Database Develop

Request for oxygen os rom

Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..

Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
Also hoping for something like that :good:

Divyam2201 said:
Just wanted to ask if any developer can port an oxygen os rom for mi a2 as it is super fast and with some great features..
Click to expand...
Click to collapse
I think that would be super cool

Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom

fir1996 said:
Not gonna happen, due to lack of active devs, also it's very hard to port an oem rom
Click to expand...
Click to collapse
Somebody could ,,Re Port" IT from redmi Note 5 pro

StarSix01 said:
Somebody could ,,Re Port" IT from redmi Note 5 pro
Click to expand...
Click to collapse
It's possible , i know but some of the "big" devs here abandoned our device,, that's the problem...

I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable

StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Can you post a tutorial about how to make it work...

Divyam2201 said:
Can you post a tutorial about how to make it work...
Click to expand...
Click to collapse
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------
StarSix01 said:
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
Click to expand...
Click to collapse
I used Dec update vendor.img and boot.img

StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Got any fix for fingerprint and faceunlock??
And can you also make a twrp backup and post it

Anyone knows how to flash gsi roms on this device?

I tried to flash different gsi images and always get bootlop to fastboot mode.

jlorf7 said:
I tried to flash different gsi images and always get bootlop to fastboot mode.
Click to expand...
Click to collapse
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.

jlorf7 said:
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
Click to expand...
Click to collapse
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks

rajnathr said:
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
Click to expand...
Click to collapse
I know but with aonly always boot to fastboot mode, check in this it shows ab https://github.com/phhusson/treble_experimentations/wiki
I posted a mini guide in another thred: https://forum.xda-developers.com/showthread.php?p=80641265
Enviado desde mi NX629J mediante Tapatalk

I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!

Irwan Fauzi said:
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Click to expand...
Click to collapse
This Friday hope I will be testing maximum no. of GSI image and will be posting which boots and working better for Redmagic 3 in a separated thread for discussion with the community.
Also will backup such as Game launcher, LED Strip and other important app using titanium backup and will try to install as system to check if they are working or not.

Just flash the Chinese rom then flash TWRP and then go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development and pick any rom you want some of them even have GAPPS included
---------- Post added at 04:37 PM ---------- Previous post was at 04:31 PM ----------
If you're having trouble with GAPPS follow this steps
1) Boot into TWRP
2) Flash latest GSI img
3) Resize system file system (necessary on my device otherwise gapps will not install)
- Wipe -> Advanced -> select system -> resize file system
4) Flash pico or mini or aroma which ever you want gapps zip
6) Flash magisk zip
7) reboot

every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you try ab version?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???

Irwan Fauzi said:
Did you try ab version?
Click to expand...
Click to collapse
yes
suzook said:
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Click to expand...
Click to collapse
yes, yes and yes

I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Do you mind testing if game space work?

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.

Irwan Fauzi said:
Do you mind testing if game space work?
Click to expand...
Click to collapse
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
vimalrajan1988 said:
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Click to expand...
Click to collapse
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.

Red magic 3 treble
That's the thing with this phone. Everything is random. I did use the repair tool and flashed the latest global version. But I am unable to flash the gsi again. It keeps getting stuck in fastboot screen. But if I select recovery from fastboot. It does goes to twrp recovery. But nothing after that. I hope someone can make a custom rom with Nubia launcher.

Red magic NEEDS to provide us with fastboot images...We have no real way to recover from a semi brick WTF!

h4cxxc0r3 said:
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Click to expand...
Click to collapse
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.

Irwan Fauzi said:
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Click to expand...
Click to collapse
What app did you use to covert the .br file? Trying to make fastboot .IMG files.

suzook said:
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
Click to expand...
Click to collapse
I use termux app from play store.. There's a guide on xda how to extract system.dat.br without pc.. link

[CLOSED] Chinese TWRP for ONEPLUS 7T PRO

{Mod edit}
All sources gonna be linked here within two days

We will share all ours sources for team win as contribution to development on XDA
SOURCES: SOON

Is Decrypt working in oxygen os with this recovery?

Jackass94 said:
Is Decrypt working in oxygen os with this recovery?
Click to expand...
Click to collapse
No, sorry. Its still work in progress. Decryption is working only on custom roms for now

Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?

elmor0 said:
Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?
Click to expand...
Click to collapse
Depends on what your flashing

Custom ROMs

I will install in OOs Stock 10.0.8... Thanks.

jotha.dx said:
I will install in OOs Stock 10.0.8... Thanks.
Click to expand...
Click to collapse
It doesnt work with stock OOS AFAIK

EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
Afh... Thank you... I won't even try then....
Sent from my OnePlus7TPro Global using XDA Labs

I am waiting the custom oos

ricky886 said:
I am waiting the custom oos
Click to expand...
Click to collapse
What is that supposed to mean?

this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop

mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
Use the stock recovery with adb shell enabled.
Or flash the stock boot.img, enable adb debugging and flash the Magisk patched boot.img.
If adb debugging is enabled skip the upper part, use a PC and enter:
Code:
adb wait-for-device shell magisk --remove-modules
Done.

mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
alright i needed to have working system for this to decrypt. i installed the stock boot image system worked. then restarted now it decrypts
i can confirm this really works like back in the days when i used it in samsung galaxies

I van confirm that this works. It's installed and I made a backup with it. Nice work!!

EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working

Alexisd1 said:
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working
Click to expand...
Click to collapse
It DOES WORK but decryption is not working so it is useless

EugenStanis said:
It DOES WORK but decryption is not working so it is useless
Click to expand...
Click to collapse
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.

Alexisd1 said:
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.
Click to expand...
Click to collapse
You are wrong, decrpytion is working for me on this TWRP.

GUIDE How to Instal GSI ROM- Havoc-OS-v4.X-Official Android 11 On Redmi 8

Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com

Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....

letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery

D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry

Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !

Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer

UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...

letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?

letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems

Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...

letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)

Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...

Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .

Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.

letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse

Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .

Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?

mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11

letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.

Question pixel experience for redmi note 10s

why Pixel experience rom is not available for redmi note 10s yet?
i beg developers attention, plz make this rom for redmi note 10s

there is not an official TWRP, thats why.... but you can still install GSI roms

maur0p said:
there is not an official TWRP, thats why.... but you can still install GSI roms
Click to expand...
Click to collapse
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?

is there any change to release pixel experience for redmi note 10s

shiblu06 said:
I have some question
1. Does phone manufacture provide this twrp?
2. how can I install GSI ROMs?
3. Is there any possibility to release the twrp mode?
Click to expand...
Click to collapse
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released

J6idot said:
1. we already have twrp
2. fastbootd
3. what
Oh btw just to add, lineageos (built from source) booted, but don't expect it to be released soon, nor pixel experience to get released
Click to expand...
Click to collapse
but eventually note 10s will get pixel experience right , i mean without bugs

phoenixnithish2112 said:
but eventually note 10s will get pixel experience right , i mean without bugs
Click to expand...
Click to collapse
too late

does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you

kidbetin said:
does flashing a miui rom;for example miui14; using pe recovery lock the bootloader again?
is there way to flash to the new miui14 without locking back the bootloader?
thank you
Click to expand...
Click to collapse
No, you will get a nice bootloop if you try that

tutibreaker said:
No, you will get a nice bootloop if you try that
Click to expand...
Click to collapse
thank you
what rom can i flash with the pe recovery?

kidbetin said:
thank you
what rom can i flash with the pe recovery?
Click to expand...
Click to collapse
none if you want still have a phone to use

There is one rom now https://download.pixelexperience.org/rosemary/

Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
Flash a recovery on your device by typing (replace <recovery_filename> with the actual filename!):
Click to expand...
Click to collapse
fastboot flash boot <recovery_filename>.img
Click to expand...
Click to collapse
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments

portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
Hey, I ran into the same problem today. If I find a solution, I'll let you know. I would be glad if you share too.

I tried again yesterday to install Pixel Experience, and again it just boot loops when booting into recovery mode. I've now reinstalled stock Miui and will try again.

portcere said:
Has anyone installed the PE rom yet? I tried yesterday, following the instructions, and just got a boot loop after flashing the PE recovery rom.
However, the instructions confused me a little...
(My bold)
Should that be 'fastboot flash recovery' ??
Also, I'm not coming from stock but from a custom ROM (riceDroid). Would that make a difference?
Thanks for any (kind) comments
Click to expand...
Click to collapse
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?

xuser_0 said:
There no recovery partition so it shouldn't. I'm on this ROM currently and have no problems with installation. The guide says that you need to be on latest global a11 miui (12.5.16.0.RKLMIXM). You didn't miss that?
Click to expand...
Click to collapse
I've no idea what version of the bootloader I'm on as getprop ro.bootloader returns 'unknown'
But, as I'm on "latest" v13 Miui, I suspect the bootloader is the wrong one. Do I have to downdate to 12.5 before installing PE?
Edit: I've downdated the device to 12.5 RKLMIXM and have flased the PE recovery image, all okay. It's now installing the PE zip, so fingers crossed that's it.
Edit edit: I have PE on my device! Thank you at @xuser_0 for highlighting were I'd gone wrong.
The key @JohanGriman appears to be to ensure your device is not on the latest Miui but the latest 12.5 version.

Is there any instructions on how to install Magisk on this? I've tried to usual ways (via apk and flashing .zip thru adb sideload) but it fails to repack the boot image. Will a manual patch of the boot image and reflash work?
Edit: I've been able to directly patch the PE recovery image (as used in the installation process) using the Magisk apk on my device. Can I now flash this patched image to the device?
I don't want to try it as other instructions I've found talk about a vbmeta image that needs to be flashed too, and I don't know if that's necesary.... and I don't want to trash my device again!

Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.

xuser_0 said:
Just flash it but it will break safetynet. To fix safetynet enable Zygisk, add google play services to deny list and install shamiko.
Click to expand...
Click to collapse
Thanks, that worked perfectly