need ubdate please
ubdated
View attachment MTCE_MX2_V3.00-20190516T203643Z-001.zip works great
Related
Moin moin
I just noticed (and saw on wiki) that our ace has 384MB RAM and 512MB "ROM"
i put togetzer the numbers i had: system + data + cache = always around 400MB. What is the rest used for? i mean 100MB are 100MB if you know what i mean.
same with RAM. is it used by some kind of ramdisk or what is it used for? cuz we just have ~276MB. Also more than 100MB going "nowhere"
I read somewhere that some ram is used for GPU. true?
Thanks in advance and wish a nice sunday
CJCord said:
Moin moin
I just noticed (and saw on wiki) that our ace has 384MB RAM and 512MB "ROM"
i put togetzer the numbers i had: system + data + cache = always around 400MB. What is the rest used for? i mean 100MB are 100MB if you know what i mean.
same with RAM. is it used by some kind of ramdisk or what is it used for? cuz we just have ~276MB. Also more than 100MB going "nowhere"
I read somewhere that some ram is used for GPU. true?
Thanks in advance and wish a nice sunday
Click to expand...
Click to collapse
Ace has 512MB ram..almost a half of it is used up by the system
I got transformed into a potato while writing this post..
CJCord said:
I just noticed (and saw on wiki) that our ace has 384MB RAM and 512MB "ROM"
i put togetzer the numbers i had: system + data + cache = always around 400MB. What is the rest used for? i mean 100MB are 100MB if you know what i mean
Click to expand...
Click to collapse
There's system, data, cache, boot, binaries, a lot of partitions (including efs), the device's hardware controllers, etc. That's where 512 MB run off to.
Prawesome said:
Ace has 512MB ram..almost a half of it is used up by the system
I got transformed into a potato while writing this post..
Click to expand...
Click to collapse
*384 MB
Ace have 330MB RAM - when the kernel boots they is an info about it in dmesg, but only ~280MB is alivbe for the user, other is reversed for the GPU (mostly), audio processing and etc.
Wysyłane z mojego ASUS Transformer Pad TF300T za pomocą Tapatalk
Memory of ACE
In my opinion you don't be worrie with the Mb Ram it's appear or not. be worrie with ROM,
The ROM is like an HD, and like you now the system android it's based on Linux, so like every system linux you have on less 3 partitions, and 1 of them have a type Swapp. and if this partition be small if the Ace don't have Mb Ram, he go to the partition Swapp use the Mb that's in fault.
So see the differences.
Ram 330+ Rom 512 or
Ram 330 + Rom (1st partition 250+ 2nd partition 150 + Swap 100)
Ram 330 + Rom (1st partition 350+ 2nd partition 150 + Swap 12)
and don't forget you have the micro SD with memory extra.
in my point of view this option is the best Ram 330 + Rom (1st partition 250+ 2nd partition 150 + Swap 100) because you have more memory to complement at RAM.
can i install 512mb gta version on my lumia 925 which is 1gb ram inside. i wana see how is fps better or same.
and if yes , how can i do it please? thank you.
i installed normal gta sa 1gb version ...
and i try download "Optimized for 512mb ram" version but same this .. even app size is same 19mb.
from here
Mod Edit: link removed. Please do not link to places where people can download paid apps for free...Thanks!
thanks guys
As you know all the apps are getting bigger and bigger and Xperia so with it's poor memory of can't handle all of the apps.
Recently I have some bad time with the ram memory (see the attachment)
I read about an app called "ROEHSOFT RAM Expander (SWAP)" it's paid app that use partition from sdcard on ram and it needs a kernal that support swap.
Does anyone tried that app ??
Is there any chance of a hardbrick??
Device : C5303
ROM : Official CM13
Kernal: helium v24.
Thanks in advance
I don't recommend, this will brick your sd card more soon than natural time
n78 shadow said:
As you know all the apps are getting bigger and bigger and Xperia so with it's poor memory of can't handle all of the apps.
Recently I have some bad time with the ram memory (see the attachment)
I read about an app called "ROEHSOFT RAM Expander (SWAP)" it's paid app that use partition from sdcard on ram and it needs a kernal that support swap.
Does anyone tried that app ??
Is there any chance of a hardbrick??
Device : C5303
ROM : Official CM13
Kernal: helium v24.
Thanks in advance
Click to expand...
Click to collapse
No you won't get hardbricked but you'd be doing yourself a deservice as the act of using SWAP is CPU intensive and will degrade your SD Card to a large extent due to many r/w operations that are required.
Hello friends , can someone port Multirom app for sprout 4 and 8 please reply
keerten said:
Hello friends , can someone port Multirom app for sprout 4 and 8 please reply
Click to expand...
Click to collapse
it is already ported.... have a look here http://forum.xda-developers.com/cro...ualboot-dualbootpatcher-simpler-dual-t3297414
Don't follow the snapshot right there . It has bugs . follow this instead . You can install on sd card also .
DarkHeart Z said:
Don't follow the snapshot right there . It has bugs . follow this instead . You can install on sd card also .
Click to expand...
Click to collapse
How much space required for installing rom on sd and what about the speed of the rom installed on sd
mithunpk said:
How much space required for installing rom on sd and what about the speed of the rom installed on sd
Click to expand...
Click to collapse
class 10 sd card is recommended . Uhs-1 is perfect and our android one device system partition weighs 1000mb so that much space is required . the more powerful the sd card is ; the much better performance you get .
Hello everyone
I'd like to know if it is possible to switch this post from Android version 6 to 8 without SD card because I only have USB ports on it.
Or if I can leave it in Android 6 and put an alternative rom, still without SD card.
thank you so much
- Model : A-MEDIA AUTO (1024X600 S)
- Android 6.0.1
- CPU 8 core 64-bit CPU Coretex-A53 @ 1.5G
- Noyau 3.10.0 [email protected]#1285
- MCU MTCE_KLD_V2.88b_1
corsica06 said:
Hello everyone
I'd like to know if it is possible to switch this post from Android version 6 to 8 without SD card because I only have USB ports on it.
Or if I can leave it in Android 6 and put an alternative rom, still without SD card.
thank you so much
- Model : A-MEDIA AUTO (1024X600 S)
- Android 6.0.1
- CPU 8 core 64-bit CPU Coretex-A53 @ 1.5G
- Noyau 3.10.0 [email protected]#1285
- MCU MTCE_KLD_V2.88b_1
Click to expand...
Click to collapse
Yes, although you may have missed the multiple threads and much discussion on this topic, being this has been posted in the MTC*B* thread.
corsica06 said:
Hello everyone
I'd like to know if it is possible to switch this post from Android version 6 to 8 without SD card because I only have USB ports on it.
Or if I can leave it in Android 6 and put an alternative rom, still without SD card.
thank you so much
- Model : A-MEDIA AUTO (1024X600 S)
- Android 6.0.1
- CPU 8 core 64-bit CPU Coretex-A53 @ 1.5G
- Noyau 3.10.0 [email protected]#1285
- MCU MTCE_KLD_V2.88b_1
Click to expand...
Click to collapse
Now there is a easy way to upgrade.
http://hal9k.ru/?page_id=207
Ati_gangster said:
Now there is a easy way to upgrade.
http://hal9k.ru/?page_id=207
Click to expand...
Click to collapse
Thank you
It's a paid application, that's good