Database Develop

Speaker Grills

I would just like a consensus of how many folks have Sprint HTC M8 where the speaker grill holes don't line up on the top and bottom speakers (on the right side) I called HTC and they said this was normal. While it may be nit picking, I don't expect this on such a high end phone.

the top is shorter because of the camera. the camera lines up with the rest of the grill on the bottom

This is normal for many phones. Both the Nexus 5 and the iPhone 5s have a consistent misaligned speakers throughout the line of their products
But yes, both of the speakers are offset to the left on my HTC One m8 as well
Sent from my 831C using XDA Premium 4 mobile app

The actual speakers aren't all across on the bottom or top, they're both on the left side.
Sent From My HTC One (M8)

I have a different issue with the speaker grilles. I returned my first M8 because the metal(?) plate on the bottom was raised on the right side where it meets the screen, instead of being flush like it's supposed to be. The new unit I got is perfect at the bottom, but now the upper grille is very slightly raised where it meets the screen on the right side (to the right of the camera). I can push it down, but it comes back up after a few minutes (like there's some kind of adhesive that doesn't hold it down properly)... Minor, but very irritating! Anyone else have problems with the speaker cover plates not being flush with the screen?

The bottom right grill is slightly raised on mine

slightly raised on top and bottom on mine

bimmerbot said:
I have a different issue with the speaker grilles. I returned my first M8 because the metal(?) plate on the bottom was raised on the right side where it meets the screen, instead of being flush like it's supposed to be. The new unit I got is perfect at the bottom, but now the upper grille is very slightly raised where it meets the screen on the right side (to the right of the camera). I can push it down, but it comes back up after a few minutes (like there's some kind of adhesive that doesn't hold it down properly)... Minor, but very irritating! Anyone else have problems with the speaker cover plates not being flush with the screen?
Click to expand...
Click to collapse
Sorry to bring up an old thread, but I recently bought a used m8 ATT off someone and converted it to the GPE. And now I've noticed that this phone has the metal on the top raising above the screen (right side around the camera). I can push it down but it comes back up after a while.
I contacted HTC and they said that the phone is under warranty but I would have to send it in for diagnostic to see if it qualifies for a warranty repair or they would quote me how much it would be to fix.
I unlocked the bootloader on HTC's website which I'm pretty sure voided the warranty and they will be able to tell no matter what I do. So does anyone know how to fix this annoying issue? DIY style that is

elijahblake said:
Sorry to bring up an old thread, but I recently bought a used m8 ATT off someone and converted it to the GPE. And now I've noticed that this phone has the metal on the top raising above the screen (right side around the camera). I can push it down but it comes back up after a while.
I contacted HTC and they said that the phone is under warranty but I would have to send it in for diagnostic to see if it qualifies for a warranty repair or they would quote me how much it would be to fix.
I unlocked the bootloader on HTC's website which I'm pretty sure voided the warranty and they will be able to tell no matter what I do. So does anyone know how to fix this annoying issue? DIY style that is
Click to expand...
Click to collapse
Yes, I fixed mine by just lifting up the grille (it's actually plastic and just held on by adhesive) and applying some new adhesive to the back of the grille. I wouldn't use super-glue, but something a little thicker/gooier to fill the gap. Maybe a dab of silicone (I used something silly... "liquid skin" from the first aid cabinet. It worked, but I wouldn't recommend it because it slightly discolored the coating on the back of the grille!). Good luck!
You can also find replacement grilles online that will have fresh adhesive, but you have to do some searching and I think they come from China, so you'd have to wait a while for shipping.

bimmerbot said:
Yes, I fixed mine by just lifting up the grille (it's actually plastic and just held on by adhesive) and applying some new adhesive to the back of the grille. I wouldn't use super-glue, but something a little thicker/gooier to fill the gap. Maybe a dab of silicone (I used something silly... "liquid skin" from the first aid cabinet. It worked, but I wouldn't recommend it because it slightly discolored the coating on the back of the grille!). Good luck!
You can also find replacement grilles online that will have fresh adhesive, but you have to do some searching and I think they come from China, so you'd have to wait a while for shipping.
Click to expand...
Click to collapse
Was yours only raising up on the right corner? If so was it hard taking the whole cover off without messing it up?

elijahblake said:
Was yours only raising up on the right corner? If so was it hard taking the whole cover off without messing it up?
Click to expand...
Click to collapse
Yes, it was only raising on the right corner. I didn't try to remove it completely, as I just wanted that side to stay down. Just use something to apply adhesive carefully to the back of the grille (it's flexible plastic), then stick it back down (and apply pressure until it dries).

[H][Q] Problems Galore with my M7 (speakers, camera, screen)

Hello everyone! I bought a used M7 which I found for a reasonable price and it has a couple of issues that I think I may be able to fix (provided your most appreciated assistance). My phone has the following problems:
1st The top speaker is blown out and listening to music with the phone is quite irritating, close to unbearable. The lower speaker sounds acceptable (although coming from a nexus 4 and based on reviews I was expecting to be blown away)
2nd According to the previous owner the screen was replaced and the person who did the job was unable to properly glue the top left part of the screen, leaving it a bit loose and making the union between the top speaker grill and the screen a bit sharp and uncomfortable, specially when swiping down from the notification bar.
3rd The bottom speaker grill is not perfectly glued and a bit loose. Same for the top speaker grill (plus the fact that it's a bit bent inwards)
4th The usual M7 purple daemon camera tint
The 4th problem has been extensively covered in this forum so I have a good idea of what I'm expected to do to fix it, but I'm not sure about the speakers and the screen. Thus fellow XDArs, I'd like to ask you
1 Can I remove the grills without having to dissasamble the majority of the phone? (prying them out just like the M8)
2 Are the top and bottom speakers exactly the same making? (I can't find all the necessary spare parts in my country but given that I found a seller who has the speakers I was considering replacing them both)
3 How can I properly glue the part of the screen that is protruding from the back case of the phone?
Any idea and or suggestion will be much appreciated. Thanks!

Sorry to up my post but I've waited for a day and my post ended up on the second page of the forums . Help anyone?

https://www.youtube.com/watch?v=UEaKX9YYHiQ

Unusually low volume on earpiece speaker

Anyone having the same problem? Im not sure if its because of the whitestone adhesive, the dual speaker mod or what. Its getting annoying that I need to use the speaker just to hear the person im talking to.

Is this happening only when placing calls through your carrier or also when placing whatsapp and facebook messenger calls?

you probably got some of the Whitestone adhesive leaked into the earpiece speaker and then dirt/dust clogging it up, several people reported same thing happening, some careful cleaning with pure alcohol and wipes should sort it

RossTeagan said:
Is this happening only when placing calls through your carrier or also when placing whatsapp and facebook messenger calls?
Click to expand...
Click to collapse
I only call through my carrier, and I notice how weak it was when the dual speaker mod sounded a bit odd

j_hansen said:
you probably got some of the Whitestone adhesive leaked into the earpiece speaker and then dirt/dust clogging it up, several people reported same thing happening, some careful cleaning with pure alcohol and wipes should sort it
Click to expand...
Click to collapse
Well.. it " leaked INTO the earpiece " how would alcohol clean the inside?
Update
Sorry for talking first, reasearching later.
So ive made a search about this and what you said was exactly what they did.

chancces are it is just a little bit and it hasn't leaked deep into it but basically just covering the earpiece and clogging it up, give it a shot, you have nothing to lose anyway

xDreDz said:
Well.. it " leaked INTO the earpiece " how would alcohol clean the inside?
Update
Sorry for talking first, reasearching later.
So ive made a search about this and what you said was exactly what they did.
Click to expand...
Click to collapse
After alchol drys. Run speaker cleaning app. They have them in play store. Similar situation happened on 1 of my old phones. The app helped after cleaning out with alcohol.

I had low volume on the ear placed speaker, tried all of the various tricks.
Only way to get my volume back was compressed air

note 8 earpiece volume
xDreDz said:
Anyone having the same problem? Im not sure if its because of the whitestone adhesive, the dual speaker mod or what. Its getting annoying that I need to use the speaker just to hear the person im talking to.
Click to expand...
Click to collapse
Ok heres the scoop on low note 8 earpiece volume. i moved up from a note 5 and could barely hear my calls. i looked at note 5 earpiece and holes are open. i looked at note 8 and found the holes are covered with aluminum---no open holes??? i used a magnified reader to see them. i used a pin and gently open 6 holes across the speaker again useing magnifier i could see the holes open. guess what? i had to turn the volume down!!! i don,t know if that aluminum cover was supposed to be removed at assenbly but the note 5 has nothing shiny on the earpiece speaker. i am now a happy camper and no longer hae to use my bluetooth earpiece.: CAUTION don,t need to push on pin hard just put it there and twist it a bit u will feel it move.

Well, maybe you punctured a water seal, I would be very careful about moisture and splashes, not to say submerging the device

I had the same issue with my note 8 I bought. The ear piece was more of a brown color than black so I knew it was clogged with dust or something. I took it to a professional and they said they would have to replace the entire LCD screen since the speaker was linked into it. They told me it would cost $280 to replace it. I told them to basically piss up a rope and I left. When I got home I used gorilla tape and put it over the mesh speaker and pressed it in with the end of a screwdriver just enough to get it touching the mesh..not hard. Pulled it off and did this a couple more times. The speaker mesh looks brand new and I hear perfect now. So try that.

jusgrr8 said:
Ok heres the scoop on low note 8 earpiece volume. i moved up from a note 5 and could barely hear my calls. i looked at note 5 earpiece and holes are open. i looked at note 8 and found the holes are covered with aluminum---no open holes??? i used a magnified reader to see them. i used a pin and gently open 6 holes across the speaker again useing magnifier i could see the holes open. guess what? i had to turn the volume down!!! i don,t know if that aluminum cover was supposed to be removed at assenbly but the note 5 has nothing shiny on the earpiece speaker. i am now a happy camper and no longer hae to use my bluetooth earpiece.: CAUTION don,t need to push on pin hard just put it there and twist it a bit u will feel it move.
Click to expand...
Click to collapse
You are a life saver man. I mean i thought i had to give my phone for repairing or replacing the ear piece. But your solution worked like charm. You deserve appreciation.:good:

You can use compress air to clean out the earpiece

Michaelmc88 said:
I had the same issue with my note 8 I bought. The ear piece was more of a brown color than black so I knew it was clogged with dust or something. I took it to a professional and they said they would have to replace the entire LCD screen since the speaker was linked into it. They told me it would cost $280 to replace it. I told them to basically piss up a rope and I left. When I got home I used gorilla tape and put it over the mesh speaker and pressed it in with the end of a screwdriver just enough to get it touching the mesh..not hard. Pulled it off and did this a couple more times. The speaker mesh looks brand new and I hear perfect now. So try that.
Click to expand...
Click to collapse
Been ages since I logged into this website. Had to do a password reset just to say Thank You. This worked like a charm. I had the low volume issue since a year but did not actually think of searching for a fix because I was using either loud speakr or headset. Thanks again. I was using the low volume as an excuse to buy a new phone which I wont now

Cleaning P20 Pro loudspeaker

Hi to all,
I was cleaning P20 Pro loudspeaker near USB C. I pulled the toothpick in those holes. And everything is OK. But now im scared did I Damaged mesh that keeps water enter to phone.
I think the i didnt see mesh in some holes...
P. S. And can you check on your P20 Pro when you playing some music at high volumes, put your finger near left then right 5 hole's. Did you feel how right speakers "blowing". Is this same thing to you?

I think on this photo I see the some black mesh are like broken. Are this first black mesh for for dust ir for water resistant?

can't confirm 100%, but its likely just a mesh for the dust. the speakers themselves will have an additional seal around their edges

Upper Speaker Issue

I recently bought phone. Since there is no screen protector for note 9 in my around, i temporary plug a protector for note 8 with nano luqiud with glue and uv light. Problem is does note 9 speakers give both same amount of db and my phone's upper speaker went a little less powerful since liquid leaked into speaker. Or It is normal to upper speaker have a little bit less sound? Sorry for my grammer.

If you spilled the glue into the speaker it will probably sound lower than normal. I don't notice a difference in loudness between the top and bottom speaker.

The upper speaker pushes less db than the main firing speaker. The waterproofing fabric for the speaker is deeper inside than the Note 8. If you look in with a light, you can see a gap between the actual grill and the waterproofing fabric for the speaker. If glue got in there I'm afraid the only way you can get it out is by taking the device apart.
Also, with these type of speakers and the waterproofing material being used, once liquid touches the fabric, the sound is dampened out because there is no longer free vibration of the fabric to let the sound travel, aka sound "loud."

xXECHOXx said:
I recently bought phone. Since there is no screen protector for note 9 in my around, i temporary plug a protector for note 8 with nano luqiud with glue and uv light. Problem is does note 9 speakers give both same amount of db and my phone's upper speaker went a little less powerful since liquid leaked into speaker. Or It is normal to upper speaker have a little bit less sound? Sorry for my grammer.
Click to expand...
Click to collapse
Use some alcohol and a tooth brush to scrub out the glue. Then, blow it out with a can of compressed air. accidentally got some glue in my S9+ doing a rush job and the speaker wasn't as loud. This rectified the problem. You may have to scrub and spray repeatedly a few times, but I managed to get mine cleaned out.

bsims85 said:
Use some alcohol and a tooth brush to scrub out the glue. Then, blow it out with a can of compressed air. accidentally got some glue in my S9+ doing a rush job and the speaker wasn't as loud. This rectified the problem. You may have to scrub and spray repeatedly a few times, but I managed to get mine cleaned out.
Click to expand...
Click to collapse
Using compressed air, make sure you don't damage the top speaker's delicate diaphragm (the extremely thin material that moves and creates the sound). If you tear or warp it, the top speaker quality will be worse, and sound distorted. It happened to my friends S9 when he had water in it from going for a swim and forcefully blew in it with his mouth to get the water out. It never recovered.

DareDevil01 said:
Using compressed air, make sure you don't damage the top speaker's delicate diaphragm (the extremely thin material that moves and creates the sound). If you tear or warp it, the top speaker quality will be worse, and sound distorted. It happened to my friends S9 when he had water in it from going for a swim and forcefully blew in it with his mouth to get the water out. It never recovered.
Click to expand...
Click to collapse
why would you want to use compressed air to push the water even more in the device/part again?