I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.
Split it up with WinRAR and then upload it to gdrive, Mega, mediafire... The server is up to you!
guisantes said:
I have the factory restore utility available for the 3T but not sure how to upload it or link to it since it exceeds the allowable upload size limit. It's a 1.2GB 7z file.
Click to expand...
Click to collapse
Please try the attached torrent file.
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
---------- Post added at 04:51 PM ---------- Previous post was at 04:09 PM ----------
hachamacha said:
I'm trying it. It's just a matter of time before I need something like this ;
I'm ~30% done so should be downloaded for me in ~60-80 minutes+.
Thanks.
Click to expand...
Click to collapse
I've got the file downloaded, unpacked, and am wondering if there's a README that came with it? I can see a lot of the usual ways to use the components via fastboot, etc, but thought this was meant to be a .. "utter disaster recovery tool" ;. Or am I missing something?
Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers - 64 bit windows driver is attached. I believe mine autoinstalled without needing the files
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.
guisantes said:
Yes, it is and utter disaster recovery tool.
You may need the qualcomm drivers. I believe these can be easily found but if not, then I can upload them as well.
**** NOTE: This procedure will completely wipe your entire device ****
To use the recovery tool.
1. With the phone turned off, press and hold the volume up button while inserting the USB cable attached to your PC.
2. Windows will recognize the Qualcomm driver and if you're lucky will auto install the driver.
3. Run the MsmDownloadTool V3.0.exe file with administrator privileges (right click and run as administrator)
4. One of the lines in the window should show COMM or something that is not "No Device" when your phone is attached and recognized as the Qualcomm loader
5. Click on that line item, then select Start
6. The whole procedure should take about 5 minutes and the line item will turn green when completed.
Click to expand...
Click to collapse
Thanks, that seems very useful. Thanks for making it available here.
hachamacha said:
Thanks, that seems very useful. Thanks for making it available here.
Click to expand...
Click to collapse
No problem.
I've used a very similar tool previously for my oneplus one which would not power up Hopefully I won't need it for my 3T !
Here are the missing Qualcomm 64 bit drivers.
Can we make this a sticky or mention in the OP the recovery procedure from post #5? I know this will become invaluable later on as the few devs that bought this phone start fully getting into test mode.
Delete fixed. Never mind.
You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it
if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!
mgbotoe said:
You should place this in general with the guides in the op with some pictures , I think many will benefit rather than diving through the QnA section for it
Click to expand...
Click to collapse
I agree: Over on OP and here, I find myself recommending this guide and software nearly each day to someone that just "bricked" their phone. It's really good. As was just said, sticky it in "Guides" area. Thanks.
guisantes said:
Please try the attached torrent file.
Click to expand...
Click to collapse
Do you have the password from the OnePlus support?
FYI.. OP3T finally has an official section on the OP downloads page
http://downloads.oneplus.net/
martinklaus said:
Do you have the password from the OnePlus support?
Click to expand...
Click to collapse
There is no password on this archive.
mahonlee said:
if i restore factory mode.what's the next?
---------- Post added at 07:35 PM ---------- Previous post was at 07:29 PM ----------
when i restore, after reboot, have some error, it says: md5 checksum failed!
help me!
Click to expand...
Click to collapse
I used it without issue on my 3T. Are you still seeing the problem?
I uploaded it on megaNZ but I can't send links in here, so if you want it, send me a message. Btw: Thanks for the torrent, works perfectly!
guisantes said:
There is no password on this archive.
Click to expand...
Click to collapse
Yes, but on the original file from the support.
That's correct. I repackaged the files without a password after tech support extracted them via a remote session on my PC. Their archive password was very long with lots of non alpha-numeric characters.
Related
NOTE : These Firmwares developed by Lenovo, not me.
I am just helping people to take advantage from their Lenovo A3000-H by Giving small guides and resources.
Click to expand...
Click to collapse
Here is the Lenovo A3000-H Android 4.2.2 Firmware With the Calling Option..
Flash Tool Inside the RAR Archive (If not found inside rar Archive, Just download it separately from Download Section)
Click to expand...
Click to collapse
Here is a Small Guide How To Install the Firmware (I assume you already Installed the Lenovo Drivers
- See Download Section For Drivers)
Click to expand...
Click to collapse
** Short note to Install Drivers Quickly, Download the drivers package and extract it into a new folder in your desktop, open device manager and wait..
- then switch off the tab, connect the cable to your computer and tab, device manager will show a new device something like MT65xx,
- right click it and click " Update Driver Software, then select " Browse from My Computer " and Select the extracted Driver folder from your desktop, Click Next..
- It will Install Drivers, If any confirmations asking " Do You Want to Continue " or " Do You Want to Install " Just click " YES "
- For Windows 8 and 8.1, You must restart your PC in Driver Signature Enforcement Mode (Search on Internet how to Disable Driver Signature Enforcement in Windows 8). After Booting into that Mode, Follow above Instructions.
WARNING : DO NOT TOUCH THE OPTION " FORMAT " IN THE FLASH TOOL.
IF YOU FORMAT YOU WILL LOSE YOUR TAB's IMEI NUMBER & WIFI MAC ADDRESS.
Click to expand...
Click to collapse
IMPORTANT : BEFORE YOU PLAY AROUND, IT IS BETTER YOU TAKE A BACKUP OF YOUR " NVRAM " FOLDER FROM ROOT ==>> data ==>> nvram
COPY THE COMPLETE " nvram " FOLDER TO YOUR SD CARD AND KEEP A COPY IN YOUR PC.
THIS nvram FOLDER CONTAINS YOUR IMEI, WIFI MAC, SERIAL NUMBER AND OTHER IMPORTANT DATA.
Click to expand...
Click to collapse
1. Unpack the RAR archive to Somewhere in Your Computer (Me Extracted to a Folder in Desktop)
(You will find 4 Folders Inside the rar Named : modemdb, SP_Flash_Tool_NEW, SP_Flash_Tool_OLD, target_bin)
- Some Firmwares does not contain all the folders. So don't worry about that, Just the Important folder is target_bin.
2. Open " SP_Flash_Tool_OLD " Folder, There You Will Find a Blue Icon, Flash_tool.exe file
3. Double Click Flash_tool.exe (If you are using windows Vista/ 7/ 8/ 8.1 Right Click the Flash_tool.exe and Run As Administrator.
4. Then the Flashtool will Open up.. There you can Find Lots of Options.. Be careful, Do not Click any other Options until u get a knowledge about that, otherwise your Device will be Ruined..
5. Now Click the " Scatter-loading " In the Top Right Corner of the Tool, then Navigate to the Extracted Firmware Folder, and goto the target_bin, there you will find a file named " MT6589_Android_scatter_emmc.txt " Select that file and Click " Open "
6. Make Sure " DA DL All with check sum " option is Ticked
** NOTE : If " FAC " is not selected, please tick the FAC option and click on the name " FAC " it will give you file explorer to select the FAC file
then select " FAC.img " file from the firmware folder. (This only applicable for A3000_A422_* and later firmwares)
7. Now Switch off the tablet, wait for 15 seconds And Prepare the USB cable, And Click " DOWNLOAD " (in case if you get any error messages when you click DOWNLOAD, then Please Click " FIRMWARE->UPGRADE " option) then wait 5 Seconds and Connect the USB cable to the Tablet. It will Start Flashing. A yellow Bar will appear, It will take 3 to 5 Minutes to Finish the flash Operation. Do not Disconnect until that. Finally A small Green Round Box Appear, That means Everything Success.. Now Disconnect the Cable and Start the Tablet
It will take Few Minutes to start the Tablet First time, So wait Patiently. After Start It will ask you to select the language, Select English or any language you want.. and Configre time and Everything.. Thats all.
Click to expand...
Click to collapse
VIDEO TUTORIAL :
Click to expand...
Click to collapse
DOWNLOADS
Click to expand...
Click to collapse
Android 4.2.2 Latest Firmware With All Languages & FUSE Partition
A3000_A422_011_022_140127_WW_CALL_FUSE
Firmware Released on 27th January 2014..
CLICK HERE TO DOWNLOAD A3000_A422_011_022_140127_WW_CALL_FUSE FIRMWARE
انقر هنا لتحميل أحدث البرامج الثابتة حزمة.
Click to expand...
Click to collapse
OTHER (OLD) DOWNLOADS - IN THE FOLDER (FOR ADVANCED USERS ONLY )
CLICK HERE TO OPEN THE DOWNLOADS FOLDER!
Click to expand...
Click to collapse
UPDATED Drivers (23rd February 2014) (Flash and ADB) : http://www.mediafire.com/download/juzwauwy9rx9yw6/Drivers_v1.2.zip
Click to expand...
Click to collapse
Latest Flash Tool : http://www.mediafire.com/download/k0lpbxp5fmuvpzu/SP_Flash_Tool_exe_v3.1328.0.183.zip
.
Recovery and Gapps
TWRP Recovery and Gapps (OPTIONAL - ONLY FOR ADVANCED USERS )
Click to expand...
Click to collapse
** RECOVERY INSTALLATION ALSO SAME LIKE INSTALLING FIRMWARE. JUST LOAD THE SCATTER FILE FROM THE RECOVERY PACKAGE AND HIT DOWNLOAD! IF ANY WARNINGS APPEARS, JUST IGNORE THEM!
Install this TWRP RECOVERY ONLY If You are Running " A3000_A422_000_006_130517_WW_CALL " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A422_000_006_130517_WW_CALL " FIRMWARE
Click to expand...
Click to collapse
Install this TWRP RECOVERY ONLY If You are Running " A3000_A421_000_029_130327_CN_3G " Firmware!
CLICK HERE TO DOWNLOAD TWRP RECOVERY FOR " A3000_A421_000_029_130327_CN_3G " FIRMWARE
Click to expand...
Click to collapse
Install This GAPPS after Installing " A3000_A421_000_029_130327_CN_3G " Firmware and Recovery..
** Put the GAPPS Package on a Memory card and Install through TWRP Recovery
CLICK HERE TO DOWNLOAD GAPPS FOR A421
Click to expand...
Click to collapse
Use framroot to root your tab.
Download : CLICK HERE TO DOWNLOAD FRAMROOT 1.6.0 APK
Click to expand...
Click to collapse
Check here How to Install GAPPS manually using Root Explorer..
Note : Your Tab must be rooted before Install the Gapps manually..
Extract the gapps zip package somewhere in your memory card using computer before copy.
Click to expand...
Click to collapse
Some Screenshots!
Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?
MrBeck said:
Does this firmware include the "fused" internal storage partitions, a single 13GB partition instead of one 1GB for apps and one 12GB for other?
Click to expand...
Click to collapse
It Includes 1GB for Apps and 12GB For Files
Lenovo drivers
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?
bedrock0220 said:
how can i install the lenovo a3000 drivers? via PC or on the tablet itself?
Click to expand...
Click to collapse
Download the drivers package, extract it to the desktop. Then Open flash tool and Initialize the flashing procedure, then hit download and connect the tablet to the pc, it will ask to install drivers, if not then goto device manager, u can see there your device right click it and click update drivers, then give the extracted location of the drivers. it will install.
Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?
lenovo a3000
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.
jazmy said:
Point 7 is not clear ! why wait seconds ?!
* What means prepare usb cable to plug it or to prepare it ?!
* All previous points should be done while USB connected to pc ?
Click to expand...
Click to collapse
After Turning off the tablet, it is better you wait few seconds before connecting to pc for flashing.
You Should not Connect the Cable to the tablet Before 7th Stage, All previous points should be done WITHOUT CONNECTING USB to PC.
You Should connect the Cable after You Click the Button " DOWNLOAD "
bedrock0220 said:
Sir,
I followed your instruction on installing driver via device mgr and the result is driver is updated.I followed your instruction on flashing and when off my tab and push the download button and wait 5 secs after that to connect the USB to pc. But when I push the download the flasher started reading and the bar is in pink color, when I put my USB after 5 secs there is no reaction on the flasher, only on my tab has an icon of battery and under charging.PLEASE HELP.
note: my tab FW already jb 4.2.2 without call function.
Click to expand...
Click to collapse
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?
bedrock0220 said:
i followed your instruction sir to reset it while connected to PC but still no response on the flasher, no yellow bar status either.any other suggestion for such result?
Click to expand...
Click to collapse
Can you check the device manager after connecting the tab to pc??? see is there any un installed drivers left there or not..
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?
azam426 said:
After you hit the DOWNLOAD button connect the Cable to the tablet. If its started in charging Mode(tab has an icon of battery and under charging) Just reset the tablet while its connected to the pc. Reset button is near the 2nd SIM Slot.
Click to expand...
Click to collapse
I didn't try it yet but maybe bedrock0220 has different Jellybean version !!
check the screenshot of my tab maybe it will help...TY
bedrock0220 said:
check the screenshot of my tab maybe it will help...TY
Click to expand...
Click to collapse
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?
bedrock0220 said:
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:17 PM ---------- Previous post was at 02:12 PM ----------
[/COLOR]
Sir, i just followed your instruction to rest the tab while it is connected to the PC but still no response from the flasher, even yellow bar status is not present. i transfer the device to other usb ports but after i push the DOWNLOAD button but the PC is looking for MTK65xx driver? so the flashing did not push thru. where can i get this driver?
i 2x check the device manager for my tab that is connected to PC, i only found out portable device with 2 drives (D,E) and some usb ports. i update the drivers of both using the file locations but it is up to date.
please help...
---------- Post added at 02:27 PM ---------- Previous post was at 02:17 PM ----------
i check the device manager and i think all drivers are already installed. any other solution for me to try?
Click to expand...
Click to collapse
Try the Drivers From Next Post, Download it, Extract it then double click install.bat it will install Drivers. Then try to flash.
Your tab should be always off when you do flash operations (Install flash drivers, flash new firmware etc) by connecting the USB cable
New usb flash driver!
NEW USB FLASH DRIVER!
Try to Install this Driver and Flash... :good:
bedrock0220 said:
do i need to off my tab before i go to device manager?
is there a USB debugging or developer option on the tab that i will open?
Click to expand...
Click to collapse
I am Busy today, Inshaallah tomorrow i will try to Make a Video Tutorial for Install Drivers, firmware etc..
Firmware upgrade
Hi.....We need to press "Download" or "Firmware-Upgrade". If I press "Download", I am getting message to press "Firmware-Upgrade".
Thanks,
Moving this to it's own thread so it's easier to follow the discussion.
Special thanks to s629c for finding the dialer code that led to the download link and Dante087 for finding the download link.
Generic instructions for sideloading OTA package:
Flashing via this method WILL WIPE EVERYTHING SO BACKUP FIRST. Short tutorial (I'm not responsible for anything that goes wrong, but this worked for me):
1) BACKUP
2) Download package (see links farther down in post)
4) Reboot into recovery. Turn off phone and wait a minute for it to completely turn off. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
5) Select Apply Update from ADB
6) Make sure you have Android Platform Tools on your computer (there's other guides for this)
7) command 'adb sideload <path to downloaded file here>'
8) Wait patiently
9) Phone reboots and will hang at AT&T logo for 5+ minutes. Just wait this out
Links
Starting at OJ9
To PC2: https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3BOJ9-to-U3CPC2-UP
To PD6: https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3BOJ9-to-U3CPD6-UP
Starting at PC2
To PD6:
First, go to PD4: https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3CPC2-to-U3CPD4
Then, go to PD5: https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3CPD4-to-U3CPD5-UP
Finally, go to PD6: https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3CPD5-to-U3CPD6-UP
Could someone please help?? I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot>adb sideload ota.zip
error: protocol fault (no status)
skullymullins said:
Could someone please help?? I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot>adb sideload ota.zip
error: protocol fault (no status)
Click to expand...
Click to collapse
It probably means either the phone isn't connected or isn't accepting sideload.
Try the command 'adb devices' and post your output from that command.
How to install ADB-
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Sideloading-
When sideloading in adb, type in "adb sideload [path to ota.zip]" (without quotes, example of filepath on windows c:\users\account\desktop\ota.zip)
Possible Errors when attempting-
Didnt type filepath and just put ota.zip
encrypted: decrypt before updating
~I will update as needed
---------- Post added at 08:02 PM ---------- Previous post was at 08:01 PM ----------
skullymullins said:
Could someone please help?? I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot>adb sideload ota.zip
error: protocol fault (no status)
Click to expand...
Click to collapse
did you forget to type in the file path of the file?
Link in step 2 requiring login name and password. Did they lock it up? If so, can someone host it?
Sent from my SAMSUNG-SM-G920A using XDA-Developers mobile app
netter123 said:
Link in step 2 requiring login name and password. Did they lock it up? If so, can someone host it?
Sent from my SAMSUNG-SM-G920A using XDA-Developers mobile app
Click to expand...
Click to collapse
Yep, looks like they locked it down
Is someone able to upload to Mega or another service? I won't be able to for a couple hours.
It really is amazing though how quickly AT&T was able to "test" locking down that website though
Doing so now
The link in the OP is incorrect, it has the ellipses (...) indicating it must have been copy/pasted from the original post rather than copy/pasted from the link itself. Correct link should be in the original post in the other thread.
jlongrc said:
The link in the OP is incorrect, it has the ellipses (...) indicating it must have been copy/pasted from the original post rather than copy/pasted from the link itself. Correct link should be in the original post in the other thread.
Click to expand...
Click to collapse
Ah good catch. Fail on my part. I updated the OP. Guess AT&T hasn't locked it down yet.
https://xdmd.sl.attcompute.com/agents/48653/1488/SS-G920AUCU3BOJ9-to-U3CPC2-UP link still works
I'm getting a * cannot read update.zip * error. Whats the solution to this? I am using the correct path and have downloaded the update twice now.
NotNathan said:
I'm getting a * cannot read update.zip * error. Whats the solution to this? I am using the correct path and have downloaded the update twice now.
Click to expand...
Click to collapse
I have the same problem When I was trying to solve this porblem, my phone was in update mode, it factory reset itself! So I need to find a way to fix this problem to get the MM at least
Uploaded the file in case AT&T blocks it - http://www.filedropper.com/ota
NotNathan said:
I'm getting a * cannot read update.zip * error. Whats the solution to this? I am using the correct path and have downloaded the update twice now.
Click to expand...
Click to collapse
Some people were reporting that in the other thread. I think the solution was different path (put it directly in C:/), different cable, different USB port, or different computer.
Dante087 said:
Uploaded the file in case AT&T blocks it - http://www.filedropper.com/ota
Click to expand...
Click to collapse
Thanks! Updated OP with your mirror
schhy said:
How to install ADB-
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Sideloading-
When sideloading in adb, type in "adb sideload [path to ota.zip]" (without quotes, example of filepath on windows c:\users\account\desktop\ota.zip)
Possible Errors when attempting-
Didnt type filepath and just put ota.zip
encrypted: decrypt before updating
~I will update as needed
---------- Post added at 08:02 PM ---------- Previous post was at 08:01 PM ----------
did you forget to type in the file path of the file?
Click to expand...
Click to collapse
If I remember correctly, another common error also is spaces in the path to the filename.
I think then you have to put the path and file in quotes like "C:\path with spaces\update.zip"
doubled up
I am having a problem where it says adb installs are disabled on my phone in recovery mode... Anyone know whats going on? USB debugging is enabled.
mrblatz said:
I am having a problem where it says adb installs are disabled on my phone in recovery mode... Anyone know whats going on? USB debugging is enabled.
Click to expand...
Click to collapse
Are you encrypted?
Sent from my SAMSUNG-SM-G920A using XDA-Developers mobile app
schhy said:
Are you encrypted?
Sent from my SAMSUNG-SM-G920A using XDA-Developers mobile app
Click to expand...
Click to collapse
I was, but I did a full factory reset and I am no longer encrypted.
Thanks for helping me btw.
when trying to reflash to stock i keep getting this error below, when trying to side-load the update.
Thanks for the help.
C:\Users\Matt\Desktop\fastboot>adb devices
List of devices attached
4afb3763 sideload
C:\Users\Matt\Desktop\fastboot>adb sideload OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161d 2b234949.zip
loading: 'OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161 d2b234949.zip'
* cannot read 'OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161 d2b234949.zip' *
bumb
Flash with recovery, but also make sure ur bootloader is unlocked.
May be the file is corrupted . just check md5 to be sure.
I'm having the same problem. I can't boot into OS to turn on debugging or anything and the phone only loads to the oneplus loading screen.
If you are getting the "cannot read" error when sideloading in adb, you can try this handy tool call Large Address Aware (LAA). I was having the same problem on my Win10 Home 64bit system and managed to solve it using LAA.
Just download and unzip LAA to any folder. Run it and modify the adb.exe file. Now try sideloading and the "cannot read" error will be gone. Good luck.
For more details, follow the link
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Download LAA (attached)
I will try next time, I had to do the un brick way. Thanks
networx2002 said:
I will try next time, I had to do the in brick way. Thanks
Click to expand...
Click to collapse
Can I ask what OS you are using? I'm having a mare with windows 10 64bit and the drivers.
---------- Post added at 05:08 PM ---------- Previous post was at 04:55 PM ----------
fluster84 said:
If you are getting the "cannot read" error when sideloading in adb, you can try this handy tool call Large Address Aware (LAA). I was having the same problem on my Win10 Home 64bit system and managed to solve it using LAA.
Just download and unzip LAA to any folder. Run it and modify the adb.exe file. Now try sideloading and the "cannot read" error will be gone. Good luck.
For more details, follow the link
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Download LAA (attached)
Click to expand...
Click to collapse
After 3 days of messing around I've managed to push the update to the phone!
Thanks so much for your help mate :good: !
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
where is prog file bro ???
Is that method bring back to DELETED EFS partition (IMEI, MEID, etc.) ?
Kaikhung said:
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
Click to expand...
Click to collapse
Hi,
My phone is hard brick too. I have some questiong about you solution:
1) which version of miFlash that you are using?
2) Do you remove the "mi" folder in your miFlash folder?
3) which "prog_emmc_firehose_Sdm660_ddr.elf" that you are using (there are many file on google)?
4) while you unplug the battery connector, is EDL mode still connected?
5) while you plug back the batterry connector, is EDL mode still connected?
Sorry for asking these questions, but I tried so many guide like this. And my phone still hard bricked
hardbrick solution
angelline2005 said:
Hi,
My phone is hard brick too. I have some questiong about you solution:
1) which version of miFlash that you are using?
2) Do you remove the "mi" folder in your miFlash folder?
3) which "prog_emmc_firehose_Sdm660_ddr.elf" that you are using (there are many file on google)?
4) while you unplug the battery connector, is EDL mode still connected?
5) while you plug back the batterry connector, is EDL mode still connected?
Sorry for asking these questions, but I tried so many guide like this. And my phone still hard bricked
Click to expand...
Click to collapse
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
hi efazul,
where did you get this tool? is it really safe?
I have been downloaded these files and extract it, and immediately there are 2 files got deleted due to a virus by my eset smart security.
and here are the reports:
https://www.hybrid-analysis.com/sam...7ec8ca5e3c5a10a2d6da0c56bc907e5e02c1b010f1550
https://www.hybrid-analysis.com/sam...06fbbc029699060d4213800e7c34c73fd867822e67121
hardbrick solution
karkand said:
hi efazul,
where did you get this tool? is it really safe?
I have been downloaded these files and extract it, and immediately there are 2 files got deleted due to a virus by my eset smart security.
and here are the reports:
i found some viruses too but i allowed them and unbrick tool worked
i found this tool in a youtube video description as i dont have a authorized mi id it really helped me thats why i posted it here sorry for hastle
Click to expand...
Click to collapse
For anyone that is still looking for a solution to their bricked Note 7, the tool efazul_fayad linked works like a charm! You do have to disable your AV, I used Malwarebytes and turned off all protections except web and ransomware and it did the job!
2111002640 said:
where is prog file bro ???
Click to expand...
Click to collapse
i cant find it too
Good job man! And very good information! Thx.
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
Kaikhung said:
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
Click to expand...
Click to collapse
I did but still Getting cannot receive hello packet
Any help ???
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
I can't extract the file, it says file corrupted
arafman said:
I did but still Getting cannot receive hello packet
Any help ???
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
I can't extract the file, it says file corrupted
Click to expand...
Click to collapse
use 7zip
Error
Please check the attachment image. I'm getting this error.
brick
hello guys it took me a long time to find this totirial with all the files ready to revert the damaged phone i installed all the applications that are in the video description and it works 100% the phone came with the global rom but the original phone is chinese so i had to install the rom of Chinese origin. I put the folders on drive C of the pc. I hope that you will be able to reverse the situation in this way.https://youtu.be/scP-PF5NLl0
Hi there,
I just save my cactus from a “Vibrate massager”.
If you got the same problem,this maybe help you.
First,download three tools;
1.MTK-Bypass
2.SP-Flash-Tool
3.MiFlash Professional Edition(Black logo,need install)(If you got a yellow logo edition and not need install,don't use it. It's public edition.)
My internet environment doesn't allow me to access a lot of websites(.etc Google,Youtube,Facebook,Twitter...),so try to google/bing it and download it.
If you got all needed tools,charge your “Vibrate massager”,and...
Here we go!
1.plug your cactus to pc.
2.open Miflash Professional.
3.select SP flash.
4.click "Options".
5.Go to "general".
6.Make sure all three options is "false" now.
7.select appropriate files for DA and scatter BUT WITHOUT "AUTH".
8.hold Volume+ and power,until your computer make response for it.
9.<--DO THIS IN 5 SECONDS-->
(1)Open MTK-bypass IMMEDITELY.
(2)Select MT6765(even cactus is 6762,but select 6765 anyway) IMMEDITELY.
(3)Click Bypass IMMEDITELY.
<--YOU CAN TAKE A BREATH NOW.-->
10.When bypass is complete,back to SP-Flash, and then click flash.
11.Wait patiently.
12.It should boot up now.
P.S. Your bookloader is back to lock. You need to unlock it again.
318cyz said:
Hi there,
I just save my cactus from a “Vibrate massager”.
If you got the same problem,this maybe help you.
First,download three tools;
1.MTK-Bypass
2.SP-Flash-Tool
3.MiFlash Professional Edition(Black logo,need install)(If you got a yellow logo edition and not need install,don't use it. It's public edition.)
My internet environment doesn't allow me to access a lot of websites(.etc Google,Youtube,Facebook,Twitter...),so try to google/bing it and download it.
If you got all needed tools,charge your “Vibrate massager”,and...
Here we go!
1.plug your cactus to pc.
2.open Miflash Professional.
3.select SP flash.
4.click "Options".
5.Go to "general".
6.Make sure all three options is "false" now.
7.select appropriate files for DA and scatter BUT WITHOUT "AUTH".
8.hold Volume+ and power,until your computer make response for it.
9.<--DO THIS IN 5 SECONDS-->
(1)Open MTK-bypass IMMEDITELY.
(2)Select MT6765(even cactus is 6762,but select 6765 anyway) IMMEDITELY.
(3)Click Bypass IMMEDITELY.
<--YOU CAN TAKE A BREATH NOW.-->
10.When bypass is complete,back to SP-Flash, and then click flash.
11.Wait patiently.
12.It should boot up now.
P.S. Your bookloader is back to lock. You need to unlock it again.
Click to expand...
Click to collapse
is it working? Please reply
its possible to do that in 5 seconds if your laptop is not sluggish. im crying got my single core laptop.
ligodligerem said:
is it working? Please reply
Click to expand...
Click to collapse
Yes it's work.
I tried this for three times and all of them are success.
318cyz said:
Yes it's work.
I tried this for three times and all of them are success.
Click to expand...
Click to collapse
Yes 100% , if the issues are the same as posted above.
ligodligerem said:
its possible to do that in 5 seconds if your laptop is not sluggish. im crying got my single core laptop.
Click to expand...
Click to collapse
By the way, you can open MTK-Bypass and press bypass button earlier and it will wait for COM usb port.
When you entered the usb port mode it will pypass it immeditely and you can flash it.
I forgot to write it when I post this thread
Possible reasons to cause this problem:
1. Flashed wrong recovery.
2. Flashed wrong boot/kernel.
3. Wipe logo partition.