I just got a new car and it has a spiffy usb hook up where you can plug in an ipod/flash drive/phone and it will play music off of it. The ipod works amazingly with the stereo system, displaying titles and artist as well as making navigation really easy. The display/navigation is **** when hooking up a flash drive/phone.
It would be amazing for my phone to work the same way as the ipod.
Right now there doesn't seem to be anything like that out. I know that I probably can't change anything with the way the car's stereo system recognizes and plays devices, so that means the hack would have to be on the phone. The only way I can think it would work is the make the phone spoof as an ipod when connected to the car's usb hook up.
I'd like to know if anyone has tried doing this before, maybe on a different phone or device? Is this possible at all, and if so, where would I start?
The phone I have now is a Captivate running Serendipity rom and the car is a 2010 Honda Civic.
This would be an excellent idea for an app. I hope this can be made possible
Have you tried putting the phone in USB storage mode? Either through the standard menu items, or enable USB debugging, and enable it after you plug it in.
Sent from my Captivate running Continuum 5.5
The mass storage thing works for just playing music but it displays songs terribly, usually just by track number and the number (not the name) of the folder, sorted by creation date. It's basically impossible to use if you have more than a small amount of songs.
I just connect the phone to my car stereo via BT, plug the phone into a car charger, set the display to always on, place it in my dash mount to the right of my steering wheel and use the phone to see the Now Playing info. My steering wheel controls work the phone just fine so I can skip foward/back and raise/lower volume. When I shut the car off the music automatically pauses until I come back and it automatically reconnects to the radio and I just hit Play again.
Miami_Son said:
I just connect the phone to my car stereo via BT, plug the phone into a car charger, set the display to always on, place it in my dash mount to the right of my steering wheel and use the phone to see the Now Playing info. My steering wheel controls work the phone just fine so I can skip foward/back and raise/lower volume. When I shut the car off the music automatically pauses until I come back and it automatically reconnects to the radio and I just hit Play again.
Click to expand...
Click to collapse
My car doesn't have blue tooth so this isn't really an option right now.
I'm actually willing to write an app for this, but I'm not sure entirely where to start. The biggest unknown is how the stereo system recognizes ithe ipod and what it sends/receives to/from the ipod.
If I had some starter code where someone did something similar or documentation on how the ipod works of usb I should be able to at least start writing an app for this.
dpayne19 said:
If I had some starter code where someone did something similar or documentation on how the ipod works of usb I should be able to at least start writing an app for this.
Click to expand...
Click to collapse
Probably not going to find that in here.
I would look up what kind of stereo the car has and the technology it uses. I can bet there is a forum out there on that type of stereo. Your probably not the only one with this question.... If you can list the specs i will look into it myself.
echonc said:
I would look up what kind of stereo the car has and the technology it uses. I can bet there is a forum out there on that type of stereo. Your probably not the only one with this question.... If you can list the specs i will look into it myself.
Click to expand...
Click to collapse
The car is a 2010 Honda Civic Ex. I don't know what the stereo system is, it's what ever comes stock.
Welcome to proprietary apple exclusive deals. Do you think the ipod integration and lack of android integration is accidental?
By all means if you can write an app that will make android phones work with iphone docks and compatible stereos more power to you.
It would definitely involve reverse engineering closed source apple code.
I ordered the Kenwood DDX9902S the other day, should arrived on the 28th and I will install on the weekend.
Going to install in my 2014 Mazda CX-5 Touring with Bose system.
I chose the DDX9902S over the DDX9702S because it's only $50 more and has 2 more bands of EQ and 2 years of warranty vs 1, and some other stuff.
I chose it over the Pioneer AVIC-4100NEX because it can do the screen mirroring and control the Phone from the touchscreen. (Though the damn Nexus 6 doesn't support video out damn it).
It is too bad the Kenwood only has 1 USB input though, and the Pioneer has TWO and also has an SD card slot. Does a USB hub work?
I'll have to do some creative wiring so I can swap out cables for card reader/etc if I want to view movies and such. The Kenwood can playback mkv files, didn't look up if the Pioneer can.
Ordered it from Crutchfield, $749 + $79 for the steering wheel control/wiring harness, free antenna and dash kit. Since it's so new, it's the same price elsewhere on the internet.
The Crutchfield Mastersheet is stupid. It only shows you how to take out factory audio unit and speakers, nothing about wiring at all. If buying stuff is cheaper elsewhere, do it.
Going to wire up my factory rear view camera to the Kenwood, from the Mazda forums, someone detailed how to do it. Got the items today and will get it prepared for next weekend to install by myself. I'll report back, I might also do a YouTube video since this unit is so new and no one has it.
What phone are u currently using???
cerobles1 said:
What phone are u currently using???
Click to expand...
Click to collapse
Nexus 6
nxt said:
it can do the screen mirroring and control the Phone from the touchscreen. (Though the damn Nexus 6 doesn't support video out damn it).
It is too bad the Kenwood only has 1 USB input though, and the Pioneer has TWO and also has an SD card slot. Does a USB hub work?
Click to expand...
Click to collapse
So you expect to mirror, instead of running Android Auto ?
Pioneer is limited in what it can do on each port. I think iPhone/iPod goes to port 2 while firmware updates and Android Auto are port 1.
In theory, anywhere a phone works, a phone plugged into a USB hub should work. But don't underestimate the need to get a quality hub and cables for reliable connections.
I have no idea if the Kenwood supports flash or other USB stuff besides a phone, and at the same time a phone is connected.
mikereidis said:
So you expect to mirror, instead of running Android Auto ?
Pioneer is limited in what it can do on each port. I think iPhone/iPod goes to port 2 while firmware updates and Android Auto are port 1.
In theory, anywhere a phone works, a phone plugged into a USB hub should work. But don't underestimate the need to get a quality hub and cables for reliable connections.
I have no idea if the Kenwood supports flash or other USB stuff besides a phone, and at the same time a phone is connected.
Click to expand...
Click to collapse
No, I will use Android Auto but would like to check out the screen mirroring too, for apps that don't support Auto / 'appradio' yet.
I've downloaded the manual and the Kenwood does support movies and music on a USB flash drive, but no mention of hubs or simultaneously connected to phone.
I just installed the DDX9702s over the weekend. It's a pretty good unit, Android Auto works flawlessly with my Sony Z3, and the external GPS makes it super accurate. Kenwood's interface is so freaking ugly though
Android Auto is also incredibly finicky on my wife's OnePlus with CyanogenMod. I flashed to 12.1 nightlies hoping to resolve some of the issues but it's no better.
The iDatalink Maestro was also fun to install, it requires taping some wires on your ODBII port. My tip there is grab a right-angle generic ODBII to Serial cable on Amazon/Ebay for $10 then cut it up and splice it into the iDatalink Meastro harness. That way you can just plug it in rather than t-taping or hard-wiring the maestro cable to your car. You can also re-pin the ODBII port as well, but splicing an extra ODBII cable seemed like the best option if I ever want to go back to stock.
jonowar said:
Android Auto is also incredibly finicky on my wife's OnePlus with CyanogenMod. I flashed to 12.1 nightlies hoping to resolve some of the issues but it's no better.
Click to expand...
Click to collapse
Doesn't start or what ? Sometimes enabling/disabling USB debugging can help with getting a phone connected.
I saw the news about 1+2 not having NFC. It appears NFC is required to trigger Android Auto over Wifi connections, so that could be an issue for the new 1+2.
mikereidis said:
Doesn't start or what ? Sometimes enabling/disabling USB debugging can help with getting a phone connected.
I saw the news about 1+2 not having NFC. It appears NFC is required to trigger Android Auto over Wifi connections, so that could be an issue for the new 1+2.
Click to expand...
Click to collapse
Yea, it won't start unless I "forget all cars" and go through the acceptance dance again then most of the time it freezes or just shows a blank black screen. I can't believe how much difference the Sony Z3 is, it works flawlessly every time.
jonowar said:
Yea, it won't start unless I "forget all cars" and go through the acceptance dance again then most of the time it freezes or just shows a blank black screen. I can't believe how much difference the Sony Z3 is, it works flawlessly every time.
Click to expand...
Click to collapse
It MIGHT be due to bad USB connections; maybe the USB port isn't tight.
Android Auto tends to freak out if USB isn't a perfect connection.
mikereidis said:
It MIGHT be due to bad USB connections; maybe the USB port isn't tight.
Android Auto tends to freak out if USB isn't a perfect connection.
Click to expand...
Click to collapse
I'm using the same cable for my Sony though, which means it's the port on the OPO which is only a few months old
I'll give it a shot with the official OPO cable just to make sure.
I guess it's time for USB C.
jonowar said:
I'm using the same cable for my Sony though, which means it's the port on the OPO which is only a few months old
I'll give it a shot with the official OPO cable just to make sure.
I guess it's time for USB C.
Click to expand...
Click to collapse
I'm not saying that it IS the port, just that it's a possibility.
I have about 15 test devices and I don't think any ports are bad, even after years of use.
I DO have cheap USB cables that are pretty bad though.
Trying other cables is the best idea I have, besides wiggling the cable a bit to see if Android Auto stops.
mikereidis said:
I'm not saying that it IS the port, just that it's a possibility.
I have about 15 test devices and I don't think any ports are bad, even after years of use.
I DO have cheap USB cables that are pretty bad though.
Trying other cables is the best idea I have, besides wiggling the cable a bit to see if Android Auto stops.
Click to expand...
Click to collapse
Hey, you were right! The OPO cable works perfectly! Thanks for the tip.
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Frankenberrie said:
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Click to expand...
Click to collapse
Awesome! thanks for the heads up, 100mb.
It says to do a reset after, is that necessary, kenwood has a ton of settings.
nxt, been eagerly waiting for your DDX9902S in depth review. Did I miss it? If so, please point me in the right direction. If not, I'd love to hear your thoughts now that you've been using it for a few months, especially if you've had a chance to compare it to the 4100NEX and from an Android perspective (mirroring vs Auto). Thanks
Frankenberrie said:
Have the same unit... Love it, look on the Kenwood website, there is a firmware upgrade for our units
Click to expand...
Click to collapse
senseimike said:
nxt, been eagerly waiting for your DDX9902S in depth review. Did I miss it? If so, please point me in the right direction. If not, I'd love to hear your thoughts now that you've been using it for a few months, especially if you've had a chance to compare it to the 4100NEX and from an Android perspective (mirroring vs Auto). Thanks
Click to expand...
Click to collapse
I wrote a pretty long review on Crutchfield but ran out of space. I ended up not making a video review because... it's not that great.
Just like any head unit, the regular UI for radio/settings/menus/audio/etc is ugly.
Anyways, here's some info going from the HU itself then Android Auto.
The Kenwood only has 1 USB. It charges your phone very very slowly, but it can charge it to 100% if you keep it connected long enough even while using Android Auto. (I do 6-7hour drives every other weekend).
1 USB, so 1 USB device connected and that's it. The Pioneers have a dedicated SD card slot, you can store music on it and leave it in there forever.
Putting about 64GB of music on a USB 3.0 Flash drive, the Kenwood took a very long time to get complete ID3 tags. So I'm forced to listen to Adele when it starts up, or manually choosing another folder before I can shuffle ALL songs.
The Kenwood supports various file formats, it can even play video files! Too bad all the .MKV files I have, no audio is decoded.
Bluetooth audio. Very little lag, steering wheel control to skip tracks almost instantly changes the tracks. My stock HU there was 2-3 second delay. ID3 tags show up properly. I primarily use Google Play Music app. I mostly use Android Auto mode when using to music though.
Bluetooth Phone. Works fine, I have a 2014 Mazda CX-5, I put the microphone where the stock microphone was. People can hear me perfectly. Android Auto voice commands have no issues hearing me either.
I have a Nexus 6 and when it was on 5.x.x, the Bluetooth Phonebook on the headunit would be SCREWED UP. No names, and just a ton of phone numbers. I installed Android 6.0 that was released a few days ago and Contacts information show up perfectly.
The Kenwood's backup camera input works really well. I can turn on the car and as the Kenwood is still booting up, if I put the car in reverse, the backup camera would be displayed! I'm pretty surprised with this and love it. The Kenwood takes a while to boot up.
The Kenwood, like most high end HUs have a TON of audio settings. I'm no car stereo buff so I mostly leave everything at default since I don't know half of what the settings mean. Each audio input has it's own audio setting which is great. My car has the factory Bose system and it sounds even better with the Kenwood.
The Kenwood has built in iHeartRadio/Pandora/Aupeo! "apps" that's supposed to work with your phone. It's junk, I've given up trying to make that work and just do regular Bluetooth Streaming.
Kenwood also has a SmartPhone control mode where if you can get your phone to video output into the Kenwood's HDMI or AV input, you can load the Kenwood App, and control your phone from the Kenwood's touchscreen, so you can use Waze or other apps directly. The app sucks and doesn't get my touches correctly. Don't rely on it, it's not reliable.
So yeah it has 1 HDMI input you can use with your iPhone using video adapter, or Android or whatever else.
It has DVD slot for movies/audio cds, I've never used it.
HD Radio. The radio interface really sucks, but it works. The way to change an HD station from HD1 to HD2 is really dumb and annoying. it has 3 different "seek" modes when you press the >> or << button. Seek1 auto scans to the next station that it can grab. Seek2 is manual seek. Then there's Auto where it changes to your next Preset.
Then there's the CHup and CHdown buttons. So if you're locked into an HD station and you want to change to HD2 you press the CHup or CHdown button, but that only works if you're in Seek2 (or maybe Seek1, I forgot), if you're not, all it does is the same as >> or <<. It makes no sense because CHup and CHdown acts EXACTLY like the >> and << buttons.
I have a ZuneHD with a special car aux box for it, I use it in AV1, works and sounds fine but when I put it into video mode I get a lot of interference. Not sure if it's the Kenwood or my aux box for it.
The Kenwood's video controls suck too. It's just hard to adjust and get proper color/brightness/etc.
At night, it's too bright, and lowering Brightness and "Blackness" levels, it gets hard to see/read the screen. So to make things clearly readable, screen has to be a little bright. There is a way to set holding Menu button and the screen will turn off until you press screen or a button.
OK Android Auto, I won't talk about Android Auto itself, there's many reviews and videos about it. I'll talk about how well it works with the Kenwood.
When it works it's great, but it's a coin toss if it'll work great on this drive, or the next.
Plug in USB cable to the phone and you're prompted to press OK on a warning screen on the Kenwood. The Apps icon turns into Android Auto.
Again, when it works, it works. Here's when it doesn't:
On my road trips, I would get into car, search the destination, and start navigation.
About 5 minutes later, Android Auto on the Kenwood would shut off and you're taken back to the main menu and the Apps icon return. Phone's Android Auto app is shutdown. There's no way to relaunch Android Auto without unplugging the USB and plugging it back in. On my last road trip, I did this about 4-5 times, then I decided to start Play Music while navigating, then it worked and had no issues. On my drive home, I started music right away with navigation and it still shutdown every few minutes. Unplugging and plugging back a few more times then it worked with no issues. It's completely random.
On my drive to work and back home, I drive through some low cell signal areas. When my phone looses signal and then catches signal back, Android Auto's screen would BLINK. Navigation wouldn't stop, music wouldn't stop, the screen would just BLINK. It's distracting.
Phone calls go through Bluetooth still, but it works well from the Android Auto screen. I'm sort of impressed how it works.
It's possible to listen to another audio source (HD Radio, CD, etc) while in Android Auto navigation, just press menu button, pick your source, then go back to Android Auto.
Android Auto I believe needs a lot of work. It's still in its infancy and the missing features and odd limitations Google has with it frustrates and confuses me.
Kenwood released a firmware update 9/17/2015.
Changelog is: Changed the specification of Volume function. Improved stability.
I hadn't noticed any improved stability.
That's all for now. Ask your questions and I'll try to answer them.
About Mirroring vs. Android Auto.
My Nexus 6 unfortunately does not support video out. I'm pretty pissed. The new Nexus 6P won't either, damn it Google!
So what I did to test was to hook up a Chromecast to the Kenwood's HDMI input.
Then I would set up my phone to be a hotspot, the Chromecast would connect to it, then I was Cast my Phone's screen to the Chromecast. Totally going in a circle LOL. (This will eat up your cell data FYI).
But it does work and my screen shows up on the Kenwood's screen.
The issue is the Kenwood's SmartPhone Control app like I mentioned in the above post.
It does not sync up properly so my touches on the Kenwood's screen, does not touch the right area of my Phone's screen.
I've never used the Pioneer 4100 so unfortunately I can't compare.
I believe that having TWO USB ports on the Pioneer and a dedicated SD card slot is BIG!
It's so annoying swapping out my Phone with a USB Flash drive.
If I were to do it again, I would probably get the Pioneer because of the TWO USB and SD card slot.
I chose the Kenwood because of the higher audio capability (EQ) and the App Mirroring (which sucks now that I've tried it), also it was cheaper than the comparable Pioneer high end model.
Hello, I ordered a DDX9702S and installed it in my '09 Civic Si. I've got a Nexus 6P and have been experiencing odd audio glitches, and I was wondering if you could test something for me.
When I play music, everything is fine until I get an audible notification or use the Voice Search. After that there is an audible buzzing/frying noise in the tweeters of my stereo when a bassy note hits. Once the noise starts, it doesn't stop until I reboot my head unit. Could you see if you have the same problem? I don't know whether it's Android Auto in general, my Kenwood stereo, or what. I've also reproduced the issue with 2 other Nexus 6P's and a Nexus 5, so I know it's not just my phone or model. I know yours is a different model, but it's worth a try to see if it's just me.
Steps to reproduce:
App to use:
Either Google Play Music All Access or Spotify
Song to use:
Rearrange by Vérité - the beginning of the song is quiet with a bassy beat, making it easy to spot the distortion / static.
Steps:
Turn on the head unit and plug in your phone (I used a Nexus 6P and a Nexus 5)
Once Android Auto is running, go to your music app and play Rearrange by Vérité. I find its easier to play the song if you add it to a playlist titled "1" (without the quotes) first, so it's at the top of your playlists.
You'll notice that the beginning of the song is quiet with a bassy beat. After about 10 seconds, hit the microphone in the top right of the screen to activate the Google Now Voice feature. Once it gives an audible beep, hit the microphone button again to cancel.
Hit back on the screen to start the song over. At this point, on my stereo, every bassy beat is accompanied by a static in the tweeters of my stereo. This happens on every song I play, even the radio, but it's much easier to hear on quiet songs like the one I gave as a suggestion to test with.
The static continues even if you disconnect/reconnect the phone. The only think that stops it is restarting the head unit by turning it off and back on. If you use Google Now again or a notification comes in and makes an audible sound, the static will come back. It seems, to me, that any notifications or audio playback from an Android device will cause the head unit to distort the sound until the head unit is rebooted. If nothing happens to cause the distortion, sound quality is stellar.
Hope you're able to test this, and thanks in advance!
DDX9702S
Sent from my Nexus 6P using XDA-Developers mobile app
Hello all, I had a Son XAV-601BT, which was supposed to be a very promising and awesome android headunit, but ended up being a dud because mirrorlink doesn't work well, etc, I can only connect my phone with bluetooth and play music through it. I just got a Nissan Titan and want to up my in car experience. I had a good bit of audio equipment I took out of my old 240sx and was going to reuse it, which included the 601BT, 2 kicker amps (one for the sub, another 4 channel for speakers), and polk audio speakers, but the headunit is basically.. meh.
I was wondering what would be the ideal route to go to get the best experience. I know they have head units that have all the android auto stuff built in, but since I already have a nice amp I can use to drive the speakers, would I be better off just using a tablet and getting things connected up that way? I would like to be able to utilize good quality voice for commands and phone calls, but I am not sure if using a tablet for that would work (using the phones capabilities through the tablet to make calls and texts via bluetooth or some other way.)
If anyone has any recommendations on how I can have a nice sized mounted capacitive screen to control my audio (spotify), navigation, and be able to use voice commands (though I could technically just make them through my watch as I have been), I would love to hear some suggestions. If the best route to go would be an actual android auto headunit, then so be it, but I would like to know if alternatives can do this.
See my sig for Headunit app for Android Auto. Nexus tablets are working well with it.
Tablet solution likely takes some time to get it the way you want it, but it makes it very customizable and can be done cheaply-ish.
There are 2 popular lines of $300 Chinese HUs discussed on XDA. They are best described as... the Chinese stuff you find on EBay/Alibaba etc. Source is available but the latest Newsmy is still stuck on Android 4.4.
Or for $500-2k get a Pioneer or Kenwood Android Auto 4100/6100/7100NEX. There's a custom ROM just come out for some Pioneers, but it will take time to mature.
Awesome, thanks for the info. I really appreciate it. I was looking in to some of the interesting setups people have, such as using an Arduino with an IR transmitter that you connect to the tablet, so you can use a standard smaller headunit, hide it in the dash to connect to the speakers and control the volume, and the tablet can be mounted nice, and when you hit the volume etc on the tablet it makes the Arduino blast the IR to the head unit, and it makes the volume go up as if you pressed the button (or in this case, the remote)
That might work well with a head unit app or something similar. I will download the APK's you linked and check them out!
I recently purchased a new VW car and have been using Android Auto on the built in display. The first time I used it it all worked perfectly, since then it hasn't. My Android Auto no longer gives me notifications when I receive texts. And if they do show up on the home screen and I click the play button to read them, it shows the four dots as if its thinking but nothing happens and I have to cancel out of it.
Additionally, I've noticed that my bluetooth smart lock doesn't seem to be working at all. Every time I connect it asks if I want to add my car to my trusted devices. Each time I say yes but it NEVER seems to save it. It will then later sometimes prompt for permission to read my messages. To this I again say yes but it doesn't seem to make the message issue go away even after I do this. I am not sure if these two issues are related (I'm hoping they are).
Can anyone tell me why the hell my smart lock can't seem to register and remember my car? And why wont android auto read my messages properly? (Pixel XL. Phone calls and navigation all are working properly)
Same issue here
You have to give Android Auto all permissions it asks for at the first start. And be sure to use a very good cable. There are many USB C cables on market which are not fully supporting USB C features and the system do expect them.
I'm in the same situation with my VW Atlas. Problem is with both my Pixel (running Android O) and my wife's Nexus 6p (running Nougat). I have given it all permissions, including some that it didn't ask for. I also have been using the little 4 inch cord that came with the 6p, so the cable or its length should not be an issue. In addition to the above, my car also forgets its bluetooth pairings if I try to connect the AA cable before the bluetooth has connected. I've been learning to do that but sometimes I forget. It's got to be an issue with the VW software.
I have come across these issues myself in a Golf Mk7 both with a Motorola Droid Turbo and now with a Google Pixel 3 XL.
In the case of getting Android Auto to read/send messages where you just get the four dots bouncing up and down and doing nothing else, that's a setting with the Google Assistant app. Go into that app on your phone (the round G icon) and drill into settings and under Voice >> Voice Match, make sure "OK Google" detection is turned on. Even though you might not be actually using it, it has to be turned on for this to work. Totally lame and non-intuitive, but that's what fixed that for me.
As for the car falling out of your Smart Lock and for repeatedly prompting you for permission to access your text messages, I have only had this issue with AA in my VW and not in other cars, so it's a VW-specific issue and something to do with the bluetooth hardware. I do not have a fix for it but the workaround is you must have BT turned on on your phone first and let it connect fully to your car OUTSIDE of AA. Make sure at that point you permit text message access (if prompted) and check your Smart Lock and add your car to it if needed. Then going forward whenever you connect to your car you MUST let BT connect fully first before you plug in and fire up AA. It's unfortunate that you can't just plug in and go w/o waiting for BT first but that's the only way I've gotten this to work without re-prompting me for SMS access permissions and Smart Lock.
Good luck!
After I upgraded my Nexus 6 to LOS 18.1, I discovered that Android Auto is included in the necessary package MindTheGapps. I am able to use AA via USB cable in my car (Hyunday i10/2017) and I am beginning to like it. Controlling the music player is so much better in the car's big screen!
I tried to establish a wireless connection using Bluetooth, because the AA app on my phone offers that option, but I can not make that connection, and I am beginning to think I might have a problem of understanding this technique. So I would appreciate a bit of help and explanation here.
Without the cable, just using BT, I am able to select people in the address book and make phone calls. The control buttons on the steering wheel also working perfectly: take calls, hang up, volume control. I guess this is some sort of typical old school free hand phone call protocol.
Also, when on BT, I get minimum control over the phone's music player with the steering wheel buttons, *after* I started the player on the phone's screen: next/previous track, volume control.
When I plug in the USB cable, AA starts and I get full control over the music player using my car's entertainmane screen: I can dig around in artists and albums list, and I can do any thing I can do on the phone's screen.
As said before: the AA app belonging to the MtG package offers to connect AA through BT, and I very much would like a galvanic separation between my car and my phone. But I can not make it work that way.
So, my question is: am I on the wrong track there? Does AA over BT work at all? Or do I need to make a wifi connection? What conditions need to be fitted on the phone, the LOS version, the GAPSS version and the car?
Many thanks in advance!
Wireless AA uses WiFi, you can not do AA with just BT. Your car does not support Wireless AA. You can connect via USB and use AA (it will use BT, too), or you can connect wireless with just BT, without AA.
Thanks!
I was totally confused there, because the AA app in LOS offers wireless connection to the car using BT. If I am getting it right now, that option only applies to streaming phone calls and music to the car.
Wouldn't it be better to label that option otherwise?