Mcu for erisin 5790u HELP ! - Android Auto General

Hi guys , after a reset , my bluettoth and my rear camera not working more . ERISIN 1DIN ES5790U . ANDROID 6
i find the issue for reset the MCU for upgade or reset .
Many thanks for your help .
regards

Good you found a solution, since after my restart the android stayed in startup bug and just loaded the operating system and I can't find the rom or update file to be able to recover it.
Solved after putting the last update thanks
https://drive.google.com/drive/folders/1iRcQPSewKXu2Itx1yZvnWRrl64CaUR_f

Related

T5353++ DualOS

Hey everyone, I'm experiencing a big of a problem.
I have t5353++( http://forum.xda-developers.com/wiki/Chinese_Clones_T5353++_DualOS ). I installed the Android only rom from http://www.solonomi.com/rom/T5353/07-13-T5353-2.1.rar website and now it wont turn on...Have you any ideas on how to fix the problem or if there is a way of booting up the phone so I can put the old OS back on.
Rx:Tx:Gnd
This is some pictures of my motherboard :
h**p://imageshack.us/photo/my-images/818/imag0009gh.jpg/
h**p://imageshack.us/photo/my-images/17/dsc01666eu.jpg/
Can anybody tell me how to find (Rx:Tx:Gnd) points on motherboard and flash software to unbrick my phone.

Powers up and stops (freezed)

Hi there,
Phone has suddenly frozed, like I power up and stops there.
It could be firmware problem? so the best way is reinstall firmware ?
Regards,
E
eddyys said:
Hi there,
Phone has suddenly frozed, like I power up and stops there.
It could be firmware problem? so the best way is reinstall firmware ?
Click to expand...
Click to collapse
you can try factory reset BUT undo any lagfix you had before factory reset. or you can flash the firmware (look in MY Android Collections link below) meant for your region or this
Check this out! You , YES! you are an " Android ". Not your phone but U.​
eddyys said:
Hi there,
Phone has suddenly frozed, like I power up and stops there.
It could be firmware problem? so the best way is reinstall firmware ?
Regards,
E
Click to expand...
Click to collapse
First of all flash XXJVU official. You
will surely get out of the problem.
Read my post in the below link. I tried to keep the
process easy as much as I could.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Restore your last nandroid backup if you have it.
It could be also caused by any recently updated app. The app devs make many mistakes for single android versions. I update my apps only manually one by one and after previously done backup by Titanium. And I seldom update apps that work fine. That saved me many problems.
It is like tetakpatak automatic update of many apps can result in such problems...my doing is update app step by step ...so you can see when problems went up ...

Internal Storage Reduced to 3.8GB

Hello .
Today I tried to Upgrade to B602 .
First I Installed B133. Then After The Update of B602 I Got Error of Com.android.process.phone has Stopped .
Then After i Restored Back To B135 using 3-Button Method Internal Storage Was Reduced to 3 Gb
Can SomeOne Help Me Please .'
 @surdu_petru @natorus87
Need Urgent Help :crying::crying::crying::crying:
andromodgod said:
Hello .
Today I tried to Upgrade to B602 .
First I Installed B133. Then After The Update of B602 I Got Error of Com.android.process.phone has Stopped .
Then After i Restored Back To B135 using 3-Button Method Internal Storage Was Reduced to 3 Gb
Can SomeOne Help Me Please .'
@surdu_petru @natorus87
Need Urgent Help :crying::crying::crying::crying:
Click to expand...
Click to collapse
Sadly I can't help with this problem although I can relate to it. Like you I attempted to downgrade, but made a complete mess of it. Ended up with a phone that was totally trashed. I guess your lucky in that you still have a functioning device. I threw mine out and ordered a replacement from AliExpress. It's finally arrived (an L10) and cost US$251.00. No more upgrades for me. It's too troublesome and not very cost effective. If you can't solve your problem, perhaps a replacement might be your best bet. Good luck!
Just use TWRP v. 2.8.1.0, then WIPE and choose Format Internal Storage, confirm "yes".
It could help you !!!!
I found a thread talking about a simmilar issue you have with a nexus 4 device. It could help you a lot !!!!
http://forum.xda-developers.com/nexus-4/general/how-to-fix-internal-storage-16gb-8gb-t2033692
I hope you solve this problem soon !!!!!
Thanks
Thank You All For The Help . Even Though the Phone is P7-L10 I Used The P7-L07 Update Package and Upgraded to B608 and The Partition Restored Successfully .
andromodgod said:
Thank You All For The Help . Even Though the Phone is P7-L10 I Used The P7-L07 Update Package and Upgraded to B608 and The Partition Restored Successfully .
Click to expand...
Click to collapse
Good to hear. You're doing a lot better than me.

bootloop help

I'm having some mad problem with boot loop
up and ready for work just went out to car the other day
turned the key and no stereo just come up with Opel logo HELP HELP HELP
I'm at a loss cause here don't no anything bout android I no more bout apple I have es9781 jellybean 4.2.2 android os
any help to this matter will be gratefully appreciated
I just had this problem and fixed it. I tried reflashing the firmware that I was currently using, Malaysk, but I never got past my logo. I emailed the manufacurer and they sent me the original MCU and Image files. I reflash those and no such luck. I was ready to send the unit back. I had personal information on the head unit so I used the "wipe all data" choice in the recovery menu. After wipine the data, I reflashed the manufacurers mcu and image files. This time the head unit booted back to normal. Not sure if the data wipe was the solution to the fix, but it worked for me. I'm no expert on any of this so I can only guess that maybe something went corrupt while I was using Malaysk ROM.

A Big Bug of Android P Update ? Please Help me !

I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Ngheoden said:
I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Click to expand...
Click to collapse
I ve got problem too! I got update today .... system->system updates (was on 9.6.17.0) and after downloaded and applying i had option "RESTART"
After restart -> BLACK SCREEN
(Flashing again V9.6.10.0 version, that one was thy only one that worked with MiFlash - newer couldnt install system on my MI A2)
Ngheoden said:
I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Click to expand...
Click to collapse
Force restart the device.
caaajq said:
I ve got problem too! I got update today .... system->system updates (was on 9.6.17.0) and after downloaded and applying i had option "RESTART"
After restart -> BLACK SCREEN
(Flashing again V9.6.10.0 version, that one was thy only one that worked with MiFlash - newer couldnt install system on my MI A2)
Click to expand...
Click to collapse
Seems like i have disabled GGkeyboard before cause i used to another keyboard for getting better exp in my language ! After restart several times, i turned off power and like you said : Black Screen !
zurik said:
Force restart the device.
Click to expand...
Click to collapse
i did it but it doesn't work ! After that , i have to use factory reset and lose my document =(( . The problem have been sovled !

Categories

Resources