Database Develop

The Phone Goes to Ringing Instead of Vibrating

Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.

TheAvenger said:
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
Click to expand...
Click to collapse
Have you gone to Settings>Phone and set the Ring type to "vibrate and ring"?
You can also use Settings>Sounds & Notifications>Notifications and set "Phone: Incoming call" to "Vibrate and ring"
Hope this helps

Yes, I have all the settings. I change between the "Vibrate" and "Normal" profiles when I am in meetings (vibrate only) or generally (normal, ring + vibrate). The problem is that when I set the vibrate profile, the phone automatically rings sometimes, with sound, which I don't want in a meeting.

reminders?
This problem has just started to appear on my Kaiser. It seems to show up after a reminder appears. I have turned off all sounds and reminders except calendar reminders but vibrate still gets changed to ringing. I have also used Kaiser Tweak to change the defaults.
I don't what triggered this but it seemed to start when I uninstalled FlexMail 4 and then installed Flexmail 2007 but that may be coincidence.
A real problem in meetings or in a hearing where an official can really get upset over a ringing phone.

I still don't have a solution. I don't use FlexMail (any version) so I don't think this is the problem. It could be the calendar but I have not found any connection yet.

Work around
This is by no means perfect but it will prevent embarassing moments. Try recording a "silent" ring tone and using that for your ringer. Then all you miss are phone calls. They, of course, go to voice mail.

I had a similar issue, however it was in reverse, by once choosing the automatic profile in the HTC home.
Basically the automatic feature remains active after selecting it once, so after the reminder, even if it doesn't have time if your next block of time happens to be "free" it will revert it back to ringing.
Unfortunately I never found a solution and now have a new Kaiser, which I have avoided selecting it since getting the phone.

bluetooth too
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]

Ostinato said:
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Click to expand...
Click to collapse
Here is a thread on notifications.
http://forum.xda-developers.com/showthread.php?t=330872

I am now sure that the problem is connected with the calendar. It appears when I make some changes in an event (not always but in about 90% of the cases). I am synchronizing with Outlook and I think the problem appears when I change an event that was already synchronized. By "changing" I mean even dismissing the alarm when it goes off.
Any ideas what I could do?

[Q] Just rooted and am now finding bugs with lockscreen and bluetooth

Just rooted 5 days ago with AOSP baseband version 2.42.02.10.29, Kernel Version 2.6.29.2, Mod version aospMOD 0.9.9.2 and am just finding my phone is bugging out!
OK!
1. The lock screen. Initially to unlock the phone, press on it and slide it to the right. Now, when I press on it, instead of being able to slide it, it jumps around to the left back and forth and is VERY difficult to slide to the right. It acts like it's avoiding me and trying to escape. Took me over a minute to unlock my phone this morning. When I first rooted, it was easy. Now, not so much.
2. Thrilled that I can now voice-dial with my motorola blue-tooth, I am getting the weirdest thing. When my blue tooth is paired and connected, if someone calls, the phone doesn't ring at all, it just rings through the bluetooth (well, the voice notifies me) and I get "call on line one". I have set my contacts for individual ringers so I know who's calling by listening to the song, but now, no ring at all through the phone. Phone is completely silent. If I unplug the bluetooth, the phone rings, but when bluetooth on, no ring. This never happened before. I have triple-checked all the settings and cannot make sense of this. Before, I could have the bluetooth on, and the phone would ring according to the individual ringers.
3. When someone calls and I talk to them through bluetooth, if they hang up and I don't immediately end the call through the bluetooth, my music player leaps into life and starts playing through the blue tooth. Not fun to get a deafening song blasted through your eardrums - this is the music player that was loaded when I rooted, I have again checked all settings and cannot figure out why this happens. So now, if I don't end the call immediately manually, a song starts blasting, and I have to unlock the phone (which is tricky at the moment), open up the music player and manually stop the song and exit out of music player.
My loaded apps are as follows (ones I got from Marketplace):
adobe reader
alarm clock
Astrid tasks
B-Folders
Barcode scanner
convertpad
google sky map
home switcher
latitude
maps (google maps)
memory (game)
Multicon
navigation
news and weather
places
Shootme
Solitaire
Swiftkey
Titanium Backup
Uninstaller
Vizbattery
Wordup! (game that I am absolutely hooked on)
Yelp
Thoughts anyone??????

try a full wipe and reflash the rom/gapps, etc.

Thanks. I might try that if I get desperate, but it's such a hassle, wiping everything and then getting the phone back to the way I like it. As a last resort, sure... but I'll see what happens. Just so you know, suddenly, after not using my phone most of the day, the ring tone suddenly started working, so that with the blue tooth on, the phone's ring tone actually rang - so that's a good thing, even though at the moment, I can't unlock it at all - the unlock button just leaps away from me when I touch it. oh well.

Any progress on it now that a few days have passed?

MOD PLEASE DELETE incoming ring cuts off

I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.

stock at&t lollipop keep making calls and saying call ended on bluetooth

first issue started while connected to vw bluetooth - kept showing call progress , needed to make an actual call in order to stop, now it does it on lg bluetooth as well. while playing music - it starts streaming it in very low quality, then it says call ended and everything goes back to normal. did factory reset - no luck. replaced 3 phones under warranty. same issue. don't notice any pattern. does it at random

more bugs on bluetooth noted - stopped broadcasting song titles to car display. when receiving calls on bluetooth after 2-3 seconds of call switches to headset by itself. did factory reset once more, will be monitoring operation.....

Phone speaker isn't reliable

Hi there,
Not sure if my phone is a dud - has anyone experienced the V40's boombox speaker suddenly not working or else very quiet? I've tried to adjust the volume controls, but it either seems normal, or else it even seems like it's in a call (it says "call volume" when adjusting the volume rocker switches sometimes, even though I'm not in a call). The volume sliders are all full. The only cure is a reboot. But you can still hear screen taps and things too. It's sort of like a media playback issue, and it happens in other apps as well - like Youtube, WhatsApp, etc. It's not going to Bluetooth either...
I have done a factory reset and the problem crept back right away.
Thanks for any help.
Thx
Ken'

kenwchan said:
Hi there,
Not sure if my phone is a dud - has anyone experienced the V40's boombox speaker suddenly not working or else very quiet? I've tried to adjust the volume controls, but it either seems normal, or else it even seems like it's in a call (it says "call volume" when adjusting the volume rocker switches sometimes, even though I'm not in a call). The volume sliders are all full. The only cure is a reboot. But you can still hear screen taps and things too. It's sort of like a media playback issue, and it happens in other apps as well - like Youtube, WhatsApp, etc. It's not going to Bluetooth either...
I have done a factory reset and the problem crept back right away.
Thanks for any help.
Thx
Ken'
Click to expand...
Click to collapse
I am facing a similar issue with "call volume" showing up when headset is connected (even though am not on a call); This specifically happens if my V40 has been previously connected to a Bluetooth device which has a mic, and then has been disconnected from it. I have to restart my V40 everytime this happens as otherwise the audio is really inconsistent (it sounds cracked at lower volume, and tinny at higher volume).
When you say "the problem crept back right away", is it after some particular action (for instance connecting to some BT speaker or something?);
Also, did you try running it in safe mode (hold power button, press the "power off" icon in the screen, it should show an option to re-boot to safe mode), for me, it works on safe mode but the problem comes back even after a factory reset when i am in the normal screen.

BurningFlames said:
I am facing a similar issue with "call volume" showing up when headset is connected (even though am not on a call); This specifically happens if my V40 has been previously connected to a Bluetooth device which has a mic, and then has been disconnected from it. I have to restart my V40 everytime this happens as otherwise the audio is really inconsistent (it sounds cracked at lower volume, and tinny at higher volume).
When you say "the problem crept back right away", is it after some particular action (for instance connecting to some BT speaker or something?);
Also, did you try running it in safe mode (hold power button, press the "power off" icon in the screen, it should show an option to re-boot to safe mode), for me, it works on safe mode but the problem comes back even after a factory reset when i am in the normal screen.
Click to expand...
Click to collapse
Hi there, yeah, I can't exactly pinpoint when the problem crept back after the reset. I had been using Google Maps but I can't imagine how that would affect audio. The next time I used Google Maps, I couldn't here the navigation cues, and then I checked Youtube and "behold!"...the sound had got cut out again. Had to reboot. Would the phone be routing audio to some bluetooth channel or something, like my Samsung Gear S3? Why it would, I don't know. I do remember seeing the "in call" display once when this was happening which clearly is a different bug and not bluetooth related. I did try to connect to a bluetooth device, and then disconnect, and the problem has not resurfaced yet but I feel that I don't have much confidence in it at the moment.
I'll look into Safe mode; thx for the tip.
Ken

I know this has happened to me as well but I know what is causing it on my phone. Whenever taking a video call in Facebook messenger then my phone stays locked in the call volume also. Only way I have found is to restart the phone also. I am not using Bluetooth at all for the call either just the phone speaker so it's not a Bluetooth issue on my end. Having to restart the phone definitely sucks.

rx7boy22 said:
I know this has happened to me as well but I know what is causing it on my phone. Whenever taking a video call in Facebook messenger then my phone stays locked in the call volume also. Only way I have found is to restart the phone also. I am not using Bluetooth at all for the call either just the phone speaker so it's not a Bluetooth issue on my end. Having to restart the phone definitely sucks.
Click to expand...
Click to collapse
Well i found one more case - when doing a FTP through WiFi from PC (to transfer files); once FTP connection is closed (after transferring), and then if the earphones are plugged-in, phone says "call volume". Had to again restart. I was trying to find any app that can just refresh the UI/settings/system without doing a restart every time but haven't been successful. LG definitely need to fix it.

Thx for the replies, I have no clue as to why this problem is happening, but I've traded my phone for a new one in the 10-day purchase period and so far it is working correctly. Fingers crossed.