Related
Hi everyone. I tried finding info on my firmware, but somehow i couldn't find wether or not it is "rootable" it is 12.0.A.1.257, global version. Can someone confirm if it is indeed rootable. Thanks!
skojevac said:
Hi everyone. I tried finding info on my firmware, but somehow i couldn't find wether or not it is "rootable" it is 12.0.A.1.257, global version. Can someone confirm if it is indeed rootable. Thanks!
Click to expand...
Click to collapse
YES its rootable all you need to run the doomloard's event exploit from original dev section.. happy rooting
ok, I checked that thread and now have additional question for anyone who can have a time and knowledge to answer. obviously there is a new stock rom 12.0.A.2.245 for our bellowed SP. now, I have that older version 12.0.A.1.257 and though I tried updating device firmware I receive message that my phone is up to date. so I assumed this is probably due to some drug deal sony have with my operator ( the one the phone came from) and now for some reason sony would not let me update firmware (yet). so my question is next, actually there are several questions:
A. am I'm going to brick my phone if I manually download and update new firmware via flashtool regardless of sony saying my device is up to date?
B. Is this new firmware 12.0.A.2.245 so much better that is actually worth updating? (this should be A)
C. if i root this old firmware and perhaps install CW as well, and than update to the new one, am I'm going to loose both root and CW, or perhaps only CW after updating? or i will get to keep root and CW?
D. is it better to update and than root, or root and than update?
i hope this is not too much. thanks! :angel:
ps. i forgot to say, though my phone came from an operator, it is not sim locked and boot unlock status is YES
skojevac said:
ok, I checked that thread and now have additional question for anyone who can have a time and knowledge to answer. obviously there is a new stock rom 12.0.A.2.245 for our bellowed SP. now, I have that older version 12.0.A.1.257 and though I tried updating device firmware I receive message that my phone is up to date. so I assumed this is probably due to some drug deal sony have with my operator ( the one the phone came from) and now for some reason sony would not let me update firmware (yet). so my question is next, actually there are several questions:
A. am I'm going to brick my phone if I manually download and update new firmware via flashtool regardless of sony saying my device is up to date?
B. Is this new firmware 12.0.A.2.245 so much better that is actually worth updating? (this should be A)
C. if i root this old firmware and perhaps install CW as well, and than update to the new one, am I'm going to loose both root and CW, or perhaps only CW after updating? or i will get to keep root and CW?
D. is it better to update and than root, or root and than update?
i hope this is not too much. thanks! :angel:
ps. i forgot to say, though my phone came from an operator, it is not sim locked and boot unlock status is YES
Click to expand...
Click to collapse
A. no unless u r on unlocked bootloader that should brick our phone.
B. every firmware bring new advantages and disadvanteges..so i think u should upgrade it because camera has been improved! (low light photography)
C no u will loose both root and cwm
D both first update than root !! ROOT IS AWSM!!! it makes u feels that device is actually yours!!
thanks for a quick reply. so, I am going to update first and than do that "flash old kernel - root - flash new kernel" thing. and than backup the TA partition from here http://forum.xda-developers.com/showthread.php?t=2292598
I would like to save the BE and DRM keys 'cause I'm sure I'll unlock bootloader as well that entire process is what makes android so much better that sh**pple. like you said, you actually get to own your device. thanks again and thanks XDA!
Hello friend.Want to install a Chinese version on my device. What are the risks? My version is 2.12 European version and my device is 3S Red Magic. Please anyone who can give me a good guide. It is important to note that the device's bootloader is locked
Any help please?
rafib78 said:
Any help please?
Click to expand...
Click to collapse
You can flash cn rom directly form update option local update
I thought of doing so. But after reading it I realized that a lot of people got stuck after 25%. And I'm really afraid that it will get stuck for me too. Which version should be installed? Old? New?Should the bootloader be locked?
rafib78 said:
I thought of doing so. But after reading it I realized that a lot of people got stuck after 25%. And I'm really afraid that it will get stuck for me too. Which version should be installed? Old? New?Should the bootloader be locked?
Click to expand...
Click to collapse
Before you flash make factory data reset and flash ..you wont get error ..i did many times no problem
Thank you very much friend. And does it matter if I install an old or a new version? I am currently in the latest global version ..
Please help me. Which version to install? The latest? Or older..The bootloader should be unlocked? Because my bootloader is currently locked. My device is Red Magic 3S. I am currently on the global version. The latest version 2.12. Is it possible to root without Break the Wi-Fi? If anything can give a more detailed explanation I would really be happy. Many thanks to everyone who will answer.
rafib78 said:
Please help me. Which version to install? The latest? Or older..The bootloader should be unlocked? Because my bootloader is currently locked. My device is Red Magic 3S. I am currently on the global version. The latest version 2.12. Is it possible to root without Break the Wi-Fi? If anything can give a more detailed explanation I would really be happy. Many thanks to everyone who will answer.
Click to expand...
Click to collapse
I am on 3.11 with rooted no problem with any issue
Do I need to unlock bootloader before installing a Chinese version? I downloaded one version from the official site before the latest Is it safe to install it directly from my global version? I use otg to install. Is it safe to install?
rafib78 said:
Do I need to unlock bootloader before installing a Chinese version? I downloaded one version from the official site before the latest Is it safe to install it directly from my global version? I use otg to install. Is it safe to install?
Click to expand...
Click to collapse
Yes go ahead
---------- Post added at 12:33 PM ---------- Previous post was at 11:52 AM ----------
rafib78 said:
Do I need to unlock bootloader before installing a Chinese version? I downloaded one version from the official site before the latest Is it safe to install it directly from my global version? I use otg to install. Is it safe to install?
Click to expand...
Click to collapse
Yes go ahead
Hello,
I have bought a Mi 11 yesterday version M2011K2G,
I found out that the bootloader was unlocked on it, but when I check it has a global ROM installed already on it,
the thing is that it's not making any update, so I guess it's not an original ROM ?
I want to put back the original ROM and lock the bootloader back in order to have updates,
can you please help me on how I can do this without breaking the phone ?
or I'm I not getting the updates just because the bootloader is unlocked and if I lock it I will get them back ? I'm just scared if I lock it back the phone will break,
or you think I should install back the ROM and lock it back to get everything better ?
Thanks !
What version of ROM do you have?
fotocreaman said:
What version of ROM do you have?
Click to expand...
Click to collapse
here it is attached,
when I check updates it says no update available
Normally an unlocked bootloader has no affort to the update. How did you get notice about that? If your bl is really unlocked I would stay with that.
Are you maybe on latest version? Can you take a screen shot of settings - my device - All secs
sweatbox said:
Normally an unlocked bootloader has no affort to the update. How did you get notice about that? If your bl is really unlocked I would stay with that.
Are you maybe on latest version? Can you take a screen shot of settings - my device - All secs
Click to expand...
Click to collapse
I know it's unlocked cause I see the unlocked "padlock" when I restart the phone, other than this I don't have any idea of what modification could have been done to it since I'm used to use my phone the way they come with, thats why I want to get it back to stock ROM or get the updates to make sure it's all good
Here is the latest Rom for eea.
It's interesting that rkbeusf is nowhere to find.
Well unzip the fastboot file put the fastboot files from miui into it and try the installation without locking
sweatbox said:
Here is the latest Rom for eea.
It's interesting that rkbeusf is nowhere to find.
Well unzip the fastboot file put the fastboot files from miui into it and try the installation without locking
Click to expand...
Click to collapse
if I use the Mi Flash and I don't lock it after flashing it, I won't get the upcoming updates will I ?
I mean, is there any way to lock it back ?
I kind of want to make the phone as it went out from factory
I never used mi flash, sorry.
My first step on new phones are always to unlock the bootloader so I can flash root and restore the apps with titanium.
And I got always updates through Ota.
I switched to xiaomi.eu rom, because it was faster with miui 12.5
sweatbox said:
I never used mi flash, sorry.
My first step on new phones are always to unlock the bootloader so I can flash root and restore the apps with titanium.
And I got always updates through Ota.
I switched to xiaomi.eu rom, because it was faster with miui 12.5
Click to expand...
Click to collapse
thanks man, I will try install this ROM you gave me, I have noticed that when I make "download latest packages" it directly says "impossible to download..."
I wonder why it's doing this
Sorry if I misunderstood you, but you will have to scroll down until you see fastboot then a bit more to 'full rom' and click on the blue button
Edit:
Tested it right now and it works fine for me (download started)
Edit 2:
Seems to work with MI flash tool too:
Found on the mitool side:
Step 1: Download the correct Fastboot ROM on the Windows PC by double-checking the compatibility. Then extract and get the workable extensions on the PC (use the Rom above)
Step 2: installation bla bla
Step 3: too
Step 4: too
Step 5: Then attach the ROM file
Step 6: Switch Xiaomi device into the Fastboot mode. So turn off the device and simply take a long press and hold the keys of Volume Down and Power keys
Step 7: Then connect the device to the PC with a proper USB cable which is in the Fastboot mode
Step 8: Now you can enter the tool interface and check whether the device is connected
Step 9: Then select the most suitable flashing option from all three “Flash all”, “Flash all except storage” and “Flash all except data and storage”
Step 10: Hit flash from the top of the window and wait for several minutes
Step 11: Once the process is done you can reboot and finalize the process successfully.
sweatbox said:
Sorry if I misunderstood you, but you will have to scroll down until you see fastboot then a bit more to 'full rom' and click on the blue button
Edit:
Tested it right now and it works fine for me (download started)
Click to expand...
Click to collapse
thanks bro it worked, it now checks the updates and make them when they're available, my wife won't ask the divorce finally haha
one last question and I leave you,
my phone is a 12gb 256 (chinese) if I install that same ROM I installed, will I get autoupdates on it or that version can only update on it's chinese ROM ? any idea ?
For my understanding it will work too. The 12 GB ram is EU is not available but it's only additional ram and does not have an other rom.
... So if you can install and use your phone with that rom you will have no issues with updates
abiedster said:
thanks bro it worked, it now checks the updates and make them when they're available, my wife won't ask the divorce finally haha
one last question and I leave you,
my phone is a 12gb 256 (chinese) if I install that same ROM I installed, will I get autoupdates on it or that version can only update on it's chinese ROM ? any idea ?
Click to expand...
Click to collapse
Be careful, don't lock bootloader with a global or EEA ROM on CN hardware, you will brick your phone.
Take care when using Miflash with CN flashed to global. Now you are on production software, best to stay there unless you want to install custom ROMs. OTAs should work now. 12.5.1.0 is the latest for EEA.
onslaught86 said:
Be careful, don't lock bootloader with a global or EEA ROM on CN hardware, you will brick your phone.
Take care when using Miflash with CN flashed to global. Now you are on production software, best to stay there unless you want to install custom ROMs. OTAs should work now. 12.5.1.0 is the latest for EEA.
Click to expand...
Click to collapse
thank you so much to both of you, my CH was on a global version 12.5.3.0 I wonder what version it was but it couldn't download or not even check the updates, I'm switching it to this other version, hopefully I will have OTAs from now on
thank you again guys !
sf=sfr opérator french
onslaught86 said:
Be careful, don't lock bootloader with a global or EEA ROM on CN hardware, you will brick your phone.
Take care when using Miflash with CN flashed to global. Now you are on production software, best to stay there unless you want to install custom ROMs. OTAs should work now. 12.5.1.0 is the latest for EEA.
Click to expand...
Click to collapse
Isn´t all Mi 11 CN = China hardware ? I think it is safe to relock bootloader if you are on original ROM. Do you mix hardware and rom with each other.
primazz said:
Isn´t all Mi 11 CN = China hardware ? I think it is safe to relock bootloader if you are on original ROM. Do you mix hardware and rom with each other.
Click to expand...
Click to collapse
primazz said:
Isn´t all Mi 11 CN = China hardware ? I think it is safe to relock bootloader if you are on original ROM. Do you mix hardware and rom with each other.
Click to expand...
Click to collapse
do you think that even if it's a Chinese version, if I'm on an officiel original ROM (even if it's global and not chinese) I can relock the bootloader ?
abiedster said:
do you think that even if it's a Chinese version, if I'm on an officiel original ROM (even if it's global and not chinese) I can relock the bootloader ?
Click to expand...
Click to collapse
You say you bought version M2011K2G. How did you came up that is chinese version ? Thats global not chinese rom. If your phone is originally global then you can relock.
https://xiaomiwiki.github.io/wiki/Flash_official_ROMs.html
primazz said:
You say you bought version M2011K2G. How did you came up that is chinese version ? Thats global not chinese rom. If your phone is originally global then you can relock.
https://xiaomiwiki.github.io/wiki/Flash_official_ROMs.html
Click to expand...
Click to collapse
oh, no my wife's is a global one, and mine is the chinese 12gb one, I did install ROM sweatbox gave to me on both of them, but I didn't lock any of them. I wanted to lock the global one but I got scared it breaks it so I left it unlocked
abiedster said:
oh, no my wife's is a global one, and mine is the chinese 12gb one, I did install ROM sweatbox gave to me on both of them, but I didn't lock any of them. I wanted to lock the global one but I got scared it breaks it so I left it u
Click to expand...
Click to collapse
Ok sorry for my misunderstood.
Hi guys,
i flashed tons of roms since i got my phone. Now i want to revert back to miui 10 android 9 ~v10.3.17 - xiaomi.eu, as miui 10 always was best with battery life for me.
Should i first flash the official stock rom from c.mi.com with fastboot mi flash tool to get rid of all my mess i have done in those years or can i just flash xiaomi.eu via twrp ?
I have the chinese version redmi k20 pro 8gb 128gb raphael.
Thanks.
Danny94 said:
Hi guys,
i flashed tons of roms since i got my phone. Now i want to revert back to miui 10 android 9 ~v10.3.17 - xiaomi.eu, as miui 10 always was best with battery life for me.
Should i first flash the official stock rom from c.mi.com with fastboot mi flash tool to get rid of all my mess i have done in those years or can i just flash xiaomi.eu via twrp ?
I have the chinese version redmi k20 pro 8gb 128gb raphael.
Thanks.
Click to expand...
Click to collapse
Flashing Xiaomi.eu will only replace the system. It's probably better that you first re-flash the complete stock, also MIUI 10/A 9, to have the clean situation like in the old days
@zgfg thank you very much for your answer.
May you can tell me if i should prepare anything to get the bootloader unlocked again easily or is it the same procedure like requesting the file from mi.com ?
And maybe you can tell me if i can flash eea or global rom aswell as i live in Italy/europe or china is required ?
Danny94 said:
@zgfg thank you very much for your answer.
May you can tell me if i should prepare anything to get the bootloader unlocked again easily or is it the same procedure like requesting the file from mi.com ?
And maybe you can tell me if i can flash eea or global rom aswell as i live in Italy/europe or china is required ?
Click to expand...
Click to collapse
I suppose your BL is unlocked since you were flashing.
You can check in Fastboot:
fastboot oem device-info
Regarding how to flash the fastboot firmwares, see (I didn't use myself):
How to Flash Xiaomi Firmware using MIUI Fastboot and Recovery ROM
Ever since the dawn of affordable smartphones in countries like India and China, the demand for more has increased. The consumers now, more than ever, are
www.getdroidtips.com
Long ago, when I switched from stock to Xiaomi.eu, I switched from EEA (but AFAIK, Xiaomi.eu guides nowhere require to be coming specifically from EEA, Global, China, Russia)
Yeah im unlocked, but if i recognize it correctly flashing stock will lock bootloader again.
Need to do further research tomorrow than if i can prevent that somehow .
Thanks.
Danny94 said:
Yeah im unlocked, but if i recognize it correctly flashing stock will lock bootloader again.
Need to do further research tomorrow than if i can prevent that somehow .
Thanks.
Click to expand...
Click to collapse
Take a look to the screenshot from Mi Flash in the guide, there is the option Clean all vs Clean all and lock
That is a common issue, people leave on default: Clean all and lock and if anything goes wrong while flashing (wrong firmware or something) they hard brick their phones and since they locked them, they cannot flash again (and must ask for the paid EDL support)
zgfg said:
Take a look to the screenshot from Mi Flash in the guide, there is the option Clean all vs Clean all and lock
Click to expand...
Click to collapse
Thank you so much for pointing that out, i surely have missed that.
If i can keep it unlocked may i stay at stock and will do a lot of debloating and optimization as i wont update it .
I have a Redmi Note 10 Pro model M2101K6R which I believe is the Global version.
I bought it used but originally it was from Telcel Mexico.
They have somehow managed to lock out the second SIM slot, via OS or MIUI I'm not sure.
Anyway, I'd like to install a non vendor ROM with the second SIM enabled but without installing a custom recovery or rooting.
Is this possible? If so, can someone point me to a guide?
Thanks in advance
Ple
dwsco said:
I have a Redmi Note 10 Pro model M2101K6R which I believe is the Global version.
I bought it used but originally it was from Telcel Mexico.
They have somehow managed to lock out the second SIM slot, via OS or MIUI I'm not sure.
Anyway, I'd like to install a non vendor ROM with the second SIM enabled but without installing a custom recovery or rooting.
Is this possible? If so, can someone point me to a guide?
Thanks in advance
Click to expand...
Click to collapse
Please write more details why no twrp?
You can flash stock android 11 via PC and miflash if you unlock bootloader and set developer usb Debugging
Laptapper said:
Ple
Please write more details why no twrp?
You can flash stock android 11 via PC and miflash if you unlock bootloader and set developer usb Debugging
Click to expand...
Click to collapse
dwsco said:
I have a Redmi Note 10 Pro model M2101K6R which I believe is the Global version.
I bought it used but originally it was from Telcel Mexico.
They have somehow managed to lock out the second SIM slot, via OS or MIUI I'm not sure.
Anyway, I'd like to install a non vendor ROM with the second SIM enabled but without installing a custom recovery or rooting.
Is this possible? If so, can someone point me to a guide?
Thanks in advance
Click to expand...
Click to collapse
I've been flashing on my last 4 or 5 phones and I'm now ready for a peaceful stress free life
I thought I might be able to flash a stock rom with no extras... Not familiar with miflash yet so I'll go research that. Do you keep OTA if you flash a stock rom or do you have to go manual after the first one?
Also, on the mi.com site it says you can flash from a stock rom to an updated stock rom without unlocking... Is tha not the case?
So, I believe I've figured it out. Sorry for the wasted post but perhaps it will help others. You can download the official firmware from the mi.com site and install it using the local update method.