Database Develop

Note 5 Odin fail SW REV

Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help

Na7anael said:
Hey guys I have a Note 5 N9200 and I get this error: "SW REV CHECK FAIL DEVICE 2 BINARY 1" in Download Mode after I tried to flash a new firmware from Sammobile.
I rooted my phone, it worked then I tried to replace the mixer files and I ended up with softbrick and the Download mode error above^ . I can still use TWRP but nothing else..Ty for help
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.

[/COLOR]
Uzair40 said:
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.
Click to expand...
Click to collapse
hey, can you help me please, I have searched enough but unable to find any solution.
I tried Odin to flash Indian firmware on my Australian Optus phone (Note 5) and got failed message in Odin. I tried SmartSwitch as well but unable to find S/N number for my phone. Now My phone is stuck on Odin mode. Please help.

PLEASE HELP Note8 hang the logo

PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start

I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts

m4gicvn said:
PLEASE HELP Note8 hang the logo
The problem is as follows:
When I make a software update for the SM-950f / DS, the phone hangs on the samsung logo
I searched and flashed again with Odin but the result was an error
At startup the error message: kernel rev check fail device 2 binary 1
I flash twrp-3.1.1-0-greatlte_V3 the error: flash fail
Flashing TWRP-3.2.3-TwrpBuilder-greatlte-2018-08-21_17-30 similar results
Now I do not know how to start
Click to expand...
Click to collapse
For the TWRP error, are you wiping data (where you have to type yes) first? If you do not do that TWRP won't work. There is also newer versions of TWRP available.

Logel said:
I think you use the wrong Odin Version. You need Odin v3.13.1.
You used twrp already before your Software Update? Or why you want to flash TWRP?
Normally it's enough to flash a 4 part stock firmware to get your device working again. Use the "home CSC" file to don't lose your own files.
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful

Logel said:
Edit:
on your first try it looks like you tried to flash an older firmware version. You can't downgrade the bootloader. Flash the same or a newer firmware.
Don't be afraid to hit the "Thanks" button if someone helped you. It don't hurts
Click to expand...
Click to collapse
m4gicvn said:
Previously my phone was not rooted or installed TWRP, everything original.
The phone announces a new software update, I make updates and the result is a phone hang on the samsung logo
I downloaded a stock rom, I made Flash with Odin 3.13.1 but the result was a bug, now I do not have a Bootloader. I found out that I was flashing an old version.
So I need Flash recovery, I was trying to find a new version but as a result I could not successfully flash.
I have been trying to find a newer Fimware (such as Android 8) but now I'm still not successful
Click to expand...
Click to collapse
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware here (same firmware for n950fd and n950f) - use samfirm program for faster download (only latest ver).

bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware .
Click to expand...
Click to collapse
Very thank you
I downloaded the android version 8, I successfully flashed. But this time it was like the beginning. the phone is moving, into the upgrade and error, android child back
Then the phone automatically enters recovery mode
I implemented the wipe cache and wipe data but could not change the result

bluecub1st said:
What do you mean you cannot flash and you don't have a bootloader?
"kernel rev check fail device 2 binary 1" means your device is binary 2 and you're trying to flash binary 1 onto your device.
e.g the latest version firmware for note 8 is N950FXXU4CRGA - U4 shows this firmware is binary 4. On the bootloader - SWREV B:1 - this should show if your device is binary 1.
You will need to first oem unlock the device to flash TWRP/custom img. Warning- flashing TWRP will result in KNOX 1.
Note - bootloader should still be there (you might just have drained all your battery) unless the flash failed during flashing bootloader (bootloader is download mode).
Download firmware
Click to expand...
Click to collapse
How to oem unlock the device?

To oem unlock (like all the new samsung devices) you must enable it in the developer options in settings.
As your phone would not boot oem unlock is not available. you must first ensure the phone can boot to stock firmware

NOTE 8 N950U sideload OTA problem

having this strange issue if someone could help me plz!!!
Have a NOTE 8 N950U model single sim.
Baseband: N950USQU5CRG7
build: N950USQS4CRE1
i try to download an OTA package from firmware science site for the build CRE1 and try to sideload via ADB
it gives error that the phone has samsung fingerprint N950USQU5CRG7
i downloaded another OTA file for the build N950USQU5CRG7 but this time it said the build requires N950USQU5CRG7 but my phone has N950USQU5CRG7 and fails
strange its not taking updates. also when i try to check for manual updates from settings it says "registering failed" n then "process failed"
help plz anyone
it's unlocked for all networks

dartoo said:
having this strange issue if someone could help me plz!!!
Have a NOTE 8 N950U model single sim.
Baseband: N950USQU5CRG7
build: N950USQS4CRE1
i try to download an OTA package from firmware science site for the build CRE1 and try to sideload via ADB
it gives error that the phone has samsung fingerprint N950USQU5CRG7
i downloaded another OTA file for the build N950USQU5CRG7 but this time it said the build requires N950USQU5CRG7 but my phone has N950USQU5CRG7 and fails
strange its not taking updates. also when i try to check for manual updates from settings it says "registering failed" n then "process failed"
help plz anyone
it's unlocked for all networks
Click to expand...
Click to collapse
I hace same problem dude... please help us

jery grande said:
I hace same problem dude... please help us
Click to expand...
Click to collapse
i have found the solution. i just flashed One UI 9.0 on my N950U
you have to download the latest stock ROM 9.0 from SAM MOBILE or links in XDA forums
Download ODIN.
Download the N950USQU5DSC1 ROM package and extract it.
Select the AP, BL, CP and CSC file (dont use HOME_CSC)
leave out the USERDATA file its bloatware
Put phone in Download Mode after turning it off. (HOME + POWER DOWN + BIXBY BUTTON). it will take u to blue screen and ask u to continue.
after that click start in Odin. it will flash ur ROM
do a wipe cache partition and restart
Android 9.0 installed

dartoo said:
having this strange issue if someone could help me plz!!!
Have a NOTE 8 N950U model single sim.
Baseband: N950USQU5CRG7
build: N950USQS4CRE1
i try to download an OTA package from firmware science site for the build CRE1 and try to sideload via ADB
it gives error that the phone has samsung fingerprint N950USQU5CRG7
i downloaded another OTA file for the build N950USQU5CRG7 but this time it said the build requires N950USQU5CRG7 but my phone has N950USQU5CRG7 and fails
strange its not taking updates. also when i try to check for manual updates from settings it says "registering failed" n then "process failed"
help plz anyone
it's unlocked for all networks
Click to expand...
Click to collapse
dartoo said:
i have found the solution. i just flashed One UI 9.0 on my N950U
you have to download the latest stock ROM 9.0 from SAM MOBILE or links in XDA forums
Download ODIN.
Download the N950USQU5DSC1 ROM package and extract it.
Select the AP, BL, CP and CSC file (dont use HOME_CSC)
leave out the USERDATA file its bloatware
Put phone in Download Mode after turning it off. (HOME + POWER DOWN + BIXBY BUTTON). it will take u to blue screen and ask u to continue.
after that click start in Odin. it will flash ur ROM
do a wipe cache partition and restart
Android 9.0 installed
Click to expand...
Click to collapse
I did.. but in odin it says failed. what should i do?

jery grande said:
I did.. but in odin it says failed. what should i do?
Click to expand...
Click to collapse
turn off phone. take it to download mode not recovery
Press (HOME - BIXBY, POWER and VOLUME DOWN)
it will go to BLUE SCREEN and press volume UP to continue
connect to PC / Laptop and beging ODIN. also load up files in ODIN before going to DOWNLOAD MODE.
i just did it successfully

dartoo said:
turn off phone. take it to download mode not recovery
Press (HOME - BIXBY, POWER and VOLUME DOWN)
it will go to BLUE SCREEN and press volume UP to continue
connect to PC / Laptop and beging ODIN. also load up files in ODIN before going to DOWNLOAD MODE.
i just did it successfully
Click to expand...
Click to collapse
maybe i have downloaded wrong firmware? im running on
baseband N950USQU5CRG7
build number R16NW.N950USQU5CRG7
Android version 8.0.0
Service provider SAOMC_SM-N950U_OYN_XAA_OO_0008
XAA/XAA/SPR
what firmware should i download?

jery grande said:
maybe i have downloaded wrong firmware? im running on
baseband N950USQU5CRG7
build number R16NW.N950USQU5CRG7
Android version 8.0.0
Service provider SAOMC_SM-N950U_OYN_XAA_OO_0008
XAA/XAA/SPR
what firmware should i download?
Click to expand...
Click to collapse
i think you have a SPRINT NOTE 8 or is it carrier unlocked? also is it N950U?
N950USQU5DSC1 firmware is latest pie. download it from samfirmware or updato
i downloaded and flashed N950USQU5DSC1. now i have pie

jery grande said:
maybe i have downloaded wrong firmware? im running on
baseband N950USQU5CRG7
build number R16NW.N950USQU5CRG7
Android version 8.0.0
Service provider SAOMC_SM-N950U_OYN_XAA_OO_0008
XAA/XAA/SPR
what firmware should i download?
Click to expand...
Click to collapse
same build as mine. could you post a pic of whats failing
i think you have a SPRINT NOTE 8 or is it carrier unlocked? also is it N950U?
N950USQU5DSC1 firmware is latest pie. download it from samfirmware or updato
i downloaded and flashed N950USQU5DSC1. now i have pie

Stock Firmware Problem

I recently got SM-N960N note 9 it has SKC carrier firmware. It is unlocked already. I wanted to flash Non-carrier firmware pda: N960NKSU3CSJ1 csc: N960NOKR3CSJ1 .
Download mode:
SM-N960N
Current binary : samsung official
Oem lock: OFF
FRP lock : OFF
KG State : checking
warranty void 0x1
.
.
Here is the problem: After i flash that firmware, ODIN says pass (finished 1min28secs) then reset and phone restarts. But it is constantly waiting at "Installing system update" stuck here for too long time it is just stuck never continue. What should i do ? Also what is unlocked phone means ?

xx98burak98xx said:
I recently got SM-N960N note 9 it has SKC carrier firmware. It is unlocked already. I wanted to flash Non-carrier firmware pda: N960NKSU3CSJ1 csc: N960NOKR3CSJ1 .
Download mode:
SM-N960N
Current binary : samsung official
Oem lock: OFF
FRP lock : OFF
KG State : checking
warranty void 0x1
.
.
Here is the problem: After i flash that firmware, ODIN says pass (finished 1min28secs) then reset and phone restarts. But it is constantly waiting at "Installing system update" stuck here for too long time it is just stuck never continue. What should i do ? Also what is unlocked phone means ?
Click to expand...
Click to collapse
Since your download mode shows FRP OFF & OEM LOCK OFF nothing to worry it's fully unlocked.
It just looks to me that some partitions might got corrupted during flashing process.
I suggest you flash twrp recovery first via odin
Then boot into twrp recovery manually
go to wipe section in twrp and format data.
Then reboot twrp recovery again and go to wipe and wipe dalvic cache+data+system+cache+internal storage
Your all partitions are clean now and decrypted.
Then flash stock firmware again
Reboot phone and be patient for few minutes.
Hopefully this should work without issues.

Trex888 said:
Since your download mode shows FRP OFF & OEM LOCK OFF nothing to worry it's fully unlocked.
It just looks to me that some partitions might got corrupted during flashing process.
I suggest you flash twrp recovery first via odin
Then boot into twrp recovery manually
go to wipe section in twrp and format data.
Then reboot twrp recovery again and go to wipe and wipe dalvic cache+data+system+cache+internal storage
Your all partitions are clean now and decrypted.
Then flash stock firmware again
Reboot phone and be patient for few minutes.
Hopefully this should work without issues.
Click to expand...
Click to collapse
I flashed TWRP and it is stuck too
TWRP screen is just waiting constantly now. Seems I cant go recovery... I think maybe firmware was broken.
Model: SM-N960N
Version: N960NKSU3CSJ1/N960NOKR3CSJ1/N960NKOU3CSJ1/N960NKSU3CSJ1
OS: Pie(Android 9)
Filename: SM-N960N_1_20191014163901_mqqoydk22i_fac.zip.enc4
Size: 4298148096 bytes
LogicValue: h7d2bh2hwlojzdq8
i am downlading this. I could not find any link of this build. Have anyone has link for that firmware ?

Why i cant flash stock n960f firmwares ? it has same hardware... anyway to flash stock n960f to n960n ?
okay i flash that firmware and it is again CARRIER VERSION ... When booting i dont want to see SKC telecom and i dont want my phone has carrier functions such as T1Phone etc. What should i do ?

I flashed
PDA N960NKSU3CSG3
CSC N960NOKR3CSG3
firmware. I got "installing system update" stuck again... What the heck ?

Also i say flashes takes 1min28secs. It is too less to me i think. AP file at least 3600mb and i connected usb 2.0 port to odin. 3600mb/88secs=40.9mb/s , is this normal ?

Okay now i understand whats happening. I flash too many roms. I tried dm verity twrp or other version of PIE's . Every flashing rom nothing change my current rom. Odin says PASS no error but its still same. No change. What is happening someone help please ??

xx98burak98xx said:
Okay now i understand whats happening. I flash too many roms. I tried dm verity twrp or other version of PIE's . Every flashing rom nothing change my current rom. Odin says PASS no error but its still same. No change. What is happening someone help please ??
Click to expand...
Click to collapse
I also have the n960n, tried to flash it to a non carrier and failed every time. I tried using the KOO version, I think that's the non carrier Korean version that didn't work.
I was told from few XDA forum's members that is not possible to flash an n960n to a n960f with official firmware unless you use custom firmware.

trannote9 said:
I also have the n960n, tried to flash it to a non carrier and failed every time. I tried using the KOO version, I think that's the non carrier Korean version that didn't work.
I was told from few XDA forum's members that is not possible to flash an n960n to a n960f with official firmware unless you use custom firmware.
Click to expand...
Click to collapse
You have exact same problem with me comrade! I cant change my carrier flash. Everytime it is opening with SK telecom and i am very tired of this ****. That's my fifth day of effort. But still i cant change carrier flash with i found KOO firmwares. So i decided to flash modified stock rom from alenxdre(?) devb 6.0
1) Be sure KG state is checking
2) Flash TWRP via ODIN
3) format data (be careful) and reboot to recovery again
4) wipe all partitions except extsdcard and usb otg
5) Download DM-verity file and flash it with ur extsdcard in TWRP install option. (I dont know why i did this but it worked atleast so i dont know its necessary or not...)
6) Flash Devb 6.0 modified stock rom for n960n
7) Flash magisk root zip file
8) Wıpe factory data if it is required
9) If it is works (at least worked for me) you wont see boot animation of carrier(finally!)
10) But it is still says YOU ARE SKC service provider (What da heck man ??)
After this you have functionable TWRP and MagısK root so you can do anything you want. Go play store and download Phone INFO *SAM* program. That program needs root and it has tool "CSC CHANGER (ROOT)". Since we have only 4 option: SKC, KTC, LUC, and finally KOO !! , Opening tool will redirect you to rom's preconfig CSC change menu and you can select KOO from there. I selected it. Rebooted. TWRP did some update to system and HOLA! My phone is KOO after these all instructions. Good to go. Or not ? Phone info program still says your phone's ORIGINAL FIRMWARE SERVICE PROVIDER IS SKC!!?? Yes we change it to KOO but truth is i could not find any KOO firmware even i flashed modified stock firmware...
Yes i succeeded with this way but thats modified stock rom. It has same appearence with stock rom and good for me. No problem imo. But the real problem: WHY ALL FIRMWARES SAYS SKC? I tried at least 10 different same firmware pda csc cp or different with same modem number, i could not succeeded...
SOMEONE SHOULD HELP US!

xx98burak98xx said:
You have exact same problem with me comrade! I cant change my carrier flash. Everytime it is opening with SK telecom and i am very tired of this ****. That's my fifth day of effort. But still i cant change carrier flash with i found KOO firmwares. So i decided to flash modified stock rom from alenxdre(?) devb 6.0
1) Be sure KG state is checking
2) Flash TWRP via ODIN
3) format data (be careful) and reboot to recovery again
4) wipe all partitions except extsdcard and usb otg
5) Download DM-verity file and flash it with ur extsdcard in TWRP install option. (I dont know why i did this but it worked atleast so i dont know its necessary or not...)
6) Flash Devb 6.0 modified stock rom for n960n
7) Flash magisk root zip file
8) Wıpe factory data if it is required
9) If it is works (at least worked for me) you wont see boot animation of carrier(finally!)
10) But it is still says YOU ARE SKC service provider (What da heck man ??)
After this you have functionable TWRP and MagısK root so you can do anything you want. Go play store and download Phone INFO *SAM* program. That program needs root and it has tool "CSC CHANGER (ROOT)". Since we have only 4 option: SKC, KTC, LUC, and finally KOO !! , Opening tool will redirect you to rom's preconfig CSC change menu and you can select KOO from there. I selected it. Rebooted. TWRP did some update to system and HOLA! My phone is KOO after these all instructions. Good to go. Or not ? Phone info program still says your phone's ORIGINAL FIRMWARE SERVICE PROVIDER IS SKC!!?? Yes we change it to KOO but truth is i could not find any KOO firmware even i flashed modified stock firmware...
Yes i succeeded with this way but thats modified stock rom. It has same appearence with stock rom and good for me. No problem imo. But the real problem: WHY ALL FIRMWARES SAYS SKC? I tried at least 10 different same firmware pda csc cp or different with same modem number, i could not succeeded...
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US![/QUOTE]
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?

trannote9 said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?[/QUOTE]
Modified stock rom has no carrier apps u can guess

trannote9 said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
---------- Post added at 12:20 PM ---------- Previous post was at 12:16 PM ----------
SOMEONE SHOULD HELP US!
Click to expand...
Click to collapse
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?[/QUOTE]
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version

xx98burak98xx said:
I gave up at end. You can find the KOO version at sammobile. Thanks for the instruction, did you manage to get rid of the carrier apps?
Click to expand...
Click to collapse
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version[/QUOTE]
Are you installing the Stock Samsung N960N OS? If you are make sure that you have all the correct files including the correct USM file loaded before you start the process.

iceepyon said:
Nope like i said: I tried at least 10 firmware from different sites different sources. Every firmware = carrier version
Click to expand...
Click to collapse
Are you installing the Stock Samsung N960N OS? If you are make sure that you have all the correct files including the correct USM file loaded before you start the process.[/QUOTE]
what is USM file ? Yea i tried n960n stock firmwares but i solved the problem and boot animation has been gone. i told what did i do in last posts

How To Guide SAMSUNG S21 ULTRA (G998U) AT&T Dump Reboot & Restart Problem (Resolved).

Hello Everyone
G998U AT&T Reboot & Restart Problem Resolved Two methods Below.
Note. Do this procedure at your own risk.
Phone turn on Automatically Reboot & Restart Problem.
1st (method). basically this issue firmware Not Updated.
Go to setting and Software Update
You have done Software Update.
Resolved this issue.
If your phone is not updating automatically. And You searched a lot on the internet and not found G998U At&t Firmware. (Binary 2,3,4,5).
Or by mistake you flash an other carrier flashed. Or you have checked all the carrier and flash them. Even then the problem of repeated reboot & Restart is not resolved.
Carrier Example (SPR | TBM | USC | VZW)
2nd (methods). You need download
Download Odin
Link https://odindownload.club/odin-3-14-1-patched-modded-for-windows.
#1) If you have a Binary U4 or S4
Download this firmware Full file CSC Code USC (USC_G998USQU4AUF5)
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU4AUF5
All File flash Them.
Example. (AP Load BL Load CP Load CSC Load In Odin) Don't Need Home CSC file.
Flashing Done Resolved Dump Restart & Reboot Problem.
#2) If you have a Binary U5 Or S5
Download this firmware Full file CSC Code USC (USC_G998USQU5CVG9)
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU5CVG9
All File flash Them.
Example. (AP Load BL Load CP Load CSC Load In Odin) Don't Need Home CSC file.
After flash done reboot phone (again Dump Restart & Reboot Problem) ‍. turn off phone go to download mode flash Again below file
this file (USC_G998USQU5BULJ) only Download CP File and CSC File
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU5BULJ
Example. (CP Load BL Load in Odin)
Flash Done Restart after 10 to 20 Seconds Factory Rest Option See. You should Factory Rest.
Resolved Dump Restart & Reboot Problem.
All Methods Done but not Restart & Reboot Problem Resolve. You need Chimera Tools. Binary Downgrade U4 And Than Try This 2nd (Method) Above #1
if Have any issue Ask with me.
Thanks