Hi all,
I lost after installed TMRW 3.2.3.1, any one can help me how to revert or re-flash?
was tried flash with TMRW 3.2.3 and can detect USB-OTG but installation failed when install ROM V10.2.3.0.PFAMIXM
anyone can help me how to resolved this?
I'm using MI9 8GB
Google how to sideload using adb.
mohitgalaxy3 said:
Google how to sideload using adb.
Click to expand...
Click to collapse
the problem is I did not found global rom with ex. TGZ
Now I cannot access recovery mode.. just fastboot mode
trying manual flash with step from SITE
Installation success but bootloop and always go to recovery mode.
trying flash TMRW 3.2.3, flash from OTG got ERROR 7.
buatlo said:
the problem is I did not found global rom with ex. TGZ
Now I cannot access recovery mode.. just fastboot mode
Click to expand...
Click to collapse
You can find cepheus_global_images_V10.2.3.0.PFAMIXM_20190309.0000.00_9.0_global_ab3e2a70a8.tgz here
http://en.miui.com/a-234.html
problem resolved following step manual install via command prompt (ROM global developer)
http://in.c.mi.com/thread-334-1-1.html
now get updated, after download completed cannot install and re download again....
Okay, literally. What are you doing? How can you mess up this badly?
I would help you, but I can't figure out what you are saying.
You cannot "lose" your ROM after installing TWRP, it is not possible. You must have installed it as the system image or something.
"fastboot flash recovery twrp.img", how can you mess that up?
Anyway... I can't tell whether your problem has been resolved or not, but, be careful in the future.
Download and flash this twrp then flash factory rom
https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825
After flash factory rom,into fastboot,flash recovery.img in factory rom,you can unzip rom and find it
Or you can flash with fastboot update
Just Into
http://en.miui.com/a-234.html
And click fastboot update
Hi all, thanks for ur reply.. The problem solved after tried manual install via fastboot command prompt, got update via ota and succeed.
Now Im using developer rom, so far so good but I feed hot after play pubg and the battery bit wasteful than china rom.
Sent from my MI 9 using Tapatalk
Related
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
abdullah.ahsan11 said:
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
Click to expand...
Click to collapse
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Puddi_Puddin said:
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Click to expand...
Click to collapse
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
abdullah.ahsan11 said:
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
Click to expand...
Click to collapse
Why is it not working? Does it give an error or something?
Puddi_Puddin said:
Why is it not working? Does it give an error or something?
Click to expand...
Click to collapse
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Puddi_Puddin said:
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Click to expand...
Click to collapse
Yes It shows up correctly.
abdullah.ahsan11 said:
Yes It shows up correctly.
Click to expand...
Click to collapse
What is correctly? What does it say? You might want to try different ADB drivers. You should be able to always flash In fastboot..
abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Check again the bootloader to be unlocked. Use the tool for that, is it on OP3 forum, then retry to get a stock rom up before anything else (TWRP, custom rom, etc)
Sent from my OnePlus3 using XDA Labs
follow this instruction -
1- go into twrp and wipe everything even internal and formate it .
2- unistall all adb driver and oneplus driver also .. then clean tmp file from window
3rd- install latest adb+ oneplus 3 driver ..again restrat ..
4th-boot in fastboot mod and lock your bootloader
5th-flast latest build of oxygen stock recovery from fastboot
6th than again wipe or factory reset the device via stock recovery
7th open stock recoery than flash latest build of oxygen os via sideload
8th reboot the device and setup quikly
9th-unlock bootloader, flash bluespark recovery , flash rom, flash supersu ..
10th play with device
hello everyone
Buy a Chinese mi8, unlock it waiting for the days that xiaomi tells you.
I installed the global version, and everything works correctly, but I want to change the rom.
I've tried to install TWRP with adb and it's impossible, it tells me the ADB template that OKEY, but never restarts in recovery mode with TWRP, so I can not install magisk, or any rom that is not official.
Is there any way to install a ROM (.zip) without TWRP?, how do I do Root without magisk? Has it happened to anyone?
thanks!
First of all, you're in the wrong section.
Second you should install via fastboot as described a thousand times AND reboot directly to your TWRP image via fastboot command.
The you can flash another from and root it.
Third, I'd like to strongly advice you to do some research about android, flashing etc to make sure that you know what you are doing.... So many people are moaning about bricked devices....
trahzebuck said:
First of all, you're in the wrong section.
Second you should install via fastboot as described a thousand times AND reboot directly to your TWRP image via fastboot command.
The you can flash another from and root it.
Third, I'd like to strongly advice you to do some research about android, flashing etc to make sure that you know what you are doing.... So many people are moaning about bricked devices....
Click to expand...
Click to collapse
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?
cheteuk said:
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?
Click to expand...
Click to collapse
You are trying to be smart? Well...
Why didn't you post your exact steps with fastboot in the first post?
Now it's clear what you did wrong. I already expected it. And you did NOT read what I wrote:
You are rebooting your device with fastboot reboot. In this case your twrp is wiped out by the XIAOMI recovery. Use: fastboot boot yourimagename.
btw, why are you using such an old TWRP? You won't be able to flash actual roms.
So I'd like to come back to my advice in the first answer....
cheteuk said:
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?
Click to expand...
Click to collapse
fastboot boot recovery.img
not fastboot reboot
Sent from my MI 8 using Tapatalk
Vuska said:
fastboot boot recovery.img
not fastboot reboot
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I've tried twrp-3.3.1-0-dipper too, and fastboot boot xxxx.img.
And it hasn't been restarted either.
cheteuk said:
I've tried twrp-3.3.1-0-dipper too, and fastboot boot xxxx.img.
And it hasn't been restarted either.
Click to expand...
Click to collapse
Use the all in one tool, to remove encryption and flash a compatible TWRP.
tsongming said:
Use the all in one tool, to remove encryption and flash a compatible TWRP.
Click to expand...
Click to collapse
What is the all in one tool?
cheteuk said:
What is the all in one tool?
Click to expand...
Click to collapse
Try this. There is all you need.
https://tradingshenzhen.com/de/cont...sh-tutorial-global-firmware-xiaomieu-firmware
Upps, in German. You can choose English.
Goalach said:
Try this. There is all you need.
https://tradingshenzhen.com/de/cont...sh-tutorial-global-firmware-xiaomieu-firmware
Upps, in German. You can choose English.
Click to expand...
Click to collapse
Thanks for the help.
But all the steps that indicate, I have passed them and I never install the TWRP correctly.
1. my mobile phone is unlocked (with the padlock open)
2. I have the official rom installed
3. I try to install twrp with all the commands you have told me, and I never restart the mobile with twrp. I've tried new, intermediate and older versions. and nothing
Is there any way to install an unofficial rom without TWRP?
cheteuk said:
Thanks for the help.
But all the steps that indicate, I have passed them and I never install the TWRP correctly.
1. my mobile phone is unlocked (with the padlock open)
2. I have the official rom installed
3. I try to install twrp with all the commands you have told me, and I never restart the mobile with twrp. I've tried new, intermediate and older versions. and nothing
Is there any way to install an unofficial rom without TWRP?
Click to expand...
Click to collapse
You can't flash a ROM without TWRP and Magisk is the only way you can root your phone that I know of. If you don't even know these simple things/haven't done simple research you might risk to softbrick or even hardbrick your new and shiny phone. There are many guides on how to flash TWRP but you can PM me if you want more help.
Also you don't install TWRP with adb, you need to use fastboot...
cheteuk said:
What is the all in one tool?
Click to expand...
Click to collapse
The number 1 result
http://bfy.tw/Nvtb
You can try this
Make sure you have activated the usb debugging in developer options.
1. Download the tools from here: bit.ly/FlashToolMi8
2. Install the minimal_adb_fastboot_v1.3.1_setup
3. Copy the twrp-3.2.3-0-dipper.img to Minimal ADB and Fastboot Folder
4. Turn off your phone completely. then press power button + volume down to boot in fastboot mode.
5. Run CMD as Administrator then cd to the installed Minimal ADB and Fastboot folder. (Ex: cd C:\Program Files (x86)\Minimal ADB and Fastboot)
6. Use this command on your cmd: fastboot flash recovery twrp-3.2.3-0-dipper.img
7. Then: fastboot boot twrp-3.2.3-0-dipper
8. And: fastboot reboot recovery
9. You're now in twrp recovery mode
10. Copy Disable_Dm-Verity_FEC_v1.1 and Magisk-v18.1 to your phone
11. Install Disable_Dm-Verity_FEC_v1.1 from twrp
12. Then install Magisk-v18.1
13. Reboot, Your phone now rooted
I need help can't access adb only stuck in fastboot please help
tried xiaomi tool and didnt work, need to enable usb debugging please help
Flash stock rom with miflash.
Have you tried flashing TWRP then MIUI in TWRP?
Kollachi said:
Flash stock rom with miflash.
Click to expand...
Click to collapse
I'm getting an error "couldn't find flash script"
_MartyMan_ said:
Have you tried flashing TWRP then MIUI in TWRP?
Click to expand...
Click to collapse
I flashed twrp using the fastboot command many times but it doesn't install
I also tried the fastboot boot twrp.img but im getting an error
zydalili said:
I'm getting an error "couldn't find flash script"
Click to expand...
Click to collapse
did you download the correct file? did you download stock fastboot rom or stock flash rom?
It's okay now
I used miflash pro and downloaded the rom directly from the app. Now it's fully working again. Thanks for the help guys.
"Flash crclist error" in MI 9 cepheus
Hello, I deleted everything in my MI 9 cepheus, already tried with mi flash, with mi flash pro, with mi suite with xiaomi tools and I can not reset anything.
This happened after installing twrp with adb and within twrp do wipe cache / dalvik, the files were all coded and from there it was in fastboot mode and I can not do anything else.
In mi flash gives the error "Flash crclist error", and died ... peace to your soul :crying:
mavimendes said:
Hello, I deleted everything in my MI 9 cepheus, already tried with mi flash, with mi flash pro, with mi suite with xiaomi tools and I can not reset anything.
This happened after installing twrp with adb and within twrp do wipe cache / dalvik, the files were all coded and from there it was in fastboot mode and I can not do anything else.
In mi flash gives the error "Flash crclist error", and died ... peace to your soul :crying:
Click to expand...
Click to collapse
You have to lock bootloader again "fastboot oem lock" and that Will give you the error system hás been destroyed. Then put him um fastboot mode and flash with miflash tool. Last time that happend me i was in a fastboot loop it took me 5 days to discover.
Flashing Guide - Fastboot Update
Try fastboot ROM to flash new ROM by fastboot tool.
1.Fastboot tool: http://api.en.miui.com/url/MiFlashTool
2.Fastboot ROM download: http://en.miui.com/a-234.html (Find correct one for your device )
zydalili said:
I need help can't access adb only stuck in fastboot please help
tried xiaomi tool and didnt work, need to enable usb debugging please help
Click to expand...
Click to collapse
mavimendes said:
Hello, I deleted everything in my MI 9 cepheus, already tried with mi flash, with mi flash pro, with mi suite with xiaomi tools and I can not reset anything.
This happened after installing twrp with adb and within twrp do wipe cache / dalvik, the files were all coded and from there it was in fastboot mode and I can not do anything else.
In mi flash gives the error "Flash crclist error", and died ... peace to your soul :crying:
Click to expand...
Click to collapse
I had same thing happen to me. You need to force flash firmware. Another XDA member suggested to use miuiflashpro. And flash your phone's firmware back. Part of your phone's recovery has been erased I think. Choose keep data or flash all in settings an your cell will work again
Hello, thanks for the tips, Miflashpro nor detects the equipment... I've exhausted the ideas and options. I think I got a paperweight to put in the Office ?
mavimendes said:
Hello, thanks for the tips, Miflashpro nor detects the equipment... I've exhausted the ideas and options. I think I got a paperweight to put in the Office ?
Click to expand...
Click to collapse
You put him in fastboot mode? Because you only can flash in Miflash pro with fastboot mode
PRolo said:
You put him in fastboot mode? Because you only can flash in Miflash pro with fastboot mode
Click to expand...
Click to collapse
Yes, is in fasboot Mode.
Sent from my MI 9 using Tapatalk
Can you reflash twrp?
Then ADB sideload ROM?
Goto advanced twrp file manager and move ROM to internal storage?
Then flash ROM?
Follow first post in this thread:
https://forum.xda-developers.com/Mi-9/how-to/guide-how-flashed-twrp-xiaomi-eu-rom-t3912952
After all this was easier to solve than apparently it seemed. Just installed a new version of TWRP (3.3.1-34), the previous one although it indicated that it was nominated for the MI9, was not the best choice. After installing a new one, I uploaded the ROM(MIUI 10.5 by xiaomi.eu 9.6.20) to the root of the phone and installed it. It's all working again.
mavimendes said:
After all this was easier to solve than apparently it seemed. Just installed a new version of TWRP (3.3.1-34), the previous one although it indicated that it was nominated for the MI9, was not the best choice. After installing a new one, I uploaded the ROM(MIUI 10.5 by xiaomi.eu 9.6.20) to the root of the phone and installed it. It's all working again.
Click to expand...
Click to collapse
can you link me the one you downloaded? i installed twrp multiple times and it still wont go to recovery.
I rooted my phone but didn't really like it while having my banking apps on it. So I tried to get back to normal but ended up wiping everything, even the OS, off of my phone. I am trying to get it back to normal. I followed one guide on here which gave me an android 10 ROM but I was unable to update it to the latest version. The link for that guide is: https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835. I didn't install the force encrypt or the magisk because I don't wanna root it. I just want it back to how it was before the root. So I am wondering if there is a way that I can get back to normal now. Thanks in advance for any advice.
Tyche303 said:
I rooted my phone but didn't really like it while having my banking apps on it. So I tried to get back to normal but ended up wiping everything, even the OS, off of my phone. I am trying to get it back to normal. I followed one guide on here which gave me an android 10 ROM but I was unable to update it to the latest version. The link for that guide is: https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835. I didn't install the force encrypt or the magisk because I don't wanna root it. I just want it back to how it was before the root. So I am wondering if there is a way that I can get back to normal now. Thanks in advance for any advice.
Click to expand...
Click to collapse
well what is the problem ? if it booted and you didn't flash magisk you are on stock. ...what exactly do you want ? to lock the bootloader or remove twrp custom recovery too ?
KevMetal said:
well what is the problem ? if it booted and you didn't flash magisk you are on stock. ...what exactly do you want ? to lock the bootloader or remove twrp custom recovery too ?
Click to expand...
Click to collapse
The ROM was an earlier version of android 10. But I am unable to install the latest updates for android 10 OTA. It's working but I would like to be able to receive updates again. If there is another ROM that would give me those results I would be fine with flashing that too.
Tyche303 said:
The ROM was an earlier version of android 10. But I am unable to install the latest updates for android 10 OTA. It's working but I would like to be able to receive updates again. If there is another ROM that would give me those results I would be fine with flashing that too.
Click to expand...
Click to collapse
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
Awesome, thanks! I will try that later tonight or tomorrow.
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
So I downloaded a fastboot file from here :https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
The miui flash program wouldn't work for me. On the website you linked me there was a method that used twrp to flash it. But when use twrp I can't see any of the zip files in twrp. I've tried three different ones from the link I just shared here. Not sure what the problem is.
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
nevermind, I have gotten it to work. Thank you for your help
Tyche303 said:
nevermind, I have gotten it to work. Thank you for your help
Click to expand...
Click to collapse
okay glad you came right
half the fun is figuring this stuff out
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/rosemary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
OK nevermind I successfully got the phone booting again with miflash tool by reflashing an official firmware...
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/t/twrp-on-android-12.4522273/), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Click to expand...
Click to collapse
Hope it helps! ; D
dona3000 said:
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/ros mary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
Click to expand...
Click to collapse
Did u make sure ur on Miui 12.5.16.0.RKLMIXM?
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
fol!s said:
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
Click to expand...
Click to collapse
Greetings!
As this phone has an MTK processor, we don't really have a recovery image, it's stored in the boot img I suppose. That link, you can download the official rom to this. DISCLAIMER: There are two types of ROMs listed here, one type is fastboot, that you need now in order to flash it through a computer for example. The another type is the recovery rom, that you can flash from recovery like a magisk package, or anything flashable zip, or with adb sideload.
https://mifirm.net
You should choose global if you are in Europe, but it's suitable for devices in the US or USA probably, ony feature differences are here between an EEA and Global rom.
Also, if you install pixel experience recovery, you can install the firmware by going into recovery, and do it via sideload. Or, you can try flashing the rom with TWRP (tutorial linked below), but then you won't able to install updates automatically.
One question: Did you checked in OEM unlocking in developer options before flashed PE?
Hope it helps!
Yeah, I did checked the oem unlocking. I think the reason why i failed because my bootloader probably updated and I forgot to check. You need bootloader version 12.5.16.0.RKLMIXM to install the pixel experience. Also thank for help
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/members/gurtnyi.11842195), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Hope it helps! ; D
Click to expand...
Click to collapse
Can I do that on newer firmware or should I roll back to version 12.5.16.0.RKLMIXM? And if I roll back then I need to unlock device again?
I think you can. I've flashed it successfully on the latest version too. Currently I don't use PE but it was good for me.
Well, regarding to the unlock, it's not a big deal, you don't have to wait 168h again, once you've firstly unlocked your device, you can re-unlock it again, and again, no matter how many times, you don't have to wait a lot again.
But depending on how you rollback it,
I mean, with xiaomi flasher (i think that's its name) you can choose between clean all and lock, save userdata, and clean all, but in the first case, it'll lock back the bootloader. With SP flash tool (if you need, I can provide a link for the modified version of it, that doesn't require an auth file, but if fails, you need a python script, I can link that too), as I remember it won't lock back the device, but I'm not a 100% sure
Hope it helps!
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
raven17a said:
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
Click to expand...
Click to collapse
Corrected, thank you!
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
raven17a said:
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
Click to expand...
Click to collapse
Happy to hear that!
By the way, yes, pe recovery is better for sideloading, or eventually any not stock recovery. Also, if you install PE recovery, you can apply updates automatically, and in the future you won't need to flash it manually.