Database Develop

About flash CMW V20A

Hello,
I had posted this in Frequently Asked Questions about the LG Optimus 4x HD but got no help so I post here for a last try.
Just followed all dexter's steps in this thread to flash CMW
http://forum.xda-developers.com/showthread.php?t=2180138
but I got stuck here. Tried to read 34 pages of the thread but still couldnt solve my problem
My LG was rooted and unlocked.
Any help? thanks
Ekio

The error message says it all: no such file or directory. Change /mnt/sdcard/ to /storage/external_SD/

AlderCass said:
The error message says it all: no such file or directory. Change /mnt/sdcard/ to /storage/external_SD/
Click to expand...
Click to collapse
Tried and still not such files and directory thx anyway

ekiong said:
Tried and still not such files and directory thx anyway
Click to expand...
Click to collapse
Are u sure, u have copied the neede files to the root of ur SD-Card? Seems not... U have to unpack the zip-files for CWM and copy both files to the root of ur SD-Card... After that the commands should work...

Bogeyof said:
Are u sure, u have copied the neede files to the root of ur SD-Card? Seems not... U have to unpack the zip-files for CWM and copy both files to the root of ur SD-Card... After that the commands should work...
Click to expand...
Click to collapse
Omg I already did
Look pics

ekiong said:
Omg I already did
Look pics
Click to expand...
Click to collapse
I needed to allow SuperSU access before I be able to do it...
Pay attention to your phone, when you give the command "adb shell", if Superuser/SuperSU don't ask permition.
Its just a idea...

RuedasLocas said:
I needed to allow SuperSU access before I be able to do it...
Pay attention to your phone, when you give the command "adb shell", if Superuser/SuperSU don't ask permition.
Its just a idea...
Click to expand...
Click to collapse
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"

ekiong said:
Omg I already did
Look pics
Click to expand...
Click to collapse
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/ , ie:
Code:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
Code:
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
*edit*
ooops didn't look at all the screenshots. The last one shows your SD card path actually is indeed the same as mine. I'm all out of ideas then.
---------- Post added at 06:48 PM ---------- Previous post was at 06:40 PM ----------
ekiong said:
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"
Click to expand...
Click to collapse
Did you do it in recovery mode from the start? When I did it it was when the phone was just switched on normally into the main OS.

ekiong said:
I did it in recovery mode and tried it in terminal app aswell, but nothing happened with "cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1"
Click to expand...
Click to collapse
AlderCass said:
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/ , ie:
Code:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
Code:
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
*edit*
ooops didn't look at all the screenshots. The last one shows your SD card path actually is indeed the same as mine. I'm all out of ideas then.
Click to expand...
Click to collapse
Where the hell did you found that path /mnt/sdcard/....... ???

Tutorial CWM
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
1. Unlock Bootloader and get SU Permissions
2. Go to PlayStore download SuperSU and than start give permisions to it to update Binary , than go to Setting in SuperSU and install in System
3. Reboot Phone
4. Copy the 2 IMG data to root from SD and rename recovery-6028.img > recovery.img & unsecure-boot-mmcblk0p2.img > boot.img
this to IMG data must be unpacked from RAR(Zip) from Dexter.
5. make sure you have Unknow Sources and USB Debug Active , and also make sure that Superuser is replaced by SuperSU after reboot
6. Go to PlayStore and Download Android Terminal Emulator
and give in Terminal
Type "su" without quotes and than accept the permissions from SuperSU after that give in
----------------------------------------------------------------------------------------------------------------------------------
cat /mnt/sdcard/recovery.img >/dev/block/mmcblk0p1
sync
IF YOU USE UNSECURE BOOT tha use this
su
cat /mnt/sdcard/boot.img >/dev/block/mmcblk0p2
sync
Hope it helps and youv got it run :laugh:

RuedasLocas said:
Where the hell did you found that path /mnt/sdcard/....... ???
Click to expand...
Click to collapse
It's in the system root for me, it's a symlink. Though it didn't work for me in the cat command, which is why I suggested using /storage/external_SD/ instead which did work for me. It looks like the OP has the files in the right places, and the hash in the command line screenshot implies that SU is working correctly, so I'm all out of ideas now.
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
x0BlackTeresis0x said:
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
Click to expand...
Click to collapse
Little bit arrogant, we're all trying to help here, so I hope for your sake your way works for the OP

AlderCass said:
Looks like the path to your SD card is different to mine. Try replacing /mnt/sdcard/ in the original command with /sdcard/
Also no need to get aggravated, none of us are being rewarded for helping you here but we're trying to help anyway...
Click to expand...
Click to collapse
Sorry man, just had a bad feeling .
--------------------------------------------------------------------------
x0BlackTeresis0x said:
Dude forget what they say everyone tells different way, read here what i writeto you and make the steps like me.
1. Unlock Bootloader and get SU Permissions
2. Go to PlayStore download SuperSU and than start give permisions to it to update Binary , than go to Setting in SuperSU and install in System
3. Reboot Phone
4. Copy the 2 IMG data to root from SD and rename recovery-6028.img > recovery.img & unsecure-boot-mmcblk0p2.img > boot.img
this to IMG data must be unpacked from RAR(Zip) from Dexter.
5. make sure you have Unknow Sources and USB Debug Active , and also make sure that Superuser is replaced by SuperSU after reboot
6. Go to PlayStore and Download Android Terminal Emulator
and give in Terminal
Type "su" without quotes and than accept the permissions from SuperSU after that give in
----------------------------------------------------------------------------------------------------------------------------------
cat /mnt/sdcard/recovery.img >/dev/block/mmcblk0p1
sync
IF YOU USE UNSECURE BOOT tha use this
su
cat /mnt/sdcard/boot.img >/dev/block/mmcblk0p2
sync
Hope it helps and youv got it run :laugh:
Click to expand...
Click to collapse
Tried and looked like I'm typing in word lol, nothing happen, still android system recovery, not CMW.
Need CWM to wipe battery status, battery goes down to 93% in 1 min after full chagring.

ekiong said:
Sorry man, just had a bad feeling .
--------------------------------------------------------------------------
Tried and looked like I'm typing in word lol, nothing happen, still android system recovery, not CMW.
Need CWM to wipe battery status, battery goes down to 93% in 1 min after full chagring.
Click to expand...
Click to collapse
Remove micro sd from the phone.
Stick to the guide, pay atention to the phone screen behavior soo, keep the screen always on, in case of SuperSU ask for permition...
Dexter_nlb said:
......
GUIDE:
1. when you are running unlocked bootloader and is rooted goto step 2.
2. download attached zip files and extract content to internal sdcard location
3. use adb shell or terminal from market and execute the commands below
4. you are now running with native CWM recovery and unsecure boot, which enable adb root at boot instantly.
5. boot into recovery, by rebooting device and hold VOL-DOWN during bootup. (from power-off = keep holding vol-down during power on)
execute these 3 commands for recovery image install
Code:
su
cat /mnt/sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
execute these 3 commands for unsecure boot image install
Code:
su
cat /mnt/sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p2
sync
or see screenshot here
do this at your own risk, and do NOT try this on old 4.0.3, which is not with unlocked bootloader, and you are required to install KDZ again.
THANKS to:
skydev - for his continued effort in finding root and giving our device full freedom with boot/recovery.
Click to expand...
Click to collapse
Copy and past the command lines from the post, like that you'll be sure that you don't miss write the path.
And like I use to say, be creative
Good luck !

RuedasLocas said:
Remove micro sd from the phone.
Stick to the guide, pay atention to the phone screen behavior soo, keep the screen always on, in case of SuperSU ask for permition...
Copy and past the command lines from the post, like that you'll be sure that you don't miss write the path.
And like I use to say, be creative
Good luck !
Click to expand...
Click to collapse
Still no such file, I give up :angel:
Thx every one

ekiong said:
Still no such file, I give up :angel:
Thx every one
Click to expand...
Click to collapse
You tried this? Only the path changes, but... I ran out of ideas.
Like I told you, be creative. Change /sdcard/ to /sdcard0/... don't know man...
"01. You must have Root access (https://mega.co.nz/#!0opzyBjS!DSoW-CaTRi49JcW58yvwCCEug4hz6VmnevdJ1prcdpE)
02. Extract both *.img files somewhere
03. Copy those files to your phone (no matter if internal or external storage, I used /sdcard/Unlocking/ so below commands will contains my directory)
04. Run terminal app on your phone or adb shell from PC while you have connected phone
05. Run those commands:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p1
sync
REMEMBER!
If your folder is different than /sdcard replace it in those commands above!
Methods and necessary files are found also here: http://forum.xda-developers.com/showthread.php?t=2180138
All credits goes to Dexter_nlb from xda community."

RuedasLocas said:
You tried this? Only the path changes, but... I ran out of ideas.
Like I told you, be creative. Change /sdcard/ to /sdcard0/... don't know man...
"01. You must have Root access (https://mega.co.nz/#!0opzyBjS!DSoW-CaTRi49JcW58yvwCCEug4hz6VmnevdJ1prcdpE)
02. Extract both *.img files somewhere
03. Copy those files to your phone (no matter if internal or external storage, I used /sdcard/Unlocking/ so below commands will contains my directory)
04. Run terminal app on your phone or adb shell from PC while you have connected phone
05. Run those commands:
su
cat /sdcard/recovery-6028.img >/dev/block/mmcblk0p1
sync
su
cat /sdcard/unsecure-boot-mmcblk0p2.img >/dev/block/mmcblk0p1
sync
REMEMBER!
If your folder is different than /sdcard replace it in those commands above!
Methods and necessary files are found also here: http://forum.xda-developers.com/showthread.php?t=2180138
All credits goes to Dexter_nlb from xda community."
Click to expand...
Click to collapse
OH MY GOD I'm stupid, I copied files with ZERO byte.
sorry I used airdroid to copy them to my phone. But only their icons moved into my phone, not contents.
It works now THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS :laugh:
Close thread and my stupid problem :silly:

[Q] adb returning "error: closed"

Hi,
I'm currently trying to use adb to push some data into my phone but i always get "error: closed". I'm using windows 7 x64 and im running it from cmd.
Almost everything i tried using adb (push, shell, remount) returns this. I've searched over the forums and tried "adb devices" as well to see if my phone is connected, but what is different from the others is i am getting
List of devices attached
XXXXXX host
instead of what most other people got
List of devices attached
XXXXXX device
Is this a problem? What am i missing? Thanks a lot for ur time in reading this

Try:
Code:
adb usb
then
Code:
adb devices
or
Code:
adb kill-server
then
Code:
adb start-server
then
Code:
adb devices

Guich said:
Try:
Code:
adb usb
then
Code:
adb devices
or
Code:
adb kill-server
then
Code:
adb start-server
then
Code:
adb devices
Click to expand...
Click to collapse
Thank you! Although after doing these commands it still returned error:closed it listed my device as being in sideload mode so all sideload commands worked after that including sideloading a rom .zip

Did you update the SDK Manager??? Try updating that, my ADB problem were gone after i updated them.....

xlxcrossing said:
Thank you! Although after doing these commands it still returned error:closed it listed my device as being in sideload mode so all sideload commands worked after that including sideloading a rom .zip
Click to expand...
Click to collapse
I've got the same situation with "error closed" message. I ran the suggestions above but am still getting the error message.... Thoughts?

jflora1 said:
I've got the same situation with "error closed" message. I ran the suggestions above but am still getting the error message.... Thoughts?
Click to expand...
Click to collapse
Try to download this, un-zip and try the tips with this

Guich said:
Try to download this, un-zip and try the tips with this
Click to expand...
Click to collapse
I downloaded the zip but haven't had any success, still getting an error:closed message

ozo012 said:
I downloaded the zip but haven't had any success, still getting an error:closed message
Click to expand...
Click to collapse
which recovery are you on? (name and version number please)

nkk71 said:
which recovery are you on? (name and version number please)
Click to expand...
Click to collapse
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.

ozo012 said:
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.
Click to expand...
Click to collapse
isnt "error closed" something to do with out of date adb?

ozo012 said:
This is actually the only place I've found that might have had a solution to my problem (different device: Nexus 7, Stock 4.3 JWR66Y, unrooted, I'm attempting to sideload the 4.4 update but continually get this error:closed message.
Click to expand...
Click to collapse
Some people had solved the issue with the command:
Code:
adb usb
and after a reboot of device.
But seems don't work for all.
nkk71 said:
isnt "error closed" something to do with out of date adb?
Click to expand...
Click to collapse
Umh, no, i don' think

Guich said:
Some people had solved the issue with the command:
Code:
adb usb
and after a reboot of device.
But seems don't work for all.
Umh, no, i don' think
Click to expand...
Click to collapse
I haven't tried rebooting the device seems to be the only thing I left out.

I was having the same problems. Couldn't sideload. When I would run "adb devices" , my device would be listed. If I ran "adb usb" I would get "error: closed" . The sideload command would just bring up a list of commands. This may help someone, I installed a new version of adb. Not sure if I can post links but the file name was adb-setup-1.1.exe. This installs the needed files, the installer didn't notify me where the files were installed but they installed right to my C:\ drive. This seemed to eliminate the problem for me. I did a lot of searching and couldn't find anyone with this specific issue, so if anyone finds themselves with this problem give this a try.

worked for me
i had the same problem
i coulnt send anyfile to my htc one but after updating plate-form tools and replacing the old adb and fastboot files with the new ones
i entered the commend adb sideload rom.zip and it started sending the rom
and the phone was on twrp recovery-advanced-sideload

morheb said:
i had the same problem
i coulnt send anyfile to my htc one but after updating plate-form tools and replacing the old adb and fastboot files with the new ones
i entered the commend adb sideload rom.zip and it started sending the rom
and the phone was on twrp recovery-advanced-sideload
Click to expand...
Click to collapse
Yay. That Just worked for me using Crunchbang Debian. Thanks morheb that little tweak of using 'sideload' was the key

Can anyone help me push vold.fstab file with adb?
Stock Recovery on mediatek platform. with adb i got same error as this thread. Error:closed

KoolAidBigMan said:
I was having the same problems. Couldn't sideload. When I would run "adb devices" , my device would be listed. If I ran "adb usb" I would get "error: closed" . The sideload command would just bring up a list of commands. This may help someone, I installed a new version of adb. Not sure if I can post links but the file name was adb-setup-1.1.exe. This installs the needed files, the installer didn't notify me where the files were installed but they installed right to my C:\ drive. This seemed to eliminate the problem for me. I did a lot of searching and couldn't find anyone with this specific issue, so if anyone finds themselves with this problem give this a try.
Click to expand...
Click to collapse
Perfect - worked for me - exact same issue - adb wasnt recognising my phone was in sideload and sideload command wouldnt work but push would - plus getting error closed message on adb usb command. Googled the above adb file, downloaded, 15 second install and now sideloading is working on my SG2 with CWM recovery 6.0.2.9 (kitkat). I was obviously using an outdated ADB driver (1.0.29).
Thanks a lot KoolAidBigMan !! Big up...
Jimbo
EDIT : Spoke too soon - now getting another error when trying to sideload.. will google it.. failed to write data 'protocol fault (no status)'
EDIT : Sorted. Ended up getting round it by pushing the files instead - found instructions on Cyanogenmod forums. Thanks once again.

http://forum.xda-developers.com/sho...wQFjAA&usg=AFQjCNGgPmMne0aYCd9RojZZhy89cQjnCw
Try this
Sent from my C6916 using XDA Free mobile app

Link not working?? Im ok now anyway.. Time to test my screen casting to my Chromecast.. :fingers-crossed:

mtk6572 have same error
I have same error.. but I know that my phone's usb debugging is not enable.. so I got this error:close..
My phone is on bootloop so I can't enable the usb debugging.. Is there any way to enable the usb debugging using adb commands? I trying to push the framework-res.apk on my phone.. because it is the cause of the bootloop.
i'm a nood

problems when trying to reflash to stock

when trying to reflash to stock i keep getting this error below, when trying to side-load the update.
Thanks for the help.
C:\Users\Matt\Desktop\fastboot>adb devices
List of devices attached
4afb3763 sideload
C:\Users\Matt\Desktop\fastboot>adb sideload OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161d 2b234949.zip
loading: 'OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161 d2b234949.zip'
* cannot read 'OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161 d2b234949.zip' *

bumb

Flash with recovery, but also make sure ur bootloader is unlocked.

May be the file is corrupted . just check md5 to be sure.

I'm having the same problem. I can't boot into OS to turn on debugging or anything and the phone only loads to the oneplus loading screen.

If you are getting the "cannot read" error when sideloading in adb, you can try this handy tool call Large Address Aware (LAA). I was having the same problem on my Win10 Home 64bit system and managed to solve it using LAA.
Just download and unzip LAA to any folder. Run it and modify the adb.exe file. Now try sideloading and the "cannot read" error will be gone. Good luck.
For more details, follow the link
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Download LAA (attached)

I will try next time, I had to do the un brick way. Thanks

networx2002 said:
I will try next time, I had to do the in brick way. Thanks
Click to expand...
Click to collapse
Can I ask what OS you are using? I'm having a mare with windows 10 64bit and the drivers.
---------- Post added at 05:08 PM ---------- Previous post was at 04:55 PM ----------
fluster84 said:
If you are getting the "cannot read" error when sideloading in adb, you can try this handy tool call Large Address Aware (LAA). I was having the same problem on my Win10 Home 64bit system and managed to solve it using LAA.
Just download and unzip LAA to any folder. Run it and modify the adb.exe file. Now try sideloading and the "cannot read" error will be gone. Good luck.
For more details, follow the link
https://www.techpowerup.com/forums/threads/large-address-aware.112556/
Download LAA (attached)
Click to expand...
Click to collapse
After 3 days of messing around I've managed to push the update to the phone!
Thanks so much for your help mate :good: !

can anyone help me root my coolpad defiant?

Hello guys im new to these forums an did not know where to post at, i got a coolpad defiant (Not the best phone) an i wanted to root it and was seeing if anyone here maybe able to help me out?? ive tried to use kingRoot but not luck on using that method if anyone got any suggestions id really like that, thanks again!

rebz408 said:
Hello guys im new to these forums an did not know where to post at, i got a coolpad defiant (Not the best phone) an i wanted to root it and was seeing if anyone here maybe able to help me out?? ive tried to use kingRoot but not luck on using that method if anyone got any suggestions id really like that, thanks again!
Click to expand...
Click to collapse
Any luck?

Thank you very much

Jayfreshh said:
Any luck?
Click to expand...
Click to collapse
Did you ever find anything for this device?

remarkablecow913 said:
Did you ever find anything for this device?
Click to expand...
Click to collapse
Nothing as yet still searching, need to do some work on the phone but nothing to start with ?

Jayfreshh said:
Nothing as yet still searching, need to do some work on the phone but nothing to start with ?
Click to expand...
Click to collapse
I know. I can't find Any resources for this phone. I might get brave And see if I can find twrp for same chipset and try.
---------- Post added at 04:24 AM ---------- Previous post was at 04:23 AM ----------
remarkablecow913 said:
I know. I can't find Any resources for this phone. I might get brave And see if I can find twrp for same chipset and try.
Click to expand...
Click to collapse
Have you tried unlocking bootloader? That's probly most important. If it's locked there is no point tying

remarkablecow913 said:
I know. I can't find Any resources for this phone. I might get brave And see if I can find twrp for same chipset and try.
---------- Post added at 04:24 AM ---------- Previous post was at 04:23 AM ----------
Have you tried unlocking bootloader? That's probly most important. If it's locked there is no point tying
Click to expand...
Click to collapse
Okay if anything works out when you try let me know
The bootloader can be opened in developer mode for this devise if I'm correct

You can unlock bootloader in developer options but from there. I'm stuck and really want to get root and see what "deleted" files I can recover from a factory reset. Anybody ever try twrp for same chipset like someone was talking about doing?

rebz408 said:
Hello guys im new to these forums an did not know where to post at, i got a coolpad defiant (Not the best phone) an i wanted to root it and was seeing if anyone here maybe able to help me out?? ive tried to use kingRoot but not luck on using that method if anyone got any suggestions id really like that, thanks again!
Click to expand...
Click to collapse
[Update Anyone?]
I picked up a Coolpad 3632a yesterday and I've been trying to ROOT it for quite a while nowl; trying Kingroot v5.3.7 without PC, and KingRoot 3.5 on PC both failed to ROOT. I've been out of the loop for quite a while regarding Android devices and OS - the last Android Phone i owned was the LG G3 if i remember correctly. According to the available info I've found searching for Rooting Options for the coolpad 3632a it all seemed almost %100 easily rootable with or without PC mainly using Kingroot.
If anyone was successful in rooting this device (Coolpad 3632a / Android 7.1.1) - please let me know, my main goal is to find a good custom ROM and load it replacing the Bloat/Malware filled phone!
Thanks again to anyone who has taken the time to read and respond with any news (good or bad) on getting this device successfully rooted.
-=Mac3lite=-

Bootloader Unlock = Not happening on this device. At least yet.
Development = Absolutely none. Means no TWRP/ROMS etc.
Root = Nothing as of 10/10/2018.

phonecapone said:
Bootloader Unlock = Not happening on this device. At least yet.
Development = Absolutely none. Means no TWRP/ROMS etc.
Root = Nothing as of 10/10/2018.
Click to expand...
Click to collapse
EDIT: I just obtained temporary root.. seeing if it sticks.

Root for Coolpad Devices
NOTE: I have not tried this on your device but I have tried it on my Coolpad Mega 2.5 D , Coolpad Mega 3 and Coolpad Note 5 lite. You might try to see if this works on your Coolpad Device.
Requirements :
A working ADB setup
Procedureownload the Given Zip File and Extract Them in a folder.
CONNECT YOUR DEVICE TO PC
ALLOW USB DEBUGGING IN DEVELOPER SETTINGS:
OPEN THE FOLDER WHERE YOU EXTRACTED THE FILES AND RUN CMD.BAT
COPY AND PASTE THESE CODES ONE BY ONE IN ADB ....
Or RUN THE SCRIPT IN THE GIVEN FILE
Quote:
adb wait-for-device
Quote:
adb install magisksu.apk
Quote:
adb install rootcheck.apk
Quote:
adb install root.apk
Quote:
adb shell monkey -p com.yulong.openrp -v 500
Quote:
adb reboot
WAIT TILL THE DEVICE BOOTS
OPEN MAGISK APP & COPY AND PASTE THIS CODE :
Quote:
adb shell mount -o remount,rw /system
NOW :
Quote:
adb push magisk /system/bin
IF SUCCESSFUL, TYPE:
Quote:
adb shell magisk su
RUN THIS COMMAND AFTER EVERY REBOOT TO AGAIN GET ROOT ;
Quote:
adb shell magisk su
OR
Update magisk for permanent root.
Download::::::::
https://drive.google.com/file/d/1e1atRg7PQ2JyI8W88g1E9L9NihdGEjqO/view?usp=drivesdk

Yeah that's already what I tried previous to your post. Had zero luck. =/ Also after that point forward for some reason when i try to fastboot i cannot issue any commands and it displays "Secure Phone" at the bottom left of the screen. Whether or not it was due to this I do not know for certain.

phonecapone said:
Yeah that's already what I tried previous to your post. Had zero luck. =/ Also after that point forward for some reason when i try to fastboot i cannot issue any commands and it displays "Secure Phone" at the bottom left of the screen. Whether or not it was due to this I do not know for certain.
Click to expand...
Click to collapse
Does fastboot detect your device ? Or just the commands fail even after detection ?
Also , when your phone boots , does MTKlogger automatically start ?

dwaipayan774 said:
Does fastboot detect your device ? Or just the commands fail even after detection ?
Also , when your phone boots , does MTKlogger automatically start ?
Click to expand...
Click to collapse
It gets detected just the commands fail. There is a white "Secure Phone" line of text across the bottom left. Im going to try loading an sdcard to see if it will auto update anything.
I can't even use Flash Programmer in QFIL or many other apps in QDLOADER 9008 mode. I know the firehose is the correct one yet it never wants to boot. I don't know why.
MTKLogger might have before unless i'm thinking of a different handset here. But as of the moment it doesn't.

No luck with the sdcard. I think it's about time to factory reset this device and put it up for sale. I'll post the firmware here shortly.

Here is the firmware - https://forum.xda-developers.com/android/general/rom-coolpad-defiant-3632a-stock-t3855692

Temporary Root
phonecapone said:
Bootloader Unlock = Not happening on this device. At least yet.
Development = Absolutely none. Means no TWRP/ROMS etc.
Root = Nothing as of 10/10/2018.
Click to expand...
Click to collapse
What did you do? I've been trying for months now.

dwaipayan774 said:
NOTE: I have not tried this on your device but I have tried it on my Coolpad Mega 2.5 D , Coolpad Mega 3 and Coolpad Note 5 lite. You might try to see if this works on your Coolpad Device.
Requirements :
A working ADB setup
Procedureownload the Given Zip File and Extract Them in a folder.
CONNECT YOUR DEVICE TO PC
ALLOW USB DEBUGGING IN DEVELOPER SETTINGS:
OPEN THE FOLDER WHERE YOU EXTRACTED THE FILES AND RUN CMD.BAT
COPY AND PASTE THESE CODES ONE BY ONE IN ADB ....
Or RUN THE SCRIPT IN THE GIVEN FILE
Quote:
adb wait-for-device
Quote:
adb install magisksu.apk
Quote:
adb install rootcheck.apk
Quote:
adb install root.apk
Quote:
adb shell monkey -p com.yulong.openrp -v 500
Quote:
adb reboot
WAIT TILL THE DEVICE BOOTS
OPEN MAGISK APP & COPY AND PASTE THIS CODE :
Quote:
adb shell mount -o remount,rw /system
NOW :
Quote:
adb push magisk /system/bin
IF SUCCESSFUL, TYPE:
Quote:
adb shell magisk su
RUN THIS COMMAND AFTER EVERY REBOOT TO AGAIN GET ROOT ;
Quote:
adb shell magisk su
OR
Update magisk for permanent root.
Download::::::::
https://drive.google.com/file/d/1e1atRg7PQ2JyI8W88g1E9L9NihdGEjqO/view?usp=drivesdk
Click to expand...
Click to collapse
Any chance on a repost of the file?

dwaipayan774 said:
Root for Coolpad Devices
NOTE: I have not tried this on your device but I have tried it on my Coolpad Mega 2.5 D , Coolpad Mega 3 and Coolpad Note 5 lite. You might try to see if this works on your Coolpad Device.
Requirements :
A working ADB setup
Procedureownload the Given Zip File and Extract Them in a folder.
CONNECT YOUR DEVICE TO PC
ALLOW USB DEBUGGING IN DEVELOPER SETTINGS:
OPEN THE FOLDER WHERE YOU EXTRACTED THE FILES AND RUN CMD.BAT
COPY AND PASTE THESE CODES ONE BY ONE IN ADB ....
Or RUN THE SCRIPT IN THE GIVEN FILE
Quote:
adb wait-for-device
Quote:
adb install magisksu.apk
Quote:
adb install rootcheck.apk
Quote:
adb install root.apk
Quote:
adb shell monkey -p com.yulong.openrp -v 500
Quote:
adb reboot
WAIT TILL THE DEVICE BOOTS
OPEN MAGISK APP & COPY AND PASTE THIS CODE :
Quote:
adb shell mount -o remount,rw /system
NOW :
Quote:
adb push magisk /system/bin
IF SUCCESSFUL, TYPE:
Quote:
adb shell magisk su
RUN THIS COMMAND AFTER EVERY REBOOT TO AGAIN GET ROOT ;
Quote:
adb shell magisk su
OR
Update magisk for permanent root.
Download::::::::
https://drive.google.com/file/d/1e1atRg7PQ2JyI8W88g1E9L9NihdGEjqO/view?usp=drivesdk
Click to expand...
Click to collapse
hey the link is dead. could you make a new link?

Emulator-5554 error in fastboot

Im trying to install a fresh ROM and keep getting an error.
What am I missing? any insight is greatly appreciated.
ThANKS IN ADVANCE

I don't know if any of these will work but here are some things you can try:
1) Make sure you are on the latest sdk. I think latest is 30.0.4. Looks like you're using v30.0.0?
2) Try using adb -s ### sideload ***.zip. The ### is the the device id you get from adb devices. -s directs the command towards your phone instead of the offline emulator.
3) Try running adb sideload from the path where the zip is located rather than using quotes to include the entire long path. In other words: adb sideload Aosip***.zip. You may have to add the path to platform tools into your environment variables or include the path to adb in the command.

neo_lithic3K said:
I don't know if any of these will work but here are some things you can try:
1) Make sure you are on the latest sdk. I think latest is 30.0.4. Looks like you're using v30.0.0?
2) Try using adb -s ### sideload ***.zip. The ### is the the device id you get from adb devices. -s directs the command towards your phone instead of the offline emulator.
3) Try running adb sideload from the path where the zip is located rather than using quotes to include the entire long path. In other words: adb sideload Aosip***.zip. You may have to add the path to platform tools into your environment variables or include the path to adb in the command.
Click to expand...
Click to collapse
Its kind wierd, it only happens while trying to ADB sideload in the custom Boot.img (lineage, Aosip, etc)
but i have no problem flashing the boot.img vis bootloader.
Thanks for the response.

bignu77 said:
Its kind wierd, it only happens while trying to ADB sideload in the custom Boot.img (lineage, Aosip, etc)
but i have no problem flashing the boot.img vis bootloader.
Thanks for the response.
Click to expand...
Click to collapse
I don't think you're supposed to sideload a boot.img. usually the rom zips will install them as part of the install process

dragynbane222 said:
I don't think you're supposed to sideload a boot.img. usually the rom zips will install them as part of the install process
Click to expand...
Click to collapse
My bad, I worded that wrong it only happens once in the custom recovery and try to ADB sideload the rom, i get that error.
Fastboot boot.img via bootloader works fine.
My trouble starts one in custom recovery and it shows "emulator-5554". Please see attachment.
Thanks

bignu77 said:
Im trying to install a fresh ROM and keep getting an error.
What am I missing? any insight is greatly appreciated.
ThANKS IN ADVANCE
Click to expand...
Click to collapse
The computer is telling you what the error is. In fact adb tried to flash the ROM twice two different ways and still displayed the same error. "More than one device/emulator". The connection fails because you have another device/emulator/something connected to your computer that adb recognizes. Adb states that too. Adb will not flash to more than one device so you have to find what that thing is. Try removing things you have connected to your computer or the emulator, whatever it is, because we don't know. Or try what the other guy said, specifically method #2. You never replied wether or not you tried that specifically. That could work. One other thing, are you in the custom recovery selecting "apply update from adb/whatever it is" and trying to sideload it? Otherwise make sure to update the sdk too because we don't know if you actually tried that either.
Sent from my Pixel 4 XL using XDA Labs

bradical711 said:
The computer is telling you what the error is. In fact adb tried to flash the ROM twice two different ways and still displayed the same error. "More than one device/emulator". The connection fails because you have another device/emulator/something connected to your computer that adb recognizes. Adb states that too. Adb will not flash to more than one device so you have to find what that thing is. Try removing things you have connected to your computer or the emulator, whatever it is, because we don't know. Or try what the other guy said, specifically method #2. You never replied wether or not you tried that specifically. That could work. One other thing, are you in the custom recovery selecting "apply update from adb/whatever it is" and trying to sideload it? Otherwise make sure to update the sdk too because we don't know if you actually tried that either.
Sent from my Pixel 4 XL using XDA Labs
Click to expand...
Click to collapse
Thanks for clearing that up.
The only other thing connected it the cordless mouse reciever.
I also did update sdk platform. as shown in the attached. Yes i am trying to apply update from adb and then sideload command I also tried typing the specific file name instead of the whole path.
It only happens in adb mode. Flashing via fastboot works fine with no emulator error.
Ive been flashing for months using the standard adb method with no hiccups. Now im getting this error

SOLVED
I found it!! It was a game my kids downloaded that had a built emulator that causing the hiccup! Back to gold, thanks guys!!:good::highfive:

bignu77 said:
I found it!! It was a game my kids downloaded that had a built emulator that causing the hiccup! Back to gold, thanks guys!!:good::highfive:
Click to expand...
Click to collapse
Figured it something related to that, I'm happy you fixed it though, enjoy the ROM.:good: