could you help me?
I managed to brick my phone
I sd flashed a rollback package on my p9 plus
and after waiting for a day I just realized that its now stuck in logo and when I charge it. It always open and draining the phone
I need help
I can manage to access fastboot but I have no idea how to use it.
Its my mistake on trying to flash a newer stock rom by downgrading first but I managed to brick it and now it opens when I charge it and its stuck on the logo and its always drained so I keep it on charging
Related
Hi
I have been searching through different posts and trying different methods of flashing the correct firmware but nothing works.
Here is what happend.
I have a huawei P9 on Vodaphone in the UK
I unlocked the bootloader and rooted but i could not update to android 7 i just kept getting errors and it was a nightmare to get back to anything below that,
I finally did get back to 6 and all worked fine but it was eva-l09c900 that displayed on my phone and still not updated but i was just happy it was working again so i left it.
I decided a few days ago that i need to update but the same thing happened i got an error and now i am stuck in a boot loop.
I first tried the dload method from a sd card but all firmware i tried failed at 4 or 5%
I then tried to fastboot flash boot.img recovery,img and system.img but still in boot loop
After attempting that i no longer have touch capability
I installed twrp recovery but cant do a thing because touch no longer works
Today i have been trying the huawei update tool method through hisuite
That works right upto about 80% then hisuite crashes just as my phone gives an error.
I am now out of idea's
Please any help would be greatly appreciated
Even knowing what firmware i should be on a huawei P9 from the uk on vodaphone might help because im sure its not c900 but that what i had before i tried to update.
I have tried so many different versions now i dont know anymore .
Thank you
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
xtcislove said:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Click to expand...
Click to collapse
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
jy0un9 said:
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
Click to expand...
Click to collapse
Just the same as mine,my phone version is EVA-TL00(chinese cmcc version),and my current number is EVA-TL00C01B182SP01. Now I can't dload any firmware(press volume up+volume down+powerbutton or dail *#*#2846579#*#*),but when I enter ecovery mode,it can check the new version EVA-TL001B198,when connect the wifi downloading ,it update 4%,finally failed.Now I cannot find what it encounter?It is always in the TL00C01B182SP01 version.Can anybody help me solving this problem,thx.
I finally did it i just kept flashing different firmware in dc pheonix until one worked
Thanks though
Hey all, for some reason my p9 went on a mad one with resurrection remix installed so i tried doing a fresh install of it via twrp, when it rebooted it went into a sort of loop twice then into erecovery, i found the touchscreen was not working so i rebooted into twrp thinking it would work but it didnt, now i have no way of flashing through twrp, i can boot into fast boot, i purchased dc phoenix and hcu licence as i read to when phone is bricked but everything i try on it i cant do nothing, really stuck now and dont know what else to do, all help will be appreciated, thanks in advance.
ps i dont mind if it is just a fresh install of stock firmware just need my phone back now
Please help me I bricked my Huawei P10 VTR-L29C342B360 whilst trying to flash Lineage OS 15.1. What should i do? Where do i find the stock rom to flash if that's what i need to do? When i try to reboot it it just shows the huawei load screen and the one where it says phone cant be trusted and switches between those 2.
I bought a rooted Huawei P10, and when I tried to restore it to stock firmware, I accidentally soft-bricked it.
I can still turn it on, but it is stuck in a boot loop. I can also put it into fastboot/rescue mode and Huawei eRecovery.
I have tried flashing stock firmware through the micro sd card, but with no succes.
The installation always stops at 5%.
I have tried many different guides, and some have suggested I have the wrong firmware.
I have little to no experience in this field, and therefore I need every single bit of help I can get.
INFO:
Model: Huawei P10 VTR-L29
Use firmwarefinder for pc and push an update.
Follow the tutorial that the program will say...and dont forget to push the corect version, try the one that you allready have
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to nokia logo and stuck on it
Many hours readed about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completly battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Classic example of a softbrick can't really call it a hardbrick tbh. PM me all of the details and I'll later make a tutorial if we manage to fix it up.
mati5000 said:
Hey
yesterday i almost bricked or maybe bricked my phone. Accidentally changed partition from B to A. Today my phone boot only to Nokia logo and stuck on it
Many hours reading about this phone back to life. Recover mode not work, fastboot mode not work. This phone one chance to turn off is completely battery discharge.
If no chance to get back this phone to normal i will get throw it to trash
Click to expand...
Click to collapse
I did the same thing.
- Downgrade to Oreo
- unlocked officially bootloader
-fastboot boot twrp.img
booted to twrp- Flashed zip on both slot with latest twrp
Changed slot A to slot B and
we have same problem.
How did you solve your issue?
Did you wait for battery-drain?
Or other combination of buttons.
I tried all the button-combination without success.
Hope you could give advice
Regards
Edit: How to solve!
I simply waited until the battery ran out
When battery was completely dead and no Nokia-logo any more
Then I charged the battery 3% juice without booting
and from there I entered recovery-mode with the help of a USB cable.
Holding the volume+ button while connecting the USB-cable
From TWRP-recovery I changed to the other inactive slot
and whooala, that's it!
I have OEM unlocked my nokia 8 boot loader by nokia official method ,
Then I decide to flash twrp and magick
When boot twrp it give an error that locked
Then I checked some forums and find a way ,
I do what is guided in that forum
Change boot slot b to a ... and I flashed twrp then I flash rom , at the end of flash slide to reboot , then I reboot but after that there is no response in device it went blank and black.....
If I connected to PC in some flash tool it show hs com 3008 and connecting sound in pc but mobile being blank and i cant even get to fast boot mode becoz device get blank ( while connected in pc if I power on or hold power but connection sound will come from my pc but no device or unknown device )
Pls help friends, really dunno what to do
Pls help !
Respond soon pls
Same as me bro.. my ta 1004 is dead after unlocking bootloader official method. And i flash boot twrp and magisk. But my phone always bootlop. I try to flash with ost la. An qfil to recover. But i stuck in download mode. And i try to flash with twrp slide load .
And my phone is dead now.. i can do anithing. My phone can turn on now... i charge it .. but still not respond
Anyone help me