Hello everyone,
Recently, I accidentally flashed an OTA update via TWRP. After the process is completed, my phone shutdown. I can't turn it on or enter recovery mode or download mode. It's simply doesn't work.
I tried to connect it to my laptop via USB but nothing happen.
Is there some way to make my phone work again? Does it completely dead?
Please help me. Thank you very much
P/S: sorry for my bad English.
Related
Hi,
I attempted to re-lock and then flash my i9305 yesterday with the latest firmware,
However, I must have done something wrong, but the Odinupdate failed and I now cannot enter Download or Recovery modes from a powered down state.
Instead, I am presented with Firmware upgrade encountered an issue. When I try to power up the device, all I see is this message "Please select recovery mode in Kies and try again."
Even though the handset doesn't boot up properly, Windows seems to detect it and the driver support kicks in but Kies and, ABD and the GS3 toolkit will not recognise the existence of the handset.
Is this now dead and irrecoverable or can I fix this?
I have checked out the usual links on here to see if I can get the handset to startup in recovery mode again.
http://forum.xda-developers.com/showthread.php?p=33227541
I hope someone can help.
Has anyone been able to recover a phone from this position?
Aeroadster said:
Has anyone been able to recover a phone from this position?
Click to expand...
Click to collapse
Looks like I'll need to try a jig. I can't lose too much as they only cost 99p on ebay
Hi,
the USB Jig won't enter Download Mode if you can't do it with Vol Down + Home + Power
First of all sorry for my bad English, I'm not very good
well ... what happens is that I was trying to partition my memory. witch this https://forum.xda-developers.com/lg-l90/orig-development/hack-partition-table-tool-lg-l90really-t2946323
but at the time of reinstalling the system again, I lost the twrp
I tried to see what to do, but to install twrp I needed to go back to the original rom of the cell phone. when connecting the phone to the PC in dowload mode I only see an error with the dirver "mtp"
I reinstalled everything, I already did everything but my cell phone does not connect to the PC
I do not know what to do, I do not have recovery twrp, I can not go back to the origianl rom, nor can I root the phone because it has slimrom installed now
I really need you to help
Josu0545 said:
First of all sorry for my bad English, I'm not very good
well ... what happens is that I was trying to partition my memory. witch this https://forum.xda-developers.com/lg...ck-partition-table-tool-lg-l90really-t2946323
but at the time of reinstalling the system again, I lost the twrp
I tried to see what to do, but to install twrp I needed to go back to the original rom of the cell phone. when connecting the phone to the PC in dowload mode I only see an error with the dirver "mtp"
I reinstalled everything, I already did everything but my cell phone does not connect to the PC
I do not know what to do, I do not have recovery twrp, I can not go back to the origianl rom, nor can I root the phone because it has slimrom installed now
I really need you to help
Click to expand...
Click to collapse
Which variant of the device do you have and can you be more specific with what error there was with the driver.
hello again, can someone suggest me a guide or web page to guide me as unbrick my huawei p10, I do not have access to the fastboot mode and I have TWRP but I can not mount any part of the storage (therefore I can not install .zip or .img ). I think TWRP is blocked but I have been doing it for days and I have not been able to do anything.
Also, I can access the e-recovery and make a factory restoration with a microsd.
I appreciate any help. Thank you.
Can you try to turn off phone completly, then hold volume down and connect usb cabel which is connected to pc?
This is the only way i can put my P10 in fastboot mode
nocio said:
Can you try to turn off phone completly, then hold volume down and connect usb cabel which is connected to pc?
This is the only way i can put my P10 in fastboot mode
Click to expand...
Click to collapse
Yes dude! but the phone dont enter to the fastboot mode... for now i am trying in a technical service u.u
sorry for my bad english...
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Hm.. said:
Hello,
I have a somewhat aged Idol 4 lying here.
This no longer boots or it hangs in the boot loop.
So I tried to install an update via a stock rom from the network via the recovery menu and ADB sideload and always got the error status 7. (Alcatel_Idol_4_6055K_01001_01002_OTA)
Resetting the system didn't help here either.
Then I tried to install TWRP on the device.
But unfortunately both methods that I tried failed.
Once via Sahara & firehose-test and the second was Suger QCT via the download mode.
But both of them got the error message NPRG Error 5002.
I have installed suitable USB drivers.
So my question, does anyone have a tip for me on how I could get the device revived?
And Sorry for my bad english
Click to expand...
Click to collapse
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Perdigon55 said:
Hello, I deleted my system from twr without realizing what I was doing, the result is that I stay on the Alcatel logo. My steps were, the installation of sugar, when it starts not to update the application. Choose the 6055 model, since the 6055P model that is mine does not appear in the drop-down. Before starting sugar, turn off the mobile completely and connect it off to the usb of the pc, check if when connecting it the pc does not detect it, use another cable (there are many cables that only serve to charge and not to read on the pc) Now start sugar, choose the model and click on the Udgrade tab. You will surely get several messages saying that the mobile has been modified and that you lose the guarantee, go ahead accepting the message, in a few minutes you will have it ready. Greetings.
Click to expand...
Click to collapse
Hello, thanks for the answer and the download.
I've tried the same way. I still downloaded your file and tried as you described.
Unfortunately I got the same error NPRG Error 5002 again.
Unfortunately I have no idea where the problem could be.
I found out that it could be a memory error.
As if a flash process had failed and there is no longer a correct series of partitions.
So I would need a complete original rom and would have to flash it via fastboot.
I could also try it via twrp, but I don't get this flashed.
And I don't have a complete original rom either.
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Hm.. said:
Hello,
So I have now been able to flash the phone with another PC with Sugar QCT after it suddenly started up after the battery was completely empty and I charged it again.
But unfortunately the boot problem persists after turning off the phone again.
Even after replacing the battery with a new one.
Then I tried to flash TWRP via the Alcatel Flasher.
The flash process was successful but there was no TWRP on it after the reboot.
So the problem could still be somewhere else than just the firmware.
Click to expand...
Click to collapse
Hello, it may be that you are making the same mistake that I made when installing recoveri. When selecting the recovery, note that the twr is the one that weighs about 14 mb and the original one about 24 mb. I think that when you make a copy with the recovery program and then install the twr you select it wrong. In the program, do not make the copy of the recovery, skip that step and go directly to install and select the 14 mb file. You will see that this is the problem. Cheers
Hi guys,
I think I have bricked my phone definetley. I did a couple of bad things. First I disconneted the usb cable while flashing with Odine, then, worse I closed odin and the phone went into emergency recovery mode. I tryed to use Smart Swithc to revoer it but it daoes not connect with th W10 Pc. The only thing I can do is to switch off using power and volume down but then it restart atutomatically and shws the emergency recovery screen. I have tryed all te uttons combinations found on the web, but the stubborn piece od hardware does not hear me, Is there someone that cne help me? I am close to use a hammer...
Hey there, when the phone is in emergency recovery mode, does it show up in Odin? If yes, you can try flashing the firmware again. It should work.
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
enzo-ita said:
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
Click to expand...
Click to collapse
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
RVR said:
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
enzo-ita said:
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
Click to expand...
Click to collapse
Happy to hear that!