So, I tried to update to Pie.
I was on Stock Oreo rooted without encryption.
Wiped everything except sdcard, installed Pie and the boot img for encryption fix.
Rebooted to TWRP, flashed the zip from verity fix, flashed latest Magisk.
Rebooted to system, stuck with the dots rotating.
Tried to redo it again, adding the step for the firmware flash.
But when wiping i accidentally wiped sdcard too, so I have no more the required files inside TWRP.
Tried to connect both TWRP and bootloader via adb/fastboot but phone is not recognized.
All the drivers are installed it always worked before (Win7).
Now everytime I try to connect the 3T to PC it says Unknown Device in Device Manager, but all the drivers are installed.
Apparently the phone is not sending its data, because in device properties i see VID & PID = 0000.
Trying to manually attach a driver to it (with right click, update driver) gives error, no driver available for the device (using any adb drivers .inf).
So basically now I'm stuck with a phone without files in it, but with only TWRP working.
How can I send the rom files without adb/fastboot? Any trick?
I also tried to use USB OTG from TWRP but apparently any usb stick is not recognized.
Tried different USB ports and different cables. Seems like a problem with the phone usbC port, not sure.
It's an hard brick at this point?
Just go with the Qualcomm factory restore mode/tools. Turn off phone, hold volume up while connecting phone to PC, install the drivers for the Qualcomm 9008 device and then run the factory recover tool. You can find out all this in the factory restore thread, just make sure you have the 3t and not the normal 3 as they have different firmwares for the hardware.
Skickat från min ONEPLUS A3003 via Tapatalk
Format the device in latest TWRP and reboot it back to TWRP then connect the USB cable to PC. It should ideally recognize your 3t. I never had any issue while recognizing the phone in TWRP menu.
if nothing helps, the final step is obviously try he Qualcomm factory restore mode/tools.
pitrus- said:
Just go with the Qualcomm factory restore mode/tools. Turn off phone, hold volume up while connecting phone to PC, install the drivers for the Qualcomm 9008 device and then run the factory recover tool. You can find out all this in the factory restore thread, just make sure you have the 3t and not the normal 3 as they have different firmwares for the hardware.
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
sandeep_kumar said:
Format the device in latest TWRP and reboot it back to TWRP then connect the USB cable to PC. It should ideally recognize your 3t. I never had any issue while recognizing the phone in TWRP menu.
if nothing helps, the final step is obviously try he Qualcomm factory restore mode/tools.
Click to expand...
Click to collapse
I already tried that too. It always appear as unknown device, even with that method.
Just to be clear, I never had problem before and I already used TWRP mount and fastboot/adb to load files without having a running ROM. I was always able to move file with any of them.
This is different, it seems like an hw problem, the phone it's not sending his IDs when connecting to CP so the PC can't identify what it is even if drivers are installed.
Now, I'm not sure if the problem lies in the physical USBC port or if the failed Pie upgrade ruined somethin in the bootloader or something else.
Then I'd say broken USB cable, have you tried with another cable or a shorter cable?
Skickat från min ONEPLUS A3003 via Tapatalk
pitrus- said:
Then I'd say broken USB cable, have you tried with another cable or a shorter cable?
Skickat från min ONEPLUS A3003 via Tapatalk
Click to expand...
Click to collapse
Tried many cables, ports and PCs.
I also tried to clean the port with a wooden stick without luck.
At this point i believe it's the usbC port or the motherboard.
I think something at the USB MTP level went faulty, because charge works fine (dash charge too).
I just can't transfer files anymore. Not even with an OTG dongle.
Since there is no other way to trasnfer the ROM zip (network is not available inside TWRP) I requested an RMA and tomorrow OnePlus send a carrier to pick it up for repair.
I have not still updated the device. I am on custom ROM. After reading your problem I am scared to install it on my device.
I think it is better to go to stock completely with locked bootloader with 5.0.8 and then accept update. After that, I can unlock the bootloader and root the device.
i just recently had this problem dude, not even 20 mins ago, find and use a diffrent usb cable/port or if u have a usb hub use that along with ur new cable, it finally worked after hours of countless tries
sandeep_kumar said:
I have not still updated the device. I am on custom ROM. After reading your problem I am scared to install it on my device.
I think it is better to go to stock completely with locked bootloader with 5.0.8 and then accept update. After that, I can unlock the bootloader and root the device.
Click to expand...
Click to collapse
Don't worry, if the USB port is working you can always recover. Just be sure your PC recognize the device first, in case anything happens.
cmurder61 said:
i just recently had this problem dude, not even 20 mins ago, find and use a diffrent usb cable/port or if u have a usb hub use that along with ur new cable, it finally worked after hours of countless tries
Click to expand...
Click to collapse
I've been trying for the whole day with 5 different cables, 4 different PC and every usb port of them. I just didn't try with an hub because i don't have one, but i don't think it makes any difference. Anyway the phone i ready to be send for repair now.
if that's ur lat hope, go for it, but the specific cable i used was a belkin usb cable from walmart, u should also update ur adb drivers, if i could id let u use my pc lol
cmurder61 said:
if that's ur lat hope, go for it, but the specific cable i used was a belkin usb cable from walmart, u should also update ur adb drivers, if i could id let u use my pc lol
Click to expand...
Click to collapse
Nah its not the cable or drivers, I test roms every 1/2 months and always been fine with uploading files with adb, fastboot or MTP. Nothing changed. Must be some hardware issue.
Oneplus already sent me the shipment code and i'm waiting for UPS to pick up the package today.
matrixino said:
Nah its not the cable or drivers, I test roms every 1/2 months and always been fine with uploading files with adb, fastboot or MTP. Nothing changed. Must be some hardware issue.
Oneplus already sent me the shipment code and i'm waiting for UPS to pick up the package today.
Click to expand...
Click to collapse
i see, well good luck to ya
Related
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho
Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.
I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!
ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.
i had the same problem before...try changing the rom ...that worked for me
ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
I have the same problem ... :crying:
nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.
Joined the group of USB Brick ....
I recently tried to install PureNexus 7.1.2 along with the latest version of GApps 20170610. There seems to be some sort of conflict with that version of Google Play Services that prevents my device from completing setup. Without completing setup, I'm not able to do anything with the phone.
In an attempt to save myself, I want to go back to the older version of the ROM and GApps that worked, but first they need downloaded. In the past, I could go into TWRP and mount my device to my PC and transfer the files I needed to install. Now, Windows is showing my device as Unknown USB Device (Device Descriptor Request Failed). Going through every thread I could find about updating drivers, etc, it still does not work. This used to work just fine in the past on the same PC (Windows 10).
Both adb and fastboot don't seem to work either. There is no device found. When I boot the phone into Bootloader mode and plug in the USB cable, it shows Transfer Mode: USB Connected but running fastboot on the PC still can't find anything.
I am not sure how else to go about getting the necessary files on the device to flash them.
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
tristanlee85 said:
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
Click to expand...
Click to collapse
It could be just a dirty usb port.
Where's answers
ktmom said:
It could be just a dirty usb port.
Click to expand...
Click to collapse
Unfortunately I do not think that is the case. I have used a number of different means to clean the connection with rubbing alcohol and electrical terminal cleaner, small utensils to get in there and clean the contacts, but no luck. I am to the point now where the phone won't boot up the OS. I can get into TWRP and the Bootloader, but from there I have no way to transfer files to the device.
Bluetooth was my option before, but that is when the device would boot. There's no way to enable BT from recovery right? I am trying to reset the phone back to stock to trade it in to Google, but I am afraid I am going to be out $100 since it seems to be as good as dead now.
So I put this phone away for quite a while, I recently took it out to use with my USB c earpiece from Xiaomi, but it wasn't connecting. So I tried plugging in a USB C Otg thumbdriver, it too did not show up.
I was running Pixel Experience when it had treble support. But given I thought it might be at play for why it's not detected, I wiped and reinstslled miui through TWRP. However after doing that it still didn't work. So I tried to see if TWRP could detect a USB C thumbdriver, it too didn't detect. I resorted to using Mi Flash tool to Flash the stock firmware of Mi Max 2, but still doesn't work.
Anyone know what I could possibly do to get it to work? Thanks
I have a similar issue not same. Similarly my phone stopped detecting usb flash disk on otg. Below is what i did,
To understand if your usb port is malfunctioning, connect your phone to PC and try to communicate through ADB interface. If it goes well than your configuration somewhere deep there sucks (which is my case) or else you have a hardware problem.
kirpi_e said:
I have a similar issue not same. Similarly my phone stopped detecting usb flash disk on otg. Below is what i did,
To understand if your usb port is malfunctioning, connect your phone to PC and try to communicate through ADB interface. If it goes well than your configuration somewhere deep there sucks (which is my case) or else you have a hardware problem.
Click to expand...
Click to collapse
Ah it's okay, I sent it to Xiaomi and got it repaired. Thanks!
kirpi_e said:
I have a similar issue not same. Similarly my phone stopped detecting usb flash disk on otg. Below is what i did,
To understand if your usb port is malfunctioning, connect your phone to PC and try to communicate through ADB interface. If it goes well than your configuration somewhere deep there sucks (which is my case) or else you have a hardware problem.
Click to expand...
Click to collapse
Please advise how did u fix this
Have installed pixel experience oreo rom on mi max 2 and then I noticed org was not working
Please advise
Hi all,
I have OP3T that just not recognized by my PC. I also have another OP3 that connects just fine to this PC. I tried dev menu and USB debug+ MTP, tried to wipe cache, install a new stock ROM downloaded from OP website, also installed the drivers in the PC.
device manager not shown anything when I connect the phone (no MTP device or Android device) and tried several cables and also another PC.
the phone was rooted until the last update (last December) and now I want to install custom ROM and I can't!
I think you want to fastboot flash a recovery?
What OS? Fastboot devices returns null?
yes, so I can install custom ROM eventually. my PC runs win 10 64X and right now my phone has stock android 8.0 (OOS).
what happens that when I connect my phone to the computer there is nothing going on- no now device in device manager and not a new driver pops, so I just can't flash recovery.
is there's an option to flash recovery without using the PC?
Saninisson said:
what happens that when I connect my phone to the computer there is nothing going on- no now device in device manager and not a new driver pops, so I just can't flash recovery.
Click to expand...
Click to collapse
No generic MTP or Android device at all? On either PC, trying different ports (I know you said you tried multiple cables - which is good trouble shooting)? And no pop-up on the phone, allowing you to select MTP (move files, or whatever it says)?
If that I the case, I tend to think the USB port is damaged.
Saninisson said:
is there's an option to flash recovery without using the PC?
Click to expand...
Click to collapse
I've seen some folks package TWRP into a bootloader-flashable zip on other devices, but haven't seen anything like that on the 3T.
More importantly, I'd say it's very risky modding the phone with custom recovery and flashing a ROM, without having fastboot and adb tools available. You can get stuck in a real bad jam doing this, with tools to recover the device. I don't recommend it.
Yes I tried it all but there is no indication besides the device is charging while connected to the USB port.
OP support say that this might be the case, but I don't know if I want to replace it since my screen is cracked and it will brake it as soon as I open the phone
Hello Everyone, so 2 days ago i hard bricked my MI 8 with flashing an eu rom over global mi 8 rom with twrp then when i rebooted the phone it stuck at mi logo so i tried to goto recovery mode again but nothing happens when i press power + volume up its just mi logo and i tried to go to fastboot mode but not luck i get a black screen....................so i decided to connect it to a computer but no signs of anything(not detected).....so i searched google a little and i found a solution wich envolved disassembling the phone the method called EDL method with test point,,,,,,,so i opened my phone with my friends and tried to do the test points,,,when i joined the testpoints and then connecting the phone to pc.....nothing happened.....it should detect the phone but nothing happens.....please help guys!!!
Keep trying with edl, maybe it's a driver issue, but if you can't get it to edl I don't think you can recover your phone ?
mi_guel said:
Keep trying with edl, maybe it's a driver issue, but if you can't get it to edl I don't think you can recover your phone
Click to expand...
Click to collapse
I have been trying....but no luck till now:crying::crying::crying:
alandxaled said:
I have been trying....but no luck till now:crying::crying::crying:
Click to expand...
Click to collapse
You need to use QPST.
Also you didn't need to open the phone, that step is outdated.
Go ahead and read up on installing all of the needed drivers and as long as your phone is linked to you. That is you have the phone registered to your MiCloud account this issue should be fixable.
I dont have a lot of time today or tomorrow. but I am willing to try and help you figure this issue out.
tsongming said:
You need to use QPST.
Also you didn't need to open the phone, that step is outdated.
Go ahead and read up on installing all of the needed drivers and as long as your phone is linked to you. That is you have the phone registered to your MiCloud account this issue should be fixable.
I dont have a lot of time today or tomorrow. but I am willing to try and help you figure this issue out.
Click to expand...
Click to collapse
I installed the drivers...but the main problem is that when i connect it to the pc ....the pc did not recognize the phone not even in device manager
alandxaled said:
I installed the drivers...but the main problem is that when i connect it to the pc ....the pc did not recognize the phone not even in device manager
Click to expand...
Click to collapse
This could be an issue with the PC...happens all the time.
If the battery is not completely dead, or if the usb port is not completely fried you should be able to at least see the port.
It's also possible that you are not in EDL.
Simply Flashing the EU rom over Global will not brick your phone, I have done that myself many times. Was your bootloader unlocked? If not then you will probably need to take it to a Xiaomi Service center.
Does the phone mac any vibrations when pressing and holding both the volume up and down ( at same time along with the power button?
Have you tried alternate usb c cables?
If you have a newer computer with usb 3.0 ports you will need to use a Usb hub., which will downgrade the connection to usb 2?
Is ADB Installed on this computer along with generic android drivers?
is the computer up to date?
Have you tried an alternate user and are you using the admin account?
If you have a device that uses linux, see if Linux will see the phone.
If you have tried everything, and you still you see the phone, and the phone has not been exposed to an extreme amount of force or to water. It may be that your usb card in the phone is fried or there is a short in the internal usb flex cable. ( It's the wire that connects the usb card to the motherboard.
You can Google the steps to make your own deep flash cable, that would help rule things out much faster.
I am going to sleep now. Good Luck.
@tsongming Do you know why he bricked his phone? I mean he just flashed .eu.
tsongming said:
This could be an issue with the PC...happens all the time.
If the battery is not completely dead, or if the usb port is not completely fried you should be able to at least see the port.
It's also possible that you are not in EDL.
Simply Flashing the EU rom over Global will not brick your phone, I have done that myself many times. Was your bootloader unlocked? If not then you will probably need to take it to a Xiaomi Service center.
Does the phone mac any vibrations when pressing and holding both the volume up and down ( at same time along with the power button?
Have you tried alternate usb c cables?
If you have a newer computer with usb 3.0 ports you will need to use a Usb hub., which will downgrade the connection to usb 2?
Is ADB Installed on this computer along with generic android drivers?
is the computer up to date?
Have you tried an alternate user and are you using the admin account?
If you have a device that uses linux, see if Linux will see the phone.
If you have tried everything, and you still you see the phone, and the phone has not been exposed to an extreme amount of force or to water. It may be that your usb card in the phone is fried or there is a short in the internal usb flex cable. ( It's the wire that connects the usb card to the motherboard.
You can Google the steps to make your own deep flash cable, that would help rule things out much faster.
I am going to sleep now. Good Luck.
Click to expand...
Click to collapse
1-My Bootloader was unlocked yes!
2-i flashed eu rom over evolution rom(Custom rom)
3-Yes It Does Vibrate
4-Yes I Have Tried Other Usb Cables
5-yes, adb installed with generic usb driver
6-yes its updated and i tried mutliple ports
7-i haven't tried linux
8-and i dont think that my usb card is fried because before that it was working
And Another Thing That Might Have A connection with the problem"Before i flashed eu rom over custom rom the unlocked text was shown in the display when booting with mi logo but now that text has gone"
alandxaled said:
1-My Bootloader was unlocked yes!
2-i flashed eu rom over evolution rom(Custom rom)
3-Yes It Does Vibrate
4-Yes I Have Tried Other Usb Cables
5-yes, adb installed with generic usb driver
6-yes its updated and i tried mutliple ports
7-i haven't tried linux
8-and i dont think that my usb card is fried because before that it was working
And Another Thing That Might Have A connection with the problem"Before i flashed eu rom over custom rom the unlocked text was shown in the display when booting with mi logo but now that text has gone"
Click to expand...
Click to collapse
The EU rom does not lock the bootloader, the developers actually removed the bit of code that will allow MiFlash to lock the bootloader. Whenever leaving or returning to Miui, storage must be formatted.
The problem with these custom roms for the Mi8 is that These mi8 developers do not work together ( like most do, on other threads) These developers are always fighting and arguing and accusing each other of stealing their code, while they do it themselves and they all have their own way of doing things. Ideally every rom should use the same device tree, firmware and vendor...The basics! But no, everyone does things differently.
I would suspect that your phone bricked due to firmware encryption or just corruption. Even though it seems that it can't be fixed, you will surely be able to fix it eventually.
Many people were eventually able to solve this exact issue in the past with success. so start with the basics., and dont give up when or if it fails, just try again on a different device, and be sure to disable Windows defender. Because it's possible you could have your computer setup in a way that it will make this process harder to resolve, temporarily disable the antivirus and firewall etc.
Download the All in One tool: https://forum.xda-developers.com/mi-8/development/tool-tool-one-driverstwrpfactory-t3895807 If it gets flagged, and completely disabled. then your computer is helping contribute to this issue.
If you can successfully install and open the tool, use it to update adb and android drivers and to apply system wide adb access. Next manually setup the phone , even if it claims to not see a fastboot device. and attempted to remove encryption. if this fails find a Linux machine to complete these tasks.
See if you can leave EDL, by pressing and holding the power and volume down. >>>>> Even if you dont see the fastboot screen the computer may see the phone in fastboot.
I definitely believe that you will have a easier path to getting this issue resolved sooner by using linux. If you can "format" ( not wipe) user data, install TWRP and root the rest will obviously be easy.
---------- Post added at 06:23 PM ---------- Previous post was at 06:22 PM ----------
Boiisxu said:
@tsongming Do you know why he bricked his phone? I mean he just flashed .eu.
Click to expand...
Click to collapse
He didn't format user data, or the file was somehow corrupted