Has somebody checked how to enable VoLTE on unlocked Galaxy Note 8??
Look in settings of the phone app...
Well, in my case, enabling volte involved 2 steps, I received a sms from my carrier telling me that for using volte I had to go to them, there they issued me a new sim card AND they activated the service in THEIR system, with these two steps , the volte switch in settings became functional(no longer grayed out)
Yeah there is no setting present.
Earlier on Nougat we could get setting through Shortcut master app, but that failed on orea and even on pie.
So is there any other method to get volte setting.
I have US N950U1 model working in India.
The link is not working..
hakanercan said:
://youtu.be/sOxOPKSiZ2c
Click to expand...
Click to collapse
The link is not working..
Yup. I did already enable the VOLTE
Just head over the settings.
Once you're in there then just choose " CONNECTION "
then " MOBILE NETWORK ".
The VoLTE option has to be there under the name of " VoLTE Calls "
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This picture is from my phone.
Sounds like you need to check with your Service Provider
I just got the august security patch and now I have wifi calling and VoLTE option, it wasnt there before, my phone is the unlocked US version N950U1, the compilation version is the N950U1UEUDSH3
Related
If you don't already know, the unlocked Bell HD7's 3G bands are the needed bands required for AT&T (850,1900). I received my unlocked Bell HD7 from Negri Electronics today and I was super excited to get it going on AT&T here in The States but ran into a very weird problem...
Basically, I can't connect to 3G/HSDPA/EDGE internet. Now, the weird thing is that it SHOWS I'm using AT&T and that indeed I am on HSDPA (see pics below). Calling and messaging work fine BTW. If I want to do anything requiring data, the 3G/HSDPA/EDGE connection won't work and I'm forced to use wifi.
I'm tired of hard-reseting and flipping switches on and off... I just hard-reset the bastard one last time and now I wait for your advise. What do I do? Thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since it runs on the Bell firmware you must enable the data roaming. In the first pic that you posted it looks like you have it off. Give it a try and report.
Sent from my MB860 using XDA Premium App
can you post the "More Info" result ???
try downloading "connection setup" from the marketplace in the htc apps section, run it and you should be good to go.
B"H
Seems silly, but did you actually setup your APNs?
Not sure I saw that in the pics.
Good Luck,
Dovid
When the links were first published for 5.1, I flashed and installed the update through fast-boot and I am currently on 5.1 successfully. I have a t-mobile sim and I purchased this device from them. Today, they are pushing the 5.1 update which is the same as what I already have, but in addition, they are adding VolLTE. Now Im not sure if I already have that due to previously flashing it, or am I supposed to re-flash the T-Mobile variant of 5.1. Anyone have any input?
volte is voice over lte, making and receiving calls on lte. do you have volte?
simms22 said:
volte is voice over lte, making and receiving calls on lte. do you have volte?
Click to expand...
Click to collapse
How would I check if I do, Is it a setting?
The links were just posted today. you loaded it today? And have M not D or E?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not sure exactly how it works on t-mobile but I have a setting
Sent from my Nexus 6
flamingtiger said:
How would I check if I do, Is it a setting?
Click to expand...
Click to collapse
when you make a phone call, does the phone stay on lte or does it change to H or 3G during the call?
simms22 said:
when you make a phone call, does the phone stay on lte or does it change to H or 3G during the call?
Click to expand...
Click to collapse
Never-mind, I looked around and apparently the build number for the nexus 6 t mobile carrier is different (LMY47M). And Yes, its LTE. So i guess I just have to wait till the new factory images are posted to Google and then eventually side-load the update.
Can Jio sim work in Mi4 and can i use mi4 to buy it
I know it's a stupid question lol:silly:
No, Jio works only on 4G phones, and the Mi3W or Mi4W is a 3G enabled phone only.
Enable VoLTE in Mi3
Amruth Pillai said:
No, Jio works only on 4G phones, and the Mi3W or Mi4W is a 3G enabled phone only.
Click to expand...
Click to collapse
I got an update MIUI 8 Global 7.1.5 | Beta it shows support for JIO in Change log.
But, unable to find settings to enable VoLTE in preferred network type.
Please check screenshots and help to use Jio in Mi3.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks.
pnp4all said:
I got an update MIUI 8 Global 7.1.5 | Beta it shows support for JIO in Change log.
But, unable to find settings to enable VoLTE in preferred network type.
Please check screenshots and help to use Jio in Mi3.
Thanks.
Click to expand...
Click to collapse
That changelog is just a general one, not device specific.
I don't know why people keep asking how to enable 4G on a 3G phone through software. It is a hardware limitation and no software on earth can make a 3G receiver work on 4G frequencies because it isn't designed to work in that particular frequency at all.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adhd92 said:
View attachment 5282901
Click to expand...
Click to collapse
Did you call someone while this appeared?
I think that should indicate that your calling right now.
Check the phone's manual...
That could be the automatic call identify function which also update periodically via auto update. Details can be found in security settings.
This means wifi calling is enabled i.e. calls getting routed through the wifi network that you are on. Airtel (India) has enabled this feature for sometime now.
arindamb said:
This means wifi calling is enabled i.e. calls getting routed through the wifi network that you are on. Airtel (India) has enabled this feature for sometime now.
Click to expand...
Click to collapse
Oh wow. Yes. This one makes sense. Thanks
Any way to disable it? It's quite redundant if you ask me. Taking up that space.
adhd92 said:
Oh wow. Yes. This one makes sense. Thanks
Any way to disable it? It's quite redundant if you ask me. Taking up that space.
Click to expand...
Click to collapse
settings>Network & Internet> sim card and mobile network> Select the sim card you are using> scroll all the down and you will see wifi calling > tap on it > switch off.
or the easier way would be
settings> select search from top > type wifi calling > it will take you the same place then select and switch off
Today I will bring a fix for a common issue on sprint variants since they are setup for CDMA/roaming system instead of GSM, this is only for these ones who have unlocked already they sprint variant of M7 which is still able to be done by viper sim unlock helper app but it requires a downgrade, this will be explained in other post to help some users unlock their sprint variant.
As we know, every time we install a custom ROM, we may encounter that the SIM is not recognized or maybe we have roaming indicator, even using testing menu *#*#4636#*#* and setting the string to Global (Auto PRL) or LTE/UMTS (Auto PRL) doesn't seem to work on some people, this is happening due to the implementations made by the ROM developers since some of devs use the CDMA lines instead of GSM.
Some other ROMs comes prepared to face this issue but let's be honest, not all of them are good ROMs and may have more problems than other ROMs.
For now the fix is simplified in just one step, you guys should replace or delete some of your build.prop strings
Most common strings to remove is the telephony.LteOnCmda=1 string also there's other sprint strings that should be removed in build.prop, however I've attached a build.prop file in this post to share it, it was extracted from LOS 14.1 since it was the ROM I normally use, I have tested on other ROMs and the fix also works, but if you would like to add APN, you should use the build.prop attached here.
Screenshots CDMA LOS 14.1 enabled to GSM:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason WiFi Calling, VoLTE options are greyed out, it is because ROM blocks it, some other ROMs doesn't block these options.