So there are many apps telling me that I cannot use them due to my phone being rooted. I use magisk hide and I have the app itself hidden, yet all apps still tell me that I'm rooted. I ran a safety net test and my phone did not lass with the error "response payload validation failed". I have the magisk hide props config module, but I have no clue how to use it once I'm in the menu in the terminal. Does anybody know a solution for this? Thanks.
Sounds like your device can't get a proper response from the Google servers. Might be something wrong with your Play services. But, that you can't hide root from other apps also suggests that there's something up with MagiskHide on your device.
But, it's very hard to say anything at all since we know so little about your setup. Take a look here for things to try and what to check for when troubleshooting:
https://www.didgeridoohan.com/magisk/MagiskHide
Lastly, MagiskHide Props Config won't help unless you already have a working MagiskHide setup.
I just cannot pass safety net whatsoever on magisk on my Moto X XT1053!
I'll start saying I have been on xda for years now and this is my first post, all you guys have helped me so much through the years so I have told myself recently I really need to start posting and being more active on XDA, you guys are way more brilliant than am but I'm slowly learning through the years. My obsession with unlocking and rooting started in 2013 with the Moto X xt1058 at&t unlocked bootloader on that one with sunshine fro Jcase and I was saddened when the phone messed up on me and had to retire it, now recently I found two developer editions an XT1053 and XT1060 , I'm running CM13 on the XT1060 so of course using Super SU on that one, but on the XT1053 the T-Mobile variant my main primary phone I am on stock lollipop 5.1 and unlocked bootloader and rooted running TWRP 2.8.7.0 and everything is great but drives me crazy because I cannot pass the Safety Net Test EVER, I flashed BusyBox ndk from osmosis and before I started I unSU and SuMounted and I uninstalled BusyBox app but I've tried everything, I thought it was because there were remnants of the BusyBox by stericson left in the system/xbin and that maybe that was throwing it off , I really want to stick with Magisk but it's driving me crazy that I cannot figure this out and pass the safety net I've searched the help manual from top to bottom front to back and all the threads and I can't figure it out
@jmac052002
Some basic info is needed:
Does both CTS and basic integrity fail?
Does MagiskHide work at all (test by adding a root app)?
Does your device conform to the basic requirements for MagiskHide to work?
Also, whenever trying to figure things out, it's good to provide logs:
https://www.didgeridoohan.com/magisk/MagiskHideHelp
I just cannot pass safety net whatsoever on magisk 19.0 on my Moto X XT1053!
Hey thanks for quick reply I am sorry I meant to give you that info earlier it fails both and one of the things I had forgotten was about the kernel in the basic requirements I have a 3.4.42, and I haven't posted 10 posts so it won't let me post outside links, I've always known to make questions relevant and not waste people's time is a big part of XDA so I wanted to respect that by not breaking these rules so that's why I have just began finally posting, if I can get the logs to you in another way I have them.
jmac052002 said:
Hey thanks for quick reply I am sorry I meant to give you that info earlier it fails both and one of the things I had forgotten was about the kernel in the basic requirements I have a 3.4.42, and I haven't posted 10 posts so it won't let me post outside links, I've always known to make questions relevant and not waste people's time is a big part of XDA so I wanted to respect that by not breaking these rules so that's why I have just began finally posting, if I can get the logs to you in another way I have them.
Click to expand...
Click to collapse
No need to post anything just yet. Take a look in the log and look for this:
Your kernel doesn't support mount namespace
Click to expand...
Click to collapse
If you see that there's no point in continuing the troubleshooting, because MagiskHide won't work on your device.
I just cannot pass safety net whatsoever on magisk 19.0 on my Moto X XT1053!
I checked the logs thouroughly and it never states Your kernel doesn't support mount namespace anywhere, so I think that's good news as far as the kernel goes...right?
I'm on the OP6 on latest 9.0.5 and have no issues.
Running stock as well as with nolimits mod. Franco kernel works well too
Do a clean wipe, format data, use latest Bluspark twro 9.96
You shouldn't have any issues
jmac052002 said:
I checked the logs thouroughly and it never states Your kernel doesn't support mount namespace anywhere, so I think that's good news as far as the kernel goes...right?
Click to expand...
Click to collapse
Possibly. You still haven't said anything about testing MagiskHide in general, and we'll need those logs (make sure they're from the Canary debug build).
Cannot pass Safety Net at all on Magisk 19.0 on Moto X XT1053
Sorry about that when I test it on root checker, it comes back that my phone is rooted and I checked my 3c Toolbox pro and it granted it superuser permissions so I'm assuming Magisk hide is not working, I work nights so I had to sleep but I am gonna install the canary bleeding edge and provide logs if it's still not working thanks for all your help so far
Updating on my situation, I realized my phone does indeed pass the safety et check, I forgot to hide the safety net checker. Issue is apps still I have root. I'm using the nintendo apps as a base tester.
Hello? Anyone got any ideas on what to do? Just checking back in.
Related
I want to root my device.
But I'm unable to decide that I should root via supersu or Magisk.
I've read that magisk provide systemless root, but what the advanteges of systemless root/magisk?
Can someone help me that what's the use/advantage of Magisk?
is it much stable then supersu?
I don't want to risk my device as I'm app developer
akash.galaxy07 said:
I want to root my device.
But I'm unable to decide that I should root via supersu or Magisk.
I've read that magisk provide systemless root, but what the advanteges of systemless root/magisk?
Can someone help me that what's the use/advantage of Magisk?
is it much stable then supersu?
I don't want to risk my device as I'm app developer
Click to expand...
Click to collapse
If you are an app developer, use Magisk. Magisk allows you to pass google's safety tests (Safetynet) - which you should know about if you develop apps! but basically, google will not think your device is compromised is you use Magisk, but WILL think your device is compromised if you use SuperSU - even if SuperSU is installed in Systemless mode. Don't forget to enable magisk hide in the Magisk Manager app to make sure this works though.
Some app developers will check safetynet upon launching their app to see if the device is compromised, and if it is, either restrict features, or deny access entirely. A good example of this is Banking apps, though they usually use their own root detection - but that can be hidden with Magisk Hide. - No bank wants their app being used on a compromised device, where a virus with root access could collect information. The more you know
manor7777 said:
If you are an app developer, use Magisk. Magisk allows you to pass google's safety tests (Safetynet) - which you should know about if you develop apps! but basically, google will not think your device is compromised is you use Magisk, but WILL think your device is compromised if you use SuperSU - even if SuperSU is installed in Systemless mode. Don't forget to enable magisk hide in the Magisk Manager app to make sure this works though.
Some app developers will check safetynet upon launching their app to see if the device is compromised, and if it is, either restrict features, or deny access entirely. A good example of this is Banking apps, though they usually use their own root detection - but that can be hidden with Magisk Hide. - No bank wants their app being used on a compromised device, where a virus with root access could collect information. The more you know
Click to expand...
Click to collapse
Thanks bro, and, is it stable too? I mean, are there any risks involved?
akash.galaxy07 said:
Thanks bro, and, is it stable too? I mean, are there any risks involved?
Click to expand...
Click to collapse
There are risks with any kind of root on your phone, as an app developer, you should know that.
You could get a virus that takes advantage of root to encrypt all of your files.
Again, you should know this if you are an app developer, there is a difference between creating a single app, and developing applications as a whole!
Magisk is very stable though, more so on OxygenOS but it will be pretty stable with LineageOS too! I have had no problems whatsoever! I have been using android pay and all my root apps without my phone ever crashing! And if you are careful, you won't get a virus (root will not cause a virus, user stupidity gets virus') - enjoy
I'd like to add the main advantage to why I use Magisk.
All my system modifications (build.prop changes, debloating, changed/removed ui audio, etc) are still there after a system update. Even if I have to do a clean install with a wipe, all it takes is flashing a couple of extra zips and everything is right back were I want it.
Didgeridoohan said:
I'd like to add the main advantage to why I use Magisk.
All my system modifications (build.prop changes, debloating, changed/removed ui audio, etc) are still there after a system update. Even if I have to do a clean install with a wipe, all it takes is flashing a couple of extra zips and everything is right back were I want it.
Click to expand...
Click to collapse
Can you please link me to Magisk installation thread for Oneplus 3t. I can't find any on XDA. I found one thread that belongs to Magisk dev but it is very confusing with installing all the systemless SuperSU and such.
vipivj said:
Can you please link me to Magisk installation thread for Oneplus 3t. I can't find any on XDA. I found one thread that belongs to Magisk dev but it is very confusing with installing all the systemless SuperSU and such.
Click to expand...
Click to collapse
There's no specific 3T thread that I know of... It's all there in the Magisk forums. It's not as complicated as it might seem.
If you're unrooted, just flash the Magisk zip in TWRP. Done!
If you have systemless SuperSU installed and want to keep it, just flash the Magisk zip in TWRP. Done!
If you have systemless SuperSU installed and want to switch to MagiskSU, you'll need to first remove SuperSU. Use the full unroot option in the SuperSU app and say yes when asked if you want to restore the boot image backup. After that, flash the Magisk zip in TWRP. Done!
If you have any other root installed, just flash the Magisk zip in TWRP and the installation script will do it's best to remove it and install MagiskSU instead. Done!
Edit: There might be variations on the above, depending on if you're using stock ROM or not. Take a look at the link in my signature if you run into problems. I've tried to collect as much info, tips and tricks as possible in one place.
Didgeridoohan said:
There's no specific 3T thread that I know of... It's all there in the Magisk forums. It's not as complicated as it might seem.
If you're unrooted, just flash the Magisk zip in TWRP. Done!
If you have systemless SuperSU installed and want to keep it, just flash the Magisk zip in TWRP. Done!
If you have systemless SuperSU installed and want to switch to MagiskSU, you'll need to first remove SuperSU. Use the full unroot option in the SuperSU app and say yes when asked if you want to restore the boot image backup. After that, flash the Magisk zip in TWRP. Done!
If you have any other root installed, just flash the Magisk zip in TWRP and the installation script will do it's best to remove it and install MagiskSU instead. Done!
Edit: There might be variations on the above, depending on if you're using stock ROM or not. Take a look at the link in my signature if you run into problems. I've tried to collect as much info, tips and tricks as possible in one place.
Click to expand...
Click to collapse
Thanks, it is clear now. Is it possible to 100% pass safety net with Magisk? I read somewhere that it's a hit and miss.
Apart from the Magisk modules what's the benefit of rooting with Magisk instead of superSU? I saw many people still support superSU than Magisk, does it mean that Magisk has some flows or bugs?
vipivj said:
Thanks, it is clear now. Is it possible to 100% pass safety net with Magisk? I read somewhere that it's a hit and miss.
Apart from the Magisk modules what's the benefit of rooting with Magisk instead of superSU? I saw many people still support superSU than Magisk, does it mean that Magisk has some flows or bugs?
Click to expand...
Click to collapse
I've had no issues passing SafetyNet on my OP3T. It depends on what ROM you're using and if you have any other modifications that Magisk Hide can't hide. Apart from Magisk Hide and systemless modifications Magisk is also open source, if you value that kind of stuff...
There might be apps out there that use specific SuperSU stuff and won't work fully with MagiskSU. I haven't had any issues though (apart from a couple of workarounds, like for Tasker - again, see my signature) and many app developers are starting to make their apps work with MagiskSU as well. Most work out of the box though.
MagiskHide
You can use apps like Android Pay or Snapchat on a rooted device
Didgeridoohan said:
I've had no issues passing SafetyNet on my OP3T. It depends on what ROM you're using and if you have any other modifications that Magisk Hide can't hide. Apart from Magisk Hide and systemless modifications Magisk is also open source, if you value that kind of stuff...
There might be apps out there that use specific SuperSU stuff and won't work fully with MagiskSU. I haven't had any issues though (apart from a couple of workarounds, like for Tasker - again, see my signature) and many app developers are starting to make their apps work with MagiskSU as well. Most work out of the box though.
Click to expand...
Click to collapse
Another noob question, what is the difference between normal and systeless SuperSU?
Considering current known problems Magisk have , isn't it a good idea to use Magisk superSU combo and SuperSU hide?
vipivj said:
Another noob question, what is the difference between normal and systeless SuperSU?
Considering current known problems Magisk have , isn't it a good idea to use Magisk superSU combo and SuperSU hide?
Click to expand...
Click to collapse
Systemless root doesn't alter /system... If you want a more in-depth explanation I'm sure your friend Google can explain it to you.
For OP3T on OxygenOS (I'm currently on 4.1.3) I've not experienced any issues with Magisk. I don't know what those "currently known problems" are that you're worried about...
Didgeridoohan said:
Systemless root doesn't alter /system... If you want a more in-depth explanation I'm sure your friend Google can explain it to you.
For OP3T on OxygenOS (I'm currently on 4.1.3) I've not experienced any issues with Magisk. I don't know what those "currently known problems" are that you're worried about...
Click to expand...
Click to collapse
I meant those issues happens with Tasker etc. Thank you for the answers, you've been very helpful.
I started googling and reading in XDA as well but you know the doubts that comes along ?
vipivj said:
I meant those issues happens with Tasker etc. Thank you for the answers, you've been very helpful.
I started googling and reading in XDA as well but you know the doubts that comes along
Click to expand...
Click to collapse
Ah... Ok. Those kind of issues are easy to work around and the next version of Tasker will have official MagiskSU support.
Use Magisk Manager
I also used Magisk Manager in my old device at it worked fine and as magisk allow you to root Android without effecting on system files I could also install root unsupported apps as well. So i think Magisk is the best solution for you.
link deleted by Moderator due to untrustworthy site will be a help full site to gather more info about magisk from one place.
Topjohnwu has strictly stated that any website which spreads Magisk is not official and cannot be trusted. The only official place is the XDA Thread. If you see any Member promoting an external site related to Magisk, please report the post.
EDIT: TOPJOHNWU IS WORKING ON A FIX RIGHT NOW, WAIT FOR MAGISK 13 RELEASE OR ENABLE CORE ONLY MODE AS A TEMP FIX.
Posting this from my phone so sorry for any errors here.
Google seems to have updated safetynet within the last few hours, on 2 devices. That previously passed with magisk. There is an easy way to fix it, that I don't really want to post here as Google probably read the forums. Let's just say it's easy to fix, but you not using modules any more. Hoping for an update soon if that's possible and I can provide any logs or details to the dev if needed.
manor7777 said:
Posting this from my phone so sorry for any errors here.
Google seems to have updated safetynet within the last few hours, on 2 devices. That previously passed with magisk. There is an easy way to fix it, that I don't really want to post here as Google probably read the forums. Let's just say it's easy to fix, but you not using modules any more. Hoping for an update soon if that's possible and I can provide any logs or details to the dev if needed.
Click to expand...
Click to collapse
Yeah, it seems like Google has updated SafetyNet, now I can't pass the check
Sent from my Pixel using Tapatalk
Same here.
Using Galaxy s6, same here.
Thanks it works
Glad to know I'm not the only one. They will probably patch what I've done later on but at least I can still use my phone with root. Can back to stock as I'm on a OP3T but I don't want to lol
So i need to uninstall my youtube ad free module?
bam099 said:
Same here.
Click to expand...
Click to collapse
Yep... may not be related, but noticed random "unable to parse data" toast messages earlier today. Later caught google play downloading. Killed download, then ran safetynet check. Failed CTS profile mismatch. Again, any of those symptoms could be unrelated. Just reporting anomalies.
bummer
Nexus 6 running Pure Nexus 7.1.2 on Magisk v12.0
SafetyNet Failed: CTS profile mismatched
Yeah, looks like another swing from Google.
how can i pass safteynet i cant get to hide my root to log into snapchat
Same here it definitely updated. Haven't done anything with my phone in a while. Suddenly failing the check
I thought i was the only one
If you can live without modules, enable 'Magisk Core Only Mode' in Settings and you'll pass SafetyNet again.
Works but..
blk_jack said:
If you can live without modules, enable 'Magisk Core Only Mode' in Settings and you'll pass SafetyNet again.
Click to expand...
Click to collapse
I have a problem with Mario run, safetynet pass And magisk hide is enabled but Mario run always give me the 804-5100 error code
Btw, it seems not all modules trigger SafetyNet. My suggestion to people is to test each module one at a time and see which are affected.
To do this:
- Disable all modules
- Enable the first module
- Reboot
- Check if SafetyNet passes
- Disable the first module and enable the second
- Reboot
- Check if SafetyNet passes
- Repeat.......
angelus_kun said:
I have a problem with Mario run, safetynet pass And magisk hide is enabled but Mario run always give me the 804-5100 error code
Click to expand...
Click to collapse
Maybe try clearing data in the game. You might have tripped a flag and the game is remembering that your device has failed.
blk_jack said:
Maybe try clearing data in the game. You might have tripped a flag and the game is remembering that your device has failed.
Click to expand...
Click to collapse
Nope, i tried that before And dosen't work, irñts very strange because on my moto G4 with magisk hide And safetynet pass i was able to play without issues until now, And i don't know why because i have the same modules like before, And i have the same issue on my galaxy Tab A6 t280 with the same modules, safetynet pass etc :\
---------- Post added at 03:10 AM ---------- Previous post was at 02:42 AM ----------
andybfmv96 said:
Same here it definitely updated. Haven't done anything with my phone in a while. Suddenly failing the check
Click to expand...
Click to collapse
Mario run work again i solved the issue deleting all modules enable magisk core And systemless host (for adaway at least) magisk hide with Mario run selected, clear Mario run data And reboot oh Well :/ bye bye to ad away OGyoutube module
angelus_kun said:
Nope, i tried that before And dosen't work, irñts very strange because on my moto G4 with magisk hide And safetynet pass i was able to play without issues until now, And i don't know why because i have the same modules like before, And i have the same issue on my galaxy Tab A6 t280 with the same modules, safetynet pass etc :\
---------- Post added at 03:10 AM ---------- Previous post was at 02:42 AM ----------
Mario run work again i solved the issue deleting all modules enable magisk core And systemless host (for adaway at least) magisk hide with Mario run selected, clear Mario run data And reboot oh Well :/ bye bye to ad away OGyoutube module
Click to expand...
Click to collapse
Did you even read OP's post? Google updated a security patch and now most of us can't pass SafetyNet.
MiuKing said:
Did you even read OP's post? Google updated a security patch and now most of us can't pass SafetyNet.
Click to expand...
Click to collapse
Yes And the solution is don't use modules anymore that work for me And you And everyone Even if you pass safetynet you need to enable magisk core to use broken apps like Mario run
I can confirm that enabling "Core Only Mode" in Magisk Settings does pass SafetyNet.
(Sigh), now magisk modules break SafetyNet. Now what do we do?
Hi
I'm using a Samsung Galaxy S4
I rooted the stock Samsung rom with SuperSU prior to install Magisk
At first I couldn't install 13.3 I had to install 12.0 because of some unknown reason installing 13.3 I got the error image mount failed same with all previous 13. versions however now 13.3 is now installed and SuperSU isn't installed.
When I run the SafetyNet Check in Magisk it reports:
ctsProfile: false
basicIntegrity: false
I want to be able to use apps like Android pay and such
Can someone please help me with getting this to work
Thanks!
Magisk v12.0 can't pass SafetyNet without workarounds like Universal SafetyNet fix module (and since the last update to SafetyNet a few days ago I've no idea if that works either).
You can't use Magisk to pass SafetyNet with SuperSU installed.
Here's some reading for you:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Pro tip: Try using the search function and browse the stickied threads before posting. There are very few things that hasn't been covered already in one way or another...
Didgeridoohan said:
Magisk v12.0 can't pass SafetyNet without workarounds like Universal SafetyNet fix module (and since the last update to SafetyNet a few days ago I've no idea if that works either).
You can't use Magisk to pass SafetyNet with SuperSU installed.
Here's some reading for you:
https://forum.xda-developers.com/apps/magisk/magisk-magisk-hide-troubleshooting-tips-t3561828
Pro tip: Try using the search function and browse the stickied threads before posting. There are very few things that hasn't been covered already in one way or another...
Click to expand...
Click to collapse
I've got 13.3 installed and SuperSU isn't installed plus I've already read a lot on this subject and most of my searches did nothing for me that's why I thought I would make a thread to see if anyone could help me.
AyanamiRei0 said:
I've got 13.3 installed and SuperSU isn't installed plus I've already read a lot on this subject and most of my searches did nothing for me that's why I thought I would make a thread to see if anyone could help me.
Click to expand...
Click to collapse
That was not very clear from your first post...
If you haven't already, start by reading through the link I posted. You wan't post #4.
Didgeridoohan said:
That was not very clear from your first post...
If you haven't already, start by reading through the link I posted. You wan't post #4.
Click to expand...
Click to collapse
Interesting trying to start magiskhide manually does nothing.
You could have remnants of Su on your phone. Even if you use the full uninstall method you can have leftovers. Tried a complete fresh reinstall?
phuhcue said:
You could have remnants of Su on your phone. Even if you use the full uninstall method you can have leftovers. Tried a complete fresh reinstall?
Click to expand...
Click to collapse
Oh it's working fine now installing Lineage OS and then install Magisk and it works perfectly.
With me my experiments with magisk in the past left some files in my data partition behind which makes safetynet fail.
I found them by going into twrp recovery, starting and adb shell and then executing find . | grep -i magisk
the two files i found were:
data/data/com.google.android.gms/files/backup_diff_script/com.topjohnwu.magisk
data/property/persist.magisk.hide
i deleted them with rm and safety net worked again.
So I can confirm that for my phone, unlocked bootloader, custom modem and custom recovery does not matter at all. But if your filesystem still contains traces of magisk, is a nono for google safetynet, pretty silly this road they are taking here.
safety net
i have the same problem on galaxy note 3 with magisk 15.3 on my galaxy s7 everything is ok but in note 3 i have safety net false...
can anyone help me?
spanpana said:
i have the same problem on galaxy note 3 with magisk 15.3 on my galaxy s7 everything is ok but in note 3 i have safety net false...
can anyone help me?
Click to expand...
Click to collapse
Old device... If the kernel version is lower than 3.8 it'll likely not have support for mount namespace and MagiskHide won't work. A custom kernel or ROM might work...
Didgeridoohan said:
Old device... If the kernel version is lower than 3.8 it'll likely not have support for mount namespace and MagiskHide won't work. A custom kernel or ROM might work...
Click to expand...
Click to collapse
thank's for your reply...!
i have custom rom resurection remix v.5.8.2 but i didnt change the kernel can you explain me how to do that please because i don't know...?
spanpana said:
thank's for your reply...!
i have custom rom resurection remix v.5.8.2 but i didnt change the kernel can you explain me how to do that please because i don't know...?
Click to expand...
Click to collapse
Check your kernel version first (usually found in Settings - About Phone). If it's less than 3.8, ask for help in your device's forum for if there's any custom kernels or ROMs available with an updated kernel.
Didgeridoohan said:
Check your kernel version first (usually found in Settings - About Phone). If it's less than 3.8, ask for help in your device's forum for if there's any custom kernels or ROMs available with an updated kernel.
Click to expand...
Click to collapse
ok my friend thank you very much...!:laugh::good:
Didgeridoohan said:
Old device... If the kernel version is lower than 3.8 it'll likely not have support for mount namespace and MagiskHide won't work. A custom kernel or ROM might work...
Click to expand...
Click to collapse
That's interesting. I get the same message on my old phone (running the 3.4.113 kernel), but I'm unable to even open Mario Run if MagiskHide is disabled. But when it's enabled, the game runs just fine. Is that normal? I thought Mario Run made use of SafetyNet... I'm using microG + DroidGuard Helper. I've tried running Android Pay, but I get this error message. But I'm not even sure if Android Pay is supposed to work since I'm using microG... What other apps use SafetyNet so I can try them?
Thanks.
robotsrules said:
That's interesting. I get the same message on my old phone (running the 3.4.113 kernel), but I'm unable to even open Mario Run if MagiskHide is disabled. But when it's enabled, the game runs just fine. Is that normal? I thought Mario Run made use of SafetyNet... I'm using microG + DroidGuard Helper. I've tried running Android Pay, but I get this error message. But I'm not even sure if Android Pay is supposed to work since I'm using microG... What other apps use SafetyNet so I can try them?
Thanks.
Click to expand...
Click to collapse
MagiskHide can't do it's thing to hide itself on such an old kernel, but it can still hide sensitive prop values. That's why Mario Run works... IIRC it looks for ro.debuggable, on of the props changed to "safe" values by MagiskHide.
Didgeridoohan said:
MagiskHide can't do it's thing to hide itself on such an old kernel, but it can still hide sensitive prop values. That's why Mario Run works... IIRC it looks for ro.debuggable, on of the props changed to "safe" values by MagiskHide.
Click to expand...
Click to collapse
Oh, I get it now... Thanks
I'm trying to use this app: play.google.com/store/apps/details?id=br.com.banrisul
I've added to the hiding list and enable core only mode, it still closes at startup after saying my phone is either root or running a modified system. I've tested with rootbeercheck and it doesn't detect root in any of its tests.
i.imgur.com/60Zs5IH.png
No issues opening the app here... That means Magisk is perfectly capable of hiding from it, but you might have something else in your setup that triggers it.
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Didgeridoohan said:
No issues opening the app here... That means Magisk is perfectly capable of hiding from it, but you might have something else in your setup that triggers it.
Click to expand...
Click to collapse
but what exactly would trigger it? The link talks mostly about methods to hide magisk, I didn't find anything about what to do if magisk is working but the check fails. I've uninstalled titaniumbackup and rootbrowser. I've disable adb and developer options, I've deleted any folder or downloaded file related to magisk or those apps.
I'm running lineageos, would that be it? How would I go about it?
Could be any number of things... Your ROM might be one of them (more details about that?). It's pretty much impossible for me to do anything else but make educated guesses. The only thing I can say with relative certainty is that it shouldn't have anything to do with Magisk (since I can hide from the app just fine when testing).
You do pass SafetyNet, right? Could be that this is one of those apps that actually use SN.
Didgeridoohan said:
Could be any number of things... Your ROM might be one of them (more details about that?). It's pretty much impossible for me to do anything else but make educated guesses. The only thing I can say with relative certainty is that it shouldn't have anything to do with Magisk (since I can hide from the app just fine when testing).
You do pass SafetyNet, right? Could be that this is one of those apps that actually use SN.
Click to expand...
Click to collapse
It passes both checks.
I am running lineage OS 14.1 (Android 7.1.2) on a moto g4.
My main guess is that it's detecting something about your ROM. LOS is well known enough for apps to look for certain properties of it.
Didgeridoohan said:
My main guess is that it's detecting something about your ROM. LOS is well known enough for apps to look for certain properties of it.
Click to expand...
Click to collapse
Yes, after searching around a bit more I found about why. I completely forgot that I had flashed supersu on my phone before flashing magisk. So I guess that's what the app was freaking out about. So I flashed a supersu removal and reflashed my ROM, now the app is working normally
Thanks for the help!
Same problem
Hello everyone
After the last update of my banking app and wallet too
Both apps stopped starting due tl root device detection
While it was working well yesterday
I just updat apps to the last version
I think these app's developers find a way to detect magisk
Of course im hiding and randomly renaming it
hammohammo said:
Hello everyone
After the last update of my banking app and wallet too
Both apps stopped starting due tl root device detection
While it was working well yesterday
I just updat apps to the last version
I think these app's developers find a way to detect magisk
Of course im hiding and randomly renaming it
Click to expand...
Click to collapse
What version of the application do you want?
I have the latest version installed and it does not detect root
The new Magisk is here and with it some major changes. One of the most important is the removal of support for "MagiskHide". There are many advanced users who have figured this all out already and few (maybe more) like me who are just kind of lost not knowing what should be exactly done to be able to update and be able to use Magisk as they were, before the update.
I was hoping that a kind soul would put up an easy step by step guide to help these users and at the same time it will avoid a lot of repetitive questions on the main thread. I personally spent a long time reading many pages and was not able to fully understand what should be done.
In my case all I want to achieve is to update and be able to hide Magisk like it was in the previous version. Should I start by un-hiding it first before doing the update?
(what and how and from where) should I add something that will replace the hiding function? Viola! these are the kind of simple questions that will help some of us get going
I hope that someone will bring his precious help
Yeah I unfortunately did my upgrade and fought with the whole process for 6 hours straight (lol) and I still don't know what I did exactly to even begin to write any instructions - other than 6 hours straight of reading and trying and hoping .....
Not sure if you have been able to refer to this which helped me.... But, I also have an very basic understanding of how my device (OnePlus 7T) works with Magisk... Hope this helps. May be see if your specific device has the instructions already posted in the device specific forum here?
Installation
The Magic Mask for Android
topjohnwu.github.io
I've not used the Magisk hide cause I haven't needed it - BUT, it's still available in the latest Magisk Manager (24.1) in the Magisk Manager settings. I'm only using the systemless hosts module (included in Magisk manager settings) for Adaway, and the universal safety net fix to get Google Play store to say my device is certified.
But I don't know what device you have nor do I know the specific ROM you are using.
Sounds like you have root already so I'm thinking that's the worst of this behind you if you've already done that much yourself. Sounds like it's a basic case of update the Magisk Manager app from itself then determine the method appropriate for root to update which could be through the Manager app or like I chose to use the boot IMG then patch that then install since my device has no working TWRP. That, and once I updated the manager app and panicked so I uninstalled it to try and downgrade to v23 .... Good luck and may be just don't update just yet if there is no specific need to at this time. Take your time and read and proceed when comfortable.
Please:
Start with your preferred method of backing up everything first.
Also, may be consider if it's necessary to update and why??? I'm on stock Andriod 11 and this Magisk update make me think it's intended to be more for those on Android 12 - but I could also assume wrongly.
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
That's the thread I'm reading now...
Thanks a lot for your reply wugga3. I also on my side found two very helpful posts. They explain the basics (just to get started) and to make the update . I hope with the information gathered I will be able to do the update without messing things up!
[Discussion] Google Pay Magisk Discussion Thread
This thread is inspired by the PoGo Magisk discussion thread. It's meant to keep the clutter of "Google Pay doesn't work" posts out of the main Magisk threads. Please use this to discuss issues with Google Pay and possible solutions. There's a...
forum.xda-developers.com
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Good and good luck...
One problem and probably the only problem I really had was self inflicted for not following the instructions properly and that was to uninstall any Magisk modules first or at that the appropriate step.
Other than that... still don't know your device or rom etc. Your device specific or rom specific forums may be able to provide you with much better assistance from members that have the same rom/device as you.
wugga3 said:
Good and good luck...
One problem and probably the only problem I really had was self inflicted for not following the instructions properly and that was to uninstall any Magisk modules first or at that the appropriate step.
Other than that... still don't know your device or rom etc. Your device specific or rom specific forums may be able to provide you with much better assistance from members that have the same rom/device as youI
Click to expand...
Click to collapse
I am using LineageOS 18.1 Android 11 for Samsung Galaxy Note 3 and I have twrp as recovery. Magisk 2.30 is already installed and device is rooted. I have no modules installed and in Magisk settings I have only MagiskHide enabled. All other settings are set to default. On Samsung Note3 forum there is no talk about this (understandable as the device is very old).
Ok great and is there any discussion for lineage 18.1 and root/update?
Since it's lineage 18 and based on Andriod 11 - I have to wonder if there is even the need to update Magisk as my limited understanding is that the Magisk update is aimed at Andriod 12? Other than that... I should expect from my prior understandings of Samsung that nothing much has changed with respect to root and updates of Magisk. Not much help but hopefully enough. May be best to wait until for now and usually I do also wait until all the facts are in and the bugs are sorted out (if any...) before I update if unnecessary.
Thanks wugga3,
I disabled "Check for updates" in Magisk app and decided to keep the older 2.30 version for now. Everything is working fine and so there is no reason to fix something which is not broken. The only reason I thought That I should update was a real advantage over the older version or a security weakness being fixed in the new one.
I am even seeing some people asking for help on how to downgrade! Anyway as you said wisely, it;s not after all a bad idea to wait a little to see how things work out for those who have upgraded and have new issues fixed before taking the jump.
Moving from 23.0 to 24.1 is straightforward
1. Update app
2. Update boot (Magisk) to 24.1, reboot
3. Enable Zygisk, reboot
4. Enforce Deny List, reboot
5. Install module USNF, reboot
6. Configure Deny List. Don't worry about Play Service because USNF will take care of it. Add any app detected root into it, and reboot every time it's updated
7. Install Fox Module manager and pick module you want
mingkee said:
Moving from 23.0 to 24.1 is straightforward
1. Update app
2. Update boot to 24.1, reboot
3. Enable Zygisk, reboot
4. Enforce Deny List, reboot
5. Install module USNF, reboot
6. Configure Deny List. Don't worry about Play Service because USNF will take care of it. Add any app detected root into it, and reboot every time it's updated
7. Install Fox Module manager and pick module you want
Click to expand...
Click to collapse
Thanks a lot for your post mingkee,
I am sure many like me will be happy and appreciate reading this instead of having to go through many pages and still not be totally sure what to do
Allow me to just ask one question as I did not understand the second option of your instruction:
I update Magisk from the application itself. Once updated what do you mean by update boot to 24.1? This is to be done in Magisk itself?
rezpower said:
Thanks a lot for your post mingkee,
I am sure many like me will be happy and appreciate reading this instead of having to go through many pages and still not be totally sure what to do
Allow me to just ask one question as I did not understand the second option of your instruction:
I update Magisk from the application itself. Once updated what do you mean by update boot to 24.1? This is to be done in Magisk itself?
Click to expand...
Click to collapse
After updated app to 24.1, you will see another update on top of the app (Magisk). Direct install would be the simplest method
mingkee said:
Moving from 23.0 to 24.1 is straightforward
1. Update app
2. Update boot (Magisk) to 24.1, reboot
3. Enable Zygisk, reboot
4. Enforce Deny List, reboot
5. Install module USNF, reboot
6. Configure Deny List. Don't worry about Play Service because USNF will take care of it. Add any app detected root into it, and reboot every time it's updated
7. Install Fox Module manager and pick module you want
Click to expand...
Click to collapse
this should be pinned somewhere, very simple and worked fine on my Poco F3 using miui.eu & android 11
thanks a lot