Related
Hello,
I searched a program for my Kaiser that disconnects a BT device, such as carkit or headset, when a call is finished.
With disconnecting I mean that the device is not connected anymore at that moment.
So when I have an incoming phonecall, I have to push to connect my BT device to my phone. Then I can pick up the phone with my device.
Who knows were I can find this?
Thanks,
Temba
Hmm, I don't see the point.
When an incoming call is received, before it starts ringing the Kaiser will look for a known paired BT device, if it is on but not connected it will connect it automatically. If it's not on at that moment you're out of luck for that call.
Just leave your device connected... you should already have to push on your device to take the call, no?
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Maybe I had to ask how I can unpair a BT device from my phone after a call. But 'unpairing' is for me that I have to enter a pincode every time I want to connect.
Any ideas?
Temba
Hi,
This is an issue between HTC Windows Mobilie devices and carkits equiped with a parrot chip.
As far as I've understood all Windows Mobile 6.1 devices are affected.
I myself have a Kenwood DNX 8220 BT Double DIN Head Unit in the car but there are more Head Units and carkits that make use of the Parrot chip CK5050 if I'm not mistaken.
Does anyone have a tweak or a registry setting that is able to fix this?
I've allready tried to change the COD registry value to: 52020C which is suggested as a solution in a parrot forum topic:
http://www.parrot.com/forums/english/viewtopic.php?id=5620
It didn't solve the issue
tembares said:
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Click to expand...
Click to collapse
Oops, had missed this reply back then. I know it's way old, but as someone brought this thread up again, never know if you might read it...
AFAIK this isn't possible. If you have 2 BT devices, paired and powered on but not connected, when a call is received / placed form the phone it will use the last one that has been either connected or selected and "Set as hands free" in the BT settings. If you want to make sure the phone connects to one of them without you going in the BT settings and set it as hands free, you need to turn the other one off.
Hello!
I bought an SBH20, paired with my XZ via NFC, listened to music, then disconnected the headset, using the NFC.
After a while, i tred to connect again via NFC but all i get is a 'connecting' message, BT turning on -white BT icon- but no real connection, therefore the BT turns off.
After several tries it finally connects, but it's not reliable this way.
I noticed, if i enter to settings(not turning anytihng on/off) and trying to connect (still using NFC), everything works fine: connects, disconnects perfectly, and handles the BT as it should.
I've reseted the headset, tried single and multi point modes aswell. Deleted the BT devices, then repaired, still got the problem.
Am i doing sth wrong? I want to connect and disconnect the headset with a simple touch, and not toggling the BT manually (NFC yeah...) Is this something, SBH20 is not compatible with?
(btw sony support says: "For subsequent connections between devices that have already been paired once, make sure that Bluetooth™ is turned on so that the devices can connect automatically." If it's a "must" , then what is the [email protected] use of the NFC??? Just to pair once???)
Please share your experiences! Any advice would be greatly appreciated!
Thanks for reading ( and sorry for my english)
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
fl4r3 said:
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
Click to expand...
Click to collapse
It is a real shame... In my case it's the opposite, if i touch the headset to disconnect, the next nfc-connect tends to be less successful.
(and i noticed that it also matters if i turn off the headset after disconnected, or not)
And what is really odd, that i don't have to do anything in the settings menu ( or bluetooth settings) just open it, and everything works like a charm...( all connect or disconnect tries are succesfull, no exception, even if i push the headset repeatedly to the pohone's back)
I'm not affraid to mod some system files, apps, maybe build.prop tweaks, but i don't know where to start. In bulild.prop there are only a few nfc related lines (tried to enable/disble those)
So i'm not alone...maybe even more people are in the same boat, trying to solve this.
Again; any related info is welcome
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
swtam said:
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
Click to expand...
Click to collapse
Well, then we don't have the same issue. I tought i could use the nfc for connect/disconnect (i actually still think it is capable of that, just sony messed up sth)
Could you try to connect/disconnect and connect again with your devices, please :angel:
I'm really curious about this whole nfc story ( why does the headset have the chip/tag if it only works for initial pairing -its not a big deal to pair manually, especially that it has to be done just once-, and on the other hand: if i put nfc in the device, why not put in this functoin too- not a big deal: a proper working BT toggle, but it brings a tad more functionality-
Hi guys,
In my car, I have a Kenwood Kdc-w4737u radio with bluetooth module Kca-bt100.
Allow me to explain what happens after pairing:
1. Bluetooth ON: When turning bluetooth on, S4 pairs and says "in call" (ghost and muted call), although no call and no app is actually running...
2. Temporary fix: Making a phone call actually solves this problem and S4 starts behaving like it should.
3. After the fix, while on Radio/CD/USB, I receive a phone call that goes through bluetooth, end call goes back to radio/cd/usb.
4. Start Navigon GPS, similar problem like in 1. Navigon seems to open a dedicated audio channel that never goes to sleep. Stays silent when no audio directions are playing instead of going back to Radio/CD/USB.
On my Iphone 4 I do not have any of these issues. Turning Bluetooth on does not start a ghost muted call. While on Radio/CD/USB, receive a phone call activates bluetooth, end call goes back to radio. Same with Navigon GPS, new voice directions activate bluetooth, when voice instructions ends, goes back to radio/cd/usb. Perfect.
I already know that the bluetooth on S4 is the latest chip and version and etc, what I would really like to know is if anyone got a fix for this, I have tried a few apps that control bluetooth in the app market and none works.
Thanks in advance.
If you have an S4 and not the S4 Active, you are in the wrong forum.
terrix said:
1. Bluetooth ON: When turning bluetooth on, S4 pairs and says "in call" (ghost and muted call), although no call and no app is actually running...
2. Temporary fix: Making a phone call actually solves this problem and S4 starts behaving like it should.
Click to expand...
Click to collapse
Hello,
I have the exact same problem from a few days with my car bluetooth system and my S4 (previously it was working flawlessly), did you solved? or at least found something about it?
Thanks
not really
I have given up on my galaxy S4 and went back to iphone 4. Galaxy over time presented too many random bugs with too many of my daily tasks.
If you make a phone call immediately after connecting the bluetooth, the issue is gone UNTIL you disable bluetooth. Next time you turn bluetooth on you will have to repeat the process.
Over time (after a few weeks) I never got THIS issue back, so I never had to make a quick call for it to behave normally.
Also note that Galaxy S4 has a newer bluetooth version, and most car players have the 2.0, which I believe to be the cause of most issues.
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
I previously owned a Sony Z3v and had no complaints. I run and workout regularly so I often use bluetooth headphones while doing so. These in particular http://www.plantronics.com/us/product/backbeat-fit. I'm been having issues since day 1 with these disconnecting. I have to power them down and power them up again to reconnect. Even when they lose connection, they show they are connected but are non responsive. I had not trouble whatsoever with my sony experia.
Anyone else having these kind of issues? I've checked the forums and I don't see any reports. Is this isolated?
I only use Bluetooth when I'm in the shower with the beats pill but it works great for me.
Sent from my SM-G925V using Tapatalk
Not entirely related but I have had issues with my original Galaxy Gear disconnecting somewhat frequently when I disconnect my BT head unit or at other seemingly random times that sometimes require me to turn BT off and on again. It's not that huge of an issue usually but BT on my S6 is not perfect for sure.
Sent from my Galaxy S6 Edge
I am having Bluetooth disconnect issues with my car. Will connect and disconnect repeatedly for about 7 minutes and then stay connected. Very annoying. Have tried several fixes but nothing has worked.
I haven't had an issue with mine when using it for my gopro.
The issue is with Android using Bluetooth 4.0 and WiFi simultaneously. I've had these issues since owning the phone. For whatever reason if you connect your phone to a bluetooth speaker where both devices are BT 4.0, the WiFi will be extremely slow or not work at all.
If you don't believe me, try it. As soon as you connect the device, try to load something like a video or song over WiFi. Or even send a Facebook message. It'll stall. As soon as it stalls, turn off WiFi and it'll magically start working again over cellular data.
No issues here, usually stream to a Bose Color Sound device, getting connection through WiFi
I have issues with mine pretty regularly with my car. A reboot of the phone will sometimes fix it. It's annoying, sometimes it will disconnect from audio but not phone or vice versa. Or it will work perfect, I'll get a phone call and it all goes to crap. The remainder of the drive will generally result in fighting with it. Maybe it will reconnect, but most of the time it won't. Never have I had a phone with so many bluetooth issues.
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Deuces said:
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Click to expand...
Click to collapse
Stopped working again.