I tried to flash Miui 9 on my Mi A2 with this install guide (https://forum.xda-developers.com/mi-a2/how-to/miui-10-install-guide-t3844729). But when i flashed Miui 9 MiFlash showed me it was succesful, but now I´m stuck at the MI Logo and cant go in fastboot mode. Also i think I can´t go in EDL-Mode because when i try to short the test points nothing happens. So neither MiFlash or Fastboot is recognizing my phone. What can I try?
Related
Hi Peoples,
I am getting bootloop after flashing China Dev, China Stable or Global ROM. My MI5's boot loader is already unlocked. So I don't need to flash via EDL mode. So far I am seeing below scenarios:
* Flash successful without edl mode - MI mi.com logo coming then suddenly restarting to the same state and again showing mi logo.
* Flash successful without edl mode - MI mi.com logo coming then ..... android logo coming then again looping the same thing. After couple of same loop then only mi logo looping!
I tried Mi Flash tool from fastboot ROM section, I tried another Flashtool from the en.miui forum and lastly I tried MiFlash Beta. But the same scenario.
I have also seen several times that, after flashing phone went to edl mode itself and could not be ON and none of the button combination works. Then I had to Flash again. However, still in boot loop. This is crazy!
Please help me out if you can!
Got the same problem - but i did not yet flashing any ROM, my xiaomi mi5 fall into boot loop after reboot (I did not changing any settings, or smth else).
Maybe someone can help in this situation? (my bootloader is locked)
Have you found any solution for this problem? I am experiencing the same issue when I tried to flash Chinese Rom to global rom in Mi5
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Hello everyone! so my redmi k20 pro which had a mi9t pro rom on it fell into some water. First it was ok and after a few hours it shuted down and now it stays on fastboot mode all the time.
The problem is that I can't get my 2 computers to recognize the device (tried with adb and xiaomi mi flash tool). Any suggestions before I just throw the phone away?
edit:
I managed to flash a stock rom with Mi Flash but the phone keeps going back to fastboot and I also tried to flash twrp but after the flash the phone goes back to fastboot. Any suggestions?
Any one?
I have my friends Xiaomi mi 8. It keeps freezing on the miui screen when booting up. It simply won't boot up. The bootloader is locked and I've tried everything. I've tried flashing new firmware via fastboot I've tried flashing twrp and orange fox I've even tried tried flashing pixel experience but the bootloader doesn't allow it. I've downloaded the XiaoMitool v2 and mi flash tool but nothing is working. When I boot to recovery and try to wipe data it just gives an error saying it's failed. I tried using the edl boot bat file and when it reboots to edl it just restarts and freezes on miui. ive tried edl from the back pins on the phone but the computer isnt recognising it and ive got the qualcom drivers installed but still no luck. Also when I try flashing miui fastboot firmware the program gives an error saying something about the flash script. Is there anything I can do to fix it or to atleast unlock the bootloader remotely without the need of the phone being turned on? ive heard of the msm tool but i coulnt find anything for the mi 8 only oneplus. Any help is appreciated thanks!
I had soft bricked redmi 4 mobile with locked boot loader, I could go to mi recovery 3.0 and fastboot etc. I tried to flash santoni 10.3 rom via fastboot mode but couldn't flash it with "critical partition error" due to locked bootloader. Then I entered edl mode by shorting test points, then successfully flashed rom with clean all option via miflash tool 'santoni_10.3 global', mobile started well and i used it 2 days. It shows ota updates available of 11.0.2nammixm in setting's updater. I downloaded it and after rebooting it left me mi recovery 3.0 and then I choosen reboot to system and got suck on mi logo again. It means i softbricked device again with locked bootloader. This time i again tried edl mode with miflash tool but it gives error "object reference not set as an object ". Don't know hot fix it. I tried 2 different miflash tool versions, both the fastboot roms "santoni 10.3 global" and "santoni 11.0.2 global" to flash, but getting that error again and again.
Sorry for my bad english.
Please help me, I can go into fastboot mode and edl with port 'qhsusb 9008 com10'
Crying...
Problem resolved,
I got revived again my redmi 4 mobile.
Solution is to try any older rom and older version of mi flash tool.
Suggestions-
Use santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz
And miflash-20220218 or miflash-20170425
Use Edl mode if you have locked bootloader,
Fastboot mode if having unlocked bootloader.
I will update my successes report if get managed to switch on miui 11 (currently having miui 8).