Hi there everyone, SOLVED/FIXEDThis is my problem. I tried to flash stock firmware from Odin and the cable moved around so the flashing process interrupts by accident.
after that, I tried to boot into download mode and I got this error:
An error has occurred while updating the device software Use the Emergency recovery function in the Smart Switch PC software
My device model is Samsung galaxy note 9 SM-N960F/DS
O tried to force the flashing process from that screen on ODIN but just fail.
Smart Switch does not help just an unsupported device and is asking for an Emergency recovery code
I will appreciate any help to fix my phone
thanks!
FIXED /SOLVED :
-Download mode wasn't enable. I flashed the firmware from the screen error.
Just make sure don't mess with the cable, the flashing process will be the same as download mode.
Make sure to flash the stock firmware from you device.
You can download stock firmware from SamMobile, it will take a while if you don't have a membership
If the flashing process fail on Odin. Download another Odin version. That's what I did.
Good luck!!-
I'm glad it's fixed now. Do share how you did it though, just to help others with similar issues!
oddbehreif said:
I'm glad it's fixed now. Do share how you did it though, just to help others with similar issues!
Click to expand...
Click to collapse
he rebooted the phone back to dl mode and flashed the firmware again using odin without moving the cable.
bober10113 said:
he rebooted the phone back to dl mode and flashed the firmware again using odin without moving the cable.
Click to expand...
Click to collapse
Download mode wasn't enable. I flashed the firmware from the screen error.
Just make sure don't mess with the cable, the flashing process will be the same as download mode.
Make sure to flash the stock firmware from you device.
You can download stock firmware from SamMobile, it will take a while if you don't have a membership
If the flashing process fail on Odin. Download another Odin version. That's what I did.
Good luck!!
You are still able to download from the Emergency screen.
Sent from my SM-N960U using Tapatalk
butchieboy said:
You are still able to download from the Emergency screen.
Click to expand...
Click to collapse
Yes, still able to do the download process from that screen as the regular download mode.
Related
Here's a solution that worked for me
Flash the below with ODIN (thanks to bonzai3558), extract the .md5 file from the zip, and in odin choose PDA and point to that file, keep everything else blank/default. Connect Tab with USB (after it is in download mode by power on +Volume down then volume up, so it shows the yellow android with shovel) then hit Start.
this ODIN version: http://www.megaupload.com/?d=DDN6BYB2
and this pda md5: http://www.mediafire.com/?gcenefqc3khcc0c
Now when you check for OTA once your back up, itll work fine and get past 13% and go all the way (it is normal for it to stay a long time on 76%)
Best of all tablet is ROOTED
so this odin file is surely stock (and plays nice with the OTA update)
-PS: This odin file also will save your device if it is bricked or frozen (boot into download mode) power button + volume down button, then press volume up to select
*thanks pershoot for help as well
Work in the v model ?
Thanks
this version of odin isn't seeing my tab. I have the samsung drivers installed. :/ But it still says unknown device when I go into fastboot mode and odin doesn't see it
edit: not sure what it is, my gigabyte mother board seems to hate samsung android devices. Worked like a champ with my wife's laptop. Thanks!
Does this work with retail 10.1?
should
10 char
SS2006, you are awesome! Thanks for posting this. I flashed recovery.img, flashed boot.img, and restored all the original apps from the system dump, but I was still stuck at 13%.
Was totally WTF...?
Then saw this thread. FLashed the zip file, and BOOM. Software update success!
Pershoot is the man!
Anyone tried this on the v model?
Does this work on retail 10.1 tab
Can we odin back to stock with this image if we have the retail tab? Can we replace the retail bootloader with the I/O bootloader?
SS2006 said:
should
10 char
Click to expand...
Click to collapse
doesn't work on retail with that ver. of odin (and trying to flash in a tar'fyed cwm).
either it too is locked, or there is another means of interacting with it.
ill kep my eyes peeled for retail.
So I did this to a retail locked 16gb. I get force close messages like crazy now. Any idea on how to get back to stock?
I tried this after an adb reboot,,, sent me into a boot loop and it did not clear it up so i did it the old fashoin way, hopefully can get it to work later would def help!
SS2006 said:
this ODIN version: http://www.megaupload.com/?d=DDN6BYB2
and this pda md5: http://www.mediafire.com/?gcenefqc3khcc0c
...
-PS: This odin file also will save your device if it is bricked or frozen (boot into download mode) power button + volume down button, then press volume up to select
Click to expand...
Click to collapse
This saved my LE I/O SGT! Was stuck in boot loop; couldn't connect with adb or fastboot, but could get into ODIN download mode. After flashing a couple other versions that either didn't work or had other issues (no USB, accelerometer, etc), I finally found this thread. Flashed this PDA and now I'm back up and running!
However, I had already messed up my bootloader. I flashed it with this version: http://forum.xda-developers.com/showthread.php?t=1083517 which is from the 10.1v retail edition. Now when I try to do the 3.1 OTA update, it won't boot into update mode. It fails and says to try doing the update with Kies. Do you have a bootloader that I can flash with ODIN for this same PDA version?
It did same for me, when i tried to do OTA update, it says failed to update and try to update with kies. I ended up factory resetting the device. Its still rooted and now I am trying to update again. Hopefully it works this time. For some reasons I can't launch any apps. They are all crashing. Any ideas what might be wrong?
media_11 said:
It did same for me, when i tried to do OTA update, it says failed to update and try to update with kies. I ended up factory resetting the device. Its still rooted and now I am trying to update again. Hopefully it works this time. For some reasons I can't launch any apps. They are all crashing. Any ideas what might be wrong?
Click to expand...
Click to collapse
Any luck? I haven't had the app crashing problem, but it seems pretty common from reading around the forums.
I was able to install Kies and get it to recognize my tab (had to disable USB debugging first), however, it gives me the following message: "This version of the device cannot be updated." So, it seems I am still unable to get the HC 3.1 update... Anyone have a solution? I still think the original ODIN flashable bootloader from the same PDA as the OP might do the trick for OTA updates... Just not sure where to find it.
FWIW: Kies reports my current firmware version as: PDA:KE3 / CSC:KE3 (XAR)
It doesn't work for me either. I get the same error and when I tried to do OTA update, it reboots after the download saying it couldn't be updated. I think we need PDA with 3.1.
I haven't been able to use anything on my tablet. every app running in the background crashes and theres. I did system reset and factory reset but no luck.
Any help would be really appreciated.
media_11 said:
It doesn't work for me either. I get the same error and when I tried to do OTA update, it reboots after the download saying it couldn't be updated. I think we need PDA with 3.1.
I haven't been able to use anything on my tablet. every app running in the background crashes and theres. I did system reset and factory reset but no luck.
Any help would be really appreciated.
Click to expand...
Click to collapse
Have you tried pershoot's 3.1 update yet? http://droidbasement.com/db-blog/?p=2075
SS2006 said:
Here's a solution that worked for me
Click to expand...
Click to collapse
SS2006, you are a god send! I was in a boot-loop somehow on my Android 3.1 10.1v after trying out the http://forum.xda-developers.com/showthread.php?t=1130574 thread..
Flashed with this ODIN package (that is Android 3.01) and did the successful upgrade back to 3.1! Sweet!
So does anyone have more details on these ODIN packages and how they are setup?
odin is crashing es soon as i open it, anybody having the same problem?
update: nevermind, im using odin 1.82 and now im rooting my tab.
hey i got a stupid question:
i got tab 10.1 P7500 already on 3.1 HC
can i just flash the root exploit? using stock recovery?
just wanna make sure before i did something stupidly irreversible.
EDIT:
for those of you on locked 3.1 P7500 (indonesian edition) you can just skip the Odin flashing and directly place the root exploit to your root sd and then apply the update (just tried it and it works) i have root now.. moving on to CWM
drago009 said:
odin is crashing es soon as i open it, anybody having the same problem?
update: nevermind, im using odin 1.82 and now im rooting my tab.
Click to expand...
Click to collapse
mine is doing the same thing is it because im using ODIN3 1.85 do I need to use 1.82??
I dont understand I got PDA_SIGNED_HRI83_BUKDF.tar.md5 to work once but now its not and PDA_SIGNED_P7105.tar.md5 never works by the way which one is the retail one anyone know??
Hi,
My Note5 N920C is currently softbricked. It occurred during the rooting process, where Odin crashed as i was flashing a kernel and rendered my phone virtually useless. When the phone turns on, it goes immediately to a blue screen with a message telling me to use the "Emergency Recovery feature on Smart Switch." Smart Switch when ran on my PC would not recognise the phone, so that option is out of the question.
The phone from this screen can be put into the TWRP recovery mode too, but as the Note5 has no MicroSD slot, this is not that useful. It can also enter download mode, which is where i think the solution could lie. Would i be able to flash onto the phone using Odin and the download mode, or would that not work/make things worse?
Any ideas welcome,
Cheers,
James
Jameswebb97 said:
Hi,
My Note5 N920C is currently softbricked. It occurred during the rooting process, where Odin crashed as i was flashing a kernel and rendered my phone virtually useless. When the phone turns on, it goes immediately to a blue screen with a message telling me to use the "Emergency Recovery feature on Smart Switch." Smart Switch when ran on my PC would not recognise the phone, so that option is out of the question.
The phone from this screen can be put into the TWRP recovery mode too, but as the Note5 has no MicroSD slot, this is not that useful. It can also enter download mode, which is where i think the solution could lie. Would i be able to flash onto the phone using Odin and the download mode, or would that not work/make things worse?
Any ideas welcome,
Cheers,
James
Click to expand...
Click to collapse
Enter Download mode and flash your official variant firmware. Since this is result of an Odin crash it MUST be a full official firmware so you can be sure all your partitions are correctly flashed, bl,sbl,cp, etc...
Sent from my SM-N930F using Tapatalk
Rx8Driver said:
Enter Download mode and flash your official variant firmware. Since this is result of an Odin crash it MUST be a full official firmware so you can be sure all your partitions are correctly flashed, bl,sbl,cp, etc...
Click to expand...
Click to collapse
Thanks a lot, this worked out all fine. Reflashed the stock Rom and booted up all fine.
Jameswebb97 said:
Thanks a lot, this worked out all fine. Reflashed the stock Rom and booted up all fine.
Click to expand...
Click to collapse
That's great news! If you want to root again i recommend flashing supersu in odin (to allow boot of Twrp) then Twrp in Odin, Reboot Twrp then BACKUP, then do your wipes and flash Rom of choice (please already have downloaded it to internal storage! Lol) according to the rom devs Instructions...
Sent from my SM-N930F using Tapatalk
So i flashed stock rom to unroot phone and then i updated to nougat, forgetting this, i foolishly flashed arter97 kernel while 7.0 was on my phone and now it wont boot. Im not sure what to do since i tried flashing the stock rom again and ODIN wont let me
and my phone displays sw rev check fail device 4 binary 2. Im pretty much lost and im not sure what to do anymore.:crying:
jfca94 said:
So i flashed stock rom to unroot phone and then i updated to nougat, forgetting this, i foolishly flashed arter97 kernel while 7.0 was on my phone and now it wont boot. Im not sure what to do since i tried flashing the stock rom again and ODIN wont let me
and my phone displays sw rev check fail device 4 binary 2. Im pretty much lost and im not sure what to do anymore.:crying:
Click to expand...
Click to collapse
Use smartswitch on pc, put ur phone in download mode and connect it to pc.
billowusu47 said:
Use smartswitch on pc, put ur phone in download mode and connect it to pc.
Click to expand...
Click to collapse
I was actually doing this but i messed up because instead of download mode i was using recovery mode, i thought it was asking for recovery mode in another way lol.
Thanks
Hello ,
I have Korean version N950N. I flashed twrp and then i rooted to phone. Today i decided to flash stock rom with Odin. When i started the flash approx %80 odin was stop and i wait more than 1 hour then i pulled out the cable. Now phone give some error (its Korean language ) and i can access to download mode. I tried with 2 different rom but after %80 odin stop again. Now i can not use my phone even i can not turn off always giving error. How can i solve this problem? Please help me. Thank you.
bahadir70 said:
Hello ,
I have Korean version N950N. I flashed twrp and then i rooted to phone. Today i decided to flash stock rom with Odin. When i started the flash approx %80 odin was stop and i wait more than 1 hour then i pulled out the cable. Now phone give some error (its Korean language ) and i can access to download mode. I tried with 2 different rom but after %80 odin stop again. Now i can not use my phone even i can not turn off always giving error. How can i solve this problem? Please help me. Thank you.
Click to expand...
Click to collapse
Have you tried the smart switch emergency recovery option?
BluePhnx said:
Have you tried the smart switch emergency recovery option?
Click to expand...
Click to collapse
When i connected to smart switch its also said this phone not supported...
Can you go in to recovery mode and factory reset?
bahadir70 said:
When i connected to smart switch its also said this phone not supported...
Click to expand...
Click to collapse
Can you flash TWRP and get into recovery to wipe system or flash a custom Rom?
BluePhnx said:
Have you tried the smart switch emergency recovery option?
Click to expand...
Click to collapse
android-incredible said:
Can you go in to recovery mode and factory reset?
Click to expand...
Click to collapse
I can not most probably , also now battery is off and i forget my cable at office Tomorrow i will try one more time. But o with phone i can access only download mode, with smart switch giving error as well.
Well ,i solved the problem. I downloaded last version of stock rom and i changed odin as well. Now phone is working. For the S-health i downloaded old version and after that i updated with play store then S-health working properly.
bahadir70 said:
Well ,i solved the problem. I downloaded last version of stock rom and i changed odin as well. Now phone is working. For the S-health i downloaded old version and after that i updated with play store then S-health working properly.
Click to expand...
Click to collapse
Good to hear . Now leave it alone
Sent from my SM-N950U using Tapatalk
android-incredible said:
Can you go in to recovery mode and factory reset?
Click to expand...
Click to collapse
I Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
My model number is SM-950F , basically stuck on download mode
No luck turning the phone on recovery mode only can use download mode and i have tried the same files with the Nand erase all, the same thing .. Odin installs all the files without any errors but does not boot up after installation is finished.
The service shop said they checked components on the motherboard and there is no damage or no IC has been damaged.
What do you suggest i do next?
G'day XDA Developers
I tried rooting my phone with Magisk then flashing the AP file via Odin in download mode then flashed twrp how ever when I boot I get the error message. Your phone isn't running official software and the phone just keeps rebooting so I think I have tripped Knox.
I can't seem to enter download mode or recovery so I am wondering how can I restore it back to stock rom and relock the bootloader? Or is my only option to RMA the phone?.
Yes by rooting your device you are actually tripping your KNOW built in fuse.
Now try to do few thing:
Download the stock firmware by using Frija-v1.4.2 software.
After that unzip the firmware file and use odin3 to flash the firmware you can read more here.
If you need TWRP use this link to install it.
after that use this link to install kernal which is having magisk inside it so you dont even need button combination.
you just need to flash kernal zip file in twrp or you can read official post here.
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
OzGreatAndTerrible said:
The problem is I can't enter download mode the phone just keeps endlessly rebooting so I might have to wait until the battery runs out then try entering download mode.
Update: Okay so I waited until the phones battery died and the phone ended its reboot loop then I charged the phone and tried entering download mode and I was successful in that then I reflashed the stock rom via odin and restored the phone back to factory settings now it's working again.
Click to expand...
Click to collapse
I have the same thing bruh.
OMFG, I have the same problem! I made everything as you said, but... When I plug my cable in S10e it continues rebooting... What I should do????