Hello mates the ROM is under test it will be available soon as it is free of minor bugs
Credits LOL!!!
Credits :
1. Samar-V, LordUtkarsh, Jarl-Penguin, and Friends (Device tree, Vendor tree, etc.)
2. Galih Gusti Priatna (wulan17 [Builder])
3. ZainArbani & phhusson (RIL-fix)
4. All Redmi 6A | OFFICIAL™ Members
Nevin jesmon said:
Hello mates the ROM is under test it will be available soon as it is free of minor bugs
Click to expand...
Click to collapse
Based on ..?
Ryu--X said:
Based on ..?
Click to expand...
Click to collapse
aosp
Please don't make a post without actual proof of it's existence or download links just to tease people
the version it has almost stable ,it is a gsi 9 AEX . flash boot and vendor of the patch pack "Redmi6A Treble" flash image rom + magisk V17.1 . if problem "phh patch" .
I don't know how to upload rom ?
MrKreb said:
I don't know how to upload rom ?
Click to expand...
Click to collapse
Mega would be great !!
Hi you go to the official website of AospExtended ROM you take the gsi-generic-arm
aar1968 said:
Hi you go to the official website of AospExtended ROM you take the gsi-generic-arm
Click to expand...
Click to collapse
Downloading...
Any bugs ?
You wanna try AEX Rom
This link you can try AEX
www*mediafire*com/file/ch2qcfa45tz4zlb/AospExtended-v5.8-cactus-20190611-1221-UNOFFICIAL-wulan17*zip/file
Change * to (.)
MrKreb said:
This link you can try AEX
www*mediafire*com/file/ch2qcfa45tz4zlb/AospExtended-v5.8-cactus-20190611-1221-UNOFFICIAL-wulan17*zip/file
Change * to (.)
Click to expand...
Click to collapse
Any guide on how to correctly install a custom recovery?, to try this, i already have unlocked the bootloader, but no root.
FreeRealState said:
Any guide on how to correctly install a custom recovery?, to try this, i already have unlocked the bootloader, but no root.
Click to expand...
Click to collapse
Just instal with twrp + instal magisk first before you restart you phone.
Rom in undertest.. This rom have many much bug
new behavior of the unofficial
"Ryu--x" the official version of 05/19 is long to start but works well, the new does not start and the unofficial loss of network or SMS
Still under testing since the 4th of June: Any update please?
wulan17 said:
Credits :
1. Samar-V, LordUtkarsh, Jarl-Penguin, and Friends (Device tree, Vendor tree, etc.)
2. Galih Gusti Priatna (wulan17 [Builder])
3. ZainArbani & phhusson (RIL-fix)
4. All Redmi 6A | OFFICIAL™ Members
Click to expand...
Click to collapse
Not a single update in more than one month: This thread was an April Fool or something?
mrpsanter1968 said:
Not a single update in more than one month: This thread was an April Fool or something?
Click to expand...
Click to collapse
Did you try the last build or the one before ?
Ryu--X said:
Did you try the last build or the one before ?
Click to expand...
Click to collapse
There are no links to download any build in the 1st post of this thread.
Also, no instructions related to the installation process.
mrpsanter1968 said:
There are no links to download any build in the 1st post of this thread.
Also, no instructions related to the installation process.
Click to expand...
Click to collapse
It is "Xiaomi Redmi 6A Guides, News, & Discussion" topic : so what's the big deal ?
Beside of that there's a link given few posts before ; and if you google the name of the rom, you'll find their website.
Once you have flashed one or two custom roms, you recognize easily if you need to flash with a recovery or with fastboot commands.
Related
Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!
DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?
Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device
What about jio volte is it working on it and if yes then how because in minbe it is working
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried
Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte
If you try arm64aonly it will stuck at mi logo.
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
can any1 confirm if volte works or not plz ?
xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix
Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!
Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.
Mod Edit : Link Removed.
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Please report bugs if found any.
Click to expand...
Click to collapse
A small amount of token would be appreciated as an encouragement.
Click to expand...
Click to collapse
Please Hit Thanks if you found this useful. It costs nothing.
Click to expand...
Click to collapse
You can buy me a Coffee at my PayPal, if you found this helpful.
Click to expand...
Click to collapse
Ui is laggy
hi, thanks for this rom, installed on A510F successfully.
ui is a little laggy but the rom is usable everyday
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Hi Bunny,
Congratulations for this first version!
You did a great job.
In fact I have not found any triple crashes, any kind of problems with third-party apps, no spontaneous reboot, no jamming and / or blocking.
Obviously there is still work on the front of the optimization, in fact the UI laggy in practically every sector, consumption is as anomalous (even if they are not bad to be the first version) and the recharge has problems of overheating, in addition to do not indicate if it is a fast or slow charge
I hope you will continue to develop and that every month you will update the security patches, and maybe one day you will also grow into making it a LOS Official (as it was for dotOS).
hi
bunny the rom is very good .but only one request
please add indian volte file ..
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Thanks
rusiu559 said:
On stock geekbench multi core score is 3600
On this rom or any other,multi core
score is very smaller And this is 1600
Please repair optimilazation
Sorry for my bad english ?
Click to expand...
Click to collapse
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
When a new build comes out, can I just flash the new build over the old build without wiping everything? (TLDR= Dirty Flash Update/New Build?)
Installed yesterday on french A510F.
No problem until now except in configuration wizard if I choose to configure via data instead of WiFi.
Thank you!
Can't find a way to root in order to restore my Titanium backups, is there a way that works? (I've tried these zip: SuperSu v2.82, addonsu arm 16.0 unofficial, magisk v18.0)
Great man! All the best hope you make it stable soon
This ROM on A710FD?
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
DF11GB said:
This ROM can run on A710, and it works fine. I used your files on GitHub to fix bugs, and now it works perfect.:good: Thank you bunnyy
Click to expand...
Click to collapse
darenhoff said:
I am bit confused. Is this ROM can be installed on A710FD? Are the partitions of A5 and A7 same?
Click to expand...
Click to collapse
Yes, it can be installed on all a710 devices ,and I'm trying to port it for a7108 and a5108. I can tell you how to install it on a710, but can't give you the zip. Because some files are from GitHub. The partitions of a510 and a710 are totally the same, except a5108 and a7108.
Really looks good idea
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
DF11GB said:
Try this,. This one is for A710, you need flash A510 boot.img and modify the device information.
https://mega.nz/#!Lchmla7C!nLfT--xu9aK1BlJLBNrbX-G9OwUNaBTVtkflS2HE_EE
Click to expand...
Click to collapse
darenhoff said:
Hi! Can you please elaborate a bit.
The link you have provided (filename probably in chineese) is a boot image.
So, on my A7 (2016), after TWRP(which my device already has), this boot image is to be flashed - is that right? Or ROM is to be flashed then reflash this boot image? and then gapps?
Are you using this device and ROM? I am worried because not a single ROM based on 8.1 for this device is working 100%. Every ROM has its own problems and benefits.
Thanks and Regards
Any developer, if can confirm above, please.
Click to expand...
Click to collapse
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
@bunnyy: are you following this
This thread is for A5 devices, so I hope your uploades are for A5 (2016). But somebody saying it can be flashed on A7 (2016).
Is it correct? OR it may brick a7
bunnyy said:
Issues :
Issues you report; daily drivers working!!
Fixed :
None yet
Builds :
Build 1 : 21/01/2019 (testing)
Announcements :
Build 1 21/01/2019 : LineageOs-v16.0 [Build 1] uploaded.
Click to expand...
Click to collapse
Work ota update ?
DF11GB said:
You can flash this zip any time. Before flash this one, you need flash the ROM, and then flash the vendor of a710 (You can find it on bunnyy's GitHub). Without doing that, you can't use camera.
I have a a710k, and I'm using this ROM.
Click to expand...
Click to collapse
You said you installed this on A7 2016 device, does it run smoothly with no problems? Can you share us the step by step procedure? Will it also be installed on my A710Y device?Thanks
Ingredients used:
1. Device tree: https://github.com/AOSiP-Devices/device_oneplus_enchilada
2. sdm845-common: https://github.com/AOSiP-Devices/device_oneplus_sdm845-common
3. kernel: https://github.com/0ctobot/neutrino_kernel_oneplus_sdm845
4. Vendor blobs: https://github.com/AOSiP-Devices/vendor_oneplus_sdm845-common
ROM sources on github: https://github.com/Colt-Enigma
Download here: https://androidfilehost.com/?fid=1899786940962581536
Installation as usual for OP6:
1. Flash ROM zip in TWRP
2. Flash TWRP zip
3. Reboot to recovery
4. Flash opengapps + (optional) Magisk.
5. Reboot to system
Tested on my own decrypted OP6.
Thanks for building this, am currently using it on op5t and it's super fine with great battery life
Let's see how it will perform in our op6
Do you will support your 10 Roms?
Sh0X31 said:
Do you will support for your 10 Roms?
Click to expand...
Click to collapse
Sure, it's not a problem to make a new build occasionally.
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Really great dev, thanks for your hard work... Because of You, OP6 thread is RICH NOW...
No need to flash the oos zip at the start inorder to boot?
showstopper1 said:
No need to flash the oos zip at the start inorder to boot?
Click to expand...
Click to collapse
You need it for EVERY ROM OUT THERE BRO... flash oos twice... Then flash the rom
quake73 said:
Sure, it's not a problem to make a new build occasionally.
Click to expand...
Click to collapse
Dude this rom slays. Running great on fajita. Thanks man.
What the heck makes high brightness mode keep turning back on after I shut it off?
is this rom using may security?
cmart4 said:
is this rom using may security?
Click to expand...
Click to collapse
yup
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
sky104hk said:
quake73, I test this rom on my OP6, it hangs (dark screen with no respond) after a while (15min~30mins), just dunno anyone hv this problem at all; I flash the SmurfKernel and not sure it's related?
this rom is very nice and fast!
Click to expand...
Click to collapse
It's Kernel Issue as it's already noticed in other rom as well..
..
ColtOS-Enigma 4.1: https://androidfilehost.com/?fid=1395089523397965580
You need to also flash this zip after flashing the rom in order to fix the messed up settings menu: https://androidfilehost.com/?fid=1395089523397965583 (thanks to Rakesh Batra from telegram).
CYB3R0ID694 said:
It's Kernel Issue as it's already noticed in other rom as well..
Click to expand...
Click to collapse
so any other custom kernel can try? pretty love smurf kernel but not quite compatible...
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
pmbonea said:
Thanks for your hard work! Any update for this amazing rom!?
Also crDroid there's no maintainer for op6, could you please have a look at it?
Click to expand...
Click to collapse
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Thanks a lot!:good:
quake73 said:
Doing it right now as I write this
They have included the June security patch (android-9.0.0_r42)
EDIT: as for crDroid, I know that rom from my op5 times, nice rom, sure i could build that one, too. I didnt know there werent any builds for OP6.
Click to expand...
Click to collapse
Can you also merge the Finger Print patches for us 6T Users?
Mannan Qamar said:
Can you also merge the Finger Print patches for us 6T Users?
Click to expand...
Click to collapse
uh, i wouldnt know how to do that
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish Android Q BETA bug reports from my normal (Pie stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Q (One UI 2.0)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
S9 (SM-G960F/DS/FD):
>> G960FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9 Korean (SM-G960N):
>> [nobody sent me a dump yet] <<
Click to expand...
Click to collapse
S9+ Korean (SM-G965N):
>> G965NKSU2ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
Dirty flash over my Pie DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
NOTE1: This time it is mandatory to update also bootloader to Q - otherwise ROM will not boot
>> BL_G960FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965NKSU2ZTA9.zip <<
Click to expand...
Click to collapse
NOTE2: If you want to perform clean install with encryption - it is highly recommended to use TWRP 3.2.3.0 to format /data. More info about bug with TWRP 3.3.1.x - HERE
Known issues:
- SafetyNet does not pass (it is intended by Samsung in beta builds)
- Please let me know
Thanks to:
- all users mentioned in my main thread
- @henklbr for links to update.zip(s)
- @corsicanu & @ambasadii for tips related to Q beta
Do you want to provide dump (e.g. for G960F or a newer version for G965F)?
Please do as follow:
- Make sure OEM unlock is ON
- Flash TWRP but don't let device boot to system after that - use power+bixby+vol_up combo immediately after phone rebooted automatically
- Tap "Keep read only"
- Wipe -> Format data -> "yes"
- Reboot -> Recovery
- Copy attached zip to the device
- Flash it and wait a few minutes
- Copy /sdcard/G960F_dump directory to the PC and compresss it (zip / 7z / rar / etc..)
- Share me and wait for a new Q build
NOTE: DO NOT use Magisk or other boot patchers before you run my zip - I need PURE clean kernel and other images !!! After you run my zip and copy result to PC - you can do what you want
G960F? ????????
Wow, this is fast. Even though this just a test, I'll try and report soon
Sent from my SM-G965F using Tapatalk
Unable to flash magisk
Bookmark wait for more feedback
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
PrinceLc said:
Unable to flash magisk
Click to expand...
Click to collapse
Magisk is on board, there is no need to flash it separately
Ronam said:
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
Click to expand...
Click to collapse
First ROM, then BL (one by one). This order is recommended because BL update forces auto reboot
_alexndr said:
Magisk is on board, there is no need to flash it separately
First ROM, then BL (one by one). Ci order is required because BL update forces auto reboot
Click to expand...
Click to collapse
Thanks, i'll try it.
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
What's that issue? I've had Soldier's Pie ROM before this one.
Ronam said:
What's that issue? I've had Soldier's Pie ROM before this one.
Click to expand...
Click to collapse
CSC just remain from Pie and CscFeatures does not work - you can dirty install RC2 to fix it
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
Just updated to RC2
Please re-download the ZIP file and re-flash the ROM
Can you make exposed work, the modules won't load
Mirror link? Mega stack at 44%
And where is TWRP 3.2.3.0
All fine flashed rc2 over soldier pie rom dirty
Thread has been updated again
This time due to new Beta 5 (ZSLG)
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZSLG_DevBase_v7.0_RC2.zip <<
Click to expand...
Click to collapse
Leejhay1714 said:
Mirror link? Mega stack at 44%
Click to expand...
Click to collapse
I will upload it also to AFH
amakuramio said:
And where is TWRP 3.2.3.0
Click to expand...
Click to collapse
G965F:
https://eu.dl.twrp.me/star2lte/
G960F:
https://eu.dl.twrp.me/starlte/
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
galaxy mini said:
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
Click to expand...
Click to collapse
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
_alexndr said:
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
Click to expand...
Click to collapse
Are You still waiting on a dump for s9?
Isn't there a way we can edit the props to install on s9?