imei lost - Xiaomi Mi A2 / 6X Questions & Answers

Apparently I have missed the imei of my xiaomi mi a2 in a bad flahseo procedure and I do not know how to recover it. Does anyone know what can I do? I'm a little new in this

*06#

Maharram said:
*06#
Click to expand...
Click to collapse
*#06#

mariosenta said:
*#06#
Click to expand...
Click to collapse
Yeah

Maharram said:
Yeah
Click to expand...
Click to collapse
Of course, I execute the command but it does not match the ones that it shows in the purchase box, only a blank box appears, with the loss of the imei I do not have any type of network connection I need to repair it and I do not know how.

victor31king said:
Of course, I execute the command but it does not match the ones that it shows in the purchase box, only a blank box appears, with the loss of the imei I do not have any type of network connection I need to repair it and I do not know how.
Click to expand...
Click to collapse
When you type *#06# your imei code don't apper on the screen?
Have you tried factory reset?

victor31king said:
Of course, I execute the command but it does not match the ones that it shows in the purchase box, only a blank box appears, with the loss of the imei I do not have any type of network connection I need to repair it and I do not know how.
Click to expand...
Click to collapse
Bro, google it. You will find few tutorials how to retrieve lost imei. But I think you should root your phone.

Maharram said:
When you type *#06# your imei code don't apper on the screen?
Have you tried factory reset?
Click to expand...
Click to collapse
I can not restore it from the factory, because it was turned off by some bad procedure and I had to relive it with mi flash

mariosenta said:
Bro, google it. You will find few tutorials how to retrieve lost imei. But I think you should root your phone.
Click to expand...
Click to collapse
There are many tutorials, but they are with other models, so I do not understand very well, I am a little new in this and I really need help

victor31king said:
I can not restore it from the factory, because it was turned off by some bad procedure and I had to relive it with mi flash
Click to expand...
Click to collapse
Maybe this post will help you
P.s. if you dont want to format internal storage then just remove "fastboot erase ddr" line
https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319

Maharram said:
Maybe this post will help you
P.s. if you dont want to format internal storage then just remove "fastboot erase ddr" line
https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319
Click to expand...
Click to collapse
I just need to recover my imei, my cell phone turns on and has all the functions, to the exclusion of wifi and mobile networks, because they do not work because I do not have imei

victor31king said:
There are many tutorials, but they are with other models, so I do not understand very well, I am a little new in this and I really need help
Click to expand...
Click to collapse
You need to look for xiaomi and snapdragon. Before you start, backup everything, so if you mess something up, you can restore it. You have nothing to lose. Tutorial I sent you pm are noob friendly.

Related

Samsung SGH-U700 IMEI Changer

Anyone has a tool that can change IMEI in this phone? Tnx
advice is dont mess with the imei or you will get the "man" mad
ultraprimeomega said:
advice is dont mess with the imei or you will get the "man" mad
Click to expand...
Click to collapse
hahaha
I agree, there are some tools to do that, but in long run, it's really NOT ADVISABLE, to change the IMEI.
Adieu..
why do you want to change your IMEI
besides, changing a phone's imei is harder than just flashing a phone's firmware. Its also extremely risky and not advised to be done without a proper phone technician.

[Q] phone lock

I need to give this command from my laptop to my phone "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity". can u guide me how to do that as my phone is asking to enter phone lock code.
gaganjit9 said:
I need to give this command from my laptop to my phone "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity". can u guide me how to do that as my phone is asking to enter phone lock code.
Click to expand...
Click to collapse
Assuming you're trying to GSM unlock, you need to be rooted and do that command in Android Terminal Emulator.
However, you can just use this and it will do it automatically.
StormyNight said:
Assuming you're trying to GSM unlock, you need to be rooted and do that command in Android Terminal Emulator.
However, you can just use this and it will do it automatically.
Click to expand...
Click to collapse
I ran this command and accidently clicked on IC or NI connection scenario and now its saying enter phone lock code. That's y I need to give the command from laptop
gaganjit9 said:
I ran this command and accidently clicked on IC or NI connection scenario and now its saying enter phone lock code. That's y I need to give the command from laptop
Click to expand...
Click to collapse
Can't help you then, sorry :/
Same issue
I have an unlocked Sprint HTC One M7, but it kept dropping the network. After some research, I was led to believe that if I changed the setting to WCDMA Preferred, I wouldn't have to keep selecting T-Mobile as my network. I dialed *#*#4636#*#* and changed the necessary setting, but it did not work. THEN I became curious and accidentally selected some kind of lock. I erased my entire OS and had to flash a Stock Rom (Rooted and Deodexed however) using OTG/USB. BUT THE PHONE IS STILL LOCKED :crying:. Someone who knows what they are doing please help me with this $500 Paperweight. I'm learning the hard way apparently. BTW, I don't care about the SIM unlocking issue anymore. I just need to be able to use the phone.
4evanoobin said:
I have an unlocked Sprint HTC One M7, but it kept dropping the network. After some research, I was led to believe that if I changed the setting to WCDMA Preferred, I wouldn't have to keep selecting T-Mobile as my network. I dialed *#*#4636#*#* and changed the necessary setting, but it did not work. THEN I became curious and accidentally selected some kind of lock. I erased my entire OS and had to flash a Stock Rom (Rooted and Deodexed however) using OTG/USB. BUT THE PHONE IS STILL LOCKED :crying:. Someone who knows what they are doing please help me with this $500 Paperweight. I'm learning the hard way apparently. BTW, I don't care about the SIM unlocking issue anymore. I just need to be able to use the phone.
Click to expand...
Click to collapse
You should've seen this thread. Anyways what does the phone say? Can you get into the OMADM menu again and select what you pressed again and see if that unlocks your phone?
nah
StormyNight said:
You should've seen this thread. Anyways what does the phone say? Can you get into the OMADM menu again and select what you pressed again and see if that unlocks your phone?
Click to expand...
Click to collapse
Thank you so much for that link. I can't wait to get to that part. At this time, all I can get is Emergency calls and the lock prompt. The info screen won't show from there.
4evanoobin said:
Thank you so much for that link. I can't wait to get to that part. At this time, all I can get is Emergency calls and the lock prompt. The info screen won't show from there.
Click to expand...
Click to collapse
Possible to take a picture or screenshot?
StormyNight said:
Possible to take a picture or screenshot?
Click to expand...
Click to collapse
Sure:
4evanoobin said:
Sure:
Click to expand...
Click to collapse
Hmm... check this link out - http://stackoverflow.com/questions/...om-htc-omadm-test-testmainactivity-lawmo-lock
Is it possible to flash TWRP?
StormyNight said:
Hmm... check this link out
Is it possible to flash TWRP?
Click to expand...
Click to collapse
Yes TWRP is installed. I will try the steps in the link. THANKS! I searched high and low for womeone who had done this exact same thing. Thank you for your diligence. I will post and let you know what works.
---------- Post added at 01:18 AM ---------- Previous post was at 01:06 AM ----------
StormyNight said:
Hmm... check this link out - http://stackoverflow.com/questions/...om-htc-omadm-test-testmainactivity-lawmo-lock
Is it possible to flash TWRP?
Click to expand...
Click to collapse
I found the default code!! It's 1688. Your link led me to another link here on XDA showthread: 2539367 by DC007 Sorry I can't post links yet.
4evanoobin said:
Yes TWRP is installed. I will try the steps in the link. THANKS! I searched high and low for womeone who had done this exact same thing. Thank you for your diligence. I will post and let you know what works.
---------- Post added at 01:18 AM ---------- Previous post was at 01:06 AM ----------
I found the default code!! It's 1688. Your link led me to another link here on XDA showthread: 2539367 by DC007 Sorry I can't post links yet.
Click to expand...
Click to collapse
So is your phone unlocked?
StormyNight said:
So is your phone unlocked?
Click to expand...
Click to collapse
Yes it is! I'm tired now. I will deal with the Sim unlock tomorrow. I'll keep you posted on the signal dropping issue as well if you'd like. Thanks again!
4evanoobin said:
Yes it is! I'm tired now. I will deal with the Sim unlock tomorrow. I'll keep you posted on the signal dropping issue as well if you'd like. Thanks again!
Click to expand...
Click to collapse
Kk. I've tried to do the fix even though it probably wouldn't affect anything, and it didn't work. It might've been because I was on 4.4.2, and the guide was probably made when Jelly Bean was out, so Sprint might've patched it. Anyways, let me know if you get it working and post your steps on how you did it if you followed it differently.

Lost IMEI and got NVRAM Warning

Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Shas45558 said:
No you can not..
You need mirrakel box or like this box to fix imei....i wander why you flash rom with sp??
Click to expand...
Click to collapse
Thank you for a response! I used sp because i hardbricked my phone...
me_smart34 said:
Thank you for a response! I used sp because i hardbricked my phone...
Click to expand...
Click to collapse
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Shas45558 said:
Hmm..i think you erase and update your device and if you do so it is a wrong steps...when use sp you need to check update framware option
Click to expand...
Click to collapse
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
Without imei is it possible to unlock bootloader or root your devices
me_smart34 said:
Hello! I lost IMEI and got NVRAM Warning after flashing Redmi 9 with SP Flash Tool. I tried lots of programs to repair it like Maui Meta, SN Write Tool etc. But I can't get the drivers working properly. Are there any other ways to repair it? If there are, could you please help me to get it working? I feel like I'm already about to surrender...
Click to expand...
Click to collapse
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
me_smart34 said:
The problem is that i checked "firmware upgrade" and it's all erased anyway. I've read this is a common problem when you use sp you lose imei and stuff. I would fix this in a few minutes but this stupid drivers...just can't get them working...
Click to expand...
Click to collapse
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Shas45558 said:
Without imei is it possible to unlock bootloader or root your devices
Click to expand...
Click to collapse
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
VD171 said:
If you didn't backup your IMEI before you lost it, probably you will never can recover both of imei.
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Good luck.
If you lost your imei, definitely you didn't make a firmware upgrade, but a format all.
Yes, you can.
But you need a sim card from an operator that doesn't require the imei for using its service.
And obviously, you need your baseband intact.
If you try a sim card from an operator that requires imei for using its service, the sim card will not be registered.
If you want to restore the state of UNLOCKED BOOTLOADER, you need to follow this guide: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Click to expand...
Click to collapse
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
me_smart34 said:
I just found out that mi flash pro shows my IMEIs when I connect my phone in recovery mode. Could it be possibly happening because of the new firmware and I just need to flash into something different than global version or I'm wrong somewhere?
Click to expand...
Click to collapse
No. It will never write or recover your IMEI.
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
me_smart34 said:
Accidently got the drivers working. Then i tried using maui meta and sn write tool to fix imei but i got errors. For example maui meta says "Write to target failed" and sn gives something like timeout error. Never felt that close...
Click to expand...
Click to collapse
Unhappy, maui meta can't help you.
You need to follow the guide I've sent for recovering only imei 2.
Good luck
VD171 said:
But, you can recover one of them.
You need to write the IMEI to any (newer) device that allow imei writing. (Redmi Note 8 Pro can does it.)
And then, making the imei 1 as empty/null and into imei 2 you can write your new imei.
After it, you can backup the nvdata from that phone and restore it to your device.
So, you will have only imei 2. If you try to write imei 1 too, your device will get nvdata corrupted.
Click to expand...
Click to collapse
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Slaventei2 said:
if use an older device? eg Redmi Note 4. Will this work? p. s english, not my language
Click to expand...
Click to collapse
I'm not sure, sorry. I'm sure only for Redmi Note 8 Pro.
You can try and then tell us the result too

Help Plz imei repair

Here i crossflash 409n to 405ebw but my imei no is 00 i have no any backup of modem or qcn or efs to restore imei i also tried original kdz of 409n but same problem any solution to get out from here?
You need someone's modem EFS/QCN backup file. They need to have the exact same version phone you have
tiguy99 said:
You need someone's modem EFS/QCN backup file. They need to have the exact same version phone you have
Click to expand...
Click to collapse
That way, he could steal someone else's imei? What?
AsItLies said:
That way, he could steal someone else's imei? What?
Click to expand...
Click to collapse
Lol didn't think of that!
Perhaps the person can alter their file and remove their IMEI number or make it all 9s.
He can open the file and edit it with his real IMEI (assuming he has his box or the real number written somewhere)
tiguy99 said:
Lol didn't think of that!
Perhaps the person can alter their file and remove their IMEI number or make it all 9s.
He can open the file and edit it with his real IMEI (assuming he has his box or the real number written somewhere)
Click to expand...
Click to collapse
but see that's the thing, I'm pretty sure he doesn't have it. If he did it would be simple to edit the ftm partition, which has worked for others. But there's really nothing u can do if u don't have it.
AsItLies said:
but see that's the thing, I'm pretty sure he doesn't have it. If he did it would be simple to edit the ftm partition, which has worked for others. But there's really nothing u can do if u don't have it.
Click to expand...
Click to collapse
That absolutely makes sense!
When shopping for mine, I noticed some of these V40s have their IMEI #s printed on the back.
Would be very silly (and lucky) if the O.P lucked out, had an IMEI printed on the bottom and overlooked it.
Otherwise, I'm wondering if he can somehow talk with someone at his phone provider tech support and see if they can share the number of the last phone that connected to their service.
Pretty sure if he catches the right person, they may share his V40's IMEI after he successfully identifies himself
tiguy99 said:
That absolutely makes sense!
When shopping for mine, I noticed some of these V40s have their IMEI #s printed on the back.
Would be very silly (and lucky) if the O.P lucked out, had an IMEI printed on the bottom and overlooked it.
Otherwise, I'm wondering if he can somehow talk with someone at his phone provider tech support and see if they can share the number of the last phone that connected to their service.
Pretty sure if he catches the right person, they may share his V40's IMEI after he successfully identifies himself
Click to expand...
Click to collapse
would be more effective to direct your comment to him, I don't have the issue.
tiguy99 said:
You need someone's modem EFS/QCN backup file. They need to have the exact same version phone you have
Click to expand...
Click to collapse
Sucessfully backup of Qcn from Qfil and edit in hex editor change imei no save and flash flash sucessful but imei no is same
Sherzaman Khan said:
Sucessfully backup of Qcn from Qfil and edit in hex editor change imei no save and flash flash sucessful but imei no is same
Click to expand...
Click to collapse
I had this problem back in the LG G2 days, had trouble with my EFS too but was able to recover. Sounds like something is off and is not coming through from your EFS backup.
If you search my screen name you'll find an old thread I made about it from years ago. Hopefully the steps will be similar and can be helpful to you.

HELP stuck on blue screen "Factory reset status 2"

Hello,
When trying to mess up with the "NT Code" as told in this thread https://forum.xda-developers.com/t/...d-countries-also.4575655/page-2#post-88600477
I ended up with my phone stuck on this blue screen with "Factory Reste Status" and a big red 2 displayed.
I don't know at all what to do... tried vol down + pwer and it goes again in this menu... The phone boots by itself and goes back to thsi menu.
I think I messed up with LG UP..... can someone help me I want to get back my phone...
I had not fiished to back up my data so factory reset would be my last wish as first I would like tro try save some data pelase.....
Hello
Make a backup of FTM and restore the attached file in place of it.
Could you please explain how do I do such backup please ?
Will I lose all my data ?
Cryomichel said:
Could you please explain how do I do such backup please ?
Click to expand...
Click to collapse
You need to learn how to work with Qfil so search for some tutorials.
Cryomichel said:
Will I lose all my data ?
Click to expand...
Click to collapse
Maybe I'm not sure.
netmsm said:
You need to learn how to work with Qfil so search for some tutorials.
Click to expand...
Click to collapse
I looked for hours and wasn't able to make it work.... I wanted to backup partitons but Qfil didn't wanted to do so.
You provided a ftm file so you seem to know a lot more than me about this. Could you explain how you got it please ?
netmsm said:
Maybe I'm not sure.
Click to expand...
Click to collapse
That's what I'm fearing... I dunno what will happen. I had not finished backing up data, I was just trying to understand how it's working and how to use those softwares :'(
Cryomichel said:
I looked for hours and wasn't able to make it work.... I wanted to backup partitons but Qfil didn't wanted to do so.
You provided a ftm file so you seem to know a lot more than me about this. Could you explain how you got it please ?
Click to expand...
Click to collapse
In Qfil just click on a partition and then choose "read data" on right-click to dump/backup the partition.
Read the section B here it will gave some hints so that you can figure out how to work with Qfil.
Cryomichel said:
That's what I'm fearing... I dunno what will happen. I had not finished backing up data, I was just trying to understand how it's working and how to use those softwares :'(
Click to expand...
Click to collapse
Your device is in PDM mode I do not think that you can make it without flashing however sometimes flashing FTM alone can do the trick but I'm not sure if it factory resets or not.

Categories

Resources