moto g6 xt1925-10 root - Moto G6 Questions & Answers

I got moto g6 xt1925-10 i couldn't find any way to get the modified boot image to root. I'm bootloader unlocked. Plz help me how to root and where to find the dtock firmware as I'm bricked. All i found is other models nothing for xt1925-10. Plz help me. Greetingz

Finally i managed to root xt1925-10.download & Flash stock OPS27.82-19-4 build without flashing bootloader gpt.bin. booted up normal and followed this guidehttps://www.google.com/amp/s/forum....e-twrp-root-magisk-installation-t3816569/amp/
finally i got root and twrp. Thanks xda

Related

Rogers Moto X 1053 Unlocked bootloader - how return to stock ?

Hi all, sorry if this has been asked before..
I didn't know that kit kat 4.4.2. cannot be rooted lol, so I unlocked my boot loader and spent hours trying to load recovery (TWRP or CWM), obviously with no luck.i saw something online that said 4.4 and I assumed it was good for 4.4.2. Didn't work anyways.
Is there any way to load the factory Rogers rom back on so that I don't have that unlocked bootloaeer warning on every boot ?
If yes, any idea where I can download ??
Also, will this change my status on fast boot to Locked ?
I was so looking forward to setup recovery and root, oh well, I still love the device and will be ok at stock until a fix comes out.
Any help would be very much appreciated
Thanks so much
I don't have time to give extreme details but maybe I can still help point you in the right direction.
First off the Rogers Moto X is an XT1058, not an XT1053.
Once the bootloader is unlocked you can easily root the phone with twrp - same version is used for 4.4 and 4.4.2
You can relock the bootloader but the warning is technically always present. You can overwrite the image with a different one though.
The factory firmware is available for download, you can flash it yourself with rsdlite.
There are easy to find threads with all of the details needed to restore to 100% stock or root the Moto X. A few minutes searching and you should find them. Give it a shot, if after that you have further questions by all means please ask.
Hi, thanks for the reply
You are correct, its a 1058 and I officially unlocked my bootloader with motorola and voided my warranty...
I used this link
http://dottech.org/147327/how-to-root-moto-x-on-android-4-4-kitkat-guide/a
And when I try to install the recovery in terminal, it says (bootloader) variable not supported)
It then says writing recovery, finished (so it seems to write it), but I follow instructions, then reboot using terminal command "fastboot reboot" and try to boot into recovery but its blank.I even tried just rebooting to recovery and it still didnt work...
Or it just reverts to stock boot up.
I have tried others also but cannot seem to get it working properly.
Any chance you can guide me though it ? I would really appreciate it...
Hi I did some searching and got it figured out
Thanks again for your help
Hi again,
For some reason, when I went to reboot this morning, TWRP is gone. I boot into recovery and blank screen, seems it didnt hold.
Any idea why ??
Thanks
Steve-x said:
I don't have time to give extreme details but maybe I can still help point you in the right direction.
First off the Rogers Moto X is an XT1058, not an XT1053.
Once the bootloader is unlocked you can easily root the phone with twrp - same version is used for 4.4 and 4.4.2
You can relock the bootloader but the warning is technically always present. You can overwrite the image with a different one though.
The factory firmware is available for download, you can flash it yourself with rsdlite.
There are easy to find threads with all of the details needed to restore to 100% stock or root the Moto X. A few minutes searching and you should find them. Give it a shot, if after that you have further questions by all means please ask.
Click to expand...
Click to collapse

need help on a vzn dev edition and root

hope someone can help.i have a vzn dev ed thats bootloader unlock and rooted on 4.4.2 but every time i turn off the phone and turn it back on root is gone and i would have to root again. if anyone can help me out it would be great. thanks in advance for any help
Did you use PIE root method?
Sent from my XT1060 using Tapatalk
i flash recovery twrp with moto toolkit the first time and it work but when i reboot i would lose root.then i try towelroot it would give me root again but if i reboot i would lose root. anyway to solve this would be great. thanks in advance
If you can boot into recovery (twrp) just flash the su zip, if you search the forums or Google you will find a link
You used a toolkit to flash recovery and root the phone? In the time it took to download and get the toolkit ready, you probably could have downloaded mfastboot, recovery, and a superuser zip and had all of them flashed and no issues.
i8rice said:
hope someone can help.i have a vzn dev ed thats bootloader unlock and rooted on 4.4.2 but every time i turn off the phone and turn it back on root is gone and i would have to root again. if anyone can help me out it would be great. thanks in advance for any help
Click to expand...
Click to collapse
If you are using a tool kit, I have to ask.. Have you visited Moto's web site, requested the unlock code for your phone, and actually used it (mfastboot oem unlock uniquecode)?
If you have a developer edtion, consider this... Don't use the tool kit, instead...
Install Android Platform Tools, ADB, mFastboot and the Moto drivers by following -> http://mark.cdmaforums.com/ADB.htm
Root by following -> http://forum.xda-developers.com/moto-x/moto-x-qa/step-step-instructions-unlocking-t2649738 however, since it was written some time ago, get and use the newest TWRP from -> http://techerrata.com/browse/twrp2/ghost and get the newest SuperSU from -> http://download.chainfire.eu/supersu and copy it to the /SDCard in your phone (or just download it from the browser on your phone so its in /sdcard/download folder before you start)... Use these versions when following that process.
If you already got your unlock code from Moto's web site and used it, then you can skip step 1.
And step 5 should be started with the phone UNPLUGGED.
thanks for all the reply. i have it unlock by Moto's web site with the code.i have twrp 2711 and everything flash fine. i flash with the new su 2.0 in twrp2.7.1.1 it said flash successful but when it boots up i still have no root. i use rsd lite and flash Google Play Edition 4.4.2, by Q9Nap where the rom is already rooted. root work fine until i reboot i would lose root again.thanks in advance for any and all the help
i8rice said:
thanks for all the reply. i have it unlock by Moto's web site with the code.i have twrp 2711 and everything flash fine. i flash with the new su 2.0 in twrp2.7.1.1 it said flash successful but when it boots up i still have no root. i use rsd lite and flash Google Play Edition 4.4.2, by Q9Nap where the rom is already rooted. root work fine until i reboot i would lose root again.thanks in advance for any and all the help
Click to expand...
Click to collapse
Did you ever try to downgrade to 4.4 and use something like slapmymoto or MotoWpNoMo or something before?
Either way, based on the past seeing similar symptoms.. I would consider downloading the stock verizon 4.4.2 SBF and then follow Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html to get back to stock, then try TWRP and SuperSU again. (and yes there are a few lines/commands repeated there, that is intentional)
Heard of this another time....but can't find the thread. All signs for that person was bootloader unlocked and write protection still enabled.

[q] moto x brick bootloader help

Hello! I'm desperate, yesterday did unlock the bootloader moto X, I was with 4.4.4 Rom, then put a custom rom based on stock 4.4.2 and there asked me to update, I put the recovery of the stock to be able to upgrade and not get in infinite boot, only to my surprise when done updating the phone did not turn over, was in the bootloader screen and will not go anywhere when I try to get into some of the options appears the name "failed" .. I am in despair. The following images: HELP ME PLEASE
thanks guys
Can you get into fastboot mode to flash your carriers 4.4.4? If not maybe this can help.http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good luck! You are in a bad situation.
managed
Travisdroidx2 said:
Can you get into fastboot mode to flash your carriers 4.4.4? If not maybe this can help.http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good luck! You are in a bad situation.
Click to expand...
Click to collapse
Managed, solved the problem by installing the Stock Rom 4.4.4. Thanks: D

[Q] Rooting Guide

Hello, can anyone provide me with a rooting guide for the Moto X 2014 XT1097 running Android 5.0.2 for mac? I have been searching for a while, but can't find one. Any help I appreciate so so so much.
Fastboot boot latest twrp and let it install SuperSU on reboot.

Stuck at " recovery not Seandroid enforcing" after root n9208

Hi guys I have the latest firmware installed ( see screenshot) whenever I try to obtain root via chain fires autoroot or through custom kernel for n9208 my phone gets stuck at bootloader. Is there any way to fix this.
Ps the crom services app always force closes . And I followed every step on root tutorials
Hi, i got same problem with new firmware update, lost my root and tried to root again with chainfire autoroot, but didnt work, tried a couple of times...no luck, at this step i still can boot android, then tried flash xiaolu kernel...at this step i got boot loop, both space kernel also failed to boot, so if you havent flash any kernel with odin, you still can boot after flashing twrp recovery, but if you already messed with kernel, there no way to to fix it...better flassh new firmware, and use stock until someone can find a way to root 5.1.1, hope its help...
Dyosr said:
Hi, i got same problem with new firmware update, lost my root and tried to root again with chainfire autoroot, but didnt work, tried a couple of times...no luck, at this step i still can boot android, then tried flash xiaolu kernel...at this step i got boot loop, both space kernel also failed to boot, so if you havent flash any kernel with odin, you still can boot after flashing twrp recovery, but if you already messed with kernel, there no way to to fix it...better flassh new firmware, and use stock until someone can find a way to root 5.1.1, hope its help...
Click to expand...
Click to collapse
Isn't there a way we can simply downgrade to the last rootable firmware?
if you're on the latest firmware, i recall having to install the AOK2 bootloader to root my N9208 using the original root methods (not the Systemlesss Root method). check the TWRP thread for details. The situation may have changed, but when i upgraded my firmware to AOL1, i had to downgrade the bootloader to AOK2 to regain root.
cortez.i said:
if you're on the latest firmware, i recall having to install the AOK2 bootloader to root my N9208 using the original root methods (not the Systemlesss Root method). check the TWRP thread for details. The situation may have changed, but when i upgraded my firmware to AOL1, i had to downgrade the bootloader to AOK2 to regain root.
Click to expand...
Click to collapse
How did you downgraded your boot loader? I am sorry but I'm really new to galaxy development.
PS is it safe to flash a firmware from December over my current version which is from march
Lucas Eugene said:
How did you downgraded your boot loader? I am sorry but I'm really new to galaxy development.
PS is it safe to flash a firmware from December over my current version which is from march
Click to expand...
Click to collapse
check the TWRP thread for details and links to downgrade the bootloader. please note/remember, i downgraded from AOL1 to AOK2. not sure if this works with any firmware newer than AOL1. in my case, i reflashed the AOL1 firmware, then downgraded/flashed the AOK2 bootloader and then rooted using the original 9208 root method.
cortez.i said:
check the TWRP thread for details and links to downgrade the bootloader. please note/remember, i downgraded from AOL1 to AOK2. not sure if this works with any firmware newer than AOL1. in my case, i reflashed the AOL1 firmware, then downgraded/flashed the AOK2 bootloader and then rooted using the original 9208 root method.
Click to expand...
Click to collapse
Thanks so much for your advice! I was finally able to roof my phone. Realised that I was being too noobish
Thanks for your time
Lucas Eugene said:
Thanks so much for your advice! I was finally able to roof my phone. Realised that I was being too noobish
Thanks for your time
Click to expand...
Click to collapse
Hi, how do you do it can explain step by step, thanks, i believed many N9208 user need it
Note 5 N9208 6.0.1 Root without Seandroid Error - https://androidmtk.com/root-samsung-galaxy-note-5-duos-sm-n9208

Categories

Resources