Database Develop

[ROM][JB4.2.2] Lenovo IdeaTab A3000-H Call - A3000_A422_011_022_140127_WW_CALL_FUSE

NOTE : These Firmwares developed by Lenovo, not me.
I am just helping people to take advantage from their Lenovo A3000-H by Giving small guides and resources.
Click to expand...
Click to collapse
Here is the Lenovo A3000-H Android 4.2.2 Firmware With the Calling Option..
Flash Tool Inside the RAR Archive (If not found inside rar Archive, Just download it separately from Download Section)
Click to expand...
Click to collapse
Here is a Small Guide How To Install the Firmware (I assume you already Installed the Lenovo Drivers
- See Download Section For Drivers)
Click to expand...
Click to collapse
** Short note to Install Drivers Quickly, Download the drivers package and extract it into a new folder in your desktop, open device manager and wait..
- then switch off the tab, connect the cable to your computer and tab, device manager will show a new device something like MT65xx,
- right click it and click " Update Driver Software, then select " Browse from My Computer " and Select the extracted Driver folder from your desktop, Click Next..
- It will Install Drivers, If any confirmations asking " Do You Want to Continue " or " Do You Want to Install " Just click " YES "
- For Windows 8 and 8.1, You must restart your PC in Driver Signature Enforcement Mode (Search on Internet how to Disable Driver Signature Enforcement in Windows 8). After Booting into that Mode, Follow above Instructions.
WARNING : DO NOT TOUCH THE OPTION " FORMAT " IN THE FLASH TOOL.
IF YOU FORMAT YOU WILL LOSE YOUR TAB's IMEI NUMBER & WIFI MAC ADDRESS.
Click to expand...
Click to collapse
IMPORTANT : BEFORE YOU PLAY AROUND, IT IS BETTER YOU TAKE A BACKUP OF YOUR " NVRAM " FOLDER FROM ROOT ==>> data ==>> nvram
COPY THE COMPLETE " nvram " FOLDER TO YOUR SD CARD AND KEEP A COPY IN YOUR PC.
THIS nvram FOLDER CONTAINS YOUR IMEI, WIFI MAC, SERIAL NUMBER AND OTHER IMPORTANT DATA.
Click to expand...
Click to collapse
1. Unpack the RAR archive to Somewhere in Your Computer (Me Extracted to a Folder in Desktop)
(You will find 4 Folders Inside the rar Named : modemdb, SP_Flash_Tool_NEW, SP_Flash_Tool_OLD, target_bin)
- Some Firmwares does not contain all the folders. So don't worry about that, Just the Important folder is target_bin.
2. Open " SP_Flash_Tool_OLD " Folder, There You Will Find a Blue Icon, Flash_tool.exe file
3. Double Click Flash_tool.exe (If you are using windows Vista/ 7/ 8/ 8.1 Right Click the Flash_tool.exe and Run As Administrator.
4. Then the Flashtool will Open up.. There you can Find Lots of Options.. Be careful, Do not Click any other Options until u get a knowledge about that, otherwise your Device will be Ruined..
5. Now Click the " Scatter-loading " In the Top Right Corner of the Tool, then Navigate to the Extracted Firmware Folder, and goto the target_bin, there you will find a file named " MT6589_Android_scatter_emmc.txt " Select that file and Click " Open "
6. Make Sure " DA DL All with check sum " option is Ticked
** NOTE : If " FAC " is not selected, please tick the FAC option and click on the name " FAC " it will give you file explorer to select the FAC file
then select " FAC.img " file from the firmware folder. (This only applicable for A3000_A422_* and later firmwares)
7. Now Switch off the tablet, wait for 15 seconds And Prepare the USB cable, And Click " DOWNLOAD " (in case if you get any error messages when you click DOWNLOAD, then Please Click " FIRMWARE->UPGRADE " option) then wait 5 Seconds and Connect the USB cable to the Tablet. It will Start Flashing. A yellow Bar will appear, It will take 3 to 5 Minutes to Finish the flash Operation. Do not Disconnect until that. Finally A small Green Round Box Appear, That means Everything Success.. Now Disconnect the Cable and Start the Tablet
It will take Few Minutes to start the Tablet First time, So wait Patiently. After Start It will ask you to select the language, Select English or any language you want.. and Configre time and Everything.. Thats all.
Click to expand...
Click to collapse
VIDEO TUTORIAL :
Click to expand...
Click to collapse
DOWNLOADS
Click to expand...
Click to collapse
Android 4.2.2 Latest Firmware With All Languages & FUSE Partition
A3000_A422_011_022_140127_WW_CALL_FUSE
Firmware Released on 27th January 2014..
CLICK HERE TO DOWNLOAD A3000_A422_011_022_140127_WW_CALL_FUSE FIRMWARE
انقر هنا لتحميل أحدث البرامج الثابتة حزمة.
Click to expand...
Click to collapse
OTHER (OLD) DOWNLOADS - IN THE FOLDER (FOR ADVANCED USERS ONLY )
CLICK HERE TO OPEN THE DOWNLOADS FOLDER!
Click to expand...
Click to collapse
UPDATED Drivers (23rd February 2014) (Flash and ADB) : http://www.mediafire.com/download/juzwauwy9rx9yw6/Drivers_v1.2.zip
Click to expand...
Click to collapse
Latest Flash Tool : http://www.mediafire.com/download/k0lpbxp5fmuvpzu/SP_Flash_Tool_exe_v3.1328.0.183.zip
.

Recovery and Gapps
TWRP Recovery and Gapps (OPTIONAL - ONLY FOR ADVANCED USERS )
Click to expand...
Click to collapse
** RECOVERY INSTALLATION ALSO SAME LIKE INSTALLING FIRMWARE. JUST LOAD THE SCATTER FILE FROM THE RECOVERY PACKAGE AND HIT DOWNLOAD! IF ANY WARNINGS APPEARS, JUST IGNORE THEM!
Install this TWRP RECOVERY ONLY If You are Running " A3000_A422_000_006_130517_WW_CALL " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A422_000_006_130517_WW_CALL " FIRMWARE
Click to expand...
Click to collapse
Install this TWRP RECOVERY ONLY If You are Running " A3000_A421_000_029_130327_CN_3G " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A421_000_029_130327_CN_3G " FIRMWARE
Click to expand...
Click to collapse
Install This GAPPS after Installing " A3000_A421_000_029_130327_CN_3G " Firmware and Recovery..
** Put the GAPPS Package on a Memory card and Install through TWRP Recovery
CLICK HERE TO DOWNLOAD GAPPS FOR A421
Click to expand...
Click to collapse
Use framroot to root your tab.
Download : CLICK HERE TO DOWNLOAD FRAMROOT 1.6.0 APK
Click to expand...
Click to collapse
Check here How to Install GAPPS manually using Root Explorer..
Note : Your Tab must be rooted before Install the Gapps manually..
Extract the gapps zip package somewhere in your memory card using computer before copy.
Click to expand...
Click to collapse
Some Screenshots!

Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?

MrBeck said:
Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?
Click to expand...
Click to collapse
It Includes 1GB for Apps and 12GB For Files

Lenovo drivers
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?

bedrock0220 said:
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?
Click to expand...
Click to collapse
Download the drivers package, extract it to the desktop. Then Open flash tool and Initialize the flashing procedure, then hit download and connect the tablet to the pc, it will ask to install drivers, if not then goto device manager, u can see there your device right click it and click update drivers, then give the extracted location of the drivers. it will install.

Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?

lenovo a3000
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.

jazmy said:
Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?
Click to expand...
Click to collapse
After Turning off the tablet, it is better you wait few seconds before connecting to pc for flashing.
You Should not Connect the Cable to the tablet Before 7th Stage, All previous points should be done WITHOUT CONNECTING USB to PC.
You Should connect the Cable after You Click the Button " DOWNLOAD "

bedrock0220 said:
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.
Click to expand...
Click to collapse
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?

bedrock0220 said:
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?
Click to expand...
Click to collapse
Can you check the device manager after connecting the tab to pc??? see is there any un installed drivers left there or not..

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?

azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
I didn't try it yet but maybe bedrock0220 has different Jellybean version !!

check the screenshot of my tab maybe it will help...TY

bedrock0220 said:
check the screenshot of my tab maybe it will help...TY
Click to expand...
Click to collapse
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?

bedrock0220 said:
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
[/COLOR]
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?
Click to expand...
Click to collapse
Try the Drivers From Next Post, Download it, Extract it then double click install.bat it will install Drivers. Then try to flash.
Your tab should be always off when you do flash operations (Install flash drivers, flash new firmware etc) by connecting the USB cable

New usb flash driver!
NEW USB FLASH DRIVER!
Try to Install this Driver and Flash... :good:

bedrock0220 said:
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?
Click to expand...
Click to collapse
I am Busy today, Inshaallah tomorrow i will try to Make a Video Tutorial for Install Drivers, firmware etc..

Firmware upgrade
Hi.....We need to press "Download" or "Firmware-Upgrade". If I press "Download", I am getting message to press "Firmware-Upgrade".
Thanks,

How To Unbricked A Hard Bricked Phone [ Moto X ]

How To UnBrick A Hard Bricked Moto X​
Hii , First of all I wanna thanks to this awesome scrpit by @s5610 who brought my phone from dead to alive , I think i am the first guy to unbricked the hardbricked phone using this script lol , My phone was hardbricked because i was testing my kernel and entered wrong path in partition due to which i got hard bricked i was worried for my phone , Service Center was asking for 7k in Indian Rupees , i was hopeless then i gave a try to this method , followed all steps written here and then finally i entered to fastboot menu of 30.B7 Kitkat As i was using 30.B7 Bootloader earlier and then i flashed My gpt.bin and S-partition and flashed my stock rom voilla !! and my phone booted the aim was to share this post was this method was on page 42 and only less guys have seen this post , so i created a new thread regarding this
All Credits Goes to - @s5610​
s5610 said:
Unbricking Guide for any Moto X Gen 1 (wire trick)​
Download, and unpack supplied zip to any disk, C: or D:, in root folder. Install driver by launching Qusb.drv.inst.msi, then open Windows' Device Manager, and see if you got "Qualcomm HS-USB QDLoader 9008" device (it is "QHSUSB_DLOAD" without driver installed) located in "COM & LPT ports" section.
If yes, you see it, go to software part below. If it's not there, a full disassemble of the phone is needed to get close to back side of motherboard (google for "iFixit Teardown Moto X Guide" for step-by-step instruction).
So, when you are inside, disconnect the battery first. No need to pull it out, it's glued. Now get to back side of motherboard, and very very gently gain access to the lower left corner of ARM+DRAM shield (see picture). I've done it with Stanley knife. Also you can use miniature nippers - but very carefuly! Once you get access to inner space of shield, use tiny wire to short special pin to the ground (see picture), then connect USB cable, and in the moment when you see "QHSUSB_DLOAD" device (or "Qualcomm HS-USB QDLoader 9008" if driver is installed) pop out in Windows' Device Manager, quickly remove the wire. The goal is to have "Qualcomm HS-USB QDLoader 9008" in "COM & LPT ports" section of Device Manager. If it is achieved, we are done with hardware, and move on to soft part.
Now software part. Go to unzipped C:\Python27 folder, launch bat-file, and wait until finish:
RUN_blank_bootloader_flash.bat
(if you got error like "No data read from USB..." etc, just skip to next step)
Next launch either
- .Boot_KK_4.4.2_B4.exe,
or .Boot_KK_4.4.4_B7.exe,
or .Boot_LP_5.0.2_BC.exe,
or .Boot_LP_5.1.0_BD.exe,
or .Boot_LP_5.1.0_BE.exe
- depends on Android version your phone has last time. If you don't know what you need, begin with first one.
Wait 10 seconds, then launch next bat-file, and wait until finish:
RUN_moto_x_bootloader_flash.bat
Phone should go into fastboot mode! If it doesn't, repeat previous step trying higher version. But don't try to flash BC, BD, and BE, if you didn't install Lollipop on this phone!
OK. Disconnect the USB cable, connect the battery, connect again USB cable (fastboot don't work, if don't see battery). Launch next bat-file:
RUN_gpt.bin_flash.bat
The phone will get in fastboot, ready to be flashed by appropriate firmware. If it is official RSD (SBF), delete from xml strings consisting gpt.bin and motoboot.img for safe flashing.
...
Download link: http://www.mediafire.com/download/3e38rr3wy28s071/Moto.X.Unbrick.zip
This guide was brought to you by s5610
Links that this guide is based on (where I took files and general idea):
http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
http://forum.xda-developers.com/mot...-moto-x-t2629057[/url[/QUOTE][/QUOTE][/QUOTE]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Not sure if additional thread is necessary )
UPDATED
The best resurrection method for Moto X is here.

Can Someone re-upload that file? Thanx!

Please upload the mediafire link...
Plz plz.. I have bricked my phone. It seems that this procedure will work for me. Please upload and save my life.

even i have bricked my moto x...need a working download link..please.

https://drive.google.com/file/d/0B3EDzuzDCakzdWxHa2RWVDJhRXc/view?usp=sharing

Cannot install qsub.drv.inst.msi on my windows 10...says failed to attribute and failed to delete qcusbser.sys.

Thanks

Can we write the full firmware through Qload 9008 mode ???

HI I have a question. I bricked my gf's phone while trying to unlock the bootloader and I am not able to turn the phone on. Only positive feedback is that when I plug it in to the computer, I can hear a notification on my computer. I followed your guide. I can see the "Qualcomm HS-USB QDLoader 9008" device (it is "QHSUSB_DLOAD" without driver installed) located in "COM & LPT ports" section.
Then I followed your software instructions. When I run the RUN_blank_bootloader_flash.bat, I get the following
Code:
Starting qflash!
Executing command qflash.exe -com3 -ramload MPRG8960.hex -mbn 33 MSM8960_bootloa
der_singleimage.bin -v -o
Motorola qflash Utility version 1.3
qflash - com3 is an invalid port
Invalid COM port enteredBlank flashing successful
Device will now enumerate in fastboot mode
Then, I followed the rest of the instructions by trying each .Boot .exe and waitng 10 seconds and finally with RUN_moto_x_bootloader_flash
but I am getting the following error.
Code:
C:\Users\cxx\Desktop\Python27>python qdload.py MPRG8960.bin -ptf _boot\partiti
ons.txt -pt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com3
Traceback (most recent call last):
File "qdload.py", line 815, in <module>
main()
File "qdload.py", line 762, in main
tty = openTTY(args.ttyPort)
File "qdload.py", line 174, in openTTY
tty = serial.Serial(port=tty_path, baudrate=115200)
File "C:\Python27\lib\site-packages\serial\serialwin32.py", line 38, in __init
__
SerialBase.__init__(self, *args, **kwargs)
File "C:\Python27\lib\site-packages\serial\serialutil.py", line 282, in __init
__
self.open()
File "C:\Python27\lib\site-packages\serial\serialwin32.py", line 66, in open
raise SerialException("could not open port %r: %r" % (self.portstr, ctypes.W
inError()))
serial.serialutil.SerialException: could not open port 'com3': WindowsError(2, '
The system cannot find the file specified.')
C:\Users\cxx\Desktop\Python27>pause
Press any key to continue . . .
please help.
Thanks.

Device Shows As USB Input
Hey all,
I'm having trouble getting my Windows 7 machine to recognize my XT862 as a QHSUSB device. Windows does recognize it, just as a "USB Input Device" -- very generic, I know -- so I don't think I have to do any motherboard hacks (and I sure hope not!). However, as it won't let me update the driver either, so I can't do anything. Also, when I plug it into my Mac, it does pop up as a Qualcomm Composite Device. Since something's obviously still ticking, where did I go wrong?
Thanks

shengslogar said:
Hey all,
I'm having trouble getting my Windows 7 machine to recognize my XT862 as a QHSUSB device. Windows does recognize it, just as a "USB Input Device" -- very generic, I know -- so I don't think I have to do any motherboard hacks (and I sure hope not!). However, as it won't let me update the driver either, so I can't do anything. Also, when I plug it into my Mac, it does pop up as a Qualcomm Composite Device. Since something's obviously still ticking, where did I go wrong?
Thanks
Click to expand...
Click to collapse
Put it on a charger for 5-6 hrs and see if that will help.I had this same problem but on a Moto G and charging it up helped.

liveroy said:
Put it on a charger for 5-6 hrs and see if that will help.I had this same problem but on a Moto G and charging it up helped.
Click to expand...
Click to collapse
Will do! I think I did try charging it awhile ago, but I'll give it another shot.

can my phone be unbricked?? here is the error log:
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has
een reset back to blank flash mode. Usually this is caused by power supply issu
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries

I am trying to install the drivers and it will show up as qhsusb_dload for about 5 seconds then reverts back to Relink HS USB QDloader 9008. Should i try the wire trick? It will say that the Qhsusb drivers are installed but always changes.

OnePlus 3T Factory Restore Utility

I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.

Split it up with WinRAR and then upload it to gdrive, Mega, mediafire... The server is up to you!

guisantes said:
I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.
Click to expand...
Click to collapse
Please try the attached torrent file.

guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
---------- Post added at 04:51 PM ---------- Previous post was at 04:09 PM ----------
hachamacha said:
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
Click to expand...
Click to collapse
I've got the file downloaded, unpacked, and am wondering if there's a README that came with it? I can see a lot of the usual ways to use the components via fastboot, etc, but thought this was meant to be a .. "utter disaster recovery tool" ;. Or am I missing something?

Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers - 64 bit windows driver is attached. I believe mine autoinstalled without needing the files
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.

guisantes said:
Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers. I believe these can be easily found but if not, then I can upload them as well.
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.
Click to expand...
Click to collapse
Thanks, that seems very useful. Thanks for making it available here.

hachamacha said:
Thanks, that seems very useful. Thanks for making it available here.
Click to expand...
Click to collapse
No problem.
I've used a very similar tool previously for my oneplus one which would not power up Hopefully I won't need it for my 3T !

Here are the missing Qualcomm 64 bit drivers.

Can we make this a sticky or mention in the OP the recovery procedure from post #5? I know this will become invaluable later on as the few devs that bought this phone start fully getting into test mode.

Delete fixed. Never mind.

You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it

if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!

mgbotoe said:
You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it
Click to expand...
Click to collapse
I agree: Over on OP and here, I find myself recommending this guide and software nearly each day to someone that just "bricked" their phone. It's really good. As was just said, sticky it in "Guides" area. Thanks.

guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
Do you have the password from the OnePlus support?

FYI.. OP3T finally has an official section on the OP downloads page
http://downloads.oneplus.net/

martinklaus said:
Do you have the password from the OnePlus support?
Click to expand...
Click to collapse
There is no password on this archive.

mahonlee said:
if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!
Click to expand...
Click to collapse
I used it without issue on my 3T. Are you still seeing the problem?

I uploaded it on megaNZ but I can't send links in here, so if you want it, send me a message. Btw: Thanks for the torrent, works perfectly!

guisantes said:
There is no password on this archive.
Click to expand...
Click to collapse
Yes, but on the original file from the support.

That's correct. I repackaged the files without a password after tech support extracted them via a remote session on my PC. Their archive password was very long with lots of non alpha-numeric characters.

Which Qualcomm interface driver for download mode?

Hi all!
I am trying to flash QFIL file to my Nokia 7 plus (TA-1046), but with no success because the Qualcomm driver is not installed automatically.
I have the 1.0 Qualcomm driver collection installed, but when I plugin my phone in download mode, I see it appear in device manager under "other devices" as "Android". I can update the driver to any other Qualcomm driver, but I don't know which one to choose. I tried the "QDLoader 9008" and it installs fine, but in QFIL.exe I can't flash my phone. I still get sahara errors.
What driver (type number) do I need to install to connect my phone's interface (download mode)?
EDIT:
Forgot to mention the obvious, it's Windows 7...

sbsoft said:
Hi all!
I am trying to flash QFIL file to my Nokia 7 plus (TA-1046), but with no success because the Qualcomm driver is not installed automatically.
I have the 1.0 Qualcomm driver collection installed, but when I plugin my phone in download mode, I see it appear in device manager under "other devices" as "Android". I can update the driver to any other Qualcomm driver, but I don't know which one to choose. I tried the "QDLoader 9008" and it installs fine, but in QFIL.exe I can't flash my phone. I still get sahara errors.
What driver (type number) do I need to install to connect my phone's interface (download mode)?
EDIT:
Forgot to mention the obvious, it's Windows 7...
Click to expand...
Click to collapse
When you install QPST Too,l all qualcomm drivers are installed to your pc. if your device is not detected by your pc try restarting your pc. if restart not working the. open device manager and search for unknown device then install driver manually.

sarath medithi said:
When you install QPST Too,l all qualcomm drivers are installed to your pc. if your device is not detected by your pc try restarting your pc. if restart not working the. open device manager and search for unknown device then install driver manually.
Click to expand...
Click to collapse
Thanks for your reply!
I did all you said (incl installing QPST tool), but still see "Android" under "Unknown devices". It is not recognized at all by Windows.
I want to install manually, but don't know which driver to choose from. I see a list of about 50 Qualcomm port drivers (MSM xxxx, QDLoader xxxx, Diagnostics xxxx), so which one is the correct one? What do you see under your "Ports (COM and LPT)" in device manager when you connect your phone in download mode?

QFIL Flashing Procedure
sbsoft said:
Thanks for your reply!
I did all you said (incl installing QPST tool), but still see "Android" under "Unknown devices". It is not recognized at all by Windows.
I want to install manually, but don't know which driver to choose from. I see a list of about 50 Qualcomm port drivers (MSM xxxx, QDLoader xxxx, Diagnostics xxxx), so which one is the correct one? What do you see under your "Ports (COM and LPT)" in device manager when you connect your phone in download mode?
Click to expand...
Click to collapse
Please confirm your qfil version.
Tool frome here:
https://aiomobilestuff.com/download-...st-flash-tool/
Drivers from here:
http://www.mediafire.com/file/j3g88d...r+V1.1.0.0.rar
Steps to flash the phone
Step1: To use QPST, some drivers need to be installed on your Computer.
Note: While installing driver avoid using cable for successful installation.
When Drivers installed, Attach Phone to PC via USB cable.
While connecting to PC, phone should be switched off and press volume up & down as boot key.
If it Create Qualcomm HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.
Step 2. Make sure your device is charged to at least 30%.
Step 3. Run QFIL tool.
Step 4. Now Browse under the Programmer path to Chose the B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf File.
Step 5. As soon as the elf file is selected, Select Build will automatically select the Update or Stock ROM.
Step 6. Next Go To Load XML, selectB2N-0-132E-rawprogram0.xml and Select B2N-0-132E-patch0.xml
Step 7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
Step 8. Click on Select Port and choose the port.
Step 9. Click on Download to start flashing.
Step 10. Disconnect device from USB cable once Finish Download appears.
That’s all!
Hit thanks button if you find this helpful
Happy flashing
Note: If you get the Sahara Errors Place Firmware folder in QFIL\Bin folder. Check whether programmer file is available in your firmware folder. It is an elf file (B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf). Use recent version of QPST. earler versions cant flash .elf programmers.

sarath medithi said:
Please confirm your qfil version.
Tool frome here:
https://aiomobilestuff.com/download-...st-flash-tool/
Drivers from here:
http://www.mediafire.com/file/j3g88d...r+V1.1.0.0.rar
Steps to flash the phone
Step1: To use QPST, some drivers need to be installed on your Computer.
Note: While installing driver avoid using cable for successful installation.
When Drivers installed, Attach Phone to PC via USB cable.
While connecting to PC, phone should be switched off and press volume up & down as boot key.
If it Create Qualcomm HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.
Step 2. Make sure your device is charged to at least 30%.
Step 3. Run QFIL tool.
Step 4. Now Browse under the Programmer path to Chose the B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf File.
Step 5. As soon as the elf file is selected, Select Build will automatically select the Update or Stock ROM.
Step 6. Next Go To Load XML, selectB2N-0-132E-rawprogram0.xml and Select B2N-0-132E-patch0.xml
Step 7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
Step 8. Click on Select Port and choose the port.
Step 9. Click on Download to start flashing.
Step 10. Disconnect device from USB cable once Finish Download appears.
That’s all!
Hit thanks button if you find this helpful
Happy flashing
Note: If you get the Sahara Errors Place Firmware folder in QFIL\Bin folder. Check whether programmer file is available in your firmware folder. It is an elf file (B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf). Use recent version of QPST. earler versions cant flash .elf programmers.
Click to expand...
Click to collapse
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???

sbsoft said:
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???
Click to expand...
Click to collapse
QFIL don't need unlocked bootloader as it uses EDL Mode for flashing. I suggest you to change the usb port and try with another data cable.
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
sbsoft said:
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???
Click to expand...
Click to collapse
can you share the qfil log or screenshot

sarath medithi said:
QFIL don't need unlocked bootloader as it uses EDL Mode for flashing. I suggest you to change the usb port and try with another data cable.
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
can you share the qfil log or screenshot
Click to expand...
Click to collapse
Here we go:
(I have Dutch language version of Windows 7, so no English in some pictures)
1. The driver is installed correctly and working fine. (I need to boot Windows in testsigning mode with no driver signature checking, because the driver is not signed correctly?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is in Download mode.
When I click Download in QFIL, this is the output and nothing happens.
The configuration of QFIL looks like this:
Is this enough for you? If not, please let me know. I am starting to get headaches of this problem...
Thanks!

sbsoft said:
Here we go:
(I have Dutch language version of Windows 7, so no English in some pictures)
1. The driver is installed correctly and working fine. (I need to boot Windows in testsigning mode with no driver signature checking, because the driver is not signed correctly?)
Phone is in Download mode.
When I click Download in QFIL, this is the output and nothing happens.
The configuration of QFIL looks like this:
Is this enough for you? If not, please let me know. I am starting to get headaches of this problem...
Thanks!
Click to expand...
Click to collapse
Try to update your QFIL.i think there is a new version available. update it and try again. may be it is giving an error due to the programmer file which is an elf file. earlier it is .mbn or .bin file. hope you understand.

Did you succede in using QFIL ? @sbsoft

QPST with QFIL Flashing Sahara Error Solution

the solution of this error is simple.
just install proper qualcomm drivers from latest qpst setup . cause it includes the drivers too.
now just short the name of firmware folder to short form.
now open qpst or qfil, select firmware folder and select
rawprog_emmc_ufs_firehose_Sdm660_ddr.elf
then rawprogram unspare no nfc no fsg.xml '
then patch0. xml file
after that this is the main thing.
press vol + and vol- buttons together and put it into edl mode
and now connect it to the pc with cable . don't do anything till qpst or qfil not recognize it byself.
it took 30 sec to recogniz for my time.
it will take more for you may be. now download button will become available .
just click on it and now flashing will start without any error .
i was getting this error cause i was putting the device edl mode and connecting it to pc before opening of qfil or qpst.
you had to connect it after opening the qfil or qpst then you will not get any shara errror.
and have to wait at least 30 sec don't do anything till then . and after that windows will sound of connecting and that's it.
start flashing without shara error.
another solution:-
Copy firmware folder (imges) into
cdrive/programmer files/qualcomm/QPST/bin
2- Than open QFIl Select Programme Files .mbn
then both .xml Files From Cdrive where U copy
3- Now Close QFIL
4- Now Connect Handset Into Quacomm Mode (hs-usb , edl , download etc )
5- Open QFIL Again
Already Post Selected
6- Now Press Download
SUCCESS
latest qpst download from this site:-https://androidmtk.com/download-qpst-flash-tool
also try this in offline mode like remove all internet connection or wifi disable or enable airplane mode on your pc or lapto

Can post a link of QPST that you used

DJ AJB said:
Can post a link of QPST that you used
Click to expand...
Click to collapse
still getting shara error which version of winodws you using
if using windows 10 disable driver signature enforcement first then install qualcomm drivers perfectly included in qpst
after that open qfil or qpst now select all files and after that boot device in edl mode and connect it now to the pc rember dont connect with pc before qfill or qpst open now with usb cable wait for atleast 40 sec if it get recognize . download button will become available ,just click on it and start flashing

Thanks a lot it has successfully finished

When I do this I always receive:
2021-07-13 14:27:51.932 Download Fail:FireHose Fail:FHLoader Fail: process fail
Can someone give me any advice?
I also included my log.file

I waited for long, i had to selec the port as it says
im lost