issue?
Click to expand...
Click to collapse
hi,
futher i can add,
i use Note5 Bluetooth
with following devices no issues. No disconnecting issues or any other issues.
Polor M400 Bluetooth Hart rate watch( re smart notifications) ,
Jam Bluetooth headset (streaming music) ,
Phillips Bluetooth dock.( streaming music.)
My Lenovo laptop,( Sending of pics, apps etc)
and use it to connect to my other Phone devices etc
Never had any issues with disconnecting.
Given that the devices are normally
about 2 meters apart when in use sometimes 10...12 meters.
I would suggest you get you device checked, as yes it does not seem right
that it disconnects so easy (when so near)
good luck
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
danjnoble said:
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
Click to expand...
Click to collapse
hi ,
yes ,i understand, you don't want to wait for period of time ,w/o your phone. !!!
I would have maybe done some "little tests" , to get a better opinion of the Bluetooth issue ??
eg. Test your devices in environment/area where there is no interference , ( no concrete walls ,buildings ...an open area .No electric cables/towers )
An open area ,field or another locations than your home or workplace etc .
See what is you min. and max. distance on disconnection ,if it only occurs more at your home than another area .? Get some facts and maybe make a small video to illustrate your issue ?
and show it to "someone" in the know ???
eg ..If you bought phone through service provider show video to them ./Samsung ( i have a habit that when i have a issue ..........................
eg. broken roof tiles/wall socket /a damage car part ......etc etc ....
i would take photo's/video ,(with my phone and keep copy on my phone ) and when talking to "somebody" in the know/or send your device to Samsung ,show them photo's /video of issues. It helps them to understand your issues better ,
and maybe give you better advice on issue ?
Also ,try to compare you results with somebody with similar device ???
Google is your friend ???
Google around ..???
you might just learn something in process ,that can help ?
Above is basics of what i would have done .
good luck
Bluetooth firmware v 4.2 and older versions .
danjnoble said:
This might be an odd question but how would someone go about testing the phones BT, it connects just not stable. Only reason Im asking is I dont want to send it to samsung and have to wait 2-4 weeks and them to come back and say its working.
Click to expand...
Click to collapse
hi
further to my post above ,
i just want to add another issue you should be aware .
Bluetooth v 4.2 (Note5 firmware ) and compatibility issues with other Bluetooth versions 3.0 ,v 4.0 v 4.1 etc ,To give you a real life example .......
On my Gear watch i use to have Bluetooth v 3.0 ( ? )
i was using my Note 3 ( at the time ).Then my Note 3 was upgraded to Bluetooth v 4.0 ,
when i started having disconnection issues .Also in Bluetooth settings on my Note3 ,device my Gear would not show up in paired devices or stick in list .
When my Gear Bluetooth firmware was upgrade to v 4.0,
i found the disconnection issues was resolved and my Gear then showed up in pair devices
I am not saying this is the issue,
but you should be aware of what Bluetooth firmware your other devices are using ...?????
Is it Bluetooth L E ( Low Energy ) version 4.2 or v 3.0, v 4.0 ,v 4.1,
good luck
Hi again
So I got the new phone yesterday and so far everything is working perfectly no connection issues with the gear s2 it has been connected via bluetooth since yesterday afternoon when I receive the new phone
danjnoble said:
Wondering if anyone else are having issues with the bluetooth on the note 5. One issue I'm having is the connection to my galaxy gear disconnects and reconnects randomly and after a few disconnects seems like the phone just ignores the gear and manual connection only works 50% of the time other times I have to reset the phone to regain connection. Other problem Im having, which I cant figure out, is my car bluetooth stereo connects with no issue to my phone but when using calling it uses the car speakers for output audio but the phones mic for input audio. Tried my S5 and the stereo works perfectly. Any suggestions? I've tried wiping caches, unpairing repairing devices. Factory reset (which worked for about a few hours but started the same issues again). I was thinking it may be software related but no software or updates were installed between the factory reset and having issues again.
Click to expand...
Click to collapse
i've got such issues after restoring Note 5. i did reset gear to the factory settings and paired devices...
Thanks for the replies. After doing some testing and what not the only thing I can figure is a bad BT module/chip in the phone. Sent it in through my service provider today. Will post results when I gets it back. Using my old S3 for now until I gets it back, its like my phone shrunk and got sugnificantly slower lol.
update for anyone who is wondering or having the same prroblems. I got my phone back from samsung today, they replaced the main board in the phone. BT seems is working good now and the phone seems snappier than before. Thanks for the help. ☺
danjnoble said:
update for anyone who is wondering or having the same prroblems. I got my phone back from samsung today, they replaced the main board in the phone. BT seems is working good now and the phone seems snappier than before. Thanks for the help.
Click to expand...
Click to collapse
How the heck did you get your phone to/from Samsung that fast? I'm about to call TMO to get a replacement device...
rojovilla said:
How the heck did you get your phone to/from Samsung that fast? I'm about to call TMO to get a replacement device...
Click to expand...
Click to collapse
I dropped it off at telus (my service provider) and they sent it in for me. only took a couple days, I was surprised it was that fast. I live in NL, Canada and everyhting is usually slow shipping here.
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Similar problem
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
damian101 said:
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
Click to expand...
Click to collapse
I’m wondering if the Nokia 8 just has rubbish connectivity, generally. If the Bluetooth chip is part of the WiFi chip then this would figure as it has the worst WiFi connectivity I’ve seen in recent years
Are you running Nougat or Oreo? From what I've heard, a lot of the bluetooth issues have been fixed in Oreo.
leoni1980 said:
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Click to expand...
Click to collapse
I wonder if yours is wonky, my Wi-Fi is excellent and i get get 75Mbit down 19Mbit up over 5Ghz through 2 brick walls, a floor up and at the opposite end of the house, i have not missed any payments using contactless via NFC and Bluetooth works fine via an Anker Bluetooth speaker and my JBL Bluetooth headphones.
Sorry for digging an old thread, but I still have the same problem even after a bunch of software updates.
My issue with the AirPods is that they do not work after they connect. I take them out of the case, they connect (as expected), but as soon as I start playing something the music/video pauses and the sound switches to speaker (if I press play again it plays out loud). To make them work I need to go to bluetooth settings, disconnect them and connect them again. Then they will work almost flawlessy (minor intrerruption from time to time).
I have no issue with other BT speakers. I also use the AirPods with an iPad and laptop and no issues there.
My Nokia 8 software is up to date. AirPods firmware the same (checked on the iPad).
I tried re-pairing after each software update. I tried changin BT settings (absolute volume - dev settings; contact sharing and HD Audio: AAC) but no improvements.
Any ideas what else can I try?
Search for Oreo and Bluetooth problems. It seams to be a general issue for this Android Version. I have problems connecting my Phone with the car, too.
Hello, after 2 and a half years using the phone and not having big issues, just the known (red tint screen etc) and saying that the phone itself still stands good, i now have a problem. I just purchased the Creative outlier air v2 earbuds and i simply can't connect them to Nokia 8. Phone hasn't been tweaked , is stock Android 9 with the last October update. The phone discovers them i pair them, i hear the "pair successful" from the earbuds but they don't connect , instantly they appear in "Saved Earbuds" section in Bluetooth settings and the earbuds flash as they supposed to when they are disconnected from a device.
I tried pretty much everything i can find, Bluetooth on-off, developer options on-off restart, clear bluetooth app cache, clear apps settings even clear WIFI/Bluetooh cache (bye -bye wifi ssids) tried to changed the avrcp bluetooth versions to 1.4-1.6, select aptX codec etc but nothing changed. The disable bluetooth a2dp hardware offload is grayed out so i couldn't changed that, but don't know if it will make any difference.
So is there a thing i can do to make them work, tweak/re install firmware or version of bluetooth ? Or i just hit a situation that the two devices just don't go along.
Just for the record, the earbuds pair and work fine in my laptop and even in 2 Xiaomi redmi 5 i tried to.
Jam12 said:
Hello, after 2 and a half years using the phone and not having big issues, just the known (red tint screen etc) and saying that the phone itself still stands good, i now have a problem. I just purchased the Creative outlier air v2 earbuds and i simply can't connect them to Nokia 8. Phone hasn't been tweaked , is stock Android 9 with the last October update. The phone discovers them i pair them, i hear the "pair successful" from the earbuds but they don't connect , instantly they appear in "Saved Earbuds" section in Bluetooth settings and the earbuds flash as they supposed to when they are disconnected from a device.
I tried pretty much everything i can find, Bluetooth on-off, developer options on-off restart, clear bluetooth app cache, clear apps settings even clear WIFI/Bluetooh cache (bye -bye wifi ssids) tried to changed the avrcp bluetooth versions to 1.4-1.6, select aptX codec etc but nothing changed. The disable bluetooth a2dp hardware offload is grayed out so i couldn't changed that, but don't know if it will make any difference.
So is there a thing i can do to make them work, tweak/re install firmware or version of bluetooth ? Or i just hit a situation that the two devices just don't go along.
Just for the record, the earbuds pair and work fine in my laptop and even in 2 Xiaomi redmi 5 i tried to.
Click to expand...
Click to collapse
IDK if it helps, but Creative recommends to use the SXFI app (https://play.google.com/store/apps/details?id=com.creative.apps.superxfiplayer&hl).
Install this app
Create your profile
Connect the earbuds to your device
Have you tried it already?
Yeah i tried that, creative suggested some methods mentioned it this site, for different Nokia models, but it was basically what i've done already(clear apps, cache, reset phone) I've given up, the only solution is just use different phone...