Database Develop

[Q] Lots of Questions about everything !

Hello I have lots of questions
1) is there a way to make active display or tap to wake up phone?
2) on my previous phone if I clicked on the volume key button the phone would turn on?- can I do it on here?
3) there are many more apps like contextual services and lots of other Motorola apps. Which are safe to disable?
4) is there a way to block OTA updates?
5) when you swipe down using two fingers you get the notification pull menus. But when I click the wifi button it opens the settings app and goes to wifi. Can't I edit it so it goes DIRECTLYY to. Toggle wifi?
6) pin on lock screen - on my old phones when I input my pin it unlockes. This is so stupid and takes more longer after inputtingmy pin. I then have to click enter? How do I automate that

1) You can use AcDisplay. You can't tap to wake the phone, a custom kernel would be required for that.
2) Not by default.
3) I leave Assist, Alert, Audio effects, Help and Migrate disabled. I don't know about the rest, but those are safe.
4) Just don't install them. I don't know if you can disable the alerts though.
5) Hold the wifi button . Works with other settings as well, try it out.
6) Well, you could try using an app that replaces your lockscreen which has this feature, such as the Home Screen Lock of Smart App Lock. By default you can't though.
Hope I helped.

Krisshp said:
5) when you swipe down using two fingers you get the notification pull menus. But when I click the wifi button it opens the settings app and goes to wifi. Can't I edit it so it goes DIRECTLYY to. Toggle wifi?
Click to expand...
Click to collapse
I assume you are using Lollipop. The wifi-icon and the SSID are two seperate buttons. Tapping the icon switches wifi on/off. Tap on the SSID and it will take you to settings

I've found that long-pressing the wifi button will toggle it on and off.

hippy dave said:
I've found that long-pressing the wifi button will toggle it on and off.
Click to expand...
Click to collapse
Ah. That must be how kitkat behaves

Yep

mpeL said:
1) You can use AcDisplay. You can't tap to wake the phone, a custom kernel would be required for that.
2) Not by default.
3) I leave Assist, Alert, Audio effects, Help and Migrate disabled. I don't know about the rest, but those are safe.
4) Just don't install them. I don't know if you can disable the alerts though.
5) Hold the wifi button . Works with other settings as well, try it out.
6) Well, you could try using an app that replaces your lockscreen which has this feature, such as the Home Screen Lock of Smart App Lock. By default you can't though.
Hope I helped.
Click to expand...
Click to collapse
Thanks for that, didn't know holding the button toggles it!!! Wish it was more simpler!!!
Bit disapointed thaty I cant use the volume keys! thanks for the help

Wake up lock screen when received notification

Can someone assist me.... For some reason am not seeing the option on my device to enable Wake up lock screen when received notification

Open settings, search Wake screen, pick first option

That's the thing, am not seeing the options, even Double Tap on screen to wake up

There is a search field in Settings. The wake screen option is somewhere in Notifications, all the gestures(double tap included) are in Accesibility features.
Use the search feature for other toggles/settings

andrei80 said:
Open settings, search Wake screen, pick first option
Click to expand...
Click to collapse
andrei80 said:
There is a search field in Settings. The wake screen option is somewhere in Notifications, all the gestures(double tap included) are in Accesibility features.
Use the search feature for other toggles/settings
Click to expand...
Click to collapse
Been doing all of that, also please note is the Japanese version, I have also attached a recorded screen

Notification content does not display on the lock screen | HUAWEI Support Global
Learn about 'Notification content does not display on the lock screen'. Find all usage guide, troubleshooting tips and resources for your HUAWEI product.
consumer.huawei.com
Maybe this will help...

Thanks, but am thinking is My device which is Japanese EMUI 9.1 version could be the issue,
Or is either I Factory Reset and reinstall cause not sure if I Block an important option when I was installing for the first time

The menu seems quite different from what I see in my p30 pro emui11...

Okay

Thanks for this, but for some reason am not seeing "More NOTIFICATION" not sure if is because am using EMUI 9.1

It certainly is. No update since new?

I only got the Device over the weekend.... I only did one update, didn't get any after

Is there a way to have flashlight shortcut on the lock screen? Ideally by button press.

Is there a way to have flashlight shortcut on the lock screen? Ideally by button press.
One of the most used function is missing on this phone

Draw a "V" on the screen whilst it's turned off and the flashlight will turn on/off

dnaswitcher said:
Draw a "V" on the screen whilst it's turned off and the flashlight will turn on/off
Click to expand...
Click to collapse
This doesn't work on X5 pro that I have

Did you activate the feature as described on the Oppo-site that appears after you click on my link?
It works on mine after doing so:
Go to [Settings] > [Gesture & Motion] > [Screen-off Gestures] > toggle to enable or disable [Screen-off Gestures].
You can also have more Screen-off Gestures by tapping [Add a Screen-off Gesture].
There are 7 more gestures to choose from.

dnaswitcher said:
Did you activate the feature as described on the Oppo-site that appears after you click on my link?
It works on mine after doing so:
Go to [Settings] > [Gesture & Motion] > [Screen-off Gestures] > toggle to enable or disable [Screen-off Gestures].
You can also have more Screen-off Gestures by tapping [Add a Screen-off Gesture].
There are 7 more gestures to choose from.
Click to expand...
Click to collapse
Working now. Many thanks

Themes / Apps / Mods [App] Fix of buggy proximity sensor - Locking screen from being pressed during phone call

Note: app compatible with any phone with 1080x2400 screen or lower. Probably higher too, try it. Also it's impossible to make such block when talking in messengers (more precisely, it's difficult). App won't work without gapps, rare case.
Instead of classic reliable optical sensor we have sucky ultrasonic one.
Sometimes it does not turn off the screen while phone call and something is pressed with ear or cheek up to dropping call.
Popular workaround is app "Call Proximity Sensor Fix" which automatically turns off the screen. Or you can press the power button immediately after the answer.
But IMHO this is inconvenient because if you need to look at something on the screen it will not turn on by itself which is so familiar.
My simple application makes screen insensitive to taps. And unlike analogs soft buttons and status bar are blocked too (but not gestures).
On screen will be translucent button that disables lock if you need to use the phone:
– Long tap on button - unlock (button will turn green)
– Short tap when unlocked - lock again
– Long tap when unlocked - remove button at all so as not to interfere with e.g. for entering text
When second call comes in screen will automatically unlock so you can easily answer or hang up. Then it blocks again.
When manually launching the application there will be a question whether to enable 4 seconds delay for an outgoing call. So you able to choose SIM card.
Made by powerful Tasker, the project was exported as standalone application via App Factory. Implemented via scenes with new full-screen blocking type.
Location of button adapted for default AOSP / Google Dialer. It can be misplaced for third-party dialers and / or interface scale. It's impossible to cover all possible variants. So if it really bothers you, install Tasker and project below. Then change coordinates of the buttons.
Installation
Follow manual carefully, otherwise nothing will work.
Application is safe and doesn't have internet access.
1. Download APK below this post
2. Install it via file manager and launch
3. Answer the question about delay, decision can be changed later by launching app again
4. Open Settings > Apps & Notifications > In-Call Screen Lock
5. In "Notifications" turn off them all completely, otherwise they will be annoy you
6. In "Permissions" enable everything: Contacts, Call List and Phone
7. MIUI: right there in application settings enable "Autostart"
8. MIUI: and in "Background" select "No restrictions"
9. Custom: Settings > Apps & Notifications > Advanced > Special app access > Battery optimization > All apps > In-Call Screen Lock > Don't optimize
10. Custom: Settings > Apps & Notifications > Advanced > Special app access > Display over other apps > In-Call Screen Lock > Allow display over other apps
11. MIUI: Settings > Privacy > Management > Special app access > Display over other apps > In-Call Screen Lock > Allow display over other apps
12. Settings > [MIUI: Advanced settings] > Accessibility > In-Call Screen Lock > enable "Use In-Call Screen Lock"
If you using Tasker
1. Download ZIP archive below this post
2. Extract file from it to phone/Tasker/projects
3. Tap on "House" icon at the bottom > Import Project > In-Call_Screen_Lock
4. If you don't need a delay on an outgoing call: delete / disable action #3 ("Wait") from the "In-Call Lock Start" task
5. Custom: Settings > Apps & Notifications > Advanced > Special app access > Display over other apps > Tasker > Allow display over other apps
6. MIUI: Settings > Privacy > Management > Special app access > Display over other apps > Tasker > Allow display over other apps
7. Settings > [MIUI: Advanced settings] > Accessibility > Tasker > enable "Use Tasker"
UPD: files updated, fixed small bug.

does this affect battery life

shakeelbirmani said:
does this affect battery life
Click to expand...
Click to collapse
No.

Tested now on my RN10-pro... works just fine! Thank you!

Tested without gapps and it didn't work. I use the standard phone app from Arrow OS. I do all settings from your instruction.
There was no 4 seconds query of the sim card. The and no lock screen button.

Social_Work said:
Tested without gapps and it didn't work.
Click to expand...
Click to collapse
Unfortunately, APK's exported by Tasker always have dependencies from GMS no matter actions it should perform. Sorry, I can't fix that.

I reinstal Arrow with Gapps and Install tasker. IT works great! Thx a lot! Now ist this Phone uesable.

Great application. Tested it via Tasker and works. Thank you so much!
Small question, if you do use the power button while in call to lock the screen and you unlock it again and then use your unlock button, it unlocks but the button disappears so you can't lock it again. How do I get the button back then?

Note: sensors are automatically calibrated and sometimes this creates a problem.
To cleanup and recalibrate the sensors, all you need to do is this:
Bash:
# dd if=/dev/block/by-name/persistbak of=/dev/block/by-name/persist conv=notrunc
For me that solved everything on official MIUI V13.0.12.0 (and previously on V12.5.9.0).

Amazfit User said:
if you do use the power button while in call to lock the screen and you unlock it again and then use your unlock button, it unlocks but the button disappears so you can't lock it again
Click to expand...
Click to collapse
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
Zibri said:
sensors are automatically calibrated and sometimes this creates a problem
Click to expand...
Click to collapse
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.

Bonoboo said:
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.
Click to expand...
Click to collapse
Thanks for the information. Tested it and ticking the block overlay + fixes the issue. I guess it's because even though I'm able to tap the icon and other call icons the phone is still locked. I guess the overlay + makes sure that the lock off scene is still visible on the "lock" screen. I'm on Samsung One UI 4.1 with the native Google dialer.
Thanks for the help.

Bonoboo said:
That's strange. I tested as you wrote and button visible, nothing in profile logic should block its appearing. I used clean Android 11 and AOSP dialer.
As possible workaround please test this: Tasker > tab "Scenes" > Lock On > tap on lock icon > tab "Long tap" > action "Show Scene" > tick "Block Overlay+"
That's legit for classic sensor, but I'm doubt, that ultrasonic store its calibration data there (if even have it). "Sensor" unreliable just by design.
Click to expand...
Click to collapse
ultrasonic sensor can be even manually calibrated and the calibration is indeed stored and used.
Also: the ultrasonic sensor works in software, relying also on the position and angle of the phone.
If that measurement fails or is inaccurate, everything is ruined.
Trust me: try to do a fastboot flash of V13.0.12.0 then reset that partition as I said.
Then you can tell me if it improves or not.
For me now it works perfect both in DUO both in the stock dialer and messenger.

You can find the latest stock firmwares here:
Codes and study of the Redmi Note 10 PRO (SWEET) and some findings
code name 76937 com.miui.powerkeeper.cloudcontrol.CloudUpdateReceiver 8437625 com.miui.powerkeeper.thermalconfig.ThermalConfigReceiver 37263 com.miui.powerkeeper.ui.framerate.FrameRateSecretCodeReceiver 2877...
forum.xda-developers.com

Question Double Tap to screen On/Off

Hi Guys,
Is it possible to enable double tap to turn screen on and off on motorola edge 30 ultra?
Thanks so much !

Single tap only, double tap is omitted due to the in- screen fingerprint sensor, so as soon as u touch the screen, the screen comes alive (which is done in order to make fp-unlocking faster)

blademaner said:
Hi Guys,
Is it possible to enable double tap to turn screen on and off on motorola edge 30 ultra?
Thanks so much !
Click to expand...
Click to collapse
It's available in the setting, I can double tap to turn off the screen. I am using the UK version.

85256638 said:
It's available in the setting, I can double tap to turn off the screen. I am using the UK version.
Click to expand...
Click to collapse
Where is this setting located? I cannot double-tap on blank space to power off.

Double Tap Screen On/Off will help you to minimize the usage of power button.

Maimu9 said:
Double Tap Screen On/Off will help you to minimize the usage of power button.
Click to expand...
Click to collapse
I have been looking for this setting for almost 10mins but I didn't find it anymore, but I'm sure it was there in the older OS version, my screen is still able to be turn on/off with double tap.

85256638 said:
I have been looking for this setting for almost 10mins but I didn't find it anymore, but I'm sure it was there in the older OS version, my screen is still able to be turn on/off with double tap.
Click to expand...
Click to collapse
Here.
Go to Settings > Gesture shortcuts > Jump to lock screen
Toggle on and the phone will ask you whether you double tap to go directly to lockscreen (NOT peek display) or the usual peek display.
Go to Settings > Gesture shortcuts > Put display to sleep
Toggle on to enable.

ijuanp03 said:
Here.
Go to Settings > Gesture shortcuts > Jump to lock screen
Toggle on and the phone will ask you whether you double tap to go directly to lockscreen (NOT peek display) or the usual peek display.
Go to Settings > Gesture shortcuts > Put display to sleep
Toggle on to enable.
Click to expand...
Click to collapse
It's been removed in the latest update. At least for EU devices.

I've the stock X30 Pro version. I can tell you some menu translation is all over the place. The "Jump To the Lock Screen" originally translated as "Double Tap" in the simplified Chinese language.
Under Display-> Peek Display, toggle the switch on and off, the phone will ask you to show fingerprint sensor or not. If you choose No, double tap WILL NOT WORK even if "Jump to lock screen" is on. It's surely a bug or something. Anyway a single tap always wakes up the screen and show "peek display" screen or "fingerprint sensor" icon, depends on what you chose before. Double tap when the screen is off will skip the "peek display" and goes into lock screen. AFAIK there's no true double tap to screen on so far......

AkiraBBQ said:
I've the stock X30 Pro version. I can tell you some menu translation is all over the place. The "Jump To the Lock Screen" originally translated as "Double Tap" in the simplified Chinese language.
Under Display-> Peek Display, toggle the switch on and off, the phone will ask you to show fingerprint sensor or not. If you choose No, double tap WILL NOT WORK even if "Jump to lock screen" is on. It's surely a bug or something. Anyway a single tap always wakes up the screen and show "peek display" screen or "fingerprint sensor" icon, depends on what you chose before. Double tap when the screen is off will skip the "peek display" and goes into lock screen. AFAIK there's no true double tap to screen on so far......
Click to expand...
Click to collapse
Yeah, so the only way to turn on double tap to lockscreen is to enable Peek Display.
The behavior of the phone will be like this-
1. Single tap to peek display AND
2. Double tap to lock screen
It cannot be OR.
Also, once you turned on Jump to Lockscreen, you can NOT turn on "move phone to show peek display"
This is not a bug as the logic behind this is the phone's peek display will ALWAYS turn on once you moved the phone. Hence, impossible to double tap to lockscreen (you CANNOT double tap from peek display to go to the lockscreen).