trying to go from COG to PER
and am trying to go to stock using ODIN 1 click from http://www.youtube.com/watch?v=UDtxnH4lFuk to go to 2.1 stock...
i instaled the X64 drivers, the ODIN does work at first, and the adb comands work
first when i'm in debug mode and phone is one, i plug it, odin recognize it and is yellow.
then i do "adb reboot download" the phone goes to download mode, odin adds it then removes then adds again and removes
what to do?
iakovl said:
trying to go from COG to PER
and am trying to go to stock using ODIN 1 click from http://www.youtube.com/watch?v=UDtxnH4lFuk to go to 2.1 stock...
i instaled the X64 drivers, the ODIN does work at first, and the adb comands work
first when i'm in debug mode and phone is one, i plug it, odin recognize it and is yellow.
then i do "adb reboot download" the phone goes to download mode, odin adds it then removes then adds again and removes
what to do?
Click to expand...
Click to collapse
Layer 1 first. Try a different USB port, try a different USB cable.
switched cable switched port
now it "add remove" on normal connect but when in download mode it looks stable
worry that if i start the ODIN it will brick the phone it if"add remove" itself agin
and i was right... add remove again on ID 5 in download mode
the thing i dont get is that in storge mode it works fine... backuped right now 1.4G of data without problem
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
tried another cable?
disable signature verification
efaustino84 said:
tried another cable?
disable signature verification
Click to expand...
Click to collapse
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
saadiko said:
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
Click to expand...
Click to collapse
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
efaustino84 said:
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
Click to expand...
Click to collapse
I've tried many files (I can take the microSD and load files in the computer). But when I start the recovery mode and select external storage, it seems to work, until it arrives to that signature message.
Yes, my i8190n is working as good as Spain in the world cup.
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
xXPR0T0TYPEXx said:
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
Click to expand...
Click to collapse
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
saadiko said:
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
Click to expand...
Click to collapse
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
xXPR0T0TYPEXx said:
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
Click to expand...
Click to collapse
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
saadiko said:
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
Click to expand...
Click to collapse
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
tys0n said:
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
Click to expand...
Click to collapse
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
If there are no other way then try JIG USB if you think it will work
xXPR0T0TYPEXx said:
If there are no other way then try JIG USB if you think it will work
Click to expand...
Click to collapse
I'm not sure if it will work, but it's the last thing to try.
I have made an order of the jig USB, and it is supposed to arrive in 20 days (less than 2$ and free shipping). Until then, must wait... I'll will tell you if it works or not.
Thanks!
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
tys0n said:
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
Click to expand...
Click to collapse
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
saadiko said:
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
Click to expand...
Click to collapse
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
tys0n said:
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
Click to expand...
Click to collapse
It's what I supposed, but it's a way to try if USB connection works (not 100% but if it doesn't work I will know it's a hardware problem)
I've tried uninstall Kies and install samsung drivers, I've cleaned the dust in the usb, but I don't understand what I have to do with the plastic, is the same plastic to keep food fresh? must put it on the usb?
not working yet
my USB JIG has arrived and I have tried it... and still doesn't work. Yes, it starts the download mode, but when I plug the USB to try something, the computer (ODIN) doesn't do anything. I have tried with my wife's phone and it works, it's a i 8190n, too.
I'm not going to try anything more, YOU WIN THIS TIME i8190n!
Hi, I have the same problem with my GT-8190, but it happens after my phone drop onto water..
charging is work, but it say "USB device Not Recognized" when I try to connect with PC..
now i want back to stock rom, but I can't do it if my phone not recognized to PC.
Do you have an idea how to flash official stock rom without PC(Odin)?
Sorry for my English
Okay so i did something dumb and I'm wondering if there is a way out. I just got my second Note 5 because I dropped my first one and the screen went black. It was gonna be cheaper and easier to just buy a new device than actually repairing all the damage.
I installed TWRP through Odin. Stupidly, I did a complete wipe, including internal storage, and now I can't get the device to see the USB/OTG. I have a new cable on the way that's going to get here tomorrow. I can't think of what else it could be? Any ideas would be much appreciated. It doesn't have an OS so I'm thinking I may have wasted 250$.
It's not turbo charging either so could It be the charging port that's causing it to not be picking up the OTG?
Does Odin recognize it at least in download mode?
Have you tried mount on as usb in twrp?
press install>select storage then there will be two option
Internal storage and USB storage. Click on USB and the value will change from 0 to the amount of gb your otg have,then you can flash via otg
CoontDunker23 said:
Okay so i did something dumb and I'm wondering if there is a way out. I just got my second Note 5 because I dropped my first one and the screen went black. It was gonna be cheaper and easier to just buy a new device than actually repairing all the damage.
I installed TWRP through Odin. Stupidly, I did a complete wipe, including internal storage, and now I can't get the device to see the USB/OTG. I have a new cable on the way that's going to get here tomorrow. I can't think of what else it could be? Any ideas would be much appreciated. It doesn't have an OS so I'm thinking I may have wasted 250$.
It's not turbo charging either so could It be the charging port that's causing it to not be picking up the OTG?
Click to expand...
Click to collapse
You need to flash latest stock 6.0.1 firmware on your device using Follow the steps
1)Go to link provided to download latest 6.0.1 firmware for your device model no and country( You can find device model no and country printed on authorised box or below on the back panel of your device like SM-N920C/G/I, Country code you can find on box like INS,SL,UK)
https://www.sammobile.com/firmwares/
2) Download latest odin from google and latest Samsung usb drivers from your device( Copy them on your pc and extract to specific folders, install Samsung usb drivers on pc)
3)Power off your device, now press volume down+home+power button simultaneously, you will now boot into download mode. Press volume up button to continue)
4) Run previously extracted odin.exe on your pc as administrator
5) Connect your phone using original Samsung usb cable, now let pc to install usb drivers for your device..After drivers being successfully installed, you can see your device is added to odin as COM PORT
6)In odin options tab, make sure only auto reset and reboot options selected..Dont select reset partitions from odin..
7)Now add previously extracted firmware in AP tab of odin( In extracted firmware folder, file is named as tar.md5)
8)Give it some time to b ready and now press start button,now flashing is started..Wait untill flashing process being completed..
9) After flashing complete your phone will be reboot automatically..if you stuck at Samsung logo for long time, press volume down+power button..Your phone will be switched off, now immediately press volume up+power+home button simultaneously untill you see Samsung galaxy note 5 logo
10) Now you will boot into stock recovery, from there select wipe data/ factory reset option..After reset reboot your device..Your problem will be solved..
REMEMBER TO DOWNLOAD LATEST STOCK 6.0.1 FOR YOUR DEVICE
Great, I'll try to do that later today. Thanks a lot!
DroidHackeR said:
You need to flash latest stock 6.0.1 firmware on your device using Follow the steps
1)Go to link provided to download latest 6.0.1 firmware for your device model no and country( You can find device model no and country printed on authorised box or below on the back panel of your device like SM-N920C/G/I, Country code you can find on box like INS,SL,UK)
https://www.sammobile.com/firmwares/
2) Download latest odin from google and latest Samsung usb drivers from your device( Copy them on your pc and extract to specific folders, install Samsung usb drivers on pc)
3)Power off your device, now press volume down+home+power button simultaneously, you will now boot into download mode. Press volume up button to continue)
4) Run previously extracted odin.exe on your pc as administrator
5) Connect your phone using original Samsung usb cable, now let pc to install usb drivers for your device..After drivers being successfully installed, you can see your device is added to odin as COM PORT
6)In odin options tab, make sure only auto reset and reboot options selected..Dont select reset partitions from odin..
7)Now add previously extracted firmware in AP tab of odin( In extracted firmware folder, file is named as tar.md5)
8)Give it some time to b ready and now press start button,now flashing is started..Wait untill flashing process being completed..
9) After flashing complete your phone will be reboot automatically..if you stuck at Samsung logo for long time, press volume down+power button..Your phone will be switched off, now immediately press volume up+power+home button simultaneously untill you see Samsung galaxy note 5 logo
10) Now you will boot into stock recovery, from there select wipe data/ factory reset option..After reset reboot your device..Your problem will be solved..
REMEMBER TO DOWNLOAD LATEST STOCK 6.0.1 FOR YOUR DEVICE
Click to expand...
Click to collapse
AndiValon said:
Have you tried mount on as usb in twrp?
press install>select storage then there will be two option
Internal storage and USB storage. Click on USB and the value will change from 0 to the amount of gb your otg have,then you can flash via otg
Click to expand...
Click to collapse
I tried to mount it in TWRP but the box is uncheckable. That is my problem. I go to install and under the select storage I cant select USB OTG and it says (0MB). I'm kinda perplexed. Thanks for the advice though!
DroidHackeR said:
You need to flash latest stock 6.0.1 firmware on your device using Follow the steps
1)Go to link provided to download latest 6.0.1 firmware for your device model no and country( You can find device model no and country printed on authorised box or below on the back panel of your device like SM-N920C/G/I, Country code you can find on box like INS,SL,UK)
2) Download latest odin from google and latest Samsung usb drivers from your device( Copy them on your pc and extract to specific folders, install Samsung usb drivers on pc)
3)Power off your device, now press volume down+home+power button simultaneously, you will now boot into download mode. Press volume up button to continue)
4) Run previously extracted odin.exe on your pc as administrator
5) Connect your phone using original Samsung usb cable, now let pc to install usb drivers for your device..After drivers being successfully installed, you can see your device is added to odin as COM PORT
6)In odin options tab, make sure only auto reset and reboot options selected..Dont select reset partitions from odin..
7)Now add previously extracted firmware in AP tab of odin( In extracted firmware folder, file is named as tar.md5)
8)Give it some time to b ready and now press start button,now flashing is started..Wait untill flashing process being completed..
9) After flashing complete your phone will be reboot automatically..if you stuck at Samsung logo for long time, press volume down+power button..Your phone will be switched off, now immediately press volume up+power+home button simultaneously untill you see Samsung galaxy note 5 logo
10) Now you will boot into stock recovery, from there select wipe data/ factory reset option..After reset reboot your device..Your problem will be solved..
REMEMBER TO DOWNLOAD LATEST STOCK 6.0.1 FOR YOUR DEVICE
Click to expand...
Click to collapse
I'll just do that and start over. Thanks for the advice!
Jdkrosen said:
Does Odin recognize it at least in download mode?
Click to expand...
Click to collapse
I'm not sure. How can I tell?
CoontDunker23 said:
I'm not sure. How can I tell?
Click to expand...
Click to collapse
Step 3 from the other guy's post above you. That's what I was gonna help you with because you wiped the internal storage. Odin will still recognize it but in Download mode and she won't work again unless you flash the stock firmware specifically for your phone from the link above.
Fixed
I reOdined and same problem so I went back and looked at the instructions. I saw that you had to have MM flashed onto the device so I tried that and it worked. I just figured updating the phone would give me enough but it didn't. Thanks for all the help guys!
Hello,
I have read many posts, very interesting but no solution of my trouble.
My phone does not boot.
I have tried a factory recovery, nothing.
I have installed the USB driver, the ODIN. I tried to communicate through ODIN with different stock ROM, different ODIN versions, USB drivers and computer, nothing.
Maybe the reason is that the settings of the phone is not set to accept downloading through USB port.
What is your opinion?
Thanks
for information the configuration is
phone samsung galaxy N7000GSMH,
windows8,
USB_Drivers_1.5.27.0,
odin V3.09, V3.10, V3.12
ROM N7000XXLRI_
Se
Pleaze, does anyone have an idea?
I read that I should enable the usb debug in my device, but the phone is stuck in the boot....
Please help
Can you enter the recovery mode ?
I have the same sort of issue. My current phone just bricked itself, so I reached into the closet and pulled out my old GT-N7000, only to find it won't boot. Only the initial boot screen is displayed.
Charging mode works, and I can get it into download mode , - but not recovery. Odin recognises the phone, though not consistently. When I try to flash a stock ROM via Odin, with or without repartitioning (PIT file), Odin begins the operation and just stalls indefinitely.
Does this indicate hardware failure?