Hello! I know, I know. There are a lot of different threads according to this problem but I read almost everything and still cannot fix my problem.
A few weeks ago when I tried to charge my phone the message: Your cable is not compatible with your device. Please use the orginal HTC-cable or your phone get damaged. appeared.
until that moment I thought it doesnt matter if I use a htc cable or a cable from another brand. I mean they changed all the ports to a micro-usb-port. Just to give you the opportunity to use every cable.
Well, after that I tried to connect my phone with my computer and the HTC Car app appeared and bluetooth got switched on. WHY?
I did a factory reset and flashed my rom again. Now I can connect my HTC One with my computer and on the screen of my computer appears the message:
"Device not recognized "Windows has stopped this device because it has reported problems. (Code 43)"
(and its unable to mount otg-usb in recovery)
I tried different cables. I tried to (un)install and update the HTC drivers. I tried different computer. I tried turning usb debugging off and on! I tried to clean the USB-pins! nothing works! :crying:
(Unfortunately I have no old backup with my new TWRP v2.6.)
I just have been abroad for 6 months and dont wanna loose all my photos and videos. Any ideas?
I think its a software issue on my phones. Maybe something with my partitions. But I dunno what I can wipe without deleting all my photos and videos.
THANKS
Why the repost? http://forum.xda-developers.com/showthread.php?t=2677823
Suggestions already provided.
cause I have still no solution. I know that I could upload 32GB. im pretty sure somebody could help me to solve the problem with error 43
So I don't know if its already been made for Sony Xperia Z1, Currently on CM12.1 and cannot flash back to Stock main reason is for some reason my USB isn't reading the USB Debugging on CM12.1 ADB Debugging.
I was wondering if anyone can help Windows is giving me the Cannot recognize device problem. I uninstalled all of the Usb drivers and reinstalled them still having same issues. I was wondering if there is a need to modify the .ini file for ADB.
If anyone can answer me that would be great.
P.S I'm still new to this sorry for my noobness
PSS I was an idiot it works fine.... Solved
Hello, please help, yesterday the phone came Chinese installed magisk, I stupid clicked to update it and that's it, eternal download, downloaded the last Chinese one, cleared everything that was needed and not needed (and tried to update through otg, but it doesn’t see the flash drive, even through the computer He did a lot of things and to no avail, usb did not turn on debugging on the smartphone, did not have time, and now I don’t know how to turn it on through recovery, please help anyone than can!
Thank you so much in advance!
John.Testosterone said:
Hello, please help, yesterday the phone came Chinese installed magisk, I stupid clicked to update it and that's it, eternal download, downloaded the last Chinese one, cleared everything that was needed and not needed (and tried to update through otg, but it doesn’t see the flash drive, even through the computer He did a lot of things and to no avail, usb did not turn on debugging on the smartphone, did not have time, and now I don’t know how to turn it on through recovery, please help anyone than can!
Thank you so much in advance!
Click to expand...
Click to collapse
Post incomprehensible.
Recently I noticed that my MI A2 couldn't connect to PC in MTP to backup some photos. This didn't happened before because I was successfully flash Havoc OS and did backup photos several times ago.
I also tried to connect my phone while in TWRP but it didn't detected in Windows. I checked Device Manager while trying to connect the phone to PC there is no Android Phone device popped up like usual.
What I have tried:
- Re-flash the ROM (didn't work)
- Change the cable (didn't work even with the original cable included with the phone)
- Change to other PC (didn't work)
- Enable USB debugging (didn't work)
Additional Note:
- MIA2 in HavocOS 2.8 latest build [Android Pie]
- Windows 10 Build 1903 latest update
- Xiaomi Driver is installed as I frequently flashing my phone.
- Somehow Headphone still working using Type-C Adapter to 3.5mm
UPDATE (5/1/2021)
Hi All,
Just want to give you quick update on what happened to my MI A2 at the moment.
After looking for a fix in several month and no solution found at all, I bought a new port connector.
I tried to swapped the port myself but the problem still exist with the new port.
I even tried to use port connector for Redmi 6X (its similar but have a slight different) and yet the problem still there.
My final conclusion that this problem may be located on its mainboard. Now I have change my phone to Mi 9T Pro and put the MI A2 on my desk drawer. The phone still works and charging normally but I can't use it for work because I need it to able connect to PC.
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
egantz09 said:
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
Click to expand...
Click to collapse
I just noticed this recently. The weird part is the headphone still works using adapter type-C to 3.5mm so I doubt it was physical problem with the port more like software thing.
same too
mark.dx said:
Recently I noticed that my MI A2 couldn't connect to PC in MTP to backup some photos. This didn't happened before because I was successfully flash Havoc OS and did backup photos several times ago.
I also tried to connect my phone while in TWRP but it didn't detected in Windows. I checked Device Manager while trying to connect the phone to PC there is no Android Phone device popped up like usual.
What I have tried:
- Re-flash the ROM (didn't work)
- Change the cable (didn't work even with the original cable included with the phone)
- Change to other PC (didn't work)
- Enable USB debugging (didn't work)
I suspect it may have something to do with the firmware but I haven't find any solution for this. Hope somebody can give me some suggestion about it.
Additional Note:
- MIA2 in HavocOS 2.8 latest build [Android Pie]
- Windows 10 Build 1903 latest update
- Xiaomi Driver is installed as I frequently flashing my phone.
- Somehow Headphone still working using Type-C Adapter to 3.5mm
Click to expand...
Click to collapse
i got same issue, its after update with build v10.0.13. before that version usb working fine, when i attach usb cable its can show usb option. now its only show grey (all disable). i think its bug in rom
I had this issue as well but after trying other ports it worked for me. The strange thing is that, the previous known failed ports will always not allow me to use MTP after PC reboots.
My PC is a Ryzen build if that of any help. I do not face this issue with my laptop which is an Intel build.
TechnoSparks said:
I had this issue as well but after trying other ports it worked for me. The strange thing is that, the previous known failed ports will always not allow me to use MTP after PC reboots.
My PC is a Ryzen build if that of any help. I do not face this issue with my laptop which is an Intel build.
Click to expand...
Click to collapse
My PC is also Ryzen but it wont detect in any port, also in my old laptop which is USB Port 2.0 and have Intel processor didn't work either like it used to be.
mark.dx said:
My PC is also Ryzen but it wont detect in any port, also in my old laptop which is USB Port 2.0 and have Intel processor didn't work either like it used to be.
Click to expand...
Click to collapse
I think it is worth trying to connect USB OTG and see if it works. I am curious about it.
It may also be possible that your ROM or maybe something along the way have made this issue. But hey this is just a guess. I am just as clueless [emoji853]
Maybe i would try
• Flash stock partitions except boot & system
• Format Data
• Revert back to stock (not really a [desirable] solution)
TechnoSparks said:
I think it is worth trying to connect USB OTG and see if it works. I am curious about it.
It may also be possible that your ROM or maybe something along the way have made this issue. But hey this is just a guess. I am just as clueless [emoji853]
Maybe i would try
• Flash stock partitions except boot & system
• Format Data
• Revert back to stock (not really a [desirable] solution)
Click to expand...
Click to collapse
I can't do flash at moment because I need to make backup in case of failure. This is my daily driver phone so there is important messages, photos etc.
egantz09 said:
I had the same issue with stock pie, replacing the usb sub-board didn't solve anything, I'm still looking for a solution.
Click to expand...
Click to collapse
The problem ia in the main board i used to bring my device to service centwr they change main board, if u noticed qc charger is not working and otg didnt qork as well
Shotg1 said:
The problem ia in the main board i used to bring my device to service centwr they change main board, if u noticed qc charger is not working and otg didnt qork as well
Click to expand...
Click to collapse
Slightly off-topic, does locking the BL and flash the stock ROM enough for the warranty to be "valid"?
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
mark.dx said:
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
Click to expand...
Click to collapse
Its issue of main board
mark.dx said:
does anybody using custom kernel have this issue ? I'm thinking to flash Hex kernel might solve the issue
Click to expand...
Click to collapse
Did you already clean your usb port?
You can carefully do that with a toothpick or something.
Sounds a little silly, but really there could be a lot of dirt in there. Resolved many connection and charging issues that way already.
Phil_Smith said:
Did you already clean your usb port?
You can carefully do that with a toothpick or something.
Sounds a little silly, but really there could be a lot of dirt in there. Resolved many connection and charging issues that way already.
Click to expand...
Click to collapse
Hi thanks for the suggestion but the port look clean to me. I borrowed my brother Pocophone charger somehow it keeps on off with the charge, but when i used mine its fine
It is not a hardware issue it is a kernel issue...upon boot a "chargeonlymode" file is created in sbin folder... I am a rookie at this but after a month of digging, 2 mia2's and 4 charger modules later, something is focing our phone into chargeonlymode. If i can find the solution I will post it
sparkplug619 said:
It is not a hardware issue it is a kernel issue...upon boot a "chargeonlymode" file is created in sbin folder... I am a rookie at this but after a month of digging, 2 mia2's and 4 charger modules later, something is focing our phone into chargeonlymode. If i can find the solution I will post it
Click to expand...
Click to collapse
I'm thinking to flash Hex Kernel to my phone but I still afraid it will bootloop.
Have you been able to solve the problem?
The same thing happens on my MI MIX 2S.
kof97 said:
Have you been able to solve the problem?
The same thing happens on my MI MIX 2S.
Click to expand...
Click to collapse
Hi, unfortunately no up until now.
I'm still using my phone just fine though but I still cannot connect it to PC.
I have the same problem but the file transfer works and the charge does not, I can't get back to stock because arb4 is active now is a mi 6x
Hello,
this is my first thread/post on this forum, if I did anything wrong please don't be super harsh and inform me to what to do better, thanks.
So why am I asking for help anyways you may ask, well I had my old Xperia Z1 laying around here for quite a while now and wondered if I could do anything productive with it.
So I came up with the idea to install a CFW like Lineage OS or something else.
This is not my first rooted and cfw phone but the first one what gives me nightmares and a headache.
So after reading all of the nice guides how to root it and how to unlock it, nothing of them is working for me, most of the threads have missing files which I cannot find on google or other just simply won't work for me.
First of all, I have rooted my phone via KingRoot in the meantime since the other methods where not working either.
I have turned on usb-debugging and also allowed installation from unknown sources.
And there we start with the first problem, downloaded the google SDK and installed all adb things I needed, did not work, then I tried it from the official sony website, downloaded the usb-driver folder and tried to install it manually, won't work either, because the device manager always gave me error code 10 "device cannot be started", I tried different sources and even die google studio thing and everything ended up with the same result.
Same error code even when I tried to activate fastboot on my phone by pressing down the volume up button, pluging the usb cable in, and yet again the same error message for this device too.
I am using windows 10 and never had such problems before with sony devices.
I hope someone of you can help me out to find a solution, if you need any further information, just let me know.
Did you solve this?
I have the same problem
snailer said:
Did you solve this?
I have the same problem
Click to expand...
Click to collapse
This may sound stupid or ridiculous, but yes I managed to work it out and was able to install the CWF on my phone which is working perfectly fine.
Since nobody was willing to help me I just skipped the part where I wanted to post my solution but yeah, this may help you too.
So what did I do? Simply I stopped using Windows 10 for this project, I just used one of my older PC's which still had Windows 7 Ultimate on it.
I just rooted the phone via KingRoot, since it was the only solution what kinda worked out for me, then I was able to install all needed SDK, fastboot and ADB files on my PC and was able to use the ones from the Sony site itself this time and after plugin in the phone to the PC, it installed everything else what was needed for the device manager.
After that was done with no error I was finally able to unlock the phone via the command which you can find also on the Sony website.
If you find this helpful or need any extra information just let me know, maybe I can help you then. Oh and if you found out a solution for you what worked, would be nice to hear that too.
Greetz