Mi a2 stock recovery no command - Xiaomi Mi A2 / 6X Questions & Answers

My a2 is unlocked, critically unlocked, Google camera installed with temporary magisk root . It is now no rooted, unlocked, ota upgradeable. But it has stock recovery with no command. I have flashed stock room 9.6.10, 9.6.13 & 10.0.2, but can not fix. Pls help me how can I fix stock recovery with no command issue.

asad0181 said:
My a2 is unlocked, critically unlocked, Google camera installed with temporary magisk root . It is now no rooted, unlocked, ota upgradeable. But it has stock recovery with no command. I have flashed stock room 9.6.10, 9.6.13 & 10.0.2, but can not fix. Pls help me how can I fix stock recovery with no command issue.
Click to expand...
Click to collapse
AFAIK the stock recovery of the Mi A2 is only capable of OTA updating via Android One. If you want to do other things with it, you must install a custom recovery which should also be capable of OTA updating.

asad0181 said:
Pls help me how can I fix stock recovery with no command issue.
Click to expand...
Click to collapse
In stock recovery ("no command" displayed) press power + volume up, this will show stock recovery menu (which is IMHO nearly useless except for factory reset, which can be made from Android or fastboot too).

I have pressed power+ volume+ , but it shows no command

asad0181 said:
I have pressed power+ volume+ , but it shows no command
Click to expand...
Click to collapse
Hey man try look it up on youtube.
Its actually simple.
You need to get the technic right.
Press power button and press a quick + while holding the power button

hey my phone same dont working my screen touch dosnt working
Qyfaruxx said:
Hey man try look it up on youtube.
Its actually simple.
You need to get the technic right.
Press power button and press a quick + while holding the power button
Click to expand...
Click to collapse
hey my phone same dont working my screen touch dosnt working i can slide or touch but its dont working i was go in these settings with power button and volume up but i cants fix it

asad0181 said:
My a2 is unlocked, critically unlocked, Google camera installed with temporary magisk root . It is now no rooted, unlocked, ota upgradeable. But it has stock recovery with no command. I have flashed stock room 9.6.10, 9.6.13 & 10.0.2, but can not fix. Pls help me how can I fix stock recovery with no command issue.
Click to expand...
Click to collapse
Same issue here. In recovery mode it shows "No Command"
HOWEVER, I HAVE BEEN ABLE TO GET THE OTA UPDATE!!!
This means that the stock recovery has got wiped off. How do I get the stock recovery back?
schubeir

asad0181 said:
My a2 is unlocked, critically unlocked, Google camera installed with temporary magisk root . It is now no rooted, unlocked, ota upgradeable. But it has stock recovery with no command. I have flashed stock room 9.6.10, 9.6.13 & 10.0.2, but can not fix. Pls help me how can I fix stock recovery with no command issue.
Click to expand...
Click to collapse
Press power then immediately vol+ buttons to get into recovery menu. It's about timing you press between those buttons,. For me sometimes can take several time trial before success, in other time it enter menu immediately.

Related

reboot to recovery no command error

im on rooted 4.4, all works fine but the exchange,, trying to replace the email 4.4.2 apk, so my eschange will work, when i try to boot into recovery, i get "no command error"
can anyone plese help?
ericizzy1 said:
im on rooted 4.4, all works fine but the exchange,, trying to replace the email 4.4.2 apk, so my eschange will work, when i try to boot into recovery, i get "no command error"
can anyone plese help?
Click to expand...
Click to collapse
what are you using to reboot into recovery?
here's the failsafe way to access recovery:
power off the phone, press and hold volume down + power for a few seconds then release to access bootloader menu. press volume down to highlight recovery, then volume up to select it.
Q9Nap said:
what are you using to reboot into recovery?
here's the failsafe way to access recovery:
power off the phone, press and hold volume down + power for a few seconds then release to access bootloader menu. press volume down to highlight recovery, then volume up to select it.
Click to expand...
Click to collapse
thats exactly what i did and still got the error. even tried with adb, no luck
ericizzy1 said:
thats exactly what i did and still got the error. even tried with adb, no luck
Click to expand...
Click to collapse
strange, are you unlocked and using twrp/cwm or locked and using slapmymoto? if you're unlocked, i'd recommend reflashing twrp/cwm recovery image, sounds like it may be corrupt. if you're locked, i can't help as i haven't messed with any of the locked device stuff.
im on a locked device, used slapmymoto, thanks for trying,can anyone else help?
Why do you need to be in recovery. You should have write protect off already. If you are trying to flash something you can't without safestrap and the zip needs yo be made for safestrap. Just manually move the emails and change the permissions
Sent from my XT1060 using xda app-developers app
Press Power + Volume Up at the same time when it shows "no command" (And if that doesn't work try Power + Volume Down )
ericizzy1 said:
im on a locked device, used slapmymoto, thanks for trying,can anyone else help?
Click to expand...
Click to collapse
If the button presses while rebooting to get to where you can select recovery doesn't work... You could try Quick Reboot -> https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot to reboot into recovery, or open a command prompt on your PC.. and issue the command.. adb reboot bootloader then pick recovery from there.. If those ways also error with that same message you are seeing now, then your phone doesn't has a problem with its recovery partition.
As others have said, if you are rooted with Write Protection disabled (SlapMyMoto v1 thread tells you to run MotoWPNoMo first, to disable write protection, then follow its process), you should be able to go in, rename the old APK, and replace it with the new one (and set the attributes the same) without needing to be in recovery.
Then again, if you rooted with SlapMyMoto .5 (before the MotoWPNoMo was available), or you never did the MotoWPNoMo process that would explain why you want recovery... you're trying to boot to "recovery" so that you can boot with the Write Protection disabled so you can make this change.
ericizzy1 said:
im on a locked device, used slapmymoto, thanks for trying,can anyone else help?
Click to expand...
Click to collapse
Power off your Moto X
Next, boot into bootloader mode by holding Volume Down and Power
At the bootloader screen, use Volume Down and scroll to Recovery, then press Volume Up to select it
Once you rebooted into recovery mode you will see No Command. Hold Volume Up and press Power to show the recovery menu
apm_ said:
Power off your Moto X
Next, boot into bootloader mode by holding Volume Down and Power
At the bootloader screen, use Volume Down and scroll to Recovery, then press Volume Up to select it
Once you rebooted into recovery mode you will see No Command. Hold Volume Up and press Power to show the recovery menu
Click to expand...
Click to collapse
That almost didn't work for me, till it did.
I was holding down volume up first, and about half a second to a second later the power button (while not having released volume up button). That didn't work.
I pressed both buttons exactly together, and it worked.

[SOLVED][Help] Installing stock recovery causing problems

Hi,
I'm very new to rooting and such and only followed guides a read forum posts to get to where I am now.
My phone is rooted with stock ROM and SU, the bootloader is unlocked but no S-OFF (don't think it's possible on the mini 2 yet anyway). The new OTA update last night installed when I got home and charged my phone, then the phone just shut off and every time I tried to boot it would go straight into TWRP without showing splash screen or bootloader (even when holding power and the volume down button). When it's in this state the touch screen doesn't work and the power button only locks the phone. Holding power + vol down in this state doesn't do anything.
I have to let the power drain completely to get the phone to boot back up but it immediately boots back into recovery and then I can use ADB to force the bootloader to appear, but when I flashed the stock recovery that I found in these boards, it messes up the screen and all it shows is static with some artifacts. I have to let the power drain again to get back into the bootloader, and from the bootloader I can get the android OS to boot but I'd like to fix this completely.
I guess I should also mention that even after flashing the stock recovery the phone will still boot back into TWRP after I let the power drain so I think that means that the stock recovery isn't taking?
The twrp problem you mentioned is known, hope it'll be fixed soon. Are you sure you typed the right command to flash stock recovery? Fastboot flash recovery recovery.img?
If you get stuck, the combination is power button and volume up, not volume down...
gibihr said:
The twrp problem you mentioned is known, hope it'll be fixed soon. Are you sure you typed the right command to flash stock recovery? Fastboot flash recovery recovery.img?
If you get stuck, the combination is power button and volume up, not volume down...
Click to expand...
Click to collapse
Unfortunately I was using the wrong ADB command, I was typing "fastboot boot recovery.img". This seems to have fixed the problem so far but I have yet to try rewriting TWRP back to the phone and I probably won't until theres a fix or unless I need to.
Thank you for your help.
Fierfly said:
Unfortunately I was using the wrong ADB command, I was typing "fastboot boot recovery.img". This seems to have fixed the problem so far but I have yet to try rewriting TWRP back to the phone and I probably won't until theres a fix or unless I need to.
Thank you for your help.
Click to expand...
Click to collapse
I had the same problem. It happens when I reboot with my phone when charging.
You can reboot your phone by holding vol up+power button.

[Q] Crashed after lolipop update

Hi,
I recently installed the lolipop update and while it was updating it crashed,the error sign came up.
Since then the phone keeps rebooting. i tried to enter the boot menu by pressing the power button and the volume buttom.
All the functions there do not work.
How do i go about it ?
Prashant
+255688660750
iprashd said:
Hi,
I recently installed the lolipop update and while it was updating it crashed,the error sign came up.
Since then the phone keeps rebooting. i tried to enter the boot menu by pressing the power button and the volume buttom.
All the functions there do not work.
How do i go about it ?
Prashant
+255688660750
Click to expand...
Click to collapse
Device is stock or rooted? If rooted do you have a custom Rom and/or recovery? You need a stock Rom and recovery for OTA updates.
Danny201281 said:
Device is stock or rooted? If rooted do you have a custom Rom and/or recovery? You need a stock Rom and recovery for OTA updates.
Click to expand...
Click to collapse
Hi
my phone is stock, tried to unlock using htcdev but can see it on my terminal / cmd ?

Cant open recovery, flashboot bootloader, etc. PLS HELP !!!!

Hey,
I was trying to flash my stock rom back from the unofficial lollipop, while doing so , I was trying to open my bootloader and all. the bootloader and recovery didnt open. i tried opening it using adb i opened bootloader but it had no options. i opened recovery using adb, it displayed a dead android in blue color :\ , i earlier had philz recovery. i tried flashing recovery again, but the problem still persists.
Please Help me out.
Thanks in advance
solution
After the dead blue android image ......press power button and volume up button respectively then release immediately ... Then you can access recovery....
learnAdithya said:
After the dead blue android image ......press power button and volume up button respectively then release immediately ... Then you can access recovery....
Click to expand...
Click to collapse
WOAH!!! Thanks Matey. What is this problem by the way?
re
it's just a key combination to enter into recovery ...

[Q] stuck in bootloop and touch not working

I flashed resurrection rom on my moto g 2014 successfully but the touchscreen stopped functioning. Then again i flashed back stock rom and now my phone is stuck in 'bootloader unlocked' screen and even the touch is not working. I can open the recovery menu but cant do anything coz touch is not working. I am stuck please someone help guys
udyannk5 said:
I flashed resurrection rom on my moto g 2014 successfully but the touchscreen stopped functioning. Then again i flashed back stock rom and now my phone is stuck in 'bootloader unlocked' screen and even the touch is not working. I can open the recovery menu but cant do anything coz touch is not working. I am stuck please someone help guys
Click to expand...
Click to collapse
Go to fastboot mode by press and holding power and vol down and and reflash stock lollipop rom with correct commands and it should work ..!
dj krishna said:
Go to fastboot mode by press and holding power and vol down and and reflash stock lollipop rom with correct commands and it should work ..!
Click to expand...
Click to collapse
i did that but stuck in bootloader. I cannot wipe data by recovery as touch is not working. and i ried to flask stock again bt it is also not installing.. is it a kernel problem??
dj krishna said:
Go to fastboot mode by press and holding power and vol down and and reflash stock lollipop rom with correct commands and it should work ..!
Click to expand...
Click to collapse
thanks a lot. I re flashed kitkat and its working now
udyannk5 said:
i did that but stuck in bootloader. I cannot wipe data by recovery as touch is not working. and i ried to flask stock again bt it is also not installing.. is it a kernel problem??
Click to expand...
Click to collapse
Nope not a kernel problem ..
Make sure you are entering correct commands and you're flashing the correct zip for your model and try again it shouldn't happen coz it is stock their will be no problem..!! Make sure you're flashing the correct zip ...

Categories

Resources