Related
Download the firmware for the Galaxy J7 Prime SM-G610M with product code TTT from Trinidad and Tobago. This firmware has version number PDA G610MUBS1BRF3 and CSC G610MUUB1BRD1. The operating system of this firmware is Android 7.0 , with build date Thu, 14 Jun 2018 23:11:07 +0000. Security patch date is 2018-06-01, with changelist 12546423.
- Model ... SM-G610M
- Model name ... Galaxy J7 Prime
- Country ... Trinidad and Tobago
- Version ... Android 7.0
- Changelist ... 12546423
- Build date ... Thu, 14 Jun 2018 23:11:07 +0000
- Security Patch Level ... 2018-06-01
- Product code ... TTT
- PDA ... G610MUBS1BRF3
- CSC ... G610MUUB1BRD1
Download Firmware ... Sammobile
https://www.sammobile.com/firmwares/galaxy-j7-prime/SM-G610M/TTT/download/G610MUBS1BRF3/225631/
Download Firmware ... Mediafire
https://www.mediafire.com/file/muav9i3bb2o5003/Android_7_Nougat_Stock_J7_Prime_SM-G610M-DS_%255BTTT_-_B1%255D_%255B21-07-2018%255D_By_JHAM2005.rar/file
Download ... Odin
https://www.mediafire.com/file/b31gmzgmx9hn4l8/Odin3-v3.13.1.zip/file
Download ... Samsung USB Driver
https://www.mediafire.com/file/ge9eff95t3dbda0/Samsung_USB_Driver_for_Mobile_Phones_1.5.51.0.exe/file
Installation Instructions
1.- Download Odin 3.13.1 + Samsung USB Driver
2.- Extract the firmware file you just downloaded. You should get 5 files:
- AP (System &Recovery)
- BL (Bootloader)
- CP (Modem / Radio)
- CSC_*** (Country / Region / Operator)
- HOME_CSC_*** (Country / Region / Operator)
3.- Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
4.- Reboot your phone in Download / Odin mode with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
- Option 2 VOLUME DOWN + VOLUME UP than USB cable
- Option 3 POWER + VOLUME DOWN + VOLUME UP
- Option 4 POWER + VOLUME DOWN + HOME BUTTON
5.- Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
6.- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
7.- Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
How to Root J7 Prime * G610M - G610M/DS * Android 7 Nougat Stock
NOTE:
1.- IT IS NECESSARY TO GO TO: Settings -> Developer Options -> OEM unlocking AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
2.- KNOX will be tripped once you flashed custom binaries to your phone.
3.- Samsung Firmware System Updates will no longer work once you flashed custom binaries.
How to Install
1.- Install the Stock Firmware with Odin
2.- Install TWRP
3.- It is necessary to have the files to release the memory and the root file in the Pendrive (USB) to use them by OTG
4.- Enter the advanced recovery and install the ... zip ... no-verity-opt-encrypt.zip ... need a OTG adapter + USB Pendrive
5.- Go back and give ... Then Format Data ... YES ...
6.- Restart the mobile
7.- Configure the mobile to suit the user
8.- Turn off the mobile and enter the Recovery
9.- Install the root zip to use ... SuperSU or Magisk
Restart the mobile
Enjoy :fingers-crossed:
MOUNT INTERNAL STORAGE
- To mount internal storage you need to remove forced encryption by flashing this zip in TWRP
no-verity-opt-encrypt.zip
- Then you may need to format/data to boot properly.
Download ... Recovery (TWRP)
https://www.mediafire.com/file/elwuin9e8jnca2a/TWRP-3.2.1-For-Galaxy-J7-Prime.tar/file
Download ... no-verity-opt-encrypt
https://www.mediafire.com/file/6e6ger5w5i5w1bl/no-verity-opt-encrypt-6.0.zip/file
Download ... SuperSU
https://www.mediafire.com/file/ukltn1drrf1lj1b/SuperSU-v2.82-201705271822.zip/file
Download ... Magisk
https://www.mediafire.com/file/16m3m8bqdtc3v9a/Magisk_-_Root_%2526_Universal_Systemless_Interface_16.7.rar/file
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
You can use the files without any problem, they still work in a previous version
JHAM2005 said:
You can use the files without any problem, they still work in a previous version
Click to expand...
Click to collapse
Thanks for this, I will look around for a good custom rom based on TouchWiz, if you know someone and flashing No-verity and formatting data TWRP still not recognicing ext. sdcard.
Twrp para J7 Prime G610M atualizado ?
israel dos santos said:
Twrp para J7 Prime G610M atualizado ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Is the bootloader necessary?
AeonGV_ said:
https://forum.xda-developers.com/ga...recovery-twrp-3-2-0-galaxy-j7-prime-t3716355/
Here is it, install the 3.2.3 version. But please, speak in english here,it is against the rules to use another language as only a small number of people will understand and be able to help.
Click to expand...
Click to collapse
Is the bootloader necessary?
Heeelp me please !! =D
SubwayChamp said:
I have same CSC: BRD1 but firmware is from other country, security patch: 01/abril.
Do you think that can I install TWRP and root it using these files with no need to flash the firmware TTT?
EDIT. It´s done, it worked for me Odin v.3.12.5 and flashed No-verity and Magisk via ADB sideload
Click to expand...
Click to collapse
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
jpdobler7 said:
I know this post is old but I am having some troubles with my j7 prime g610m. I think the solution is about this "No-verity". Let me explain : I have installed Oreo ROM, Binary 7 some days ago. Then, installed TWRP but this one never shows my internal storage files. It shows "0mb" when I select storage button. I have already done the "format data", change file system, which I've seen on others websites and tutorials. But reading this post I've found something new for me. This file "no-verity" is the solution? I have to flash it, right? To solve this problem... My question is : HOW DO I FLASH IT if my TWRP shows nothing of my files. I read you flashed it via ADB Sideload. Could you please teach me how to it? I'll thank you so much! :fingers-crossed:
Click to expand...
Click to collapse
Sorry for delay, it's really a very old post that I don't remember exactly the issue with TWRP.
Install this universal ADB drivers onto your Windows PC https://adb.clockworkmod.com/ then connect your device power on to the PC, and see if it's properly recogniced typing
Code:
adb devices
if yes then you can continue, type:
Code:
adb reboot recovery
to reboot to TWRP, then place the zip that you want to flash onto your device either DM verity or Magisk in the same folder where ADB was installed, usually on your main drive (this just to avoid paths input) go to Advanced settings in TWRP and search for ADB Sideload feature, swipe from your device to start it and in your ADB/fastboot terminal type:
Code:
adb sideload name-of-your-file.zip
to sideload it to your device and it's all. (replace name-of-your-file.zip with the name of the file that you'll go to flash keeping the .zip extension)
nao pegou SM (610M)DS
UNLOCK BOOTLOADER & ROOT DEVICE
1. Unlock Bootloader (Xiaomi procedure, 7 days via MI Unlock tool)
https://fossbytes.com/how-to-unlock-bootloader-on-xiaomi-devices-using-mi-unlock-tool/
2. Fastboot flash recovery TWRP and root the android 9 rom
(based on https://www.cyanogenmods.org/forums/topic/twrp-download-for-mi-mix-3-5g-and-rooting-guide/)
2.1 Install ADB for Windows and Xiaomi Drivers
2.2 Download TWRP for MI MIX3 5G Android 9 PIE - twrp-3.3.1-0-andromeda.img
https://androidfilehost.com/?fid=6006931924117900528
(based on https://forum.xda-developers.com/showthread.php?t=3941867)
2.3 Rename file to recovery.img and put it into ADB folder on Windows
2.4 Turn off the phone, Reboot to Fastboot (Volume Down + Power)
2.5 Plug the phone into computer
2.6 Open Windows CMD
2.7 Go to your ADB directory
2.8 Type the commands in cmd
cd C:/adb
fastboot devices
fastboot flash recovery recovery.img
2.9 Download Disable Force Encryption and Magisk Zip
https://www.cyanogenmods.org/downloads/disable-force-encryption-twrp-flashable-zip-treble/
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2.10 Copy the files to USB memory stick formatted to FAT32, you should have two files:
Magisk-v20.3.zip
DisableForceEncryption_Treble.zip
2.10 Turn on phone to recovery (Volume Up + Power)
2.11 Go to Menu > Wipe > Format Data > "yes" (this will format the data)
2.12 Go to Menu > Advanced > Fix Contents
2.13 Plug in your USB stick with files via OTG USB C connector
2.14 Go to Menu > Install > Select Storage > OTG
2.15 Select Magisk-v20.3.zip
2.16 Add more zips and select DisableForceEncryption_Treble.zip
2.17 Flash the zips and reboot device
UPDATE FOR TWRP
To gain root you may now only boot the recovery instead of flashing and proceed with flashing Magisk and Disable Force Encryption.
# fastboot boot recovery.img
TWRP 3.3.1-1 Xiaomi Mi Mix 3 5G (andromeda) by mauronofrio:
- Added Android 10 Support;
- Fixed compatibility.zip errors;
- Make the TWRP able to boot directly from fastboot;
- Removed TWRP app;
- Added dtbo and persist target to flash image menu;
- Fixed some problems with Stock ROMs flashing.
Download TWRP: https://androidfilehost.com/?fid=4349826312261701065
Thanks to @mauronofrio
## QUALCOMM DIAGNOSTIC PORT AND TOOLS
(based on https://forum.xda-developers.com/oneplus-7-pro/help/force-enable-volte-vowifi-t3934227)
1.1 Download
https://androidfilehost.com/?fid=11410963190603864074
https://androidfilehost.com/?fid=11410963190603912872
QPST_2.7.474.zip
QUD.WIN.1.1 Installer-10037.3 Setup.zip
Just use the standard settings and click on OK, next,
1.2 OPEN DIAGNOSTIC PORT FOR THE SESSION FOR QPST (WINDOWS CMD ADB)
cd C:/adb
adb devices
adb shell
su (you need to add root permisions on android screen)
setprop sys.usb.config diag,serial_cdev,rmnet,adb
1.3 Once The Port is up you can use your Qualcomm Tools.
1.4 For example you can change the VOLTE/VOWIFI settings with PDC Tool
Select your device, right click on "Commercial" and deactivate Sub0 and Sub1
Click on Oversea-Commercial_DS again and click on remove -- DO NOT CLICK REMOVE, JUST DE-ACTIVATE IT - your settings stick after a reboot, so no longer need to remove the profile (at least on my device my profiles stick, also makes it easier to go back to default)
## FORCE ENABLE VOLTE AND VOWIFI BUTTONS IN ANDROID
cd C:/adb
adb devices
adb shell
su (you need to add root permisions on android screen)
setprop persist.dbg.ims_volte_enable 1; setprop persist.dbg.volte_avail_ovr 1; setprop persist.dbg.vt_avail_ovr 1; setprop persist.dbg.wfc_avail_ovr 1
######################## CODES FOR THE DIALER #####################
1. Diagnostic codes:
*#*#6484#*#*
2. Testing
*#*#4636#*#*
3. Calendar
*#*#225#*#*
4. Google Play services
*#*#426#*#*
5. Rlz Debug Ul.
*#*#759#*#*
6. Imei Information
*#06#
Enter these codes into the Dialer to enable the options in Settings. (Settings < SIM Cards & mobile networks < Sim Card Settings < VoLTE Enabled/Make Calls using WLAN) . THEY ARE ENABLED BY DEFAULT
VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*
##### FLASH ROM AGAIN IF ANYTHING FAILS VIA FASTBOOT ###
01. You need to have unlocked bootloader
02. Download latest ROM based on your model (mine is 5G EEA n78)
Mi MIX 3 5G EEA Stable Fastboot V10.3.21.0.PEMEUXM 9.0 Download 2.5 GB
https://xiaomifirmwareupdater.com/miui/andromeda/
03. Download Mi Flash Tool
https://www.xiaomiflash.com/
04. Open the Mi Flash Tool, install drivers (if the install fails go to Mi Flash directory and create folder logs and log; open app again and install drivers)
05. Unpack the rom fastboot tgz
06. Select the Folder where the rom is unpacked (it should containg numerous of flash files)
07. Tick the Clear Data at the bottom (don't choose the clear data and lock cause it will lock your bootloader again)
08. Turn off the phone, Reboot to Fastboot (Volume Down + Power)
09. Plug the phone into computer
10. Click refresh, phone should be visible
11. Click flash
12. After successfull flash there could be an error fastboot lock (don't bother since you want to be unlocked)
13. If you want root flash twrp and magisk again
Thank you so much for this guide! Can I flash gsi rom with this? Sorry for the noob question
Jktfong said:
Thank you so much for this guide! Can I flash gsi rom with this? Sorry for the noob question
Click to expand...
Click to collapse
I have not tried to load the GSI ROM on that model. I guess there was some other topic under ROM development opened for that
https://t.me/mimix3_5G feel free to join this telegram group chat if you need any help we are all running a custom gsi with aosp 9 and 10 (pixel experience) @mxtuu222
Since last 20.1.9 update lost ecryption in twrp. Installed the latest 3.3.1.1.perseus. since then got loops to twrp. But if i try to launch
fastboot boot C:\mimix\twrp-3.3.1-1-perseus.img it boots to the system.
How to fix it?
dont want to use my PC to start the system every time.
Regards
Most probably you get bootloop, because after the update the partition was encrypted, you need to either flash DisableForceEncryption_Treble.zip or make a backup and install fresh OS with the guide from scratch,
Hey. help me with my problem inversion of the axes of the accelerometer https://forum.xda-developers.com/android/help/inversion-rotated-x-y-axes-accelerometer-t4059277
flash persist did not help me
Root Mix 3 5G
Hello,
i have some problems at point of rooting. my phone accept twrp recovery it's fully working and stays as recovery but when i try to istall magisk 20.4, 19.3 or whatever it will stuck at Mi screen and won't boot. when i reflash original boot img it will boot again but no root. can someone help me?
thank you
Thank you so much for this guide Without it I would have gone a little crazy trying to do a simple reset and update of my phone Saved for reference and I always come back.
I have purchased my Samsung S10 Exynos and successfully rooted it using the only possible ways that have seems to be available so far. I have gained root, but I was wondering if anyone has solved the issue of having to turn the device on with all 3 keys held down at the same time. I understand that this is because the rooted version of the phone has be installed on the recovery of the phone, but I hope that there becomes a way to turn on the phone with root and use only the power button. I check from time to time, but it seems that this has not been solved yet. If anyone can find a solution for me so that I do not have to keep searching then I will reward them $100. An idea that I had is if there was a way to modify the power button to boot into recovery by itself? I believe this would be impossible but if anyone could think of a way to do that then that would solve the problem. I am okay with never being able to unroot the device if this would be the case.
How often do you cold boot?
reboot:
- Magisk boot menu
- adb reboot recovery
DHGE said:
How often do you cold boot?
reboot:
- Magisk boot menu
- adb reboot recovery
Click to expand...
Click to collapse
Hello, thank you for the suggestion. I thought about that idea already and I forgot to mention it in my post. I am looking for a way to do it via a cold boot. I know about the reboot into recovery method already, and I know of a way to map the power button to reboot into recovery if held down, but I am looking for a way to cold boot into recovery with just the power button.
I like your idea, but if there was a way to do it as a cold boot then that is ideally what I'm looking for. Your method would work if there was a way to just keep the phone shut down and wait until I hold the power button to turn it on and then it boot into recovery. If you can think of a way to do that then let me know.
The reason I am seeking this is because I root the S10 out to have a proprietary app on it and the app requires root to function properly. I need the power button to boot with root on the S10 so that it will always do so and my employees / customers will not access the non-rooted side of the phone by accident. The 3 button combination is too difficult, so I would need to resort so either a S8 or S9 if the S10 won't allow power button only to boot with root access. The app that I make uses a great amount of battery life so I need the ability to shut down the phone and cold boot it back into recovery. Thanks.
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
pjc21 said:
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
Click to expand...
Click to collapse
Awesome. Your solution sounds perfect for what I was looking for. Yes, I got my S10 back over a year ago and rooted it with patched AP file and magisk. I was only able to find that method even up until yesterday. I would like a step by step if you are able to quickly put one together. If it works then I am glad to grant you the reward for your help. I am willing to do this in the easiest way possible, even if it requires wiping data. I never used the phone so wiping is no problem at all. I am looking to do this to several devices so the easiest and fastest way would be the best. I will look into your comments and see if I can figure out doing this over this weekend. Will keep everyone updated.
pjc21 said:
Hi, I assume you have rooted using the magisk-patched-recovery method (patched AP file) and if memory serves and from what I am re-reading this method does require the 3-button-combo to boot to rooted system.
When I first got my s10 and rooted this was the only method at the time, but then came custom kernels with built-in magisk.
With this method from power menu if I...
- reboot, phone will reboot to rooted system.
- power off, the power on button will boot to rooted system.
In fact I'm not sure how/if I can boot to non-rooted system with this method.
I currently on custom rom AmbasadiiRom 2.2 with AmbasadiiCruel Kernel G97xF-v3.10.
There are a few custom kernels that have built-in magisk. You will have to check rom compatibility but believe they work on samsung stock based firmware/roms, AmbasadiRomi is based on stock firmware.
- Cruel Kernel
- ThundeRStormS kernel
If you like I can provide a step-by-step, but you will lose all data as it will require flashing stock unpatched firmware, unpatched twrp in odin then custom rom (optional - depending on if the custom kernel does work on stock firmware) & custom kernel.
Click to expand...
Click to collapse
I just read some info on the links you provided and i think i can figure it out. if i have any trouble then ill let you know. Dont worry about a step by step for now unless I have any trouble. Thanks!
Here is a bit of a step-by-step for Samsung s10 Exynos Model:SM-G973F
Info below is based on using December Security patch: 2020-12-01 firmware G973FXXS9DTK9 (Android 10) and Ambasadii Rom
NOTICE: The easiest and fastest way would probably be flashing kernel with stock firmware/rom. I have only done custom (but stock based) roms with kernel so am assuming the steps (5a.) for stock firmware/rom, you may want to post in chosen kernel thread to confirm if those steps are correct.
- both kernels I mentioned say they are compatibly with stock roms & AmbasadiiCruel Kernel is based on Cruel Kernel so I assume that would also work on stock rom.
This assumes you have already unlocked your bootloader, if not check this Recovery thread under Instructions: Odin (windows) - steps 1-6 for how to unlock bootloader.
1. Download all files needed to pc.
- Current latest firmware G973FXXS9DTK9, I use frija tool as downloading from samfirmware.com is very slow.
Enter Model, CSC, check the auto box & click check update and download.
Once complete unzip with 7Zip or preferred zip tool.
- In Recovery thread download latest twrp for device, is this case for S10 G973F latest twrp is - twrp-3.5.0_9-1-beyond1lte.img.tar
Under Instructions: Odin (windows) download
- Odin v3.14.1
- avb disabled vbmeta.tar
- click link to multidisabler-samsung-2.* and download latest version from there, currently multidisabler-samsung-3.1.zip
If sticking with stock and custom kernel
- easiest one looks like it would be Cruel kernel or AmbasadiiCruel kernel.
- check kernel thread of choice for compatibility with stock firmware and specific install instructions.
For custom rom in this example for Ambasadii rom
- Download files from Ambasadii rom site
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip (rom does include previous kernel 3.9 but this one is updated to latest magisk 21.2)
Bootlogo patcher - this will get rid of the warning about bootloader being unlocked when booting phone. (optional)
TWRP_Bootlogo_patcher.zip
Copy the below files to phones external SDCard
- multidisabler-samsung-3.1.zip
- TWRP_Bootlogo_patcher.zip (optional)
- chosen kernel zip - if sticking with stock
Custom Rom files
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip
2. Flashing stock firmware - Odin
- Open Odin on pc
- Turn off the phone
- Use vol down + bixby, then connect usb cable to phone from pc to start the phone in download mode, press vol up to confirm and go to download mode.
- In Odin under log you should see added, I also like to turn off auto reboot under the options tab and do manual reboot once complete but that's up to you.
- Add BL, AP, CP & CSC from the unzipped firmware downloaded in step 1. The AP & CSC can take a little time as they are larger files.
- Once all files added click start and wait until complete, you should see SUCCESS in the top left area once done.
- If you turned off auto-reboot then unplug usb and do manual reboot by pressing vol down + power for 7 seconds, else phone should reboot automatically then unplug.
3. Once phone boots up
- complete setup and connect to Wi-Fi or data
- skip adding Google & Samsung accounts.
- enable developer settings & check OEM unlock is on.
- turn off the phone.
4. Flashing TWRP Recovery - Odin
- In the Recovery thread under Instructions: Odin (windows) continue on from step 8 including formatting data and flashing multidisabler zip which you copied to SDCard.
- in twrp go back to wipe and select advanced and wipe data, cache & dalvik-cache
5a. If sticking with stock & custom kernel - Read NOTICE at top of post
Assumed Steps
- Still in twrp recovery go back to main menu
- select install and flash kernel zip, then TWRP_Bootlogo_patcher.zip
- Not sure if magisk_safetynet_fix is needed or works on stock, would need to confirm in Ambasadii thread.
- go back to main menu and select reboot & system
- give the phone a few minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
OR
5b. If flashing Custom Rom & Kernel - steps below for Ambasadii Rom
- Still in twrp recovery go back to main menu
- select install and flash ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip, choose options in aroma - once the install is complete exit back to twrp recovery
- select and flash mods_DTJA-v1.3.4.zip, then magisk_safetynet_fix.zip, then AmbasadiiCruel-G97xF-v3.10.zip, then TWRP_Bootlogo_patcher.zip
- once you have flashed all files go back to main menu and select reboot & system
- give the phone about 8 minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
6. If you went with Ambasadii Rom
- you will then notice status bar icons are pushed to the right behind the camera
- open rom control, grant superuser rights
- select status bar/options and play around with notch adjustments and positions
- can be a little confusing to start but play around and you'll get the hang of it.
Hope this info helps, let me know if you need any clarification/detail to any of the steps
Also no need for reward, happy to help
pjc21 said:
Here is a bit of a step-by-step for Samsung s10 Exynos Model:SM-G973F
Info below is based on using December Security patch: 2020-12-01 firmware G973FXXS9DTK9 (Android 10) and Ambasadii Rom
NOTICE: The easiest and fastest way would probably be flashing kernel with stock firmware/rom. I have only done custom (but stock based) roms with kernel so am assuming the steps (5a.) for stock firmware/rom, you may want to post in chosen kernel thread to confirm if those steps are correct.
- both kernels I mentioned say they are compatibly with stock roms & AmbasadiiCruel Kernel is based on Cruel Kernel so I assume that would also work on stock rom.
This assumes you have already unlocked your bootloader, if not check this Recovery thread under Instructions: Odin (windows) - steps 1-6 for how to unlock bootloader.
1. Download all files needed to pc.
- Current latest firmware G973FXXS9DTK9, I use frija tool as downloading from samfirmware.com is very slow.
Enter Model, CSC, check the auto box & click check update and download.
Once complete unzip with 7Zip or preferred zip tool.
- In Recovery thread download latest twrp for device, is this case for S10 G973F latest twrp is - twrp-3.5.0_9-1-beyond1lte.img.tar
Under Instructions: Odin (windows) download
- Odin v3.14.1
- avb disabled vbmeta.tar
- click link to multidisabler-samsung-2.* and download latest version from there, currently multidisabler-samsung-3.1.zip
If sticking with stock and custom kernel
- easiest one looks like it would be Cruel kernel or AmbasadiiCruel kernel.
- check kernel thread of choice for compatibility with stock firmware and specific install instructions.
For custom rom in this example for Ambasadii rom
- Download files from Ambasadii rom site
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip (rom does include previous kernel 3.9 but this one is updated to latest magisk 21.2)
Bootlogo patcher - this will get rid of the warning about bootloader being unlocked when booting phone. (optional)
TWRP_Bootlogo_patcher.zip
Copy the below files to phones external SDCard
- multidisabler-samsung-3.1.zip
- TWRP_Bootlogo_patcher.zip (optional)
- chosen kernel zip - if sticking with stock
Custom Rom files
- ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip
- mods_DTJA-v1.3.4.zip
- magisk_safetynet_fix.zip
- AmbasadiiCruel-G97xF-v3.10.zip
2. Flashing stock firmware - Odin
- Open Odin on pc
- Turn off the phone
- Use vol down + bixby, then connect usb cable to phone from pc to start the phone in download mode, press vol up to confirm and go to download mode.
- In Odin under log you should see added, I also like to turn off auto reboot under the options tab and do manual reboot once complete but that's up to you.
- Add BL, AP, CP & CSC from the unzipped firmware downloaded in step 1. The AP & CSC can take a little time as they are larger files.
- Once all files added click start and wait until complete, you should see SUCCESS in the top left area once done.
- If you turned off auto-reboot then unplug usb and do manual reboot by pressing vol down + power for 7 seconds, else phone should reboot automatically then unplug.
3. Once phone boots up
- complete setup and connect to Wi-Fi or data
- skip adding Google & Samsung accounts.
- enable developer settings & check OEM unlock is on.
- turn off the phone.
4. Flashing TWRP Recovery - Odin
- In the Recovery thread under Instructions: Odin (windows) continue on from step 8 including formatting data and flashing multidisabler zip which you copied to SDCard.
- in twrp go back to wipe and select advanced and wipe data, cache & dalvik-cache
5a. If sticking with stock & custom kernel - Read NOTICE at top of post
Assumed Steps
- Still in twrp recovery go back to main menu
- select install and flash kernel zip, then TWRP_Bootlogo_patcher.zip
- Not sure if magisk_safetynet_fix is needed or works on stock, would need to confirm in Ambasadii thread.
- go back to main menu and select reboot & system
- give the phone a few minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
OR
5b. If flashing Custom Rom & Kernel - steps below for Ambasadii Rom
- Still in twrp recovery go back to main menu
- select install and flash ROM.G97xF.XXS9DTK9-v2.2.by.ambasadii.zip, choose options in aroma - once the install is complete exit back to twrp recovery
- select and flash mods_DTJA-v1.3.4.zip, then magisk_safetynet_fix.zip, then AmbasadiiCruel-G97xF-v3.10.zip, then TWRP_Bootlogo_patcher.zip
- once you have flashed all files go back to main menu and select reboot & system
- give the phone about 8 minutes to start, and then complete setup including adding your accounts.
- once setup is complete open magisk and it will run additional setup, and then phone will reboot
- done
6. If you went with Ambasadii Rom
- you will then notice status bar icons are pushed to the right behind the camera
- open rom control, grant superuser rights
- select status bar/options and play around with notch adjustments and positions
- can be a little confusing to start but play around and you'll get the hang of it.
Hope this info helps, let me know if you need any clarification/detail to any of the steps
Also no need for reward, happy to help
Click to expand...
Click to collapse
Hey There, Been busy lately and I haven't gotten around to trying any of these methods until today. Today I attempted the stockrom+CruelKernel. I am having a strange problem. I am acquiring root but as a read-only. I can not make any changes to system files, I can only view them. Can you tell me if you are able to modify or add to the system directory? Let me know. I know your phone is running custom rom + custom kernel, so I just might have to do that if that is the only fix. I have tried several things and read all of the threads but can not find anyone else that is experiencing this issue / I can not find a fix. I'm about to try the custom rom (stock based) + custom kernel to see if that works. If you can tell me if you have access to read/write system files then let me know so I know if this is even possible. Thanks.
I have found out that I can modify system files through twrp recovery, but when I boot into the main operating system then I have root but as read-only.
Hey, sorry for late reply - ever since xda updated it's not sending me emails when I get a notification.
As for the system directory being read-only, I believe this is normal even with root. Root just gives access to the /root dir that you would not normally have without it.
- my system dir permissions by default are 755/rwxr-xr-x
After a bit of searching looks like there are a few ways to change permissions
- twrp, can mount system as r,w - but as you said this reverts on reboot
- adb shell, and chmod permissions, same why you do with linux
- in android using either root explorer or x-plore, haven't tried root explorer as it is a paid app but did test with x-plore and working fine.
check this vid on changing the root access to superuser+mount writable which allows for changes in read-only folders and how to set permissions for files/folders.
I not sure if changing permissions on the system folder itself is safe or would cause any issues, I just created a folder within system and set permissions to 644 reclusive, created some files and rebooted - created folders/files and modified permissions remained fine after reboot.
If you need write permissions in system to install apps as system/app you may find this magisk module useful, it's called App Systemizer which allows you to use apps as system apps systemlessly. Just search in magisk modules.
Hope this helps.
pjc21 said:
Hey, sorry for late reply - ever since xda updated it's not sending me emails when I get a notification.
As for the system directory being read-only, I believe this is normal even with root. Root just gives access to the /root dir that you would not normally have without it.
- my system dir permissions by default are 755/rwxr-xr-x
After a bit of searching looks like there are a few ways to change permissions
- twrp, can mount system as r,w - but as you said this reverts on reboot
- adb shell, and chmod permissions, same why you do with linux
- in android using either root explorer or x-plore, haven't tried root explorer as it is a paid app but did test with x-plore and working fine.
check this vid on changing the root access to superuser+mount writable which allows for changes in read-only folders and how to set permissions for files/folders.
I not sure if changing permissions on the system folder itself is safe or would cause any issues, I just created a folder within system and set permissions to 644 reclusive, created some files and rebooted - created folders/files and modified permissions remained fine after reboot.
If you need write permissions in system to install apps as system/app you may find this magisk module useful, it's called App Systemizer which allows you to use apps as system apps systemlessly. Just search in magisk modules.
Hope this helps.
Click to expand...
Click to collapse
Cool, I'll give your suggestions a try. I'm a fan of ES File Explorer. They have a root explorer built in their app and previously I had a S8 Exynos and a S9 Exynos and that app worked for those phones but with this S10 the switch is grayed out and no other app is working for me either. On my older S8 Exynos and S9 Exynos I rooted with stock-rom + stock-kernel and just needed TWRP+Magisk and I always was able to modify or add/delete system files with ES file explorer. I guess Samsung is getting more and more strict on allowing this by making us hop through more hoops in order to do so. So far I only have ready only system files on the S10 Exynos which is new to me because the S8 and S9 always allowed modifying system files in the past but I will try your methods you suggested. Worst case I'll attempt the custom-rom + custom-kernel and see if that works. Right now I have stock-rom+custom-kernel. I was able to make changes in the system files in TWRP but hopefully your method will allow me to edit system files without having to switch to TWRP every time I want to change something. I will keep you updated.
On a side note I just rooted a Samsung S20 Exynos and turns out that the system files are read only everywhere whether in TWRP or not, so Samsung keeps making things more difficult on us all. I currently have no way of modifying system files on the S20 no matter what I try but that phone is still much newer so I will give the magicians more time before I look into the forums more for that phone. Right now if I can get the S10 Exynos then I'll be happy.
I'll let you know how things progress. If I get what I need done with this S10 then I am happy to give you a donation for your help in this matter. I would not have gotten this far without your help. Previously the S8 and S9 days were so much easier and people had youtube videos galore that described how to root. The process was easy and everything was unlocked as read write back in the S8 and S9 days.
Yeah I use to use ES on android 6-8 then moved of to solid explorer, very similar ui to ES and also has root explorer but unfortunately it does not work to change permissions on s10 android 10 (bloody samsung/google). So far the only free one I have found is x-plore to be able to do this now. Looks like google is locking down android even more now with android 11
REQUIREMENTS - BL UNLOCKED
You need to be on VERSION : RMX3312_11.C.12_IN_202304230924
If not on RMX3312_11_C.12 version - download the entire OTA PACKAGE from the above link & LOCAL INSTALL
Reboot to Bootloader adb reboot bootloader or Power + Volume Down
Take the ROOT BOOT image from the zip file given below and PASTE it in platform tools folder
FLASH the ROOT BOOT IMAGE fastboot flash boot RMX3312_11.C.12_ROOTBOOT.img
Type - fastboot reboot
Finished - Now your Realme GT2 - RMX3312 is now ROOTED!
P.S. : FLASH ON BOTH SLOTS
To keep ROOT when you receive an OTA update
DOWNLOAD THE OTA UPDATE
Let it UNZIP
When it shows - INSTALL / REBOOT TO INSTALL option, put to recents - Open MAGISK
There in MAGISK - SELECT THE INSTALL OPTION on the TOP RIGHT
& then select INSTALL TO INACTIVE SLOT (AFTER OTA) OPTION
Click on OK on the POP-UP MENU in MAGISK
NOW THE DEVICE WILL REBOOT - UPDATE TO THE LATEST OTA & STILL KEEP ROOT!
DOWNLOADS : Both STOCK & ROOT boot images are attached below in one ZIP FILE!
Each Boot Image is 192MB & the compressed ZIP FILE below is 72.6MB.
NOTE : I'm NOT RESPONSIBLE FOR BRICKS, STONES, BLASTS, WIPES etc. of RMX3312
Thank you of the guide.
Just questions, what is meant by "P.S. : FLASH ON BOTH SLOTS"?
and What is the SafetyNet status?
gx7x said:
Thank you of the guide.
Just questions, what is meant by "P.S. : FLASH ON BOTH SLOTS"?
and What is the SafetyNet status?
Click to expand...
Click to collapse
He means you need to run the flash boot command for each slot
for instance your system runs on a slot, as soon as you type the
fastboot flash boot [boot image]
if it shows writing boot_a
then you need to type
fastboot flash boot_b [boot image]
to flash in the b slot also
if it shows writing boot_b
then you need to type
fastboot flash boot_a [boot image]
to flash in the a slot also
and you can pass the safteynet easily even when in root, u can use zygisk and magiskhide to pass the safteynet and you can run any banking app you want
Please do not use the boot images provided if you have not updated to the current latest version
Note: EU version boot image might be different so don't try
p.s you can extract boot images yourself from any version you want!
Stano36 said:
How to extract images from OTA zip files:
Extract the OTA zip file
Download and extract payload-dumper-go
Drag and drop payload.bin on payload-dumper-go executable
Spoiler: Video instructions
Click to expand...
Click to collapse
HIGHLY recommend to extract boot for your version, tnx to Stano36 we have well prepared collation of update. Thanks to Prajwal_Beast for this guide!
I have some questions about "a" and "b" partitions, where can I found some information why we have two partitions and all have two or some of them and etc..
b0nb0n3v said:
HIGHLY recommend to extract boot for your version, tnx to Stano36 we have well prepared collation of update. Thanks to Prajwal_Beast for this guide!
I have some questions about "a" and "b" partitions, where can I found some information why we have two partitions and all have two or some of them and etc..
Click to expand...
Click to collapse
We have two partitions so that if one fails the other can safely boot however most of us are careless and flash on both partitions so it's not really helpful for us
How to root gt 2 running on pixel os?
_PsyDuck_ said:
How to root gt 2 running on pixel os?
Click to expand...
Click to collapse
extract the pixel os file & patch the boot image using magisk & flash the magisk patched boot image
Thanks
Hey guys, i'm sharing how i rooted my phone, hope it helps someone !
Requirements : - A good usb cable (the one that comes with the phone works)
- A pc
- Android USB Drivers ( https://developer.android.com/studio/run/win-usb )
- SDK platform tools ( https://developer.android.com/tools/releases/platform-tools )
- Xiaomi unlock tool ( https://en.miui.com/unlock/download_en.html )
- The ROM (seek for the same version you have, check region also) ( https://xiaomifirmwareupdater.com/archive/miui/mondrian/ )
- Magisk ( https://github.com/topjohnwu/Magisk )
Preparing files : - Extract the platform tools folder and put it somewhere
- Extract the rom folder and put it in platform tools folder, for ease of use
- Create a folder "Tools" (or whatever) and put in Magisk
- Extract xiaomi unlock tool and put the folder in Tools
- Make a copy of your magisk.apk but rename it to magisk.zip. you should be able to open the file like a zipped folder
Unlock the bootloader :- Reboot your phone to bootloader :To do that, you need first to unlock dev settings ; - Go to your settings
- Go to About phone
- Spam click "MIUI Version" until it asks for code/schema/etc
Now you should be able to see dev settings !
Preparing android : - Return to last settings page
- Go to Additional Settings
- Go to Dev Settings
- Turn "OEM Unlocking" on. don't worry, you're not bricking your phone (yet)
- Add your xiaomi account, either with the xiaomi account on the main settings page or just go to MI unlock status just below and they'll ask you to connect to your account
Now you're good to go !
Unlocking your phone (disclaimer : it factory resets your phone so make a backup) - Turn your phone off
- Turn it on again, but while pressing VOL.-. You should see fastboot in orange on your screen
- Connect your phone to your pc using your power cord
- If it isn't done, install the usb drivers to your phone ( https://cdn.discordapp.com/attachments/897374309952126986/933062038081650769/USB_Drivers.mp4 )
- Launch MiFlashUnlock.exe, which should be located in platform-tools -> Tools -> MiFlash unlock if you followed the guide
- Follow instructions (Make sure to connect to the SAME account as your phone), and click unlock !
- Now either your phone is unlocked, or you get to wait 7 days. if you need to wait, There's currently no way to bypass it. You just need to wait this time (and maybe a little more to avoid accidentaly resetting the countdown) and retry unlocking.
Root your phone : - Reconfigure your phone, and allow file transferring in miui
- Grab Magisk.apk and magisk.zip in platform-tools -> Tools and put them on your phone
- Grab the boot.img located in platform-tools -> (name of the rom) -> images and put it in your phone
- Install magisk.apk
- Launch magisk, click the install button and click patch, give it the boot.img you put earlier
- Grab the magisk-patched-(something) in your Downloads folder (in your phone) and put it in your pc
- Shutdown your phone, and put it in Fasboot mode like for unlocking bootloader
- go to platform-tools, and launch a terminal in it
- execute " .\fastboot.exe boot (name of the patched magisk image " it should boot into your OS like usual
- Launch Magisk app and go to Modules
- Click Install and grab Magisk.zip
Voilà ! after the needed reboot you should be rooted permanently, enjoy !
Feel free to post below if there's problems, errors etc. First time writing a guide but hope if helps !