Database Develop

help help!!! stuck in rooting....

hi all ia have this galaxy s2 gt 1900 g indian version ..
i read this article to easily root i follwed it to the t below steps..my version is 2.3.3 XWKH8(or was it xwkdd..forgot..hell)
"Tools Needed:
ODIN Downloader (Download it from here)
USB Data Cable
XWKDD Kernel (Don’t extract it after download, it will use in the Odin process)
Download SuperOneClick
Download Samsung’s KIES 2.0 (Download links: Link1 , Link2 )
And Ofcourse, A Personal Computer(PC) or Laptop.
Procedure:
Step one: First of all make sure that you have download and install all the needed software. Then, Put device in USB debugging mode: Settings ->Applications -> Development -> USB debugging.
Step Two: Reboot your device in the download session mode. To get enter in the download mode of Samsung Galaxy S2, switched off the device and turn it on again by holding Volumedown button + Home button and Power button simultaneously. You will surely reach to the download mode. You can get yourself confirm by identifying same as below mention picture as on your phone screen.
Step Three: Open the ODIN Downloader which you had downloaded and installed it on your pc.
Step Four: Now, with the help of USB Cable connect the device to the computer while keeping the Odin open then wait for the few seconds then odin notified you that the device is connected to the computer. Select the checkboxes next to “Auto reboot” and “F. Reset Time” and kept default else options. After all this, press “PDA” Button and select the XWKDD_insecure.tar file which you have downloaded on your pc before.
Now Press “Start” button, after this pressing the start button ODIN will flash the kernel and after flashing it phone will reboot."
>>> however the phone is not booting...its getting stuck in samsung logo with yellow traingle below...wht could be wrong
pls help
i again went in dowlnloading mode..it says custom binary download: yes (3) counts,..i treid odin 3 times mayb bcoz of that

I think you're lost.
This is the forums for Galaxy S1 GT-I9000
The Galaxy S II I9100 forums can be found here: http://forum.xda-developers.com/forumdisplay.php?f=1055

Solution: Recovering from soft brick

I faced a unique problem today...
1. Got a notification to update Super Su
2. After updating, went to the app and it asked for updating binary...clicked Ok
3. Asked which method to use- Normal or CWM/TWRP...clicked CWM/TWRP
And all hell broke loose...the phone rebooted and kept stuck at Samsung GT-N7000 screen
Tried booting into recovery using the Vol Up+Menu+Power Button but failed to boot into recovery and always booted in the same GT N7000 screen
In short my custom recovery was messed up...
The above may not be a huge problem for people frequenting these forums and having basic google search finesse, but still it took me more than 3 hours to un-brick my phone after trying several combinations and permutations, so to the benefit of other members here's my simple solution:
1. Check if you can get into download mode by using Volume Down+Menu+Power Button
2. If not, your problem might be more serious and you should keep searching for a solution...best of luck!
3. If you can get into download mode, fine ...lets continue...
4. Prepare your PC for flashing a custom recovery via PC Odin:
a. Download PC Odin: I used Odin 3 V 1.85
b. Download a custom recovery: I used Philz 5.03
c. Uninstall Kies and Samsung Drivers from your PC (do it, it worked for me!)
d. Install latest Samsung Drivers afresh
e. Eject and physically remove all USB connected devices from your PC
f. Disable any antivirus software
5. Now get to download mode on your handset- after Volume Down+Menu+Power Button- on the next screen press Vol Up key to enable download mode. Do not connect phone to PC yet.
6. Run Odin as administrator. Let the app window come up on your screen.
7. Connect the original Samsung USB cable to the USB port at the back of your PC- this is to ensure it gets connected to the motherboard USB slot directly- please do this- critically important- at least in my case. For a laptop, I guess any port will do.
8. Connect your phone to the PC using USB cable
9. The ID:COM indicator on the PC ODIN window should turn yellow in a few minutes
10. Do not click on any buttons on ODIN Window- Auto-Reboot and F.Reset Timer should be checked and everything else should be left unchecked.
11. Click on PDA tab on ODIN and browse to the custom recovery tar file, select it- it should now appear under PDA tab.
12. Click on start and let ODIN do its thing...
13. Disconnect the phone after successful reboot.
The above steps helped me recover my soft-bricked phone.
I understand you should follow the steps verbatim to use this method...believe me I have tried several iterations- using front USB port, trying without disconnecting all other devices from USB port, without uninstalling Kies, et al...and failed everytime.
I hope this helps you.
:good:

Help me Pls.

Sorry for this thread.
MY ENGLISH NOT GOOD. :crying:
I Follow " http://forum.xda-developers.com/showthread.php?t=2392865 ".
1. Flash 10.1.1.A.1.310 with all Wipes using flashtools (All data will be erased.)
2. Obtain Root using the toolkit.
3. Flash this Recovery to your device.
4. Download the System only Rom and put it on the sd-card.
5. Go into Recovery (when the press "Volume up" when the blue LED lights up)
6. Search for the previously downloaded System only Rom file and flash it in CWM recovery .
7. Boot into flash mode (when booting from USB-connected cable to press "Volume down")
8. Flash 10.3.1.A.0.244 through FlashTool without system (tick the box Exclude) / / After loading you will have the new firmware./ /
9. Flash Recovery again.
10. Download the latest version SuperSU (at the bottom of the link to the zip file), add this file to the sd-card.
11. Go into Recovery, flash the archive SuperSU / / After loading you will have the new firmware with the normal working Root privileges./ /
I have proplem with step 7 and 8.
In step 6. I setup Rom from SD Card and reboot and Unplug the device.
When My phone Reboot. I open Flashtool -> Selec Firmware Russ 10.3.1.A.0.244 -> UnTick DATA, CACHE, APPSLOCK and tick all the box Exclude -> Click Flash -> Press Volume down my phone + Plug USB cable with Laptop -> When Flash Finish, Unplug device and press PoWer .... My phone die on LOGO sony.
Help me PLS.
IF Thread not post here, i sorry admin. => New member.

Anyone help me..?
Help me pls..!!!!1 :crying:

SonyZR said:
Help me pls..!!!!1 :crying:
Click to expand...
Click to collapse
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:

Normal
jackman17 said:
I also tried to follow the instructions above and now phone is dead!
Does not start up , not even sony logo.
Please help.:crying:
Click to expand...
Click to collapse
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.

SonyZR said:
Step 1 : Open your Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
2 : Now, You Hold Volume Down and conection cable with ur computer. ( If your computer search driver for your phone, Flashtool will be error, but your computer has driver your phone )
3: Close table flashtool and unplug cable.
4: Open again Flashtool and selec any FW 4.1.2 or 4.2.2 Click Flash. When your computer repair FW, One table warring open.
5: One moretime Hold Volume Down and conection cable with ur computer. Your computer will be flash FW on your phone =>
6 : When finish , unplug cable and hold power. => Done
Sorry. my english not good.
Click to expand...
Click to collapse
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?

Yes.
jackman17 said:
My phone does not not boot up, it is not recognised by FlashTool anymore.
When I push power button , only red led at the bottom of phone blink a couple of times en then nothing.
Is there any other way.?
Click to expand...
Click to collapse
Do you have try my tutorial.?
If my tutorial not success
And you can not login logo sony
I think your phone has brick. You need go to warranty center.

tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:

jackman17 said:
tried your tutorol, but fkashtool does not see phone when connect.
I think I have to buy new one.:crying:
Click to expand...
Click to collapse
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.

djpeesh said:
Pull your battery out. Run the flashtool, click the lightning button and flash in fastboot (the first option) and then select the ftf file for 4.1.2 or 4.2.2 (there's a thread in the development section with the FTF files).
Flash (and leave the boxes as they are ) --> Once it prepares the phone for flashing, it will ask you to to connect the phone in fastboot mode.
DONT TOUCH THE POWER BUTTON
Hold the volume down button while plugging in the cable. It should flash.
Let me know if it worked.
Click to expand...
Click to collapse
fastboot is the second option in my flashtool menu, which should i choose?
ps and should I leave battery out?

THANK YOU DJpeesh,
you saved my day:fingers-crossed::fingers-crossed:
followed your instructions ( 1e option flashmode with battery still removed ) an successfuly flashed phone.
I think it went wrong when I flashed boot.img file from cmw recovery with fastboot from cl when phone was also still connected throw Flashtool.
I use all linux tools (flashtool, adb, fastboot , doomlord-rooting kit)
ps By your opinion, is it still save to follow intructions on the link in my first post to get my xperia zR on latest firmware and have root access?

Jackman17. Try updating through Sony update service and then use vroot (can send you thread link later).
I'm running 4.2.2 and I'm rooted.
Sent from my C5502 using Tapatalk 4

[GUIDE] [UNBRICK]LG Magna H502F Stock Rom

Your LG Magna(H502) stuck on lg logo or bootlooping follow this guide to fix your device
Requirements:
USB Cable
LG Driver
LG FlashTool
MegaLock.dll
H502F Stock ROM
Let's start
1.Install the LG Driver
2.Install LG FlashTool and don't run it yet
3.Copy MegaLock.dll and replace in the folder LG FlashTool (C:\LG\LGFlashTool)
4.Turn off your device(remove battery and put it back to be sure its off)
5.Press and Hold the Volume UP button,plug in the USB cable and hold until you see "Firmware Update" you are now in download mode
Don't plug into usb 3.0 port and try other ports if getting issues
6.Open Device Manager on your PC
Go on "Ports (COM & LPT)" if the driver is installed properly, you will see "LGE Mobile USB Serial Port (COMxx)"
We need to change the COM port number to 41
Double click on "LGE Mobile USB Serial Port"
Go to Port Settings Tab and click Advanced
Change COM Port Number to COM41 and click OK
Disconnect USB cable,wait a few seconds and reconnect or reboot back in download mode to check if the drivers are working properly
7.Open LG FlashTool as admin
Tick the Select Manual Mode box
Extract LG Magna H502F.rar
Click the DLL "....." button and select the DLL found in the extracted folder(LGH502f_20150416_LGFLASHv190.dll)
Click the S/W add button and select the file with the .tot extension(LGH502fAT-00-V10a-CIS-XX-MAR-16-2015+0.tot)
Don't touch anything else and press ok
Flashing will format the phone all data will be lost
8.Click on the Yellow Arrow Button at the top left and it will start the flashing process
When you see ready in a few seconds you will be asked to disconnect and reconnect the cable and it will start flashing
It will take some time
During the flashing process, the phone will reboot itself and will display "MiniOS Factory Reset Status".Don't worry about it
When you see pass in FlashTool and Factory Reset Status 3 on your phone means the flashing process is completed
Disconnect the cable and remove the battery
Power on your phone and enjoy your working phone again (Don't forget to disconnect USB cable else if you didn't close the FlashTool it will go back in download mode and flash again)
Fixing problems
Factory Reset Status 2 and download fail
Method 1
1.Disconnect the cable and take out the battery after some seconds insert back
2.Press and hold both the power button and the volume down and hold until LG logo appears release the buttons and immediately press and hold both buttons again to go in Factory Reset
3.Choose Yes, then Yes again, the phone will reboot
Method 2
1.In step 7 where we are setting up the FlashTool change the action mode to Board DL instead of Upgrade DL
2.When the flashing is done your phone will reboot to the AAT Screen
3. Hold down power button and press normal boot (+power) your phone will reboot. (dont forget to disconnect usb cable or close the FlashTool)

LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Install LG Drivers from here : https://sourceforge.net/projects/avicohh/files/Android/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe/download

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Try installing the driver when you are in download mode or try other ports in your computer.If it still doesn't work try this driver http://oceanhost.eu/x1b0tjlhzw1z/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe.htm

May the stock ROM work with h500f ?

Geralt1232 said:
May the stock ROM work with h500f ?
Click to expand...
Click to collapse
Nope

is this v10a? which ROM can be rooted and TWRPed?

xd
as I can install the KDZ I have the LG H502G And not catch any of that model Dll !! Help!!​

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
You have to enable "Show hidden devices"

I lost data connection often when playing games or using any app can this problem solved by installing stock rom again? Plzz tell me the solution

Trying to get rid out TWRP
If I ever flash stock firmware, does custom recovery/TWRP be removed ?

yes.it will be replaced with stock...
Sent from Valhalla

Lg magna
My lg magna is not booting.
I tried installing a custom ROM it showed that it was done but its not booting now. Its not even booting to recovery mode. I've not tried flashing the a ock ROM but will it work.will it boot in download mode?

go to view option appear on that window and click on 'show hidden devices'
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Reply::go to view option appear on that window and click on 'show hidden devices'

Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks

Aneom7331 said:
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Click to expand...
Click to collapse
https://lg-firmwares.com/lg-h500f-firmwares/
just find the country you are in.

I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying

Aneom7331 said:
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Click to expand...
Click to collapse
yes. it will )

Hi, I'm in the same situation as Aneom7331, indeed I have a bricked LG Magna H500F and I'm trying to flashing a stock firmware. Where should I put the .kdz file in the lg flash tool 2.0.1.6? Moreover, the .kdz file has not a .dll file together with it, Thanks in advance

Someone have link to stock for h502y?

Wrong file TWRP

Hi,
After install TWRP from Odin my Note 9 was stay on bootlop 'Samsung Logo' and restarting, i can't go to Download Mode and Recovery but phone only restarting bootloop.
It happend after install wrong twrp files (\twrp-3.3.1-1-star2qltechn.img.tar) i have select on Odin "Rebooting"
What's going now? Regards Thank you for help
Recovery and Download doesn't work, i can't going to him.... only restarting *****
VIDEO: https:// streamable.com/k242c

You may have to try restore stock firmware using odin. Did u try this method to get into download mode? Disconnect the USB cable from ur phone but keep the cable plugged into your computer. Then hold down Bixby+Vol Down and then plug the usb cable in.

Its not possible but before install wrong twrp i has selected options "Nand erase" and "Auto Rebooting"

OK...
Not to be a ****, but.....
Welcome to Bricksville, population - you...
IF, and it's a big if, you can get your hands on a download mode dongle it might, not 100% sure, but just might get you into download mode if you haven't deleted the bootloader completely...
You will need a micro-usb to usb c dongle as well...
I haven't tried this on my Note 9 but it might work...
Then you should be able to flash stock rom (make sure it is your stock rom with matching CSC and everything) through ODIN, DON'T tick NAND erase as this might/will delete your IMEI (if you haven't done so already)...
Good luck...