Just a heads up ,had the same problem of double tap to wake not working and any other screen off gestures. after few hours of fiddling came to know it has something do with the proximity sensor not being properly calibrated. Once I calibrated the sensor the issue was fixed for me ,sharing it in the interest so that it works for others too.
1. Enter engineering mode by entering *#808# on the dialer.
2.goto device debugging tab and select proximity sensor test
3. Make sure nothing covers your phone on top as instructed and tap the offset calibrate button multiple time until you see the text "pass" on screen.
4. That is all, now the double tap to wake should work along with other offscreen gestures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GM1911 using Tapatalk
Doesn't work on my phone
slonn said:
Doesn't work on my phone
Click to expand...
Click to collapse
did you get the pass text after pressing "offset calibrate button" multiple times?
Yes
Should we put something at 2cm and then 4cm away from the phone when doing this calibration? It doesn't seem like we are calibrating if we just have the sensor pointing straight up at nothing? I have gone to the menu page for proximity calibration, but have not hit the offset calibrate button yet.
worked for me. Thx!
I didn't really locate the exact "offset calibrate button", but after simply hitting on a few of the options in that device debugging tab I got it up and running again. Thanks.
slonn said:
Doesn't work on my phone
Click to expand...
Click to collapse
mtucker said:
Should we put something at 2cm and then 4cm away from the phone when doing this calibration? It doesn't seem like we are calibrating if we just have the sensor pointing straight up at nothing? I have gone to the menu page for proximity calibration, but have not hit the offset calibrate button yet.
Click to expand...
Click to collapse
So the above worked for me, however, I clicked the calibration button one time and when it asked for me to put something 2cm/4cm away from the sensor, I used the back swipe gesture and left the calibration settings. Once I did that, my draw O for flashlight, tap to wake, notifications and ambient sensor started working again.
dynamikd said:
So the above worked for me, however, I clicked the calibration button one time and when it asked for me to put something 2cm/4cm away from the sensor, I used the back swipe gesture and left the calibration settings. Once I did that, my draw O for flashlight, tap to wake, notifications and ambient sensor started working again.
Click to expand...
Click to collapse
Thanks for the feedback. So it does ask to put something a 2cm/4cm away. That makes sense. I never did try it. I did settings/apps/show all apps/ show system apps/ambient display/ I cleared the cache and then restarted the phone. After that all was good and it kept working. That was a few days ago before the OTA update came down.
Delete. Wrong forum.
bala_gamer said:
Just a heads up ,had the same problem of double tap to wake not working and any other screen off gestures. after few hours of fiddling came to know it has something do with the proximity sensor not being properly calibrated. Once I calibrated the sensor the issue was fixed for me ,sharing it in the interest so that it works for others too.
1. Enter engineering mode by entering *#808# on the dialer.
2.goto device debugging tab and select proximity sensor test
3. Make sure nothing covers your phone on top as instructed and tap the offset calibrate button multiple time until you see the text "pass" on screen.
4. That is all, now the double tap to wake should work along with other offscreen gestures
Click to expand...
Click to collapse
Step 2b: select infrared proximity calibration
Step 3b: follow instructions to place a planar object (my hand) at 2cm and then 4cm away from the top of the screen.
But it worked! Thanks OP
Doesn't work on mine either. However the only gesture that doesn't work is double tap, thankfully when I lift it now that works again.
mtucker said:
Thanks for the feedback. So it does ask to put something a 2cm/4cm away. That makes sense. I never did try it. I did settings/apps/show all apps/ show system apps/ambient display/ I cleared the cache and then restarted the phone. After that all was good and it kept working. That was a few days ago before the OTA update came down.
Click to expand...
Click to collapse
Hopefully you will continue to be good from here on out! I have had zero problems with this device and started to love it again. Now my only pain point are the T-Mobile updates. Still waiting for the camera one to make its way to me and I am tentative about receiving future updates.
---------- Post added at 03:39 PM ---------- Previous post was at 03:38 PM ----------
chefster74 said:
Doesn't work on mine either. However the only gesture that doesn't work is double tap, thankfully when I lift it now that works again.
Click to expand...
Click to collapse
So you went into engineering mode and your double tap is still unresponsive?
dynamikd said:
Hopefully you will continue to be good from here on out! I have had zero problems with this device and started to love it again. Now my only pain point are the T-Mobile updates. Still waiting for the camera one to make its way to me and I am tentative about receiving future updates.
---------- Post added at 03:39 PM ---------- Previous post was at 03:38 PM ----------
So you went into engineering mode and your double tap is still unresponsive?
Click to expand...
Click to collapse
Yes, however it's working now. I can put up with little bugs as long as they are eventually fixed. The only thing I don't like is showing somebody my nice new phone and having something not work ??
For those people who have this issue still, Oneplus afiirmed to have fixed/ improve DTTW and will release a stable OTA soon including other fixes
GUGUITOMTG4 said:
For those people who have this issue still, Oneplus afiirmed to have fixed/ improve DTTW and will release a stable OTA soon including other fixes
Click to expand...
Click to collapse
Thank you very much, that is exactly what I'm waiting for ?
chefster74 said:
Thank you very much, that is exactly what I'm waiting for ?
Click to expand...
Click to collapse
Yup, Im also very interested in the popup camera fix. we dont want that camera trying to open with the phone upsidedown in the pocket
GUGUITOMTG4 said:
Yup, Im also very interested in the popup camera fix. we dont want that camera trying to open with the phone upsidedown in the pocket
Click to expand...
Click to collapse
So far I haven't had any problems with my pop up camera and hope I don't.
chefster74 said:
Doesn't work on mine either. However the only gesture that doesn't work is double tap, thankfully when I lift it now that works again.
Click to expand...
Click to collapse
turn off single tap show then double tap should be works fine
i ran into this problem again this morning in low light after calibrating the proximity sensor and receiving the update that supposedly fixed the problem. will performing a factory reset restore whatever changes i made in the engineering mode?
Related
v1.4 now in the market!
Acts as a proximity sensor during calls using the built in light meter.
You can test outside of a call by launching the application from the normal application menu, just remember to close it again by pressing back while the screen is locked!
Thanks to: mabalito and maejrep for help with getting the sensor to work!
CDMA Hero users: Autobacklight must be enabled or the sensor does not work, a fix is being worked on!
Enjoy, please post bugs/comments!
Version 1.4
* Force close and other bug fixes
Version 1.3
* Speed boost
* Force close and other bug fixes
Version 1.2
* Added a adjustable threshold at which the application locks the screen
* Added a configuration utility
* Fixed some more bugs
Version 1.1
* Added option to automatically disable when a bluetooth headset being used
* Added option to automatically disable when speakerphone is enabled
* Volume adjustment now works when screen is locked
* Bug fixes
*Better error handling
Download:
Search the market for "Proximity Sensor
OR
Download here
OR
Scan the QR code:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please consider donating by downloading the donate version from the Market
good find. have you tried it in-call yet? let us know if it works.
I made it so I hope it works! lol
I've been waiting for this! Thank you!
great app, great story
it works just great. this is so cool to see how a good idea is investigated and evolved by the community, then a smart programmer whoops it into an application which is then available worldwide, and in this case even for free (thanks for that!)!
read the full story.
lazy people go here for barcode scanner code.
Hello, this is a great idea!
Is it possible if you could auto-disable the app when the light sensor is already reading no light (so it doesn't go into lock mode straight away once about to ring someone at night) and also, why does the screen stay on? That surely will drain battery life. Can't you make it so that the screen turns off when its dark and back on when not?
Thanks
great app. very much needed
This is a really great app, thanks for making it!
The reason the screen stays on is that the light sensor stops reporting light values when the screen is turned off. Maybe this could be worked-around by modifying the Linux kernel but that would surely complicate things..
Anyway, maybe propose this app for inclusion into the next version of MCR?
note: you need to uninstall the version from this forum if you want to install the market version. looks like someone got himself a brandnew set of keys for the market release
Lol yeah lost the old set!
tomfreay said:
I made it so I hope it works! lol
Click to expand...
Click to collapse
oh man! lol i'm sorry.. i didn't notice the "please post bugs/comments" part in the original post. haha!
my bad
sorry but i don't understand very well the purpose of this apps
by now (without this apps), when i'm using my hero (calling or receiving a call) the screen turns off and i need to use the left phone button if i need the keyboard.
So what does the apps do exactly ?
Thanks
Its locks the screen when you bring the phone against your ear and unlocks it (goes back to normal phone screen) when you move it away.
Only problem I have is that it always locks it in a semi light room, is there a way to change the sensitivty? otherwise its a great app
kien said:
Its locks the screen when you bring the phone against your ear and unlocks it (goes back to normal phone screen) when you move it away.
Only problem I have is that it always locks it in a semi light room, is there a way to change the sensitivty? otherwise its a great app
Click to expand...
Click to collapse
I agree with the above, It's a great app, however it seems to get enabled in a room with little light, which is a bit annoying. A calibration option would be good?
Also, what is the extra strain on the batter when it's being used i.e. I'm sure it's fine for short phone calls, but when on longer ones does it drain the battery more than when just making a call?
first, the screen should only get locked in a dark room (lol ) when a call is active. if it is triggered by itself then you are running the app in test mode. you do NOT need to start the app manually, it is started when a call is placed or received.
if you want to deactivate it (i.e. for longer calls) just press back during the call. if the screen is not locked at that moment just cover the light sensor with your finger. pressing back disables the app, and after a few seconds the screen will time out as usual and will then be switched off.
kendong2 said:
first, the screen should only get locked in a dark room (lol ) when a call is active. if it is triggered by itself then you are running the app in test mode. you do NOT need to start the app manually, it is started when a call is placed or received.
if you want to deactivate it (i.e. for longer calls) just press back during the call. if the screen is not locked at that moment just cover the light sensor with your finger. pressing back disables the app, and after a few seconds the screen will time out as usual and will then be switched off.
Click to expand...
Click to collapse
Thanks for the advice....
However the app definitely gets activated when using it in semi-light filled spaces. It's not dark just not too light, a slight tweek to only activate it when it's pitch black would be nice!
The problem is with the hardware not the app, sadly HTC put a rubbish sensor in (but at least they put one in at all!)
This means that the sensor reads 0 even in a semi-bright room. You can try things like pointing the sensor (top left, looks like an LED) towards the light source and making sure you shadow isn't covering the sensor.
Not ideal I know but there isn't anything I can do about it!
I am looking to add g-sensor support and perhaps a few other tweaks but that will be version 2.0, got some bugs to iron out first, and a degree to finish lol!
Is there a way to set the brightness of the screen to 0 when the app is active, and set the brightness back to the original setting when inactive?
On the gsm hero yes, because the app works regardless of the autobacklight settings, however on the CDMA version it only works with autobacklight enabled, something I'm trying to get around.
So it might not happen for a while sorry
This is such an useful and awesome app! Its not perfect, but its still a great use of the light sensor!
as u can see there is a little circle i dont know what is that , sometime shows up and sometime disappear. Can touch through , help me get rid of this~~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using XDA Free mobile app
It is a hotkey you link it to the program you want. I have mine linked to greenify to put all the app to sleep and turn off the screen
Sent from my Benzo'd Google N6 on VZ
no it shows by itself , i didnt touch it, how can i stop that
Sent from my Nexus 6
Davesssssss said:
no it shows by itself , i didnt touch it, how can i stop that
Sent from my Nexus 6
Click to expand...
Click to collapse
Factory reset? I have been on quite a few versions of lollipop and custom ROMs I've never seen the black circle stay for longer than I've touched it.
Sent from my Benzo'd Google N6 on VZ
Aliens have landed inside your phone. Call the men in black (if the aliens haven't already blocked your calls)
DebianDog said:
It is a hotkey you link it to the program you want. I have mine linked to greenify to put all the app to sleep and turn off the screen
Click to expand...
Click to collapse
I've never heard of this hotkey capability before - is this available on stock 5.1?
- ooofest
I would assume its under accessibility
ooofest said:
I've never heard of this hotkey capability before - is this available on stock 5.1?
- ooofest
Click to expand...
Click to collapse
I am pretty sure it is it might be in the settings somewhere I forget. Just hold the Center control and drag up
Sent from my Benzo'd Google N6 on VZ
DebianDog said:
I am pretty sure it is it might be in the settings somewhere I forget. Just hold the Center control and drag up
Click to expand...
Click to collapse
Oh, you mean the home button shortcut gesture - thanks, I hadn't heard that referred to as a hotkey before.
Still, on my stock 5.1 phone that gesture shows as a temporary white circle as long as my finger is still pressed down on the home button (waiting for me to drag upwards and get the shortcut list) - not sure why the OP would be seeing a grey circle or why it's remaining on the screen, aside from a bug.
- ooofest
ooofest said:
Oh, you mean the home button shortcut gesture - thanks, I hadn't heard that referred to as a hotkey before.
Still, on my stock 5.1 phone that gesture shows as a temporary white circle as long as my finger is still pressed down on the home button (waiting for me to drag upwards and get the shortcut list) - not sure why the OP would be seeing a grey circle or why it's remaining on the screen, aside from a bug.
- ooofest
Click to expand...
Click to collapse
Look here:
http://m.androidcentral.com/whats-n...small-changes-updated-lollipop-release#slide7
On the 6th page, under other small fixes. Could this be the culprit?
Evolution_Freak said:
Look here:
http://m.androidcentral.com/whats-n...small-changes-updated-lollipop-release#slide7
On the 6th page, under other small fixes. Could this be the culprit?
Click to expand...
Click to collapse
The "Sticky Soft Keys," do you mean? I thought that was highlights around the soft keys, but could be wrong.
Thinking about it, that home button shortcut seems dedicated to Google Now in Lollipop (i.e., I was used to it being configurable in TouchWiz) - I tried disabling Google Now as an experiment, but holding your finger down on the Home button still brings up the white circle overlay.
It's almost as if that overlay is staying resident for the OP after possibly being triggered (as a guess) - even though it's inexplicably grey on his phone - so, I wonder if holding down the Home soft key for a few seconds and then letting go might make it go away.
@Davesssssss : if you hold down the Home soft key, does a different circle overlay appear? If not, can you swipe up and get a prompt for opening the Google Now cards? Going back to a home screen, is the grey circle still there?
This is all just testing to determine if that circle is related to the Home button, but thought it might be interesting to try.
- ooofest
Hey I returned my last nexus 6 and get the new one, updated to 5.1 , same thing happen again, OMG , is something has conflict with 5.1 or this is a bug
Sent from my Nexus 6
I tried all method , it sometime shows and sometime disappears
Sent from my Nexus 6
Davesssssss said:
I tried all method , it sometime shows and sometime disappears
Sent from my Nexus 6
Click to expand...
Click to collapse
Out of curiosity, did. you try the tests I suggested earlier? I am curious if this is at all related to the home key and maybe another app you happen to have installed.
- ooofest
I tried your method but it will comes out later on again
Sent from my Nexus 6
I deleted my all google accounts, and then it doesn't come out any more! But I need my accounts , it's a bug I think.
Sent from my Nexus 6
Davesssssss said:
I tried your method but it will comes out later on again
Sent from my Nexus 6
Click to expand...
Click to collapse
So, you hold the Home button and swipe up, then it goes away temporarily? But, it shows. up again how. much later, please?
Are you on stock 5.1 with no root and locked bootloader?
I'm still leaning towards an app that is somehow colluding with the Google Now launcher via Home button but that's probably do to my lack of knowledge, most likely.
- ooofest
Finally I found out the reason, no root and locked boot , is my Carrier problem , when I took the Sim out ,it never shows again
Sent from my Nexus 6
Davesssssss said:
Finally I found out the reason, no root and locked boot , is my Carrier problem , when I took the Sim out ,it never shows again
Sent from my Nexus 6
Click to expand...
Click to collapse
Interesting, though that seems an unworkable solution, since you need the carrier SIM for phone functionality.
The phone was activated and working correctly with your carrier for calls, texts, data?
- ooofest
Yes and fully works, just that gray circle sometime shows , I will wait till next update and see if it will be fixed. But thanks man
Sent from my Nexus 6
First let me apologize if this is not the correct location on the forum to post this. I by am no means looking to bash the phone just had some questions that maybe some people may be able to help me with. I understand this is not Touchwiz so it is different, and these are very minor issues nothing that I could not learn to adjust to.
1) Notification drop down. Though I do like the "gesture" style notification drop down. Before I could use the finger print scanner to drop down to notification tab is there another shortcut way to make this happen similar to the finger print way on the S8+? I may be able to do in in Nova but will need to mess with it to figure it out.
2) Brightness bar. Does anyone know how to get the brightness bar to possible show up in the notification without it being pulled down all the way?
3) Home button. I can't seem to find a way to press the home button when in a full screen game app. Meaning prior I was able to press the location and then it would still work. Now I have to swipe up to show the nav bar and then press it.
4)LTE+ This is one isn't a complaint just a question about since I got the unlocked instead of Verizon it shows LTE+ vs 4G doing a quick search it seems to be ok just wanted some clarification.
Other then those few things I noticed over all I am happy the phone is a lot quick and better then my previous. Though at the same time nothing super new to really "wow" me I was already more then happy with the S8+ and the S10+ is a very good evolution. The hole punch is really not as bad as some others may have feared. The finger print does take a little time to get used to but seems to work about 85% success mostly do to slightly off placement. Having the extra cameras is great and so far a nice upgrade from my S8+. Again not really complaining but maybe there is toggle that I may have missed that could have fixed my little issues.
1. Use the swipe down gesture in nova launcher to pull it down, not as nice as FP sensor gesture i know :/
2. You can do this by checking the setting for 'Show Control on Top' when you expand the brightness control
3. If you are using the gestures for navigation you would swipe from where the home button would be if it were held in portrait, so typically on the right when gaming. just play with it.
4LAN9 said:
1. Use the swipe down gesture in nova launcher to pull it down, not as nice as FP sensor gesture i know :/
2. You can do this by checking the setting for 'Show Control on Top' when you expand the brightness control
3. If you are using the gestures for navigation you would swipe from where the home button would be if it were held in portrait, so typically on the right when gaming. just play with it.
Click to expand...
Click to collapse
Thanks, I actually used an an BX actions to remap the button on my S8+ decided to pay for the full feature and now I mapped it to drop down notifications so thats all set. Thanks found the control option by clicking on the arrow. As for my third the more I use both pbones it might be good to swipe up for the buttom. No more accidental presses when in full screen. So it looks like the phones grade is moving up ?. Thanks for the reply.
Pull down the notification all the way. Next to the brightness bar you will see a little down arrow, press that and there it is.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G975U1 using Tapatalk
Settings/ display/ home screen/ select quick open notification panel, and you can swipe down anywhere on the screen. I have the 10e and the fingerprint gesture still works [emoji16]
Sent from my SM-G970U1 using Tapatalk
email notifications
Another tiny issue. Using Nova and Teslaunread, though not getting any email notifications anyne else seeing the same things.
bricky23 said:
Settings/ display/ home screen/ select quick open notification panel, and you can swipe down anywhere on the screen. I have the 10e and the fingerprint gesture still works [emoji16]
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
Oh, this is good to know. This is one of the reasons I switch launchers. I'm so used to swipe up anywhere for apps and down anywhere for notifications. This is even more natural to me than the fingerprint reader swipe, but of course the fingerprint reader let you do it in any app which is a big difference.
As for #4 since no one answered, the unlocked version is just being more specific. The US carriers usually replace the specific technology type (LTE, LTE+, etc) with generic "4G" branding (or 5GE if you're a jackass).
I just paid for full BXActions and I was able to remap bixby to double tap to drop the notification. Before I was happy with the free version but deff worth the extra few bucks. I can map more tap types.
cflip2x said:
Another tiny issue. Using Nova and Teslaunread, though not getting any email notifications anyne else seeing the same things.
Click to expand...
Click to collapse
check settings in nova, it is possible,
you need to allow notifications for gmail etc
johnny8910 said:
check settings in nova, it is possible,
you need to allow notifications for gmail etc
Click to expand...
Click to collapse
Tried a few things but not the worst preamblem. Another issue I wish they could fix is vibrate when the thumbprint is accepted vs vibrate when you miss. Ehhh just little complaints. ?* getting more comfort with the phone, though at the same time curious to see the folding Razer
cflip2x said:
Another tiny issue. Using Nova and Teslaunread, though not getting any email notifications anyne else seeing the same things.
Click to expand...
Click to collapse
I've stopped using Nova because of this, since Pie Tesla Unread is very inconsistent, if they ever sort it I will go back
Sent from my SM-G975F using Tapatalk
cflip2x said:
I just paid for full BXActions and I was able to remap bixby to double tap to drop the notification. Before I was happy with the free version but deff worth the extra few bucks. I can map more tap types.
Click to expand...
Click to collapse
I just followed your lead cflip2x and paid for the full version of BXActions and it's (obviously) ideal for this phone. Struggling to attach a single tap action to the bixby button though since whatever I try only seems to activate on a double tap. I need to find the right forum to discuss that issue but it's a great app.
cflip2x said:
Another tiny issue. Using Nova and Teslaunread, though not getting any email notifications anyne else seeing the same things.
Click to expand...
Click to collapse
In Nova Beta 6.1 you don't need Tesla anymore, there is an option in the notification which uses the default Pie notification (numbered) system. Starting tomorrow Tesla won't be available on Playstore due to Google new restrictions.
Guys, silly question. Do we have any notification LEDs? Can't find it. Please help. Hahaha.
I use this : Always on Edge
Watch some youtube videos on it if you feel its a little complicated or overwhelming but once you get used to it, it's really easy. Works great. Make sure to set it to manual in Huawei's app launch section so that it can run constantly.
Problem with that is that I first have to tap the apps overlay away before I can fingerprint unlock my device, is there a setting so it works at once as before?
nurps said:
Problem with that is that I first have to tap the apps overlay away before I can fingerprint unlock my device, is there a setting so it works at once as before?
Click to expand...
Click to collapse
You can set double tap. Also you only need to do it when the notification is on.
JJay666 said:
I use this :
Watch some youtube videos on it if you feel its a little complicated or overwhelming but once you get used to it, it's really easy. Works great. Make sure to set it to manual in Huawei's app launch section so that it can run constantly.
Click to expand...
Click to collapse
What about battery life? Does it drains a lot?
And can you set it up edge lighting to repeat every minute or so until you read or dismiss notification?
Sorry for my bad English
repa21 said:
What about battery life? Does it drains a lot?
And can you set it up edge lighting to repeat every minute or so until you read or dismiss notification?
Sorry for my bad English
Click to expand...
Click to collapse
My personal experience, there's hardly any drain. I set it to turn off at 12am and turn back on at 7am. Sometimes i see 1% , sometimes i dont even see it in the usage tab. Maybe because i don't have many incoming messages but hye, it's really battery friendly.
Yes, you can set repeat, max 2 minutes. So every too minutes it will remind you.
Check the settings of the apps, there's plenty of control.
Also make sure to turn off automatic power management for that app else the p30 pro will put it to sleep.
I'm not able to use it anyway. I use NoLED fron XDA and it works well.
JJay666 said:
My personal experience, there's hardly any drain. I set it to turn off at 12am and turn back on at 7am. Sometimes i see 1% , sometimes i dont even see it in the usage tab. Maybe because i don't have many incoming messages but hye, it's really battery friendly.
Yes, you can set repeat, max 2 minutes. So every too minutes it will remind you.
Check the settings of the apps, there's plenty of control.
Also make sure to turn off automatic power management for that app else the p30 pro will put it to sleep.
Click to expand...
Click to collapse
The repeat thing doesn't work for me, I don't know why. What about you? Do you have that option turned on or off?
repa21 said:
The repeat thing doesn't work for me, I don't know why. What about you? Do you have that option turned on or off?
Click to expand...
Click to collapse
It's working fine, make sure in Battery - App launch - turn off manage automatically for the always on edge app.
deus_ex_yue said:
I'm not able to use it anyway. I use NoLED fron XDA and it works well.
Click to expand...
Click to collapse
Can you please send me link where I can find apk for noled?!
---------- Post added at 09:43 AM ---------- Previous post was at 09:37 AM ----------
JJay666 said:
It's working fine, make sure in Battery - App launch - turn off manage automatically for the always on edge app.
Click to expand...
Click to collapse
I did... and it works fine, just repeat thing doesn't work (when I receive notification edge light up, after 60 seconds it should light again but it doesn't).
I don't know why, any suggestions?
repa21 said:
I did... and it works fine, just repeat thing doesn't work (when I receive notification edge light up, after 60 seconds it should light again but it doesn't).
I don't know why, any suggestions?
Click to expand...
Click to collapse
Not sure, check your app settings, phone notification access, permission, etc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NoLed app can be obtained via apkmirror but development for it has be halted. Also to dismiss the notification, you'd need to swipe up. Would have been nice if they added double tap to dismiss or something similar.
JJay666 said:
Not sure, check your app settings, phone notification access, permission, etc.
NoLed app can be obtained via apkmirror but development for it has be halted. Also to dismiss the notification, you'd need to swipe up. Would have been nice if they added double tap to dismiss or something similar.
Click to expand...
Click to collapse
I am using Nova launcher, maybe that's the problem?! I checked everything and it's set up properly.
repa21 said:
I am using Nova launcher, maybe that's the problem?! I checked everything and it's set up properly.
Click to expand...
Click to collapse
Nah, im using nova too. Works well here.
JJay666 said:
Nah, im using nova too. Works well here.
Click to expand...
Click to collapse
I don't know what's wrong. Guess I'll stick with always on. Shame because I really like app!
I worried me AOE, however, no matter what I set it will not show me.
Can someone help me with the settings?
Can enyboy share good LED notification here? NoLed no longer available on XDA or i can't finde it.
Maybe this should help those with issues
Hey JJay666 Thanks for your quick reply.
I can not select the first option under permission.
Where or what do I have to change?
Ruffy841 said:
Hey JJay666 Thanks for your quick reply.
I can not select the first option under permission.
Where or what do I have to change?
Click to expand...
Click to collapse
It should bring you straight to the permission menu when you click it. If you think you messed something up, then clear data and cache for AOE. Re-launch the app again and do it step by step. Works here on my end without any issue.
The access notification access, enter settings and search Notification Access, then give permission to AOE.
I cant find this Option to aktivate
Hi,
I got my P30 Pro couple of days ago, so far everything is pretty smooth, but one thing really bothers me:
The sensitivity of the bottom right corner; I'm using SwiftKey with no dedicated emoji key (=you have to long press the enter key), and 3 times out of 4 it doesn't take the long press.
And my long press duration is 200ms...
Anyone having the same issue??
I think the corners are less sensitive by default to prevent accidental touches. Due to it having a curved screen, it's easy to activate app icons on the bottom left and right with your palm. On my s10 plus, i always accidentally launch apps which are situated in the bottom right. Never had this issue on the p30 pro so i guess it's better this way.
booster33 said:
Hi,
I got my P30 Pro couple of days ago, so far everything is pretty smooth, but one thing really bothers me:
The sensitivity of the bottom right corner; I'm using SwiftKey with no dedicated emoji key (=you have to long press the enter key), and 3 times out of 4 it doesn't take the long press.
And my long press duration is 200ms...
Anyone having the same issue??
Click to expand...
Click to collapse
I have an emoji key on SwiftKey.
Look down to the left of space bar.
Maybe it is due to your theme or setup.
Plus when I type stuff it offers emoji too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Huawei P30 Pro using Tapatalk
https://www.youtube.com/watch?v=yiyjcXWZ3Qo
7:50 I think we all have the same problem I check it I have less sensitivi on bottom center and it works fine when You turn on in "programer mode" show touch and 1 more option to show data about touch when You turn it on touch start work fine. Can You check it ?
I am having screen sensitivity issues in general with this phone, i am finding i am having to press the home button a few times for it to register sometimes and also when i unlock the phone when i have notifications, i am sometimes having to press the notifications a few times before they open also.
I am using still on firmware .124 so not sure if when i get an update if it will fix that?
james_lpool said:
I am having screen sensitivity issues in general with this phone, i am finding i am having to press the home button a few times for it to register sometimes and also when i unlock the phone when i have notifications, i am sometimes having to press the notifications a few times before they open also.
I am using still on firmware .124 so not sure if when i get an update if it will fix that?
Click to expand...
Click to collapse
I'm on 153 and it's not better
screen sensitivity on my P30 pro is great, even with the tempered glass on.
booster33 said:
Hi,
I got my P30 Pro couple of days ago, so far everything is pretty smooth, but one thing really bothers me:
The sensitivity of the bottom right corner; I'm using SwiftKey with no dedicated emoji key (=you have to long press the enter key), and 3 times out of 4 it doesn't take the long press.
And my long press duration is 200ms...
Anyone having the same issue??
Click to expand...
Click to collapse
I posted a similar topic, but got no response. Mine seems to be unresponsive on the bottom left part.
https://forum.xda-developers.com/huawei-p30-pro/help/unresponsive-parts-screen-t3929066
shaunydub said:
I have an emoji key on SwiftKey.
Look down to the left of space bar.
Maybe it is due to your theme or setup.
Plus when I type stuff it offers emoji too. View attachment 4756421
Sent from my Huawei P30 Pro using Tapatalk
Click to expand...
Click to collapse
Hi Shaunydub,
Thank you, It's indeed the way i set up my keyboard, but it's done on purpose, I've always used SwiftKey like this and I'm used to it.
But I guess, I will eventually have to switch to the dedicated key...
As far as Emoji suggestions, it's a different option, I have that too
WM_Rizzo said:
I posted a similar topic, but got no response. Mine seems to be unresponsive on the bottom left part.
https://forum.xda-developers.com/huawei-p30-pro/help/unresponsive-parts-screen-t3929066
Click to expand...
Click to collapse
I didn't notice it on the left side as the only long press I'm using is on the right side. But I guess it is the same...
I'm pretty sure it's indeed a software prevention for not activating button while holding the device, but yes my question was more does it bother someone else than me?
I don't remember the version I got from the box but yes updating to 153 didn't change anything for that...
booster33 said:
I didn't notice it on the left side as the only long press I'm using is on the right side. But I guess it is the same...
I'm pretty sure it's indeed a software prevention for not activating button while holding the device, but yes my question was more does it bother someone else than me?
I don't remember the version I got from the box but yes updating to 153 didn't change anything for that...
Click to expand...
Click to collapse
It didn't happen before.... started happening roughly around 2-3 weeks ago, and it's the same on 153.
Does it improve if you disable the feature 'Accidental touches' or whatever it's called. It could be worth a try..
/ Magnus
Magnus3D said:
Does it improve if you disable the feature 'Accidental touches' or whatever it's called. It could be worth a try..
/ Magnus
Click to expand...
Click to collapse
If you're talking about "Mistouch prevention", unfortunately it doesn't help as it's only blocking the screen to be turned on when the proximity sensor detects something like when it's in your pocket.