Related
my A2 Converted to 6X stuck in bootloop after making a BackUp by PitchBlack, It wont boot in System nor Recovery anymore,
what should I do?
if I try to go to recovery it turns off,
and if I connect charger cable it turns on and off repeatedly (each 2-3 secs)
Keep force rebooting by holding down the power button and volume up button continuously / connecting the charger multiple times until you manage to get into recovery mode (I tried it for over 5 mins and it will eventually work for sometimes).
Then flash the latest Wayne (6X) firmware (download in Xiaomi Firmware Updater's website), it fixed that situation for me.
I reflashed recovery by fastboot, and reboot it by command line, it boots, but if I restart the phone the problem occurs again,
sz.hatef said:
I reflashed recovery by fastboot, and reboot it by command line, it boots, but if I restart the phone the problem occurs again,
Click to expand...
Click to collapse
Yeah, it was the miui eu rom firmware problem. Some ppl, including me, fixed the issue by flashing latest wayne firmware in recovery.
MarcusMario0605 said:
Yeah, it was the miui eu rom firmware problem. Some ppl, including me, fixed the issue by flashing latest wayne firmware in recovery.
Click to expand...
Click to collapse
could you please share the link of the latest wayne firmware here?
sz.hatef said:
could you please share the link of the latest wayne firmware here?
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
MarcusMario0605 said:
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
Click to expand...
Click to collapse
I flashed the Stable One, now when it boots it does not show the Unlocked message !
is that mean that my bootloader is locked again??
the fastboot says: (bootloader) unlocked:yes
Bootloader is still unlocked despite you flashed the firmware since flashing firmware will definitely not lock the bootloader. (probs. the perk of miui 11 eu roms, i'm not sure)
MarcusMario0605 said:
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
Click to expand...
Click to collapse
I have converted my a2 to 6x.. Will it be okay if i flash the zip without deleting firmware updater folder! I already triggered arb 4. In xiaomi eu rom camera doesn't work at all! So i have to use custom roms! Camera is fine in custom rom! And should i wipe my vendor too? Before flashing the zip?
I flash weekly roms of xioami.eu and camera just works fine, ( and I don't delete firmware folder) why do you want to delete it while you have already triggered ARB?!
Mozahid007 said:
I have converted my a2 to 6x.. Will it be okay if i flash the zip without deleting firmware updater folder! I already triggered arb 4. In xiaomi eu rom camera doesn't work at all! So i have to use custom roms! Camera is fine in custom rom! And should i wipe my vendor too? Before flashing the zip?
Click to expand...
Click to collapse
It is okay if you don't delete firmware update folder since you already triggered the arb 4.
And don't wipe your vendor if you are going to flash that zip, since that zip only contains firmware files.
sz.hatef said:
I flash weekly roms of xioami.eu and camera just works fine, ( and I don't delete firmware folder) why do you want to delete it while you have already triggered ARB?!
Click to expand...
Click to collapse
Last time i flashed with firmware updater folder my phone bricked and triggered arb 4! And after that i recovered it any how! Now in eu roms camera doesn't work at all!
Mozahid007 said:
Last time i flashed with firmware updater folder my phone bricked and triggered arb 4! And after that i recovered it any how! Now in eu roms camera doesn't work at all!
Click to expand...
Click to collapse
I think you miss something , if your bootloader is unlocked, when you flash the whole ROM intact it should works perfectly, but sometimes shifting from stable to beta could lead to boot loop, you need to wipe system , davilk, and cache partitions
MarcusMario0605 said:
It is okay if you don't delete firmware update folder since you already triggered the arb 4.
And don't wipe your vendor if you are going to flash that zip, since that zip only contains firmware files.
Click to expand...
Click to collapse
Okay thanks a lot! Gonna try it very soon...
Hi,
I was using PE+.
decided to try Masik 16.1 MIUI 12
flashed and booted successfully.
Then tried to disable system apps in Masik ROM, and disabled Security app too !!!
after that settings was crashing every time !
so tried to install MIUI Global 12.0.2 using platform-tools folder method ( flash_all.bat )
after double clicking flash_all.bat file it shows me error in cmd like ,
"Current device antirollback version is greater than this package"
"antirollback check pass"
"Mismatching Image and device"
and cmd closes automatically.
flashed PE+ again
what precautions should I take from now if I want to flash MIUI ROM again ??
Thanks
I think you flashed the wrong firmware. Maybe it was for mi 9t
IoIam said:
I think you flashed the wrong firmware. Maybe it was for mi 9t
Click to expand...
Click to collapse
ummm...
don't know,
I made necessary changes in ZIP file
means, changed codeName in updater-script file so it wont give me that "codename = rephael" error...
I disabled security app in Masik then this all happened !
Zip file...?? It should be a .tar then extract it, another compressed file, extract that and you should get a normal folder. Then you select that folder with the mi flash tool
Edit: also never disable security app on miui, no matter the rom
IoIam said:
Zip file...?? It should be a .tar then extract it, another compressed file, extract that and you should get a normal folder. Then you select that folder with the mi flash tool
Edit: also never disable security app on miui, no matter the rom
Click to expand...
Click to collapse
Yea !
also never disable security app on miui, no matter the rom --> I guess this was the mistake !!!
Yes, I was flashing MIUI 12.0.0.2 from platform-tools folder using flash_all.bat file...
didn't try MI-Flash though...
rasik107 said:
Yea !
also never disable security app on miui, no matter the rom --> I guess this was the mistake !!!
Yes, I was flashing MIUI 12.0.0.2 from platform-tools folder using flash_all.bat file...
didn't try MI-Flash though...
Click to expand...
Click to collapse
If you don't need to recover from a brick or driver errors don't bother, I find it easy to use though so next time maybe try that and don't change files. Flashing ROMs through recovery should work, does it not work?
IoIam said:
If you don't need to recover from a brick or driver errors don't bother, I find it easy to use though so next time maybe try that and don't change files. Flashing ROMs through recovery should work, does it not work?
Click to expand...
Click to collapse
Didn't try to flash MIUI 12.0.2 Recovery ROM !!!
if something happens !!! (don't want to brick my device as I bought it just 15-20 days ago ! )
I flashed PE+ again...
no worries ! will stick to PE+
rasik107 said:
Didn't try to flash MIUI 12.0.2 Recovery ROM !!!
if something happens !!! (don't want to brick my device as I bought it just 15-20 days ago ! )
I flashed PE+ again...
no worries ! will stick to PE+
Click to expand...
Click to collapse
If you ever want to switch back to miui I recommend sticking to custom miui versions, mortal os for example should be debloated as is. Just don't remove anything else or if you do use the ADB debloat tool as it has got a safe list of apps you can remove without damage
IoIam said:
If you ever want to switch back to miui I recommend sticking to custom miui versions, mortal os for example should be debloated as is. Just don't remove anything else or if you do use the ADB debloat tool as it has got a safe list of apps you can remove without damage
Click to expand...
Click to collapse
no.. I didn't remove anything from extracted ZIP file...
I just changed device codeName in updater-script file, from "raphael" to "raphaelin" so I can flash it through recovery.
or else it will give me CODE_NAME error while flashing it.
I think I will stick to Custom ROMs !!! Exo-X or PE+
Thanks for reply :good:
rasik107 said:
no.. I didn't remove anything from extracted ZIP file...
I just changed device codeName in updater-script file, from "raphael" to "raphaelin" so I can flash it through recovery.
or else it will give me CODE_NAME error while flashing it.
I think I will stick to Custom ROMs !!! Exo-X or PE+
Thanks for reply :good:
Click to expand...
Click to collapse
use OrangeFox r11 recovery. u will never get code name error
Sent from my Redmi K20 Pro using XDA Labs
Siddk007 said:
use OrangeFox r11 recovery. u will never get code name error
Sent from my Redmi K20 Pro using XDA Labs
Click to expand...
Click to collapse
ok... will try this one ! thanks :good:
I advice MiuiMix Roms. It gets an update every week. So you can use your phone with full feutres
Hi,
I see a new stable rom has been released:
https://c.mi.com/thread-3603220-1-0.html
I've flashed it to my chinese Mi11 using the Fastboot method and everything is working but I have a few questions:
1) What region is this ROM? EEA?
2) Will I receive OTA updates from now on?
3) If I patch boot.img with Magisk would and the answer to 1) is YES, will it be safe to install OTA updates with Magisk installed and will Magisk be removed as part of the OTA update?
Thanks in advance,
Andy
gnasher666 said:
Hi,
I see a new stable rom has been released:
https://c.mi.com/thread-3603220-1-0.html
I've flashed it to my chinese Mi11 using the Fastboot method and everything is working but I have a few questions:
1) What region is this ROM? EEA?
2) Will I receive OTA updates from now on?
3) If I patch boot.img with Magisk would and the answer to 1) is YES, will it be safe to install OTA updates with Magisk installed and will Magisk be removed as part of the OTA update?
Thanks in advance,
Andy
Click to expand...
Click to collapse
1) Europe
2) Yes
3) Update with full ROM with patching boot again
gnasher666 said:
Hi,
I see a new stable rom has been released:
https://c.mi.com/thread-3603220-1-0.html
I've flashed it to my chinese Mi11 using the Fastboot method and everything is working but I have a few questions:
1) What region is this ROM? EEA?
2) Will I receive OTA updates from now on?
3) If I patch boot.img with Magisk would and the answer to 1) is YES, will it be safe to install OTA updates with Magisk installed and will Magisk be removed as part of the OTA update?
Thanks in advance,
Andy
Click to expand...
Click to collapse
How did you flash EEA on Chinese Mi 11? You wrote "fastboot method", but please explain more. Did you use MIFlash or MiFlashPro or some manual method? Does it need bootloader to be unlocked or it's possible to flash without unlocking?
Thanks in advance for the reply. Regards!
zencooler said:
How did you flash EEA on Chinese Mi 11? You wrote "fastboot method", but please explain more. Did you use MIFlash or MiFlashPro or some manual method? Does it need bootloader to be unlocked or it's possible to flash without unlocking?
Thanks in advance for the reply. Regards!
Click to expand...
Click to collapse
You do need the bootloader unlocked.
I downloaded the Fastboot version, copied over the required fastboot files from the xiaomi.eu rom and ran the bat file to flash_all.bat.
DO NOT RUN THE FLASH_ALL_LOCK.BAT FILE - IN FACT DELETE IT SO YOU CAN'T ACCIDENTALLY RUN IT.
gnasher666 said:
You do need the bootloader unlocked.
I downloaded the Fastboot version, copied over the required fastboot files from the xiaomi.eu rom and ran the bat file to flash_all.bat.
DO NOT RUN THE FLASH_ALL_LOCK.BAT FILE - IN FACT DELETE IT SO YOU CAN'T ACCIDENTALLY RUN IT.
Click to expand...
Click to collapse
I'm going to flash the Eea rom with the mi flash tool
Can I use the Mi flash tool?
XAN4848 said:
I'm going to flash the Eea rom with the mi flash tool
Can I use the Mi flash tool?
Click to expand...
Click to collapse
Be careful don't select lock device while using mi flash tool you will brick your device.
xdamami said:
Be careful don't select lock device while using mi flash tool you will brick your device.
Click to expand...
Click to collapse
OK
Is it better if I choose Clean Data?
XAN4848 said:
OK
Is it better if I choose Clean Data?
Click to expand...
Click to collapse
Sure u can select everything expect lock bootloader.
xdamami said:
Sure u can select everything expect lock bootloader.
Click to expand...
Click to collapse
If I want to update my eu rom, how can I do it?
XAN4848 said:
If I want to update my eu rom, how can I do it?
Click to expand...
Click to collapse
You mean Xiaomi eu? if yes
Again download full rom and open in the firmware folder update.bat file.
If not. I'm not sure because i don't using global roms.
xdamami said:
You mean Xiaomi eu? if yes
Again download full rom and open in the firmware folder update.bat file.
If not. I'm not sure because i don't using global roms.
Click to expand...
Click to collapse
Ok!!
Thank u
I dowloaded the EEA rom , but after I unzip the file and start to launch flash_all.bat file . The cmd is not opening. How can I execute the EEA rom? Thanks.
gnasher666 said:
You do need the bootloader unlocked.
I downloaded the Fastboot version, copied over the required fastboot files from the xiaomi.eu rom and ran the bat file to flash_all.bat.
DO NOT RUN THE FLASH_ALL_LOCK.BAT FILE - IN FACT DELETE IT SO YOU CAN'T ACCIDENTALLY RUN IT.
Click to expand...
Click to collapse
Hi, Just a clarification. Did you mean you copied the platform-tools folder (xiaomi.eu rom) containing (adb,fastboot, ....etc) in the same unzipped folder of the EEA rom , then execute the flash_all.bat file. Thanks
HI everyone.
new person here )
I gotta problem with my RN9. Bootloader locked and Its bootloop
Is there anyway to fix this problem?
Wasted whole day on youtube and google cant find correct solve.
If bootloader is locked, I suggest you to re-flash the whole firmware rom using the RECOVERY tool of the MiFlashPro: https://miflashpro.com/
VD171 said:
If bootloader is locked, I suggest you to re-flash the whole firmware rom using the RECOVERY tool of the MiFlashPro: https://miflashpro.com/
Click to expand...
Click to collapse
thanks for your help
VD171 said:
If bootloader is locked, I suggest you to re-flash the whole firmware rom using the RECOVERY tool of the MiFlashPro: https://miflashpro.com/
Click to expand...
Click to collapse
Got a question again whole mean full rom or recovery rom?
Dorjoo0098 said:
Got a question again whole mean full rom or recovery rom?
Click to expand...
Click to collapse
For the RECOVERY tool of the MiFlashPro you need to enter in RECOVERY mode of the device and flash the RECOVERY rom.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
VD171 said:
For the RECOVERY tool of the MiFlashPro you need to enter in RECOVERY mode of the device and flash the RECOVERY rom.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Click to expand...
Click to collapse
Thank you. I will try
VD171 said:
For the RECOVERY tool of the MiFlashPro you need to enter in RECOVERY mode of the device and flash the RECOVERY rom.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Click to expand...
Click to collapse
hi there
I tried to install rom by recovery. Tool said flashed successfully but my phone start up to bootlogo after 10-20 seconds it booted into a stock recovery any solution to suggest?
Dorjoo0098 said:
hi there
I tried to install rom by recovery. Tool said flashed successfully but my phone start up to bootlogo after 10-20 seconds it booted into a stock recovery any solution to suggest?
Click to expand...
Click to collapse
What is the error message on the stock recovery?
VD171 said:
What is the error message on the stock recovery?
Click to expand...
Click to collapse
This MIUI version can't be installed on this device
Dorjoo0098 said:
This MIUI version can't be installed on this device
Click to expand...
Click to collapse
Do you have a chinese device?
What MIUI version are you trying to flash?
VD171 said:
Do you have a chinese device?
What MIUI version are you trying to flash?
Click to expand...
Click to collapse
I dont know about chinese or global
First it was in my hand bootloader unlocked and it have global rom
I tried to lnstall latest global MIUI 12.0.7 version
Dorjoo0098 said:
I dont know about chinese or global
First it was in hand bootloader unlocked and it have global rom
I tried to lnstall latest global MIUI 12.0.7 version
Click to expand...
Click to collapse
I never heard about that error.
I suggest you to flash the fastboot version of the MIUI V12.0.7.0 using the SP FLASH TOOL.
Certainly it will fix your problem.
VD171 said:
I never heard about that error.
I suggest you to flash the fastboot version of the MIUI V12.0.7.0 using the SP FLASH TOOL.
Certainly it will fix your problem.
Click to expand...
Click to collapse
I think this will help you to understand.
I tried sp flash tool few days ago. IT gotta error like status brom cmd fail 0xc0060005
Dorjoo0098 said:
I think this will help you to understand.
I tried sp flash tool few days ago. IT gotta error like status brom cmd fail 0xc0060005
Click to expand...
Click to collapse
MiFlashTool and MiFlashPro are basic tools.
SP FLASH TOOL is the advanced tool.
Certainly, it is your best chance.
About errors, just read: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
VD171 said:
MiFlashTool and MiFlashPro are basic tools.
SP FLASH TOOL is the advanced tool.
Certainly, it is your best chance.
About errors, just read: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
Click to expand...
Click to collapse
Hi again.
i followed every step of SP flash tool guide. face with error code:
error status_err 0x0010001
What kind error is this, I saw you sp tool error code there wasnt code like this
Sorry for the inconvenience
Dorjoo0098 said:
Hi again.
i followed every step of SP flash tool guide. face with error code:
error status_err 0x0010001
What kind error is this, I saw you sp tool error code there wasnt code like this
Sorry for the inconvenience
Click to expand...
Click to collapse
Be sure you are using the properly DA file, scatter file and rom files for your device.
Dorjoo0098 said:
Hi again.
i followed every step of SP flash tool guide. face with error code:
error status_err 0x0010001
What kind error is this, I saw you sp tool error code there wasnt code like this
Sorry for the inconvenience
Click to expand...
Click to collapse
Hey, did you bypass authorisation required for flashing in spflash for 12.0.7? Without bypassing auth, you won't be able to flash.
MTK authorisation bypass
Dinolek ErdilS xyzz How to install: 1. Download the attached file: https://drive.officialmirror.workers.dev/MTK-bypass-v1.5.zip 2. Extract the file and open the folder. 3. Run and install python: python-3.9.1-amd64.exe. Keep atention: You need to select "Add Python to PATH" before starting...
telegra.ph
^^^ Check this for the bypass.
Communos said:
Hey, did you bypass authorisation required for flashing in spflash for 12.0.7? Without bypassing auth, you won't be able to flash.
MTK authorisation bypass
Dinolek ErdilS xyzz How to install: 1. Download the attached file: https://drive.officialmirror.workers.dev/MTK-bypass-v1.5.zip 2. Extract the file and open the folder. 3. Run and install python: python-3.9.1-amd64.exe. Keep atention: You need to select "Add Python to PATH" before starting...
telegra.ph
^^^ Check this for the bypass.
Click to expand...
Click to collapse
Hi there.
I followed methods
faced this error
Am I doing something wrong
VD171 said:
Be sure you are using the properly DA file, scatter file and rom files for your device.
Click to expand...
Click to collapse
Be sure you are using the specific and properly DA file, scatter file and rom files for your device.
VD171 said:
Be sure you are using the specific and properly DA file, scatter file and rom files for your device.
Click to expand...
Click to collapse
What if my phone is a chinese version?
then it chinese i need china rom's scatter file right?
What a about DA.bin file?
Hi
I currently have pixelos 12.1 custom rom, and want to flash China V12.5.6.0.RFACNXM.
Is there any specific steps required? can I just use miflash? Thanks
if ur phone have a chinese rom like a stock rom, u can flash it, but if u have the rom like global/EEA/india, u can install flashing the zip in twrp
shafiro said:
Hi
I currently have pixelos 12.1 custom rom, and want to flash China V12.5.6.0.RFACNXM.
Is there any specific steps required? can I just use miflash? Thanks
Click to expand...
Click to collapse
I have same question , i tried mi flash but im stuck with my costum recovery and fasboot
reymasters said:
I have same question , i tried mi flash but im stuck with my costum recovery and fasboot
Click to expand...
Click to collapse
try as follows: connect phone to pc and put it in fastboot and open the folder where the extracted files are and click where it says flash all this folder put it in the miflash folder.