Database Develop

Stuck at initialization step with Odin3 v3.12 with FRP lock on SM-N920L

I'm having the the problem after try to flash (N920LKLU2DQC7_N920LLUC2DQC7_N920LKLU2DQC4_HOME.ta r). Odin3 v3.12 stuck at initialization step as image attached. Also try with Odin3 v3.07 and Odin3 v3.10.6 with the same problem. Maybe because FRP lock in ON status or anything else? Need help ASAP
Screen info on Download Mode
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920L
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enable
KNOX WARRANTY VOID: 0 (0х0000)
RP SWREV: B:2 K:0 S:0

Try again after enabling 'OEM Unlock' in the Developer Options. By doing so FRP lock will be off.
And what exactly are you trying to do...?

Shiv Parmar said:
Try again after enabling 'OEM Unlock' in the Developer Options. By doing so FRP lock will be off.
And what exactly are you trying to do...?
Click to expand...
Click to collapse
Actually, this is phone come from stock official rom, which is received OTA update from samsung then try to download the updates but it's stuck during updating. Now this phone, can boot into download mode only.
I can't boot into system anymore and turn the on the OEM unlock function in developer mode.
Is there solution to resolve this. TIA

Im just guessing; since the OP doesn't flash a custom stuff like twrp recovery, OEM unlocking is not necessary. And the knox is hasn't tripped yet as i see. I would try another usb port, different version of odin(run as administrator) and be sure usb drivers are correctly installed on the PC. If all is OK; just try flashing the fw version which came installed on the device. If it success, enable oem unlock then try flashing latest fw and keep the OEM unlock enabled for future plans like rooting etc.
Mi MIX
7.5.4 Épic

Konsstantine34 said:
Im just guessing; since the OP doesn't flash a custom stuff like twrp recovery, OEM unlocking is not necessary. And the knox is hasn't tripped yet as i see. I would try another usb port, different version of odin(run as administrator) and be sure usb drivers are correctly installed on the PC. If all is OK; just try flashing the fw version which came installed on the device. If it success, enable oem unlock then try flashing latest fw and keep the OEM unlock enabled for future plans like rooting etc.
Mi MIX
7.5.4 Épic
Click to expand...
Click to collapse
FYI, I already try to flash with different Odin like v3.12, v3.07 and v3.10.6 but still same stuck at initialization step but I'm not flash the fw which is came at first because I dont know what the previous fw. The fw that I try to flash is original samsung fw from sammobile which is the latest ones (Nougat 7.0), actually this device is not mine, its my friend device that need my help to resolve it.
Maybe this device is from 5.0 and received OTA update for 6.0, maybe I should try to flash with 5.0 version first the try 6.0 later. Anyway thanks for advice @Konsstantine34
Do refer attachment, which version should I flash it?

antuketot76 said:
FYI, I already try to flash with different Odin like v3.12, v3.07 and v3.10.6 but still same stuck at initialization step but I'm not flash the fw which is came at first because I dont know what the previous fw. The fw that I try to flash is original samsung fw from sammobile which is the latest ones (Nougat 7.0), actually this device is not mine, its my friend device that need my help to resolve it.
Maybe this device is from 5.0 and received OTA update for 6.0, maybe I should try to flash with 5.0 version first the try 6.0 later. Anyway thanks for advice @Konsstantine34
Do refer attachment, which version should I flash it?
Click to expand...
Click to collapse
Upgrading from X to latest fw; shouldn't be a problem, downgrade could. In my opinion it's about the usb port/cable. Try different ones of them. Side note: If odin fails/freezes once; you have to reboot into download mode again to start a new session.
Also can you please post the screenshot of Options tab in Odin? Perhaps partition stuff or others are checked which supposed to be not.

Konsstantine34 said:
Upgrading from X to latest fw; shouldn't be a problem, downgrade could. In my opinion it's about the usb port/cable. Try different ones of them. Side note: If odin fails/freezes once; you have to reboot into download mode again to start a new session.
Also can you please post the screenshot of Options tab in Odin? Perhaps partition stuff or others are checked which supposed to be not.
Click to expand...
Click to collapse
See the screenshot attached for option tab, its stuck at initialization inside log

antuketot76 said:
See the screenshot attached for option tab, its stuck at initialization inside log
Click to expand...
Click to collapse
Well, i have no idea more than that. Perhaps another pc or Kies way(never used). What's the P7500 though?

Konsstantine34 said:
Well, i have no idea more than that. Perhaps another pc or Kies way(never used). What's the P7500 though?
Click to expand...
Click to collapse
opps, wrong photo. P7500 is for my galaxy tab 10.1... actually now Im flash a galaxy tab.
Its should be N920LKLU2DQC7_N920LLUC2DQC7_N920LKLU2DQC4_HOME.tar.md5

Guys, really need your help on this problem, do you have any ideas on this.
Sorry for disturbing you guys, so sorry.
 @CodeNameRedNeck
 @LiL_Assassin
 @Art Vanderlay

antuketot76 said:
Guys, really need your help on this problem, do you have any ideas on this.
Sorry for disturbing you guys, so sorry.
@CodeNameRedNeck
@LiL_Assassin
@Art Vanderlay
Click to expand...
Click to collapse
If Odin is seeing the phone in download mode my guess would be that your drivers are fine (I could be wrong) so I can't help but wonder why it sticks on initialization. I flash firmware on my device with FRP on all the time. I can only suggest using smart switch. When you connect your phone with smart switch running it will tell you that your device is not supported. It will still work. You will need the serial number and you must use capital letters and the dash in the model number.

CodeNameRedNeck said:
If Odin is seeing the phone in download mode my guess would be that your drivers are fine (I could be wrong) so I can't help but wonder why it sticks on initialization. I flash firmware on my device with FRP on all the time. I can only suggest using smart switch. When you connect your phone with smart switch running it will tell you that your device is not supported. It will still work. You will need the serial number and you must use capital letters and the dash in the model number.
Click to expand...
Click to collapse
Im try with Samsung Kies but not try yet with Smart Switch.
Maybe I can try it with Smart Switch, look if this successful.
Anyway thanks

Try to download latest stock firmware update N920CXXU3CQE1 from samupdate or Samsung mobile and install it via odin that should work .....

mala96 said:
Try to download latest stock firmware update N920CXXU3CQE1 from samupdate or Samsung mobile and install it via odin that should work .....
Click to expand...
Click to collapse
As u mention above is fw for model N920C not same as model inside this thread.
Refer photo attached, my model is N920L korean version LG U+

antuketot76 said:
As u mention above is fw for model N920C not same as model inside this thread.
Refer photo attached, my model is N920L korean version LG U+
Click to expand...
Click to collapse
But did you tried to download the latest version N920LKLU2DQE1 and install it .....

antuketot76 said:
As u mention above is fw for model N920C not same as model inside this thread.
Refer photo attached, my model is N920L korean version LG U+
Click to expand...
Click to collapse
If you have adb installed on your pc you don't even need odin.. Just go into recovery mode and select flash from adb then open a command prompt and (first make sure your firmware is in the SAME exact folder as adb is) then type adb sideload firmwarename.md5
Try that.

mala96 said:
But did you tried to download the latest version N920LKLU2DQE1 and install it .....
Click to expand...
Click to collapse
Yes, I already try flash both latest fw as below but failed.
7.0 version - N920LKLU2DQC7_N920LLUC2DQC7_N920LKLU2DQC4_HOME.tar.md5
GALAXY Note 5 SM-N920L 15.01.2017 6.0.1 Korea (LG Uplus) (LUC) N920LKLU2CPL5
--------------------------------------------------------------------------------------------------------------------
6.0.1 version - N920LKLU2CPL5_N920LLUC2CPL5_N920LKLU2CPL5_HOME.tar.md5
GALAXY Note 5 SM-N920L 15.01.2017 6.0.1 Korea (LG Uplus) (LUC) N920LKLU2CPL5
As I mention below that this device only can boot into Download Mode only, can't boot into system or recovery screen at all even use the combination button.

MrMike2182 said:
If you have adb installed on your pc you don't even need odin.. Just go into recovery mode and select flash from adb then open a command prompt and (first make sure your firmware is in the SAME exact folder as adb is) then type adb sideload firmwarename.md5
Try that.
Click to expand...
Click to collapse
Fyi, this device can boot into download mode ONLY even I try several times with button combination.
My pc already have ADB install on it. Is it using adb method gonna work in download mode or just in recovery mode only? I also dont know what fw is it in this device due to I can view download mode only.

antuketot76 said:
Fyi, this device can boot into download mode ONLY even I try several times with button combination.
My pc already have ADB install on it. Is it using adb method gonna work in download mode or just in recovery mode only?
Click to expand...
Click to collapse
Sorry adb sideload only works in recovery.. Try using my version of odin.. Sometimes odin will freeze and say Not Responding when it's first checking the MD5 file but if you leave it alone for 5 minutes I'll respond again.. Don't connect the phone until after odin finishes checking the md5 file..
My odin version is here you just need to unzip it..
odin-here

MrMike2182 said:
Sorry adb sideload only works in recovery.. Try using my version of odin.. Sometimes odin will freeze and say Not Responding when it's first checking the MD5 file but if you leave it alone for 5 minutes I'll respond again.. Don't connect the phone until after odin finishes checking the md5 file..
My odin version is here you just need to unzip it..
odin-here
Click to expand...
Click to collapse
Thanks for your advice, will try it now and will let u know after this...

PLEASE HELP Note8 hang the logo

PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start

I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts

m4gicvn said:
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
Click to expand...
Click to collapse
For the TWRP error, are you wiping data (where you have to type yes) first? If you do not do that TWRP won't work. There is also newer versions of TWRP available.

Logel said:
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful

Logel said:
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
m4gicvn said:
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Click to expand...
Click to collapse
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware here (same firmware for n950fd and n950f) - use samfirm program for faster download (only latest ver).

bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware .
Click to expand...
Click to collapse
Very thank you
I downloaded the android version 8, I successfully flashed. But this time it was like the beginning. the phone is moving, into the upgrade and error, android child back
Then the phone automatically enters recovery mode
I implemented the wipe cache and wipe data but could not change the result

bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware
Click to expand...
Click to collapse
How to oem unlock the device?

To oem unlock (like all the new samsung devices) you must enable it in the developer options in settings.
As your phone would not boot oem unlock is not available. you must first ensure the phone can boot to stock firmware

Stucked on Samsung Galaxy Note9 screen

Hi,
After trying to update to pie (the OTA update never arrived), it says there was error during the process. Reseted it to try factory recovery but got stucket on "Samsung Galaxy Note9 Screen".
It restarts with power + volume down but does not allow to enter recovery mode or anything else. Tried also with Smart switch, but the phone is not recognized.
Do you have any idea about how to Factory Reset it?
Thanks in advance for any tip you may provide

What is your phone model and country of origin?

Note 9 bought in Mexico with Android OREO and tried to flash via Odin the following version
Samsung Firmware info
Version Date: 2019-06-10
Android Version: 9
PDA
CSC
N9600ZHS2CSE1
N9600OWE2CSE1
(Argentina ANC)

Could enter into Downloading mode, but still odin returns error with hidden.img
Followed various tutorials to delete hidden from inside AP file after extracting it, but the file does not exist as in the tutorials.
Will keep you posted about any update.
Best

kinquela said:
Note 9 bought in Mexico with Android OREO and tried to flash via Odin the following version
Samsung Firmware info
Version Date: 2019-06-10
Android Version: 9
PDA
CSC
N9600ZHS2CSE1
N9600OWE2CSE1
(Argentina ANC)
Click to expand...
Click to collapse
Still you have not mentioned the varient. SM-N960N or SM-960F/DS or SM-N960U or SM-N960U1 or SM-N960W
after downloading appropriate firmware from Sammobile , open odin and put all 4 files in it, Tick bootloader option, auto reboot and nand erase all option in odin. then flash it.

How to go to download mode no OS

So I have no OS installed and right now I'm in TWRP how can I go into download mode without a OS. Is there a way without turning off my phone because it says there is no OS when in the reboot options in TWRP.
I went to sammobile the model I have is the
SM-N960F/DS and I don't know which firmware I should download?

R77 said:
So I have no OS installed and right now I'm in TWRP how can I go into download mode without a OS. Is there a way without turning off my phone because it says there is no OS when in the reboot options in TWRP.
I went to sammobile the model I have is the
SM-N960F/DS and I don't know which firmware I should download?
Click to expand...
Click to collapse
Just choose in TWRP to go into download mode.... if it promotes the (No OS) thing... just skip it and it will reboot to download mode either way

Da-BOSS said:
Just choose in TWRP to go into download mode.... if it promotes the (No OS) thing... just skip it and it will reboot to download mode either way
Click to expand...
Click to collapse
But which firmware should I download from Sam mobile or from samfrew?

R77 said:
But which firmware should I download from Sam mobile or from samfrew?
Click to expand...
Click to collapse
Any latest firmware build of your region and if even isn't the latest.. Your firmware will automatically notify you for new update..

Da-BOSS said:
Any latest firmware build of your region and if even isn't the latest.. Your firmware will automatically notify you for new update..
Click to expand...
Click to collapse
Well I only know the model number but I don't know which region I should pick I didn't get a photo or did a check on my phone?

Stock Firmware Problem

I recently got SM-N960N note 9 it has SKC carrier firmware. It is unlocked already. I wanted to flash Non-carrier firmware pda: N960NKSU3CSJ1 csc: N960NOKR3CSJ1 .
Download mode:
SM-N960N
Current binary : samsung official
Oem lock: OFF
FRP lock : OFF
KG State : checking
warranty void 0x1
.
.
Here is the problem: After i flash that firmware, ODIN says pass (finished 1min28secs) then reset and phone restarts. But it is constantly waiting at "Installing system update" stuck here for too long time it is just stuck never continue. What should i do ? Also what is unlocked phone means ?

xx98burak98xx said:
I recently got SM-N960N note 9 it has SKC carrier firmware. It is unlocked already. I wanted to flash Non-carrier firmware pda: N960NKSU3CSJ1 csc: N960NOKR3CSJ1 .
Download mode:
SM-N960N
Current binary : samsung official
Oem lock: OFF
FRP lock : OFF
KG State : checking
warranty void 0x1
.
.
Here is the problem: After i flash that firmware, ODIN says pass (finished 1min28secs) then reset and phone restarts. But it is constantly waiting at "Installing system update" stuck here for too long time it is just stuck never continue. What should i do ? Also what is unlocked phone means ?
Click to expand...
Click to collapse
Since your download mode shows FRP OFF & OEM LOCK OFF nothing to worry it's fully unlocked.
It just looks to me that some partitions might got corrupted during flashing process.
I suggest you flash twrp recovery first via odin
Then boot into twrp recovery manually
go to wipe section in twrp and format data.
Then reboot twrp recovery again and go to wipe and wipe dalvic cache+data+system+cache+internal storage
Your all partitions are clean now and decrypted.
Then flash stock firmware again
Reboot phone and be patient for few minutes.
Hopefully this should work without issues.

Trex888 said:
Since your download mode shows FRP OFF & OEM LOCK OFF nothing to worry it's fully unlocked.
It just looks to me that some partitions might got corrupted during flashing process.
I suggest you flash twrp recovery first via odin
Then boot into twrp recovery manually
go to wipe section in twrp and format data.
Then reboot twrp recovery again and go to wipe and wipe dalvic cache+data+system+cache+internal storage
Your all partitions are clean now and decrypted.
Then flash stock firmware again
Reboot phone and be patient for few minutes.
Hopefully this should work without issues.
Click to expand...
Click to collapse
I flashed TWRP and it is stuck too
TWRP screen is just waiting constantly now. Seems I cant go recovery... I think maybe firmware was broken.
Model: SM-N960N
Version: N960NKSU3CSJ1/N960NOKR3CSJ1/N960NKOU3CSJ1/N960NKSU3CSJ1
OS: Pie(Android 9)
Filename: SM-N960N_1_20191014163901_mqqoydk22i_fac.zip.enc4
Size: 4298148096 bytes
LogicValue: h7d2bh2hwlojzdq8
i am downlading this. I could not find any link of this build. Have anyone has link for that firmware ?

Why i cant flash stock n960f firmwares ? it has same hardware... anyway to flash stock n960f to n960n ?
okay i flash that firmware and it is again CARRIER VERSION ... When booting i dont want to see SKC telecom and i dont want my phone has carrier functions such as T1Phone etc. What should i do ?

I flashed
PDA N960NKSU3CSG3
CSC N960NOKR3CSG3
firmware. I got "installing system update" stuck again... What the heck ?

Also i say flashes takes 1min28secs. It is too less to me i think. AP file at least 3600mb and i connected usb 2.0 port to odin. 3600mb/88secs=40.9mb/s , is this normal ?

Okay now i understand whats happening. I flash too many roms. I tried dm verity twrp or other version of PIE's . Every flashing rom nothing change my current rom. Odin says PASS no error but its still same. No change. What is happening someone help please ??

xx98burak98xx said:
Okay now i understand whats happening. I flash too many roms. I tried dm verity twrp or other version of PIE's . Every flashing rom nothing change my current rom. Odin says PASS no error but its still same. No change. What is happening someone help please ??
Click to expand...
Click to collapse
I also have the n960n, tried to flash it to a non carrier and failed every time. I tried using the KOO version, I think that's the non carrier Korean version that didn't work.
I was told from few XDA forum's members that is not possible to flash an n960n to a n960f with official firmware unless you use custom firmware.

trannote9 said:
I also have the n960n, tried to flash it to a non carrier and failed every time. I tried using the KOO version, I think that's the non carrier Korean version that didn't work.
I was told from few XDA forum's members that is not possible to flash an n960n to a n960f with official firmware unless you use custom firmware.
Click to expand...
Click to collapse
You have exact same problem with me comrade! I cant change my carrier flash. Everytime it is opening with SK telecom and i am very tired of this ****. That's my fifth day of effort. But still i cant change carrier flash with i found KOO firmwares. So i decided to flash modified stock rom from alenxdre(?) devb 6.0
1) Be sure KG state is checking
2) Flash TWRP via ODIN
3) format data (be careful) and reboot to recovery again
4) wipe all partitions except extsdcard and usb otg
5) Download DM-verity file and flash it with ur extsdcard in TWRP install option. (I dont know why i did this but it worked atleast so i dont know its necessary or not...)
6) Flash Devb 6.0 modified stock rom for n960n
7) Flash magisk root zip file
8) Wıpe factory data if it is required
9) If it is works (at least worked for me) you wont see boot animation of carrier(finally!)
10) But it is still says YOU ARE SKC service provider (What da heck man ??)
After this you have functionable TWRP and MagısK root so you can do anything you want. Go play store and download Phone INFO *SAM* program. That program needs root and it has tool "CSC CHANGER (ROOT)". Since we have only 4 option: SKC, KTC, LUC, and finally KOO !! , Opening tool will redirect you to rom's preconfig CSC change menu and you can select KOO from there. I selected it. Rebooted. TWRP did some update to system and HOLA! My phone is KOO after these all instructions. Good to go. Or not ? Phone info program still says your phone's ORIGINAL FIRMWARE SERVICE PROVIDER IS SKC!!?? Yes we change it to KOO but truth is i could not find any KOO firmware even i flashed modified stock firmware...
Yes i succeeded with this way but thats modified stock rom. It has same appearence with stock rom and good for me. No problem imo. But the real problem: WHY ALL FIRMWARES SAYS SKC? I tried at least 10 different same firmware pda csc cp or different with same modem number, i could not succeeded...
SOMEONE SHOULD HELP US!

xx98burak98xx said:
You have exact same problem with me comrade! I cant change my carrier flash. Everytime it is opening with SK telecom and i am very tired of this ****. That's my fifth day of effort. But still i cant change carrier flash with i found KOO firmwares. So i decided to flash modified stock rom from alenxdre(?) devb 6.0
1) Be sure KG state is checking
2) Flash TWRP via ODIN
3) format data (be careful) and reboot to recovery again
4) wipe all partitions except extsdcard and usb otg
5) Download DM-verity file and flash it with ur extsdcard in TWRP install option. (I dont know why i did this but it worked atleast so i dont know its necessary or not...)
6) Flash Devb 6.0 modified stock rom for n960n
7) Flash magisk root zip file
8) Wıpe factory data if it is required
9) If it is works (at least worked for me) you wont see boot animation of carrier(finally!)
10) But it is still says YOU ARE SKC service provider (What da heck man ??)
After this you have functionable TWRP and MagısK root so you can do anything you want. Go play store and download Phone INFO *SAM* program. That program needs root and it has tool "CSC CHANGER (ROOT)". Since we have only 4 option: SKC, KTC, LUC, and finally KOO !! , Opening tool will redirect you to rom's preconfig CSC change menu and you can select KOO from there. I selected it. Rebooted. TWRP did some update to system and HOLA! My phone is KOO after these all instructions. Good to go. Or not ? Phone info program still says your phone's ORIGINAL FIRMWARE SERVICE PROVIDER IS SKC!!?? Yes we change it to KOO but truth is i could not find any KOO firmware even i flashed modified stock firmware...
Yes i succeeded with this way but thats modified stock rom. It has same appearence with stock rom and good for me. No problem imo. But the real problem: WHY ALL FIRMWARES SAYS SKC? I tried at least 10 different same firmware pda csc cp or different with same modem number, i could not succeeded...
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US![/QUOTE]
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?

trannote9 said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?[/QUOTE]
Modified stock rom has no carrier apps u can guess

trannote9 said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?[/QUOTE]
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version

xx98burak98xx said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
Click to expand...
Click to collapse
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version[/QUOTE]
Are you installing the Stock Samsung N960N OS? If you are make sure that you have all the correct files including the correct USM file loaded before you start the process.

iceepyon said:
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version
Click to expand...
Click to collapse
Are you installing the Stock Samsung N960N OS? If you are make sure that you have all the correct files including the correct USM file loaded before you start the process.[/QUOTE]
what is USM file ? Yea i tried n960n stock firmwares but i solved the problem and boot animation has been gone. i told what did i do in last posts