Related
Hi,
So I flashed Leaked MIUI 7 MM on Mi4 extended partition via TWRP 2.8.7.0 After successful flashing. I reboot phone just went off Display never turned on after that but at that time my device was being detected my PC as QHUSUB_BULK. Now nothing happens when I connect it to PC
If nothing works the last option is to wait for battery to get drained completely, which should get back ur fastboot probably (?)
Me_Ashish_ said:
If nothing works the last option is to wait for battery to get drained completely, which should get back ur fastboot probably (?)
Click to expand...
Click to collapse
Hi i managed to Fix it :good:
mm brick
Prince Chandela said:
Hi i managed it Fix it :good:
Click to expand...
Click to collapse
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
knoxwalles said:
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
Click to expand...
Click to collapse
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
knoxwalles said:
As I'm facing the same issue, how did you fix it?
Thanks a lot :crying:
Click to expand...
Click to collapse
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
+1
If this doesn't work try to disconnect you battery and reconnect it or wait till the battery gets empty by itself (24+ Hrs)
I have posted the soln for this prob in dat Mi3 marshmallow thread .. Check it out..
thanks for the help, very much appreciated
Prince Chandela said:
Hi i managed to Fix it :good:
Click to expand...
Click to collapse
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
Could anyone of you post the link of Qualcomm_QHSUSB 9008 driver? tried searching it everywhere, could not get it anywhere. Thanks in Advance
SharkcpN said:
Could anyone of you post the link of Qualcomm_QHSUSB 9008 driver? tried searching it everywhere, could not get it anywhere. Thanks in Advance
Click to expand...
Click to collapse
No, You don't need any drivers for it. MiFlash will automatically detect it.
Prince Chandela said:
No, You don't need any drivers for it. MiFlash will automatically detect it.
Click to expand...
Click to collapse
I followed your step, thing is my PC fails to detect Mi4 as QHSUSB_BULK, tried it on Windows 8.1/10
SharkcpN said:
I followed your step, thing is my PC fails to detect Mi4 as QHSUSB_BULK, tried it on Windows 8.1/10
Click to expand...
Click to collapse
wait for 12-24 hours or reinsert your battery.
wky750 said:
push power+(volume-) keys at less 2 minutes, when the PC detect it as QHUSUB_BULK, install the "Qualcomm_QHSUSB 9008" driver, the "QHUSUB_BULK" should changed to "Qualcomm_QHSUSB 9008" , then use Miflash, flash the stable or develope package for Mi4, It should work again.
Click to expand...
Click to collapse
bro because of you now my phone is working again, thanks.
i just keep pressing volume down and power button for like 2 or 3 mins, until the logo is showing then i can flash it
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
tommy536 said:
Hey Guys,
yersterday i installed thrue TWRP the LineageOS + LOS Root + Gapps. Everything was fine... till today.
I would like to enter the bluetooth settings. After then, the display recognises no touch, went black. First i could restart the phone. After restart i was going to bluetooth again. But, the same... After that, no more response from the phone. No, Battery LED, No Fastboot, No Recovery. The phone seems dead.
When i connect the phone to PC there is a "qualcomm hs usb qdloader 9008" device listed but no more. Miflash recognises no phone, adb is not showing.
What can i do? In which state is the Phone? EDL?
Click to expand...
Click to collapse
Going black for no reason is a common problem of Mi5.
It's in EDL mode.
Flash a fastboot rom and you will be okay to go.
Sent from my MI 5 using Tapatalk
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
tommy536 said:
Ok, thanks!
How can i flash a fastboot rom? Miflash can not find the Mi5! Have i to use a another Miflash Version?
Click to expand...
Click to collapse
Did you tap refresh in MI flash tool after connecting the device?device shows up only after refreshing.
Or else try this version
http://api.bbs.miui.com/url/MiFlash
Don't forget to uninstall the older mi flash before installing it.
Sent from my MI 5 using Tapatalk
Should i use the original Qualcomm drivers or the MiFlash ones?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
vladimir_carlan said:
You don't need to flash anything. Just disconnect and reconnect the battery. 2 minutes job. You can find a tutorial on YouTube.
Click to expand...
Click to collapse
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
I figured that opening up sealed phone might make people scared or worry for their warranty.
Fastboot flash is easier sometimes maybe?
tommy536 said:
Should i use the original Qualcomm drivers or the MiFlash ones?
Click to expand...
Click to collapse
MiFlash automatically installs drivers.
Sent from my MI 5 using Tapatalk
tommy536 said:
But after then, the warranty is lost...
How often does the Mi5 land in this mode? This is already a risk because of the use in the long term.
Click to expand...
Click to collapse
In my case it happened very often on stock Lineage OS kernel. Never happened on Lineage while I was on DragonXia kernel or on MIUI.
OK! What can i do? Is it possible to switch the Kernel?
I have good news! Phone works after disconnect the battery. But this is not a solution.
I had after rebooting to ROM the same issue when i go to bluetooth settings. BT seems not working probably. If i go twice to BT settings the phone will brick.
Gesendet von meinem MI 5 mit Tapatalk
I had made a new installation with lineage OS without Root and mini Gapps. Now it seems, that BT will work normaly.
where test point redmi 9 (lancelot)
my device cant boot fastboot... help me please?
Ferdyns96 said:
where test point redmi 9 (lancelot)
my device cant boot fastboot... help me please
Click to expand...
Click to collapse
As mtk their is no test point.. follow below link...it may help...
https://forum.xda-developers.com/showpost.php?p=83394363&postcount=1
I've tried that and it always ends up getting an error: status_brom_cmd_fail (0xc0060005)
Ferdyns96 said:
I've tried that and it always ends up getting an error: status_brom_cmd_fail (0xc0060005)
Click to expand...
Click to collapse
Install vcom driver and check if your device is detect as mtk vcom port not as mtk usb device....
How you brick your device??
Shas45558 said:
Install vcom driver and check if your device is detect as mtk vcom port not as mtk usb device....
How you brick your device??
Click to expand...
Click to collapse
I have installed vcom drivers, mi flash tools, mi flash pro. Detected only briefly and again boot stuck MI logo. yes, my bricked device can't enter Fastboot or Recovery
did u unlock bootloader before doing anything to your device?
you should go to this thread
https://forum.xda-developers.com/redmi-9/how-to/antibrick-redmi-9lancelot-t4182515
this will be the solution to your hard bricked device.
Hello,
Just got my new Mi 11 Ultra. Trying to flash Xiaomi.EU ROM but unable to unlock it because the phone isn't detected by mi unlock tool. ADB/fastboot list devices turns up nothing as well.
Tried:
miflash_unlock-en-5.5.224.24
miflash_unlock-en-5.5.1224.27
Out of ideas, suggestions appreciated. Suspect it's a drivers thing but my zip folder has no MiUsbDrivers.exe
Thanks!
https://c.mi.com/forum.php?mod=viewthread&tid=2457586&extra=page%3D1
marcel112 said:
https://c.mi.com/forum.php?mod=viewthread&tid=2457586&extra=page%3D1
Click to expand...
Click to collapse
No such file in the package either.
Package was downloaded from here:
Apply for permissions to unlock Mi devices
en.miui.com
https://miuirom.xiaomi.com/rom/u1106245679/5.5.224.24/miflash_unlock-en-5.5.224.24.zip
Absolutely nothing driver related in the zip.
you did enable developer options i asume
https://c.mi.com/thread-3221402-1-0.html
marcel112 said:
https://c.mi.com/thread-3221402-1-0.html
Click to expand...
Click to collapse
Still nothing. Just turns up empty. Don't even see it in device manager
marcel112 said:
you did enable developer options i asume
Click to expand...
Click to collapse
Yes. USB debugging, associated phone with mi account, OEM unlocking etc all turned on.
Different USB port , other USB cable ? Even other pc?
marcel112 said:
Different USB port , other USB cable ? Even other pc?
Click to expand...
Click to collapse
Tried all ports, swapped a couple of cables too. Cables all work with my old P30 Pro. No other PC to try with. I can also copy files to the device but it just doesn't show up in fastboot. Is it possible I have a faulty bootloader?
justj0sh said:
Tried all ports, swapped a couple of cables too. Cables all work with my old P30 Pro. No other PC to try with. I can also copy files to the device but it just doesn't show up in fastboot. Is it possible I have a faulty bootloader?
Click to expand...
Click to collapse
Sorry I am out off ideas... BL is not my expertice
marcel112 said:
Sorry I am out off ideas... BL is not my expertice
Click to expand...
Click to collapse
Thanks for trying. Do you know of a way to at least switch to global rom without going through fastboot/flashing? I remember xiaomi used to have an app that allowed you to switch on the go.
No because you need fastboot to use Miflash for example ..when you do get fastboot to work... Dont forget to disable lock when switch from CN to global rom
Hello, did you try enter in recovery mode in your windows pc?
hold shift > restart pc > choose Troubleshoot > Advanced options > Startup Settings > Choose the F7 "Disable driver signature enforcement". Now try again detect your mobile.
Using my wife`s notebook i have to do this all the time to detect my mi 11 u, if i use mine, i don't have this problem, i just don't know why this happens, but worked for me
I had this issue, when you go adb devices you get empty device list.
HOWEVER!!!!!!! FOR SOME REASON, YOUR DEVICE IS CONNECTED AND DETECTED. Just keep going with your commands. It will go ahead without any issues.
It is a common scenario that also occured with a few of my friends and people in here.
hassanaliyeh said:
I had this issue, when you go adb devices you get empty device list.
HOWEVER!!!!!!! FOR SOME REASON, YOUR DEVICE IS CONNECTED AND DETECTED. Just keep going with your commands. It will go ahead without any issues.
It is a common scenario that also occured with a few of my friends and people in here.
Click to expand...
Click to collapse
It's not detected by miflash/miunlock so I can't do anything that I'm trying to do
justj0sh said:
It's not detected by miflash/miunlock so I can't do anything that I'm trying to do
Click to expand...
Click to collapse
GitHub - Szaki/XiaomiADBFastbootTools: A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot
A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot - GitHub - Szaki/XiaomiADBFastbootTools: A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot
github.com
Try this tool instead, hopefully it works well for you
justj0sh said:
It's not detected by miflash/miunlock so I can't do anything that I'm trying to do
Click to expand...
Click to collapse
Did you try what i said?
I had the same problem with adb today because I did not use the original xiaomi usb cable. When I changed the cable to original adb worked fine.
Saba Umarov said:
I had the same problem with adb today because I did not use the original xiaomi usb cable. When I changed the cable to original adb worked fine.
Click to expand...
Click to collapse
My phone didn't come with a usb cable. Did your other cable work with file transfer but just not ADB? Because I can copy files but not use the bootloader.
thiagoserrao said:
Did you try what i said?
Click to expand...
Click to collapse
Had to finish some projects first but just managed to. Didn't make a difference unfortunately.
hassanaliyeh said:
GitHub - Szaki/XiaomiADBFastbootTools: A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot
A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot - GitHub - Szaki/XiaomiADBFastbootTools: A simple tool for managing Xiaomi devices on desktop using ADB and Fastboot
github.com
Try this tool instead, hopefully it works well for you
Click to expand...
Click to collapse
"OEM Unlocker & Locker - Lock or unlock the bootloader (Unlocking is only supported by Android One devices)"
I don't think the phone is android one
justj0sh said:
"OEM Unlocker & Locker - Lock or unlock the bootloader (Unlocking is only supported by Android One devices)"
I don't think the phone is android one
Click to expand...
Click to collapse
Lol.. just try it, I used this tool on my mi 11 ultra where Xiaomi tools failed, and it is really good for adb debloat too.
I made a mistake while I was flashing a custom ROM PixelPlus UI in my device Redmi 9
after seccessfully flashing it I locked the bootloader and now my doesn't turn on either going in fastboot mood.I need help to fix it..plz plz plz
Hi, make sure that your battery is full, then hold VOl + and power key together and connect USB cable and see if is detected. The other things is to flash with edl mode but you need testpoint and flash tool like MRT... See over the internet for your model...
Vol+ and power key doesn't shows any sign.
Try then with VOl - and power but keep pressing and plug usb cable, if that doesn't work you need edl flashing....
Does edl supports in MTK processores?
Hi, sorry I mixed your device with Mi 9 model.... For MTK chipset you need BROM mode, so try to hold both VOL + and VOL - and plug usb cable and see if is detected... If it doesn't then send your device to nearby service center in order to flash with service box...
It shows something in ports......and few seconds later it goes away.
Good sign, then follow this flashing... use only if you have same chipset!
Mine is Mediatek G80 / MTK6769
Download Redmi 9 tested Flash File Firmware No Auth 100% Free
Download Redmi 9 tested Flash File Firmware No Auth Firmware Flash by using the SP Flash tool, 100% Free without Authorized MI account
romprovider.com
Do research....
i am trying but the port driver is still disconnecting...it doesnt stays stable
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
Have your issue resolve and if so what exactly have you done, one of my friend done the same and facing the issue.
You are screwed if you locked the bootloader. Nothing you can do. At all.
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
use the bypass_flashtool
bypass_flashtool_driver.rar
drive.google.com
YashxOS said:
bypass_flashtool_driver.rar
drive.google.com
Click to expand...
Click to collapse
go to bypass and run the brom.bat if on windows
conect the device it will regenizi it and force it to be stable
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
YashxOS said:
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
Click to expand...
Click to collapse
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
navrkr said:
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
Click to expand...
Click to collapse
oh ok when done put the [sovled]